Specifying host string at connecting time
Hi everyone!!
I have 2 systems in my house. Both the systems have Oracle 9i installed in the Windows 2000 environment.
I am able to connect to the database without providing the Host String at the time of connecting on one system while on the other it raises a
ORA-12560: TNS:protocol adapter error
What do you think is the problem? Both the systems have the same Oracle services running.
Please help. I think this would clarify some of my problems regarding how Oracle services run.
Thak u all.
Define a registry key LOCAL with value "my_connect_string" in the registry subtree ORACLE_HOME of your SQL client
Similar Messages
-
How to identify the host string in Oracle on Unix
Help me out to identify the SID in Unix. When I try to connect scott/tiger@mydatabase, it results in error, previously I used to access. When I try connecting scott/tiger without host string it connects. Please help me out finding the host string. Working on Unix.
Thank you.echo $ORACLE_SID on the UNIX shell, this will tell you the sid that you are connecting to. you want to change the connect string
say
ORACLE_SID=<new_sid> then use sqlplus you will get connected to newsid. -
Oracle 10g SQL plus username, password + Host string unkown
Hi Friends
I have just installed Oracle 10g in my computer. I could not use SQL plus because I dont know the exact username, password and host string to connect. Is there anybody to help me out. I am bit stressed for this.. Thanks by HossainDo not reply to 5 year old posts. If you have a problem, start a post of your own, referencing the old one if necessary.
Describe your problem explicitly, giving all relevant information.
Please see Re: 2. How do I ask a question on the forums? -
Connection string & host string
Hello,
What is difference between connection string and host string?
Could someone please clarify it.
Regards
KrishnaIn tnsnames.ora file in host part whether we have to specify host name or host IP Address?
ORION.SSAPL01=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = [b]sagardomain.SSAPL01)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
or HOST = 10.15.1.111
Message was edited by:
KRKP -
I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance
The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.
-
Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
· We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
· And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
Thanks,
D.N. RanaHi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000 (26 Minutes)
"ReceiveTimeout"=dword:00dbba00 (240 Minutes)
"ServerInfoTimeout"=dword:00180000 (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana -
Hi everyone, i searched the forum and found same problem with me but i did not work for me. The problem is i cannot connect my sql plus. i enter my username and password then it asks me gor host string but when i type it and enter "ok" it says "TNS Listener does not currentl know of service requested in connect descriptor. i looked at my tnsnames.ora file and is exactly like this.
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
CSE348 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Canavar)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cse348)
So what shoul i type to connect sql plus?Given the tnsnames.ora content, the following needs to be entered for sqlplus in order to have it use that connection string in the file:
sqlplus scott/tiger@CSE348As you have not qualified the alias with a domain, it will default to "+.world+" as far as I recall. If the default domain in your local sqlnet.ora differs, than that default will be used to find alias CSE348 in the local tnanmes.ora file. So make sure that you do not mix default and explicit domain names. Rather specify a default domain in sqlnet.ora and use the same domain for defining full qualified domain name TNS aliases in tnsnames.ora.
As for the error - the Listener receives a connection request for a service called cse348 - and no such service has registered with it. You can check the known services of the listener using the "+lsnrctl services+" command on the server.
Often in this case, it is easier to request a specific database instance using its system identifier, or SID. In which case you can change your connection string for the alias to use a SID as follows:
CSE348 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Canavar)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = cse348)
)This assumes that the SID is cse348. The default SID is for example orcl. SIDs like dev and prod are also often used. -
[b]Listener problem while configuring host string through NET config[/b]
Hi,
I am unable to create host string through Net config. While testing with userid/password, the test does not succeed.
The host string configured is known as PROCESS.
Net config error message while testing the connection is as follows:
"Connecting...ORA-12541: TNS:no listener
The test did not succeed.
Some of the information you provided may be incorrect.
Press back to review the information provided for net service
name, or Change Login to change username."
Upon checking the status of listener from command prompt it gives following status:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Produc
tion
Start Date 08-JAN-2003 16:25:08
Uptime 0 days 16 hr. 9 min. 33 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\orant\network\admin\listener.ora
Listener Log File C:\orant\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Long postings are being truncated to ~1 kB at this time.Did you check that the DB is up ? If not, then check it and, eventually, start it up.
If yes, then open a DOS window, set your ORACLE_SID, connect to Sqlplus as sysdba and type :
SQL> show parameter service
what is the result ? -
Sonata Library Files Playing only internet connection time
Hi everyone.
