ENTER MORE C.I.D. IN CO11N

Dear guru.
A specific operation of the production order is executed with two or three persons.
The system allow to enter only one c.i.d. for every confirmation.
I need to enter more personnel number in the same confirmation.
How can I specified this in CO11N ?
Thanks for you help.

Dear ,
One work around can be use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose.Take help from the ABAPer for this enhancement .Hoever , if you have SAP HR then you can try to adop the SAP's Incentive Wages functionality linked with HR and PP .
Refer : How to Create a Personnel Number
In Standard SAP CO11N screen you have opertunity to put one personal number .You can try the above work around or use any other fields like long text in CO11N screen to enter the multiple personal number with comments .
Regards
JH

Similar Messages

Enter more than one personnel number for the same confirmation in CO11N

More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva

How to enter more than one bind variable

Hello,
i use bind-variables to pass parameters from one application to another through links. On the SQL-Query-Tab it says that i can enter more than one bind-variable, but i don't know how to do it.
my sql-statement looks like this:
SELECT column
FROM schema.table_name
WHERE v_variable = :bind_variable
I don't want to put a second bind-variable in the where-clause.
thank you
Ralf Schmitt

Hi Marcel,
thanks for your help.
What I want to do is pass a parameter to a report that is not part of the select-statement
Example: a simple blackboard
User selects a category and receives a list of items in that category. now i want to pass the category_id AND the category_name.
The select on category_id produces the item-list, the category_name is shown in the header of the html-page.
A question to the code you submitted:
WHERE v_variable in (:bind_variable1, :bind_variable2, :bind_variable3 etc)
is v_variable an array? How do i select with such a where-clause?
Thank you,
Ralf

Dont allow user to enter more than specified number of digits/chars?

Hello
First case: I have placed a TEXT field on the form. Now i want to put the below validation,
1) User has to enter only numbers (no decimals)
2) Only 10 digits
If not i need to
1) Alert app.alert
2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
2 digits as prefix to decimal
2 digits as suffix to decimal position
example, 35.88
Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

HELP! TextField "NUMERIC" dont let me enter more than 9 digits

Hi there,
Firstly: I 've search for this question, and I ve found an old post very similar to it.
(here is it: [http://forums.sun.com/thread.jspa?messageID=10706126] )
But, unfortunately, the aswerings did not satisfy me...
The problem is:
I have a TextField that should receive a Credit Card number, meaning, it has to have 15 or 16 numbers.
If I set it as "NUMERIC", when I run the app on my real cellphone (a SonyEricsson w810i), it dont let me enter more than 9 digits. Stringe thing here is: but on emulator, I could...
txtCardNo = new TextField("Card Number", null, 16, TextField.NUMERIC);Instead, if I set it as "ANY", user can type up to 16 numbers, but the problem is that field will accept ANY character, and I dont want that way: I want that this field input acts accepting only numbers.
How could I fix it?
Shall I use a function to mask this field? If yes, how?
Or this could be a problem of JVM implementation on this particular cell phone?
Please, send me any examples and/or links.
Thanks very much.
=Marcello=
PS1: I am quite newbie on Java things...
PS2: I am working on this using NetBeans 6.5.1 and Sun Java(TM) Wireless Toolkit 2.5.2 for CLDC

Yuo can set an ItemStateListener to the Form containing the TextField, and validate the user input in itemStateChanged(...). In case of invalid input, I would show an Alert with an appropriate message, and blank out the content of the TextField (or set it to a default value, as appropriate).
db

Validate that user should not enter more than specified number of digits/chars?

