Enlarge image from picture box when hover over

Hi,
I am just hoping i could get some help on something small that i can not seem to get to work.
I have a picture box, and when i hover over it i would like to change the image to a larger one. I am guessing that is how they give a interspersion of image been magnified when been hovered over.
I was going to use the mouseHover event but have read that it would not change back to the old image so i hacve used the mouseLeave & MouseEnter events but i does not seem to change the image.
Any help would be appreciated.
private void returnToNavPB_MouseLeave(object sender, EventArgs e)
this.returnToNavPB.Image = Properties.Resources.back_icon;
private void returnToNavPB_MouseEnter(object sender, EventArgs e)
this.returnToNavPB.Image = Properties.Resources.Largeback_icon;

Have you checked that these functions are actually executed (by putting some breakpoints or message boxes)? Also check that Largeback_icon and back_icon are different images in resources.

Similar Messages

Is there a way to prevent an image from turning blue when selecting it?

I'm exported a pdf from InDesign that will be used as a brochure for one of the exhibitions at our museum. I'm wondering if there's any way to prevent an image from turning blue when a reader clicks on it. Since all of the images are works of art, I'd rather that they not change color when people click on them.
I changed the security settings so the images couldn't be copies, hoping that would prevent the blue square, but it didn't help.
thanks for any suggestions.
Chris

There are several ways to do that and here are but two of them.
1. If you want to make a new image you can right click on the channel, click on Duplicate Channel and under Destination>Document, select New
2. If you want to add a new layer to your document, click on the channel in the channels panel, go to Select>All, then Edit>Copy, click on RGB in the channels panel and then Edit>Paste

Can i change the cursor icon when hover over an active link by another one ?

Can i change the cursor icon when hover over an active link by another one ?

i have multiple links,so is there a way to have the custom cusrsor work on all links in a page and not just one?......you can see here i have 3 links..but only the top one changes to the crosshair cursor when rolled over http://prntscr.com/5oxkj6
actually it seems its not working on multiple instances of the same button.
nvm found out why,lol...it was because i ndidnt have an actual link associated with the other instances of the button....all good now:)

How do I stop text from changing colour when hovering over it?

Hello, I have downloaded a template for Dream Weaver CS6 (Which is the version i am usig). When you hover over one of the boxes the top text changes colour to black instead of staying white... does any one know how i can make it so the text stays the same colour. I will post a print screen of it.
Before clicking:
View image: 1
When hovering over it:
http://postimg.org/image/wdsii9mab/
I will post the code of the index page aswell: <!DOCTYPE html> <html lang="en"> <head> <title>Home</title> <meta ch - Pastebin.com
Any help is appreciated. Thanks.

Your unwanted pink hover color comes from style.css line 181 here
.btn_{
    background: none repeat scroll 0 0 #cf3046;    border: medium none;
    border-radius: 3px;
    box-shadow: 0 3px 5px rgba(0, 0, 0, 0.2);
    color: #ffffff;
    font-family: "Open Sans",sans-serif;
    font-size: 12px;
    font-weight: bold;
    line-height: 15px;
    margin-top: 20px;
    padding: 7px 13px 8px;
    text-decoration: none;
    text-shadow: none;
    text-transform: uppercase;

Images for picture box

I have to create a system configuration control for our machines.
What we are going to have are a lot of images (about 50 or so) that will be displayed as the operator selects different sub-systems to configure.
We started with a tabbed index, used "drag-n-drop" to put a different image on each tab of the front panel, then used the block diagram to switch from one tab to the next. So, in our block diagram, there is an enumeration wired to a Tab Control property-node for *each* change to the tabbed index.
Here is the problem: When we add new tabs to the tabbed index control (future features, etc.), the Tab Control enum changes, and the wire from the Tab Control enum to the Tab Control property node breaks.
Fixing these broken wires is tedious.
We can drag-n-drop the images directly onto the block diagram, and this would be an acceptable solution if we could find out how to get the images on the block diagram to load into a picture control.
Most of the images have to be sized to fit, so we don't want to have them dynamically linked to a folder. It would be best if we could place all of our images onto either the front panel or the block diagram, then load those into a picture box (or something similar) whenever the image is needed. But, for images dropped on the block diagram, there are no wires to connect them with a picture box.
Any thoughts? Suggestions?
Attached file is saved in 8.2 format.
Angus Cattle from Pool Ranch and Steel Repairs via Joe's Welding.
Attachments:
Calibration.vi ‏104 KB

I would suggest creating a typedef'd enumeration. This is a control (.CTL file) that consists of an enumeration and it's Status set to typedef
When you drop instances of this typdef on your block diagram OR fron panel, it is LINKED to the CTL. Any changes made the the CTL will AUTOMATICALLY update the instances on your fornt panel and block diagram.
When you add an item to your typdef'd enum, your Tab Control and your case statements will likely break, but you can usually use Add Page or Add Case and move forward. Your existing enums in the other cases should update.
LabVIEW wiki: Type Definition
LabVIEW wiki: Enum: Potential Uses
Message Edited by Phillip Brooks on 01-02-2008 12:28 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Attachments:
typdef.gif ‏9 KB

