EntityBean: values are not loaded!

Hi,
i am working with jboss 2.0. i have an entity been having only get methods in its remote interface. the problem is that according to the specification, before a call to method in remote interface ejbLoad() must be called. but the strange thing is that ejbLoad() is called only one time( on first request) after deployment. on the other hand ejbStore() is called each time a get method is called.
is there anything that i am missing? does anybody have an idea?
regards
amt

Of course, ejbLoad() should be called once.
This call takes place when a entity bean is made active again, that's to say, when ejbActivate() method is called.
But every time you make change to the object, records in tables should be changed, too.
Good luck!
RickCui

Similar Messages

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

Master data(0vtype) values are not showing in reports.

Hi Gurus,
I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
for this object. but in reporting level i am getting the values # and 20(actual)
even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
Thanks in advance.
Thanks
Raju.k

Hi Raju,
You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
If yes and still in reporting you can not see those, try doing the following:
1) Right click on 0VTYPE and click on "Activate Master Data", and/or
2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
Regards
Pankaj

Keyfigure with units are not loading into transactional DSO in APD

Hi,
I am loading data from a Query to transactional DSO through APD. I have formula and new selection keyfigures in my query.
I mapped these keyfigures with units to the DSO. But i didnot see data for these keyfigures and also the units are not loaded.
I can see the values and units displayed in my query ?
What may be the reason for this issue even though every mapping is correct?
Please help me on this issue.

Hello Dear
When you are getting blank date , your update rule processes its value as 00000000,
Now in the date conversion routine if you go , you will find that after the routine one exception is written for this value..means this value is not accepted.
So maintain a date and load data.
Award points if it solves your problem/concern
Thanks
Tripple k

GR/IR A/c Amount and Amount in local Curreny values are not matching

Hello Gurus
When we are doing MIGO for some Scheduling Agreement PO's the Amount and Amount in local currency columns are mismatching with paise (+/-), eventhough PO belongs to Local Currency (INR). Because of this GR/IR account is not cleared after MIRO through F.13. Both MIGO and MIRO amount are showing as Open items.
Why it is happening and what is the way to clear GR/IR A/C. (F.13 with Tolerance limit is also not workout).
Thanks & Regards
Venkat.P

Hi sridhar
Thanks for reply
Through MR11 also these values are not cleared.
Regards
Venkat.P

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

Excise values are not flowing in MIGO

Dear All,
I am facing a problem during MIGO.
THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
1 I have created a PO.
2.Delivery through VL10D
3.Picking-vl02n
4.Created Bill-VF01
5.Created Invoice and saved it
When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
Regards
Manash

Hi,
Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
SETOFF Must Be Maintained:-
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
HX1     IN: A/P SECess SOTot
If it is there please follow the Following steps for STO
1.     Create Purchase Order(STO) using ME21N
2.     Create Outbound Delivery using VL10B
3.     Create Billing Document using VF01
4.     Create Excise Invoice using J1IIN
5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
Hope Help U !
Regards,
Pardeep Malik

Images are not loading - but work in Preview mode

Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.

Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-)

Screen values are not retained in Tcode BP, onclick of SAVE button

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.

OSS Note 1254214 is applied and it is solved.

CRM 7.0 WEB IC - context node values are not seen in webIC

Hi
can anyone help me in resolving my problem in CRM WEB IC.
Actually i have added a new context node Using wizard , by right clicking the context nodes. i have four custom fields in that node, these i have to show on the View Account overview and the context node for this is Account where i have to fetch data based on the BP_number i have in Account, i have to display custom fields from the context node BALANce which i have created .
I gave all my coding in do_prepare_output method. But the values are not passing to my custom fields as a result the view in WEB IC dissappears saying
&NBSP;
Cannot display view IUICOVW/AccInfo of UI Component IUICOVW
An exception has occurred Exception Class CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
Method: ZL_IUICOVW_ACCINFO_IMPL=>DO_PREPARE_OUTPUT
Source Text Row: 82
Edited by: nelachinni on Dec 16, 2010 10:04 PM

Hi,
Could you please share what are you trying to access at line 82 in do_prepare_output ? sharing code snippet might help in understanding the issue.
Cheers,
Sumit Mittal

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Forms values are not displayed correctly

This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
now text values show up in the text field.
Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
rather than IE.
Any thoughts on this would be much appreciated.

Hi,
Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
Thanks.
Tracy Cai
TechNet Community Support

EntityBean: values are not loaded!

Similar Messages

Maybe you are looking for