Entering into site using valid id and password through URL class

hi......
i need to access the google adwords editor site. I have account on that but i want to access that by using URL class and then i need to use some data on getting response. It is very urgent for me. Whats the drawback is i am unable to handle the cookies send by the server. Can any one help how to get the response from that by handlin cookies or sessions through program. I have valid id and password.
Thanks in advance.
Regards...............
v.suresh

Thanks for the response.
I attempted to remove cookies, but I can not identify any of the cookies on the list with the PrimeVest web site. No PrimeVest, no PVs, nothing that looks like it came from them.
I have also reported the problem to PrimeVest and their tech did answer. He suggested erasing the browsing history (temporary internet files), which I did with no effect. He also had me check for the correct starting page address, which was OK. He stated that they are aware of a problem and it is on their list. No indication of how far down that list though. His only cure was to use IE for now, which I was already doing. Perhaps he can tell me which cookies to remove.

Similar Messages

HT204053 unable to log into iMatch using Apple Id and password. Msg says i have valid Id for store but not iMatch. What to do?

unable to log into iMatch using Apple Id and password. Msg says i have valid Id for store but not iMatch. What to do?
Is there a way to reset iMatch username and password?

An Apple ID which consists of a non-Apple address can perfectly well be used to create and sign into an iCloud account (most Apple ID's take this form). Your problem is that you can't create an iCloud account on Windows: you can only do it on a Mac or an iOS device. Once created on one of those you can sign into it on Windows using the iCloud Control Panel.

Using url with username and password in URL class

Hi,
I'm writting an applet in which I use getAppletContext().showDocument with an URL.
The problem is that I'm using URLs with username and password (http://user:[email protected]/page) and it isn't working because the browser is getting the URL http://user/page.
Is this a bug in the URL class? Or in the showDocument method?
Is there any way to make this work?
Thanks for any help,
Pedro Prospero Luis ([email protected])

I'm not sure whether this is supported behaviour. I've had this syntax fail to work in the Netscape address bar so I can't recommend it as an approach for authentication.
If you want to authenticate the user before redirecting to the page, though, you could try creating a connection to another page on the same server and sending the authorization information then. Your browser may then be successfully authenticated.
See http://www.javaworld.com/javatips/jw-javatip47.html for information on this.
You might not need to read back the page from the server, just connect to it. Might work.

How can I import a non-BC site into BC, using Dreamweaver CC, and then use it as one of my free sites?

I am trying to import one of my non-BC sites into BC, using Dreamweaver CC, and then use it as one of my free WebBasics sites.
When I try to create a new BC site in Dreamweaver CC, it creates a BC template site, and I have unsuccessfully tried to update the files on BC - it won't let me connect.
If I import the site from my portal, I don't get the option of a free site - when I try to upgrade, I get the credit card form asking for payment.
I feel like I'm running around in circles with one foot nailed to the floor.
Any tips?

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Why will i cloud refuse to log me in even with the right apple ID and password. I keep having to reset my password but i always get an answer that I have a valid ID and password but it is not an icloud account

getting the same answer everytime I try to log into i cloud. I get a message that I have a valid ID and password but it is not an icloud account. I have tried for almost a entire year to go there. i have re-downloaded the icloud contorl panel. before I got this notebook HP windows 8 it was easier . I do not like Internet explorer so I downlloaded.Google chrome. What must I do to go to icloud? I tried Internet Explorer and chrome. I buy music on itunes and I am not sure I get all the content I purchase. I have had to reset my password often and my email address to. I once spoke to a live tech a long while ago and he helped me combine all my purchased and downloaded music. Now its impossble to talk to anyone on the phone or even online and i am frustrated.

You must create the account using an Apple device, a Mac (Lion or greater) or an IOS device (IOS5 or greater). Having done that you will be able to sign in from your Windows machine.
FYI, iCal is an application that can display calendars from iCloud (and others) it is not a calendar itself, merely a calendar client. In Windows Outlook is the calendar client.