My Problem ; Sonata Library Files Playing only internet connection time.When Internet connection not available sonata not playing my library files.
Thank you for helping.
MPD Conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "~/music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/Playlist"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "~/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "~/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "~/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "ceyhan"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
## device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "MASTER" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
Last edited by SYSTEMEDIC (2010-07-10 06:36:03)What is dropping I guess is the question? Is it wireless? Is it your WAN connection? You need to identify where the problem is.
To do that you need to try a few things.
1. If you use wireless then bypass it and use ethernet if that is possible.. even just drag things around so you can test if ethernet fixes it. If so and wireless is in fact the problem.. then you can do a few things.
2. Wireless issues with the 7.6.4 firmware are common. Did you upgrade about the time the problems started? I am afraid the bad news is, downgrading is not like in the past where it fixed things.. 7.6.4 seems to have some permanent effect on the TC and it is never quite the same again. How this is even possible I have yet to determine.
The usual fix is factory reset.
Set wireless with short names, no spaces and pure alphanumeric. Different name for 5ghz.
Make sure security is WPA Personal with pure alphanumeric password of 8-20 characters.. unless you are more paranoid.
Fix the wireless channels and test in order. 11, 8, 6, 1
And for 5ghz try the lowest channel, 36 and then a high one, around 150.
3. No improvement factory reset again.. downgrade to 7.6.1 or even 7.5.2 if it is an older Gen4 .. at 18months it might be old enough.. no harm trying. Factory reset again after the downgrade to see if we can get rid of the memory effect.. then try the above steps again.
No luck.. whatever the upgrade did it did permanently.. no fix is available until Apple pushes out a new firmware to fix what they did in the last one. Buy a different wireless router for now and use the TC in bridge just for TM backups. -
SOAP Adapter: Connection time out error
Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijayhi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low. -
I installed 9.0.1.1.1 on a Win2k PC with default setup using the Oracle Installer. Afterwards, I also installed the OEM on the same machine. For some reason, when I login to SQLPlus without specifying an Host String, SQLPLus always logins into the OEM instance, OEMREP. Does any one know where I can change the defaut Host String back to the original instance?
You can argue that there is no such thing as a default username, password, and host string for Oracle.
You can also potentially respond with instructions to try to log on as sysdba
sqlplus /nolog
connect / as sysdbaIf you are a member of the appropriate Oracle group you are now connected as user SYS. I do not consider this as a default user.
You should create and grant appropriate privileges to application and DBA usernames.
The default instance names for Oracle installed on Windows are XE for Express and ORCL for regular Oracle though this last can be changed.
HTH -- Mark D Powell -- -
Hi,
I have downloaded the Oracle 9i personal edition on a Windows98 system. When I am trying to run the sqlplus.exe file, it asks me for User ID,Passww, Host string. What host string am I supposed to give? Its a standalone application that I want to run Oracle 9i as. Please guide me.
Thank you.
Srikanth Turaga
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error MsgSQL*Plus Issue:
Right-click on the SQL*Plus short-cut that give you TNS error and see which executable it points to. Most probably this is the one in you newly installed Dev Suite directory.
Next, Check the contents of TNSNAMES.ora file in the following directory:
C:\DevSuiteHome_1\NETWORK\ADMIN
(whichever drive/disk you installed Dev Suite in).
This file must contain TNS entry of the database you intend to connect to using Dev Suite applications (Forms, Reports, SQL*Plus, etc). -
Oracle 10g dataguard Connect-time failover Parameter 15 minutes
Hello,
we running a system with DataGuard in Maximum Availability protection mode and one physical Standby Database. There are two connections between primary and standby. I configured listener and tnsnames to perform a Connect-time failover in case one connection is down. In first place it seemed to work fine but since it has happened that the primary always hangs for exactly 15 minutes until the failover is performed. (ALL redologs need archiving)
I think this must be the default value of a Parameter but reading docs for hours I can't find it.
Can anybody help me?
Best regards
FritzIt's like this. The connection failover I'm talking about is only between the primary database and standby database. I have two connections between them. That makes two addresses for the service (servicetostandby) specified in the log_archive_dest used by dataguard. In my case the log_archive_dest Paramater looks like this:
log_archive_dest_3 = 'SERVICE servicetostandby OPTIONAL LGWR SY
NC AFFIRM VALID_FOR=(ONLINE_LO
GFILES,PRIMARY_ROLE) DB_UNIQUE
NAME=standby REOPEN=10 NETTIME
OUT=9'
The tnsnames.ora entry looks like this:
servicetostandby =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = address1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = address2)(PORT = 1521))
(FAILOVER=true)
(LOAD_BALANCE=false)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby)
So if either address1 or address2 is down dataguard should use the other address to connect to the standby database.
