Enter at least one partner of type Location Or Goods Recipient (Item 1 )

Hello
Can anyone help here
We are using Extended Classic and SRM 4.0,
Getting the following error messages when trying to create a shopping cart
Enter exactly one partner of type Requester (Item 1 )
Enter at least one partner of type Location Or Goods Recipient (Item 1 )
I have checked the Org Structure and everything seems to be fine
Does anyone have any ideas how to solve this
Many Thanks
Prakash

Hi
Please check your Enhancements (customer specific Business Addins) because this is a clear logical error. The same partner function is added twice, hence it must be deleted programmatically in the enhancement logic.
We have faced a similar problems in our past previous Implementations.
Incase nothing works, then what I recommend you, in the BBP_DOC_CHANGE_BADI Implementation, go into BBP_SC_CHANGE & BBP_CT_CHANGE methods,
and write the following lines..
SORT et_partner by partner_id partner_fct.
DELETE ADJACENT DUPLICATES from et_partner COMPAIRING partner_id partner_fct.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Similar Messages

URGENT:SC creation: "Enter exactly one partner of type Sold-to Party" ERROR

Hi all,
we have a very urgent problem.
We are migrating to Production environment and in contract and SC creation we get the error:
"Enter exactly one partner of type Sold-to Party".
In Test environment this error never appear.
We are trying to debug without success till now.
SAP SRM 5.0 with ECS.
Thanks
#Bill J.

Hi
We have faced a similar problem in our previous Implementation.
What I recommend you, in the BBP_DOC_CHANGE_BADI Implementation, go into BBP_SC_CHANGE & BBP_CT_CHANGE methods,
and write the following lines..
SORT et_partner by partner_id partner_fct.
DELETE ADJACENT DUPLICATES from et_partner COMPAIRING partner_id partner_fct.
Hope it will help.
Regards
- Atul

Enter at least one number for the business partner

Hi Experts,
SRM 5
Classic scenario
R/3 4.6c
I am trying to execute users_gen transaction for integrating the user with the org. structure. However upon doing so I get an error message "Enter at least one number for the business partner"
Please provide pointers on the cause for this and how it can be rectified.
Thanks.
Regards,
Amish

Hi Muthu,
I am integrating a single user at a time - through users_gen.
Infact I am getting the same error message while moving the users within the org. structure.
Steps -
1. Execute users_gen
2. Select the user to be integrated
3. Click execute check mark
Please provide any pointers.
Regards,
Amish

Error: Enter exactly one partner of type requester

Hi experts,
I am creating a BID, when a tyr publish the BID a getting the error "Enter exactly one partner of type requester".
How could I solve this problem ?
Thanks,
André
We are using SRM 4.0 -
Suporte Packages: SAPKA64017 and Server SAPKIBKS09.

Hi
SRM 5.0 is an inteligent system .Requestor populates automatically when you create a bid inviatation.
When you create a Bid inviatation , in header partner data must automatically populates your name
EDUARDO ANDRADE 12345 as a requester . it is standard.
it may be first time you create a bid inviatation . just search your name as a requestor.
I recommend you to add your name as requester.
i believe in the next time onwards it will populate EDUARDO ANDRADE automaticallly. if it not so it could be a bug
howerever check bbp_pd 428 in SE91 and did you influence any error message ?
regards
Muthu

Enter exactly one partner of type vendor

Hi
We are getting this error while assigning a vendor in the SOCO for a SC.
"enter exactly one partner of type vendor"
Anybody knows why this is happening, even though vendors are replicated correctly in SRM4.0
Regards
Reddy

Hi Reddy,
This error message could be generated because:
- the new vendor is assigned in addition to an existing one, and there should be only one vendor assigned...
- the new vendor is not valid for the SC item and is rejected so there is no vendor assigned. It may be because of purch org, vendor blocking flags...
I think this is because of the 2nd reason (in the first one, the vendor should replace the old one).
Check the vendor data against SC item data.
Rgds
Christophe
PS: please reward points for helpfull answers

Enter a country for partner with type 'Sold-to Party'