Error while deleting image from picture library

Facing issue in deleting pictures from picture library from a site collection created in SharePoint 2010 mode in SharePoint 2013. Though we can open the picture and delete it from 'Delete Item' from the ribbon, we cannot delete the pictures from Actions
-> Delete option.
Here is the exception
Level:Medium Category: General
Application error when access /_layouts/DeleteMu.aspx, Error=Object reference not set to an instance of an object.   at Microsoft.SharePoint.WebControls.DeltaPage.LoadPageStateFromPersistenceMedium()
at Microsoft.SharePoint.ApplicationPages.DeleteMultipleItemPage.<LoadPageStateFromPersistenceMedium>b__0()     at Microsoft.SharePoint.ApplicationPages.LoadViewStateHelper.LoadViewStateOrNull(Func`1 loadPageStateFunc)
at System.Web.UI.Page.LoadAllState()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi Shivayogi,
Whether you migrate SharePoint 2010 to SharePoint 2013, and kept in 2010 mode.
If yes, please create a new site collection, then test again, compare the result.
Whether other libraries could work correctly.
Whether this issue occurres for 2013 mode site collections.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Yellow pop up box when hovering over links missing in CC?

The behavior when hovering over links in the Links Panel in CS6 was a yellow pop up box with the full path of the link displayed.
I find that is not the behavior in CC and I am really missing that.
Have I missed a setting somewhere to enable this in CC?

That was it.
Tool tips was not enabled. Enabling it brings back the yellow box. Didn't really think of that as a tool tip.
Thanks

Yellow Box when hovering over links

Hi All,
I have read a few discussions surrounding the 'yellow box' that appears when hovering over links in safari. Last I read some time ago revealed this is an intergrated 'feature' of safari. Is this still the case?? Or have enough users complained to have this 'feature' squashed (fingers crossed.....)
Thanks

You may keep your fingers crossed. Hovering produces the yellow information box.
Ciao.

How do I make it so picture expand when scrolled over?

I would like the abillity to have a picture expand when someone scrolls over it or clicks it. Is this possible in Muse?

The easiest way is to use the Lightbox gallery or the Tooltip Composition Widget.

Turn off metadata display box when mousing over photos?

When mousing over photos in the viewer or browser, a box pops up next to the cursor showing metadata. I find this very distracting and annoying when editing a photo or confirming faces. In Aperture 2, you could turn it off under preferences, but for the life of me I can't figure out how to turn it off in Aperture 3 (metadata has a separate tab rather than controlling the viewing of metadata under preferences in A2). Hitting the letters Y and U work in the viewer and browser, respectively, but only for one photo - doesn't stop it for good. I've tried messing around with all the other metadata view settings. Any ideas?

Hitting the letter T toggles the display, you can adjust this setting with Command -J.
HTH
wok4

Deleting images from CF-card when imported

Hi.
Have any of you been able to find a feature that deletes the imported images from the CF-card, so you don't have to manually delete images them from the CF-card.
Regards, Matias V

There isn't at tis point. Consensus view it that it's best to delete/format in camera.

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

In LinkedIn, show a tag with persons name when hover over a picture like Outlook Express?

Can Thunderbird do that?

Using Thunderbird will make a small difference "because we heard that TB is more resilient to attacks. " partially because it does not support the use of javascript VBScript etc in mail. Incidentally the same reason your little tags do not appear.
Seriously, in the big scheme of things, it is a little like putting your finger in the dyke. Using Thunderbird will be a little tiny bit more secure, but using a free Linux operating system would obviate all of the problems of unsupported operating systems completely at no cost. At a Consumer or Business level the only justification for continuing to use XP is hardware or software that will not run on another operating system and even then steps should be taken to isolate the device from the Internet. That is no mail and no browsing on an XP computer, for that matter no automatic software updates either!

How can I keep my images from being deleted when using Image capture. Even when I do not check the box they still get deleted.

This happened after I updated my operating system.

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

Pic Zoom when hover over it??

Can anyone help me? I need a script or a way to make a photo
zoom or enlarge when mouse hovers over it. Is it done in
dreamweaver or flash??
PLEASE HELP
An example can be found here
http://www.robcousens.com.au/index.php?page=cat_index&cat=112
Cheers

Use two pictures - one small, the other larger. Search the
script sites for
ways to make it look like it's zooming when the images are
swapped.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Durico" <[email protected]> wrote in
message
news:fh0orr$c9a$[email protected]..
> Can anyone help me? I need a script or a way to make a
photo zoom or
> enlarge
> when mouse hovers over it. Is it done in dreamweaver or
flash??
>
> PLEASE HELP
>
>
> An example can be found here
>
>
http://www.robcousens.com.au/index.php?page=cat_index&cat=112
>
> Cheers
>

Enlarge image from picture box when hover over

Similar Messages

Maybe you are looking for