Maybe because of the Maximum Availability protection mode the primary database does not perform if the standby database is not available. I'm not sure about that. But fact is that if I power off the standby database, the primary database hangs only for 9 seconds. That's specified in the net_time_out attribut of the log_archive_dest Parameter. So I'm quite sure that something in the oracle net service causes the problem.
With the "primary hangs" I mean: After the used connection (say address1) went down the redologfiles of the primary database get filled and then it stops for 15 minutes. The messages in the alert.log:
Thread 1 cannot allocate new log, sequence 1304
All online logs needed archiving
After 15 minutes the connection via address2 is established and everything works fine.
I hope I made myself clear this time and didn't confuse you totally.
Edited by: user633694 on Apr 14, 2009 8:13 AM -
Hi All...
I installes an add-on to SAP Business One (I created that ad-on using C# and created .ard file using Add-On Registration Data Generater)
and I got the system message "Add-on connection Time Out" plz help me to solve this matter.
regards
PadmaWhile creating final ard file dont use any connetion string .
1) REmove connection string.
2) Rebuild application.
3) Create ARD file.
Use below code for any ref.
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// Statment should be suficient for either development or run mode
'sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
sConnectionString = Environment.GetCommandLineArgs.GetValue(1) '
'sConnectionString = "5645523035496D706C656D656E746174696F6E3A59313931303035313531383699469FA92C3C9A964A219C5862952A90D911E9" 'Environment.GetCommandLineArgs.GetValue(1)'
Try
SboGuiApi.Connect(sConnectionString)
'// connect to a running SBO Application
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
Catch ex As Exception
MsgBox("Make Sure That SAP Business One Application is running!!! ", MsgBoxStyle.Information)
End
End Try
SBO_Application.StatusBar.SetText("DI is Connecting now", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
End Sub -
Auxiliary instance connection time out
Hi Experts,
I am creating a duplicate DB on oracle 10.2.0 on XP on a remote host.
first host (suman)is source and the second host(sumanr) is target means duplicate. in 2nd host i have installed the oracle software, created the pswd file, pfile, the instance and started in nomount. In 1st host DB is opened and running, now I am trying to connect to the 2nd host instance but getting following error..
RMAN> connect target
connected to target database: ORCL (DBID=1255758361)
RMAN> connect auxiliary sys/oracle@stby
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12170: TNS:Connect timeout occurredthe host string 'stby' is to connect to the 2nd host DB.
I have not mentioned any time out parameter in sqlnet.ora
Any help will be appreciated
RgdsAlways try to clone from Aux instance. as
rman target sys/****@orcl auxiliary /
Error: ORA-12170 (ORA-12170)
Text: TNS:Connect timeout occurred
Cause: The server shut down because connection establishment with a
client failed to complete within the allotted time interval. This
may be a result of network/system delays; or this may indicate
that a malicious client is trying to cause a Denial of Service
attack on the server.
Action: If the error occurred because of a slow network/system,
reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
sqlnet.ora to a larger value. If a malicious client is suspected,
use the address in sqlnet.log to identify the source and restrict
access. Note that logged addresses may not be reliable as they can
be forged (e.g. in TCP/IP).
Maybe you are looking for
-
Subsequent debit tax calculating wrong
dear guru while doing subsequent debit for the vendor the Excise duty is calculating wrong my issue is like this i have purchase 100 quty with value 10/kg total amount is 1000 for that ED is calculated 140 Ecess calculated 3 S&H calculated 1 i have d
-
URGENT..error when trying to access mod plsql link on intial 9ias server page
Can anyone provide me with a solution to my problem? When I finished my installation of 8.1.7.1(patchset)DB, then 9ias 2.1 I try to access the mod plsql link to access the server gateway. However the following error appears. 'You cannot login because
-
I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ". I tried adding username and password in the SMTP server settings,But those optiopns are greyed out. So, i am not able to en
-
Hi Gurus, can any one please explain what is the use of infotype 589--->Individual reimbursements in indian payroll. Thanks inadvance Regards Ramesh
-
I annot seem to find how to implement an auto launch of my Captivate tutorials on a webpage. Someone suggested that I could have the Flash Player download automatically when the weblink was clicked - anyone know how to do that? Thanks for any help.