Enhancements:Search help addition to standard screen-field

Hi Guys,
I am trying to add search help to the standard screen field inco2 in transaction va02. for this I am trying to add inplicit enhancement point in include MV45AFZZ.
I right click over the yellow line and create enhancement implementation in local object. the moment I choose my enhancemetn implementation and press enter, it gives me dump, Please nebody tell me where am I going worng, or Is my approach correct.....Please suggest.......
thanks in advance

Hi Anil,
Can you please tell me how to approach for adding search help to standard screen field INCO2 in transaction VA02.

Similar Messages

How to link a search help to a selection screen field

Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
Nibha

Hello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF

Adding search help (F4) for a screen field in standard screen of VA02

Dear Gurus,
I need to add a Search Help (F4) to a Standard Screen Field VBAK-VSNMR_V in the standard Screen of VA01/Va02.....Can anyone please guide me how it can be done.
Regards
Sajid
Edited by: shaik sajid on Feb 2, 2009 8:38 AM

Hi shaik,
Refer to the following useful link:
Search help enhancement in VA01
Hope this will help you...

Use search help to populate two screen fields

I've done a search on this and see that plenty of people ask this question but none get answers, hopefully you'll be able to help me out.
I have a selection screen with two fields:
data: s_house LIKE t012k-hbkid,
        s_account LIKE t012k-bankn.
I've created my own search help Z99FI_BANKN and attached it to field s_account. The search help has two fields:
BANKN - IMP, EXP
HBKID - IMP, EXP
If I click on F4 in field s_account and select an account, it populates s_account but not s_house. Can someone tell me where I'm going wrong? I'd like the one search help, when I select an account on field s_account to populate s_house too.
Thanks,
Gill

Gill,
Try the following.
First of all in your top include define your structure:
TABLES: Z99FI_T012K.
Second, open your structure, select BANKN, select the tab Entry help/check
and press the button Search Help. There you must match the fields from your structure with your search help parameters.
In my case it was:
ZLOAD_DESCR     ZZLOAD     ZLOAD_DESCR
ZLOAD_ID                     ZZLOAD     ZLOAD_ID
Also make sure that in your search help the field you are selecting on is checked as import and export and the field where the data must come along is checked as Export.
Now open up the graphical screen painter, and put on your screen
the fields from your structure. You can do this by opening the window Dictionnary / Program Fields window -> give in the name of your structure and press "Get from dictionary".
Place your fields on your screen, activate it and try again.
Thanks for your feedback on this.
Reward points if helpfull.
Best regards,
Tom.

Attach search help to a selection screen field

Hi All,
I have a parameter p_kschl like nast-kschl in my selection screen.
My requirement is whenever sales org equals to '3' i need to set p_kschl
default ZE02 and make a picklist available with ZE02 and ZE04 available with the descriptions
How to make that picklist having ZE02 and ZE04 with descriptions.

Yes, then you will use a FM like [F4IF_INT_TABLE_VALUE_REQUEST|https://forums.sdn.sap.com/search.jspa?objID=c42&q=F4IF_INT_TABLE_VALUE_REQUEST]
But as this event is in the POV, data may have been changed to screen and not yet in the program, so you will need to use FM [DYNP_VALUES_READ|https://forums.sdn.sap.com/search.jspa?threadID=&q=DYNP_VALUES_READ&objID=c42&dateRange=last90days&numResults=15&rankBy=10001] to get current value of some fields on the screen (sales org.). (and [DYNP_VALUES_UPDATE|https://forums.sdn.sap.com/search.jspa?threadID=&q=DYNP_VALUES_UPDATE&objID=c42&dateRange=last90days&numResults=15&rankBy=10001] if you want to change the current value of another field on screen)
Regards,
Raymond

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Search Help - Standard Screen Field: ME21n / ME22n