You must supply a valid username and password to log onto the system.

hi,
i installed hyperion performance suite8.3 on linux by root account,during installation, i select "native" authentication, after installation, when i login the web interface by root account, it tell me:
You must supply a valid username and password to log onto the system.
who can help me?
thanks

Do you have any projects listed in Shared Services ?
... you are also using
Did you put in the right url when you did the HFM config ?
check the httpd.conf file for server name and listening port number ....
what port are you using to login to workspace ?

Can I use user names and password of Microsoft Office Outlook for hyperion

I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?

That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake

Admin Console - Admin user requires valid username and password

I am running FMIS4.5 on CentOS5.5
FMIS is running and I can connect via Flash Media Encoder.
Web displays and admin console :1111 gives xml output, however
When using the user & password in my xml files to login (testing with ping), I get the "Admin user requires valid username and password" error.
conf/fms.ini:
# fms.ini contains substitution variables for Flash Media Server          #
# configuration files. Lines beginning with '#' are considered comments. #
# A substitution variable is in the form <name>=<value>. Everything up to #
# the first '=' is considered the name of the substitution variable, and #
# everything after the first '=' is considered the substitution value. If #
# you want a substitution variable to have leading or trailing spaces,    #
# enclose the value around double quotes. For example, foo=" bar "        #
# This section contains configurable parameters in Server.xml #
# Username for server admin
# For example:
#    SERVER.ADMIN_USERNAME = foo
SERVER.ADMIN_USERNAME = Admin
SERVER.ADMIN_PASSWORD = str34m1ng
# IP address and port Flash Media Admin Server should listen on
# For example:
#    SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.ADMINSERVER_HOSTPORT = :1111
# User id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_UID = 500
SERVER.PROCESS_UID = 500
# Group id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_GID = 500
SERVER.PROCESS_GID = 500
# License key for Flash Media Server
# For example:
#    SERVER.LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
SERVER.LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS#
# LIVE_DIR denotes the full path of sample "Live" application's
# folder for storing any live stream recorded by server.
# For example:
#    LIVE_DIR = <FMS_Installation_Dir>\applications\live
LIVE_DIR = /opt/adobe/fms/applications/live
# VOD_COMMON_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand and Progressive Download .flv/.mp3 files.
# File stored in this folder can be streamed and are also PD-able.
# Note : If you are using the default installation of Apache as a webserver,
# and if you modify VOD_COMMON_DIR, please change the document root
# accordingly in httpd.conf.
# For example:
#    VOD_COMMON_DIR = <FMS_Installation_Dir>\webroot\vod
VOD_COMMON_DIR = /opt/adobe/fms/webroot/vod
# VOD_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand only .flv/.mp3 files. Files stored in
# this folder are not PD-able
# For example:
#    VOD_DIR = <FMS_Installation_Dir>\applications\vod\media
VOD_DIR = /opt/adobe/fms/applications/vod/media
# The maximum size of the FLV cache, in megabytes.
# The default is 500MB.
SERVER.FLVCACHE_MAXSIZE=500
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = true
# This section contains configurable parameters in Adaptor.xml #
# Application directory for the virtual host
# For example:
#    VHOST.APPSDIR = C:\myapps
VHOST.APPSDIR = /opt/adobe/fms/applications
VHOST.ALLOW = all
# This section contains configurable parameters in Application.xml #
# List of semi-colon delimited paths in which to search for script to load
# For example:
#    APP.JS_SCRIPTLIBPATH = C:\scripts;C:\Program Files\Foo\scripts
APP.JS_SCRIPTLIBPATH = /opt/adobe/fms/scriptlib
# This section contains configurable parameters in Logger.xml #
LOGGER.LOGDIR =
# This section contains configurable parameters in Users.xml #
# Enable or disable using HTTP requests to execute admin commands.
# Set to "true" to enable, otherwise it will be disabled. The
# actual commands permitted for server admin and virtual host admin
# users can be set in Users.xml.
USERS.HTTPCOMMAND_ALLOW = true
Users.xml:
<Root>
    <UserList>
        
        <User name="${SERVER.ADMIN_USERNAME}">
            
            <Password encrypt="false">${SERVER.ADMIN_PASSWORD}</Password>
            
            
            