Hello
First case: I have placed a TEXT field on the form. Now i want to put the below validation,
1) User has to enter only numbers (no decimals)
2) Only 10 digits
If not i need to
1) Alert app.alert
2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
2 digits as prefix to decimal
2 digits as suffix to decimal position
example, 35.88
Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

Cannot Enter more than 1000 partners in Customer master data(Partner Funct)

Dear Friends,
In Customer Master Data -> Sales Area Data -> Partner Functions-> I can able to enter 1000 partners.
Now When I am trying to enter more than 1000 partners, system is not allowing me(no lines are available to enter partner)
According to my requirement I have to enter another 500 partners(business requirement)
Please suggest me how can I able to enter more than 1000 partner in customer master.
Quick reply will be appreciated and rewarded.
Thank you

Hello,
It is very clear that, unless you change the Data element for KNVP-PARZA, the system will not allow you to maintain morethan 999 partner functions for a cusotmer master.
This is very exceptional case and I handled the situation in my project with the Duplication of customer master data for Sold to party and maintained the remaining partner functions over there.
Please check with your Business/ Architect team whether they allow this. As an alternative, they have to go with duplication of sold to party for the maintanance of additional ship to parties.
OR
Should go for char length changes for data element KNVP-PARZA (NOT RECOMENDED).
Hope it helps. Let me know if not.
Thanks,
Ram.

Is it possible to enter more than 333 items in a physical inventory Doc.?

Hi Gurus
I want to enter more than 10000 line items in a physical inventory document. how can I achieve this please help. We are using SAP IS Retail.
Regards
Muneer . V.K

Hi
We are using PDA device to enter counted qty before that we will arrange all articles based on MC and we will distribute the work to different counting teams. We have a Z program developed for PDA with following logic.
Pseudo Logic
1)     Application is used to create Physical Inventory Count.
2)     There are 2 options provided for physical Inventory Count
      i) With Reference of Physical Inventory document
      ii) Without Reference.
3)     If with reference is chosen , Inventory document no. is available for input
4)     If stock type is entered in without reference then vendor is mandatory for input.
5)     User can enter the site, storage location and the following validations will be done on these screen inputs
u2022     Validate the site against SAP entry and check whether the ser has authorization in the site
u2022     Validate the storage location
u2022     Validate Vendor if entered
u2022     Validate Physical Inventory doc no. if entered
6)     In second screen, user will scan EAN/UPC number of the article and the following validations will be done.
u2022     Validate the EAN/UPC number. Check whether the number is available in SAP
u2022     Check whether the article is extended for the site
u2022     Get the base unit of measurement for the article
u2022     Get the article description from the table
u2022     Get the conversion factors for the barcode unit of measurement
u2022     Get Stock on hand for the article
7)     Perform the following validations on the unit of measurement input
u2022     Check whether the unit of measurement is available in the system
u2022     Check whether the unit of measurement is defined for the article
8)     Perform the following validations on the quantity entered by the user
u2022     Check the format of the quantity input
9)     Move all the details along with quantity to a buffer table. Clear all the input fields for the next set of scan and move the current details to the last scanned variable for display
10)     In case duplicate scanning of article, cumulate quantities instead of adding new entry to the buffer table
11)     If the user click on option DISP, call the third screen
12)     In third screen, all the EAN/UPC numbers will be displayed with an option for scrolling and removal
13)     When the user choose option SAVE from the third screen, create physical Inventory document and update the count by following the below steps
u2022     Prepare the header parameters for the BAPI
u2022     Prepare the line Item parameters for the BAPI
u2022     Create PI document using the BAPI_MATPHYSINV_CREATE_MULT and BAPI_MATPHYSINV_COUNT
u2022     Trigger error message in case of any failure
14)     Clear and refresh all the variables and internal tables to proceed
15)     Create HTML templates for the screen in SE80 under the internet service ZNESTO
16)     Publish the IAC templates for the screens in SE80 under the internet service ZNESTO
Regards
Muneer V.K

How to enter more than 132 characters in a Parameters Field

Hi Everyone,
I have a field of type file_table-filename as Parameters in my Selection-screen. The size of the filename is 1024 characters as declared in the structure file_table. But when i am trying to enter the path into this field, its allowing not more than 132 characters....how is it possible to enter more characters? Even in debugging mode the maximum value we can scroll is upto 128/132 characters..if we want more then we should use the Offset option...but how to enter more than 132 chars into this field?
Best regards,
rama

Hai,
I did the same in my program...i get the filename along with the path into this field...but then there is a chance that the User wants to say edit the filename..here comes the problem.
Best regards,
rama

Entering more than one item using bapi_salesorder_createfromdat1

Hi,
I am connecting a CRM system with SAP, I have got the xml file for Sales Order with all the data's and i want to create a sales order in sap system using bapi_salesorder_createfromdat1.
My question is I am able to enter one item to the sap sales order. for inputing more than on items what should i do. Please help me.
thanks

Hi,
Then there must be some problem with the appending of the data in the ITEM table.
just see in the debugging.
Regards,
Atish

Restrict User not to enter more than 4 character number in UITextField.