Helow, experts.
I have to create a search help in the standard screen field "Our Reference" (UNSEZ) in the tab Communication to ME21n / ME22n, anyone could say me how can I code it?
To populate this search help, I have to use 3 different tables.
Thanks

hi shatish
code here in screen flow logic it will fire on F4 pressing.
PROCESS ON VALUE-REQUEST
module value_help.
in program
module value_help.
populate the itab.
CALL FUNCTION 'POPUP_WITH_TABLE'
                EXPORTING
                  ENDPOS_COL         = <colvaluea>
                  ENDPOS_ROW         = <colvaluea>
                  STARTPOS_COL       = <colvaluea>
                  STARTPOS_ROW       = <colvaluea>
                  TITLETEXT          = 'VALUE HELP'
              IMPORTING
                CHOICE             =
                TABLES
                  VALUETAB           = itab
              EXCEPTIONS
                BREAK_OFF          = 1
                OTHERS             = 2
              IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF.
endmodole.
regards
shiba dutta

Creating a new Search Help on a standard SAP table field?

Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!

Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Search Help to display 2 different fields/values

Hi Everyone,
I am going to use a search help for a certain screen transaction using a search help. A certain input field should have an F4 function (using list box). The values to be displayed after F4 input should be the Business Object type and BP number. This input field is can display either of the two fields.
How can I do this? Do I need to create a new search help for this? Business Object is from table SWOTIP field OBJTYPE and BP Number is form table BUT000 field PARTNER.
Kindly help me on this.
Thanks and regards,
RE

Hello Ashish,
The input help should have two possible values. It may be the Org unit number or the Business Partner number.
As for my experience in search help, the only thing I know about it is to set a reference db table then the field which is to be displayed during F4. For example, an input help requires a Plant number, the search help will have a reference table (selection method) T001W and a parameter of field WERKS.
What if the input field can contain either an org unit number OR a business partner number, how should I create the search help? What should be the selection method (table name) to be filled? Is it the BUT000 (for bus partner) or HRP1001 (for org unit)?
Thank you very much for your attention.
Regards,
RE

Assigning search help (F4 functionality ) for recipient field in IW32

Hi,
my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

hi,
refer to the following link:
http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
i hope it helps
regards

To implement search help for date and time fields details

how can i implement search help for date and time fields in screen painter

Hi
Declare the variables as sy-datum and sy-uzeit or any other pre-defined data typ of date and ime types. Serach help will automatically comes.
Aditya

How we can attach search help directly to the table field / structure field

Hi All,
Can you please let me know the step by step procedure of How we can attach search help directly to the table field / structure field.
Regards,
jaya

Hi Jaya,
1. Create a search help using SE11.
2. Include this search help in the field of table in SE11. There is a tab in the table defination where you can specify the search help.
Even you can specify search help at data element level, screen field level.
Reward points if useul.
Regards,
Atish

Collective search help not working in screen

Hi All,
I need to create ANLA-ANLN1 & ANLA-ANLN2 Fields in a screen for five times.
One time i can get from dictionary, it automatically takes search help.
While for other fields as it is not accepting from dictionary i have given different names and Provided collective search help in Properties. But it is not working as it is working for fields got from dictionary.
Your help is valuable.
Regards,

Hi,
Please follow this link.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/searchHelpExit

Adding elementry search help to SAP standard Collective Search help

Hi,
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and activated to it.
it got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A.
How can i do that?
can i add it directly to MAT1_A (sell --->search help <MAT1_A> changes --> in included search helpss tab using + (insert icon) )
Thanks & regards

I solved my problem :
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and copied Database View M_MAT1M to ZZ_M_MAT1M and addedd same fields and activated both.
both got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A and this Z-search help shd appear on the first tab.
so I just went to collective search help MAT1_A in change mode --> click on "+" icon addedd my ZZ__ search help, save and activated it.
If you dont really care in which tab your search help shd appear, then the best option is to use Append Search help.
Note : if you are directly adding your search help in collective standard search help, then its better to remove hotkey form your custom elementry search help, as, if not remove will lead to warnings or make sure that you have unique hotkey in that collective search help.

Enhancements:Search help addition to standard screen-field

Similar Messages

Maybe you are looking for