Entry in table TAX with authority CA --- is missing.

Hi
I change dthe residence state record effective june of last year and when the payroll runs , it throws the error
Entry in table TAX with authority CA XXXX is missing.
Has anybody come across this kind of error before.
Thanks
Revti

Can you tell me the error number of it. Also make sure that required config for the US tax for both the state authority are configured correctly.

Similar Messages

  • Log Entries in Table CDPOS with a Z File Append in VBAK

    Hi
      I'm trying to log changes of a new field appended in VBAK in table CDPOS, I already marked the data element of this new field with the checkbox for changes, but when i make some changes in VA02 on this new file, i can't see the changes in the  modifications log.
    Do i have to do any other thing in order to see the changes of this new field ??.
    Regards
    Soraya

    Hi,
    I think for logging the changes the table should have the <b>check box  Log data changes under technical settings</b> checked.This check box is not selected for VBAK. Selecting  the Change document checkbox at the data element level will mark that field in the table for logging.
    I Assume in order to log changes both the check boxes at table level and dataelement level need to be selected.
    Hope this helps.

  • Regarding workflow suspension(entry in table SWP_SUSPEN)

    Hi Experts,
    I have a workflow whose one of the workitem goes into enqueue error during it's processing when user tries to perform some parallel activity , now when user stops the parallel activity & come back to his inbox, it allows him to process the workitem properly. (That is workitem is successfully processed.....status is  completed). But after this workitem execution, the workflow hangs / gets suspended. Step histroy of this workitem shows there was an error when processing this workitem (Enqueue error) even though finally  user was able to continuue & process the workitem successfully & status is completed too. It creates an entry in table SWP_SUSPEN With workflow Workitem ID & workitem id of the workitem under this workflow & error type as "0001" i.e:- Enqueue error callback to workflow)  & status of the workflow as "1" ...i.e: - "In Process  " & not in error.
    I also analyzed that once the entry in the table SWP_SUSPEN is removed or gets deleted, the workflow continues from the point where it stucked.
    So what i wanted to know is, what this entry in SWP_SUSPEN means by indicating "Error type" as 0001 & Status as "1" . & how this entry gets deleted, i thought there is some background JOB RSSWERRE that does this but when i checked i found RSSWERRE only checks for items in SWP_SUSPEN with workflow statuses as "02" i.e:- In error. where as my workflow has status "1" in SWP_SUSPEN under status field (as mentioned above)which means "In Process"  I also found that this entry is getting deleted after sometime, so there must be some background job that is doing it, so i wanted to know what is that background Job if not RSSWERRE.
    Regards,
    Chetan.

    Hi,
    This is what i got from one of the Notes:
    ou use parallel processing where you have a fork with 2 branches (1
    Branch necessary for completion). In one branch is a dialog activity
    step and in the other is a 'Wait for Event' step. While the dialog
    step is being executed by a user the Wait for Event step receives its
    event and continues along the branch and completes the fork (Remember
    only 1 branch needed for completion). Once the end of fork is reached
    the dialog work item should be set to status Logically Deleted but
    this does not occur due to the lock/enqueue on the work item while the
    user is executing it. Since a callback is essential for a workflow to
    continue running, this callback is suspended (stored in the SWP_SUSPEN
    table). These callbacks are started again via the RSWWERRE report. If
    you have not scheduled report RSWWERRE then the work items will remain
    in table SWP_SUSPEN and the work items will not receive their callback
    and will therefor will not continue.
    If there are examples of work items hanging then check table SWP_SUSPEN to
    see if the callback work item ID is there. If it is then make sure you have
    the RSWWERRE job running in order to redeliver it. If RSWWERRE is running
    and the entry is not being delivered then please check for notes using the
    search term "RSWWERRE" and "SWP_SUSPEN". If there is no entry in
    SWP_SUSPEN, then check the workflow definition to see if the work item is
    asynchronous i.e. needs a terminating event as in Example 1 above. Check
    the event queue via transaction SWEQADM to see if the terminating event is
    being buffered there. If it is then it should automatically be redelivered
    so do a notes search in relation to the event queue.
    Regards
    Gautam
    Edited by: gautam maini on Aug 3, 2011 4:16 PM

  • Entries in Table VKDFS

    Hi Gurus,
    Can you please explain me how entries are created in table VKDFS ( Billing initiator table ). the problem we are facing is in transaction VF04 ( billing due list ) , for order related billing documents billing type is not coming for some cases.
    thanks in advance.
    Regards,