Hi i want to restrict user not to enter number which is 4 character long and not to enter a number after 4 decimal points.
can ne1 help me on this??

funmania wrote:
To show alert view, one must use IBAction, but i am dealing with many text field and 1 button, how can i show alert views for all UITextFields?
create an IBAction called finishedEditingTextField:(id)sender. In that method, check the sender against the text fields. For example,
- (IBAction)finishedEditingTextField:(id)sender {
if (sender == textField1) {
if (textField1.text = @"String 1") {
UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"String 1" message:@"You typed String 1 into the first text field" delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil];
[alert show];
[alert release];
if (textField1.text = @"String 2") {
UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"String 2" message:@"You typed String 2 into the first text field" delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil];
[alert show];
[alert release];
if (sender == textField2) {
// Some more code
Hook up this method to each text field's didEndEditing (or something similar), or the button's Touch Up Inside event.
BTW, you don't need an IBAction to show an alert; you just need to alloc/init it, show it, then release it. You can do this "inline," in any part of your code.
Check out my blog—Cups of Cocoa

How to prevent invoice enters more than PO amount

hi,
how to prevent an Invoice verification being key in the system for more than the PO amount? meaning when invoice has been done for particular PO and there no outstanding amount for this PO. while users try to enter this PO # in the MIRO, system shouldn't allow it to be entered again. maybe promotes with error msg saying that this PO# has being fully performed! etc..
anyone knows how to do that? thanks

hi,
Actiavte duplicate invoice check..
Make settings at :
SPRO >> MM >> LIV >> Incoming invoice >> Check for duplicate invoice >> here make the indicators ticked as per your requirement and then,
Do also tick the duplicate invoice check indicator at VMR...
and then try...
System will not allow...
Regards
Priyanka.P

F-28 partial incoming payment entered more than the net due

Dear Experts,
My users are entering the partial payments in F-28 transactions more than the net due. How can we avoid these in future.
And secondly how can we do the transactions where in the amount received is more than the net due.
with regards
Ramesh Y

Hello Ramesh,
If you receive more amount than net due, then you can post these amount with special gl indicator in transaction F-29 as a advance. So that this amount is being displayed separately in FBL5N.
Rgds
Murali. N

After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Hi everybody,
we recently upgraded our Cloud Control from 12.1.0.3 to 12.1.0.4.
Now we have the following, a little bit strange behaviour.
Everytime we want to log into Cloud Control we have to enter our password more than once.
Sometimes even more than twice.
It alawys says user name and password are required
Does anybody has the same problem?
I didn't found anything on MOS. So any advice or answer is appreciated.
Greetings,
Daniel

Hi Daniel,
We have seen similar issue when we use non-certified browsers for accessing 12c console
Use certified versions of IE with EM 12.1.0.4 Cloud Control. for instance, Microsoft Internet Explorer 10.*, 9.*, 9 and 8 versions only.
This document can help you to understand the Certified Browsers:
<<Doc ID 1912367.1>> EM12c : Supported Browsers and Adobe Flash Players list
Regards,
Rahul

Calendar - how to enter more than one event per date and show it in the Month display?

I would like to enter multiple events (two, anyway) for a single day in the calendar. I would also like that Month view to display the two events. So far, all I've been able to do is enter a single event; in fact, only a single line for the single event. If I enter in Notes, they're not displayed in the Month view. Thank you.

I assume that you are tapping the + sign to enter additional events and that is not working so try quitting the app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

ENTER MORE C.I.D. IN CO11N

Similar Messages

Maybe you are looking for