            
            
            <Allow>All</Allow>
            
            
            
            
            
            <Deny></Deny>
            
            
            
            
            <Order>Allow,Deny</Order>
        </User>
        <User name="janedoe">
                <Password encrypt="false">S4mpl3P4ss</Password>
                <Allow></Allow>
                <Deny></Deny>
                <Order>Allow,Deny</Order>
        </User>
    </UserList>
    <AdminServer>
        <HTTPCommands>
            
            
            
            
            
            
            
            <Allow>ping</Allow>
            
            
            
            <Deny>All</Deny>
            
            
            
            
            
            <Order>Deny,Allow</Order>
        </HTTPCommands>
    </AdminServer>
</Root>
Output on :1111/admin/ping?auser=Admin&apswd=str34m1ng :
<result>
<level>error</level>
     <code>NetConnection.Connect.Rejected</code>
     <description>Admin user requires valid username and password.</description>
     <timestamp>Thu 17 May 2012 11:33:43 AM EDT</timestamp>
</result>
Connections do not work from both localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.
Any assistance is appreciated!

Hi,
FMIS 4.5 does not accept plain text password. Encrypt=false is no longer supported. See here for more information : http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7fed.html#WS5b3ccc516d4fbf351e63e3d119f2926bcf-7e91
The value for SERVER.ADMIN_PASSWORD needs to be the encrypted string for your password. That should solve your problem.
Hope this helps.
Thanks,
Apurva

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.
I do not remember it because when I bought the my iPhone 4s in 2011 I didn't understand how it works and asked a representative to set it up for me. The representative helped me and gave a piece of paper with login and password but I lost it a long time ago.
Before resetting the settings I turned off "Find my iPhone" function, but it anyway asks me to enter my old Apple ID and password. I have the original box, documents, receipt. So how can I solve this problem?

You do not have to call US, but you need to call. Or else.
Contact Apple for support and service - Apple Support

Email send/receive suddenly doesn't work ; can't change email settings as BB phone won't accept valid username and password -- what to do?

email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.

But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work? I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe. This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot. But I know both were exactly the same. But after this incident only the Supervisor password worked.

How to upload a file into server using j2ee jsp and servlet with bean?

How to upload a file into server using j2ee jsp and servlet with bean? Please give me the reference or url about how to do that. If related to struts is more suitable.
Anyone help me please!

u don't need j2ee and struts to do file uploading. An example is as such
in JSP. u use the <input> file tag like
<input type="file"....>You need a bean to capture the file contents like
class FileUploadObj {
    private FormFile srcFile;
    private byte[] fileContent;
    // all the getter and setter methods
}Then in the servlet, you process the file for uploading
    * The following loads the uploaded binary data into a byte Array.
    FileUploadObj form = new FileUploadObj();
    byte[] byteArr = null;
    if (form.signFile != null) {
        int filesize = form.srcFile.getFileSize();
        byteArr = new byte[filesize];
        ByteArrayInputStream bytein = new ByteArrayInputStream (form.srcFile.getFileData());
        bytein.read(byteArr);
        bytein.close();
        form.setFileContent(byteArr);
    // Write file content using Writer class into the destination file in the server.
    ...

Why it is keep asking for Username and Password but i didn't use any username and password with my database.

Why it is keep asking for Username and Password but i didn't use any username and password with my database. Please help me i m very frustrated right now please help anybody. I m new in this.,

Hi,
Please check below threads:
Crystal Report Layout asking for Login Info
SAP B1 ask for credentials to print or to preview Crystal Reports report

HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818

Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4S

oenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

You must supply a valid username and password in Hyp 11.1.1.3.0

HI,
We have successfully installed New version of Hyperion 11.1.1.3. Configuration is successfull. When running validation one error occurs.
We are unable to log in workspace as we are required to 'supply a valid username and password'. We log in as admin/password but this is not working.
When I change it is shared services console it does not solve this issue.
Can you please advice of what shall be done to get over this?
thank you
lubos

This is not the Hyperion/Essbase forum.

Entering into site using valid id and password through URL class

Similar Messages

Maybe you are looking for