Hi
when we try to send Delivery Scheduld to SUS from R/3 thro
Idoc "DELINS" we are getting the following error on the SRM side
An error occured within an XI interface: Exception
occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to
Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party
I:R5:553 -'Different country' field contents deleted because identical
to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order
7500000062 ) Programm: CX_BBP_BD_ERROR===============CP; Include:
CX_BBP_BD_ERROR===============CM002; Line: 57
we also tried referring the note 987569, we are on SP as follows
SAP_BASIS SAPKB70010
SRM_PLUS 550 SAPKIBK007
SRM_SERVER 550 SAPKIBKT07
regards,
Anand

Hi
We have faced a similar problem in our previous Implementation.
This is happening in some cases, where the configuartion settingas are not correctly done.
After several tentatives, I managed to solve it activing on the Customizing for Multicompany in one client.
I have accessed to table BBPC_MARKETSET (Status of selection in a market set system) through SM30 and I have just removed the flag "Configure Market Set Procurement".
Also, another option,
check your Enhancements (customer specific) because this is a clear logical error.
The same partner function is added twice, hence it must be deleted programmatically in the enhancement logic.
FYI.. I usually encountered same type of issues in almost every implementation.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Error msg: Enter at least one condition item

Hi SAP,
I try to change (extend) rental end date but i received error msg "Enter at least one condition item":
Enter at least one condition item
Message no. 62226
Diagnosis
No condition items with a positive amount exist. Each condition header, however, must have at least one condition item.
System Response
The system may or may not carry out the function you selected. If the function cannot be executed, the system will output an error message indicating that a condition item is necessary.
Procedure
If the system does not execute the function you selected, you must enter a condition item or an amount for at least one condition item before you choose the function again. Each condition header must have at least one condition item at the latest when you save your inputs.
Actually i had maintained the condition type eg: Electricity (variable type) but with "$0" amount. But i have maintained the sales based rent inside the condition item with minimum rent $2.
My question, is there any way i can proceed with the rental end changes with the condition or scenario i mentioned above?
I will give points for those who help me solve this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
please use transaction FO38 (change active lease-outs) and there set the flag 'cond. not checked'. With double-klick on the flag you can make it changeable. Afterwards the error message should not appear anymore.
Hope that helps.
Regards, Franz

Purchase Order Response Error : "Enter at least one item"

Hi there,
While trying to confirm a PO response in SRM 7 I am getting the following error:
"Enter at least one item"
But when I do a check on the PO response it says:
Purchase order response - 0030000035 is correct
Any ideas what could cause this error?
Thanks for the help
Lynton

Hi there,
I have no idea what you are asking with the limit po?
Lynton

Intercompany posting issue: "enter at least one item in leading company cod

hi can any one resolve this
intercompany posting issue: "enter at least one item in leading company code XXX"
i am tring to post the intercompany trasaction iu am geting the above message...........

Hi,
Can you provide me OBYA settings between these two entities and posting parameters you used to get this error message ? This will help me to understand the problem better.
Best Regards,
Madhu

SC Template error: "Enter at least one item or one limit"

Hi,
When creating a Purchase Order,based in a Shopping Cart Template, when we add the item to the Purchase Order, we are getting this error that does not permit to continue:"Enter at least one item or one limit". This error looks a mistake, as we are only trying to transfer an item.
Sounds familiar?
We are using SRM v5.0.
Thanks,
Maria

Issue solved with the following Notes Implementation:
Notes: 1054481; 1054487; 1179589 ; 1381642 and 1435295

(0, 0) Activity 'ID463' validation failed: An IfElseActivity must have at least one child of type IfElseBranchActivity.)

i have the following workflow inside SharePoint designer:-
but when i tried publishing the workflow i got the following error:-

Hi John,
Designer workflow doesn't accept multiple Else If conditions. Modify the workflow to have 'If - Else If' and then try to publish. In other words 'If' condition should have only one 'Else If' condition.
Note:
after modifying the workflow, save and close the designer. Clear the cache at the following folders and then open designer and publish the workflow.
C:\Users\loggedin-id\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache OR %AppData%\AppData\Roaming\Microsoft\SharePoint
Designer\ProxyAssemblyCache<o:p></o:p>
C:\Users\loggedin-id\AppData\Local\Microsoft\WebsiteCache OR
 %AppData%\ AppData\Local\Microsoft\WebsiteCache
C:\Users\loggedin-id\ Roaming\Microsoft\Web Server Extensions\Cache OR %AppData%\Roaming\Microsoft\Web
Server Extensions\Cache
Thanks
Senthu
Please mark as 'Answer' if it resolves your query or 'Vote' if its helpful
so how i am going to write this ? i though adding multiple If-else will work inside SharePoint designer.. so how i should chnage my workflow, not sure , as i have three different if statements??

Error in FMJ2 (Enter at least one document line)

Dear,
I want to carry forward budget amount for Open Item to next year,
at the time of FMJ2 System showing above error
Please give suggestiion
Nilesh

Hi
Possible reasons could be:
- You have no authorization for these line items
- You have activated criteria that exceed the initial screen (by means of the 'Further selection criteria' function).
Check the authorization with TCODE: SU53
SKS

Enter only one business partner of type supplier

Dear SRM experts,
We are facing an error and can´t solve it, maybe you can help.
When we try to create a purchase order based on a shopping cart personal model, an error (Enter only one business partner of type supplier) appears.
- All items in the shopping cart are from the same supplier.
- Supplier is correctly created
- Documents (bbp_pd) seem to be alright, no errors
- In the Shopping cart cockpi, no errors also.
What else can i try to check? what could be the reason for such error?
Thanks in advance,
I really appreciate your help,
Joã

Hi Joe
How many vendors are pointing to shopping cart ?
did you enter prefered vendor as well as fixed vendor too?
partner function 19 and 39 - did you see in the shopping cart bbp_pd
is it old purchase order template?
is it happening for all POs?
can you recreate the same issue in development server with all same data vendor? sc data must be same as production.
muthu

Message: Enter a country for partner xyz with type 'requester'

We are using SRM Server 500.
I am customizing a new installation. When I create a SC in classic scenario using "Describe Requirement" I get following messages:
"Enter a country for partner 0000000081 with type requester."
"Enter a country for partner 0000000081 with type goods recipient."
I didn't enter a source of supply, the partner number 0000000081 is a BP that belongs to the user in who creates the SC, as I can see in ppoma_bbp.
All org-units are matched up in TA BBP_BP_OM_INTEGRATE.
In TA BP I checked the address of 0000000081. Everything is ok, country is entered. What I cannot find is Partner type 'Requester' or 'Goods Recipient' in TA BP.
I never had this Problem befor and I customized a few SRM, EBP, BBP, B2B systems. Has anybody an idea?
Thank you for your response.

Hi BERTRAND,
one of our users is also facing the same issue when she is trying to cancel one confirmation in srm 7. DO you have any idea how can i check the consistency of the user in SRM7 as BBP_CHECK_USERS are not working in my SRM7 system.

Creating several roles for one partner

Hi everyone !
I have created a partner with a role (=employee) . Then I wanted to create a second different role ( = physical person) for that same partner, but when I try to save the role in BP, I get an error message ;
the message is "Enter at least one tax number for the business partner"
Normally there is no tax number requirements for physical persons, only for organizations, so I don't understand where that message comes from. Is it due to the fact that I tried to create 2 roles for the same partner?
Any helpful hints on this will be rewarded !
Many thanks.
C.K.

Hi,
Its definitely not because of 2 roles . You can assign as may roles. This message is because in the customzing there must be some setting for physical person role.
You can get rid of this by follwoing steps
go to transaction spro
Cross application components->sap business partner -> business partner ->field grouping -> configure field grouping per role. Double click on the role Physical person. Double click on dataset BUTC01. On the right side choose the radio button hide or optional. Now the message will not come.
Wram regards,
Smita.

Enter at least one partner of type Location Or Goods Recipient (Item 1 )

Similar Messages

Maybe you are looking for