    HI,
    this particular problem is coming for  a custom item category ZR2U. when i checked the transaction VOV7 for this item category i found the following details. now for some entries in table VKDFS with item category ZR2U  are showing billing type in transaction VF04 however some are not. please help me.
    Item category        ZR2U   HWS RET R&R NO DLV
    Item Type
    Completion Rule
    Special Stock
    Billing Relevance    C
    Billing plan type
    Billing Block
    Pricing              X
    Statistical value
    Revenue Recognition
    Delimit. Start Date
    Incompletion Proced. ZM     NET ITM w/o PR          Screen Seq.Grp  N
    PartnerDetermProced. N      Standard Item
    TextDetermProcedure  Z1     Nokia Sales Item        Status Profile
    Item Cat.Stats.Group 2      Returns, credit memo

  • This entry already exists in following tables "tax formula master table'

    I am getting this error while adding a new tax Formula.
    Please suggest the possible solution.
    SAP B1 2007 B PL-10
    This entry already exists in following tables "tax formula master table' (OFML) (ODBC-2035) [Message134-183]
    Regards,
    Ranjith

    Hi
    First of all have u tried what i told ??
    For which tax going u r going to create???
    Check in another DB, whether same error is coming r not
    Giri
    Edited by: Giri dharan on Dec 30, 2009 5:47 PM

  • Lock table overflow - BRF Plus - can it work with many entries in tables ?

    hi,
    when I'm trying to open expression table in BRFplus with 500 entries in web
    I get an error: Lock table overflow and I see more then 2000 entries in sm12 for fdt_ tables
    and the system cannot create any more locks (so other applications are not working)
    why is that ? can BRF plus work with more then 100 entries in table expressions at all ?
    can anyone tell from experience as this is a huge issue I believe
    thank you,
    Regards,
    Michal Krawczyk

    Hi Michal,
    You are running a NW 701 system. This was the first version of BRFplus and the DB schema was not good for high volumne.
    I have created some notes recommending to use decision table for up to 100 rows (of course other factors like # of columns are also important).
    In NW 702 the DB schema has been changed and decision tables with 10.000 rows are possible and performance better by a factor of 100 and more.
    In your specific case you may consider to increase the number of logs that are possible. But this is rather a workaround than a solution.
    BR,
    Carsten

  • Problem with No entry in table T591B for 0015 08 E101

    Hi all,
    This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
    When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
    Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
    Thanks in advance for any advice anyone can give me
    Nyree

    Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
    All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101'  for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
    Rgds.

  • Entry in table TAORA missing! Please help with this error!

    I am moving a Z table from QAS to PRD and in PRD the table gets moved in inactive state. When I try to activate it I get an error "Entry in table TAORA missing". Could someone please give me any information how to fix this?
    Thanks.
    Mithun

    Hi Mithun Dada,
    when u created this Z table may u have not maintained the
    Data class and some setting correctly.Check for it and move it.
    <REMOVED BY MODERATOR>
    Thanks and regards,
    Rajeshwar.
    Edited by: Alvaro Tejada Galindo on Apr 23, 2008 5:14 PM

  • Help req for check customer table maintenance with XD02 if not throw error

    hello ABAP GURUS,
    check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
    TYPES: BEGIN OF TY_KNVI,
    KUNNR TYPE KUNNR,
    TATYP TYPE TATYP,
    TAXKD TYPE TAKLD,
    END OF TY_KNVI.
    DATA : VALIDFROM TYPE GUEBG,
    VALIDTO TYPE GUEEN.
    DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
    WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
    DATA : V_NAME TYPE SYUNAME.
    SELECT KUNNR
    TATYP
    TAXKD
    FROM KNVI
    INTO TABLE WA_KNVI
    WHERE KUNNR = YYV_CFORM-KUNNR
    AND TATYP = 'ZCST'
    AND TAXKD = '1'.
    V_NAME = SY-UNAME.
    YYV_CFORM-ENTEREDBY = V_NAME.
    IF SY-SUBRC NE 0.
    MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
    ENDIF.
    I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
    thankx in advance.
    Edited by: soni khadary on Apr 22, 2008 7:55 AM

    Hi Kelly,
    I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
    ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
    "I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
    ls_edit-fieldname =  'First field name' .
    PERFORM update ls_edit.
    ls_edit-fieldname =  'Second field name'.
    PERFORM update ls_edit.
    ls_edit-fieldname = 'Third field name'.
    PERFORM update ls_edit
    FORM update USING fs_edit type lvc_s_styl.
    field-symbols: <style_tab> type lvc_t_styl,
                         <style_wa> type lvc_s_styl.
    LOOP AT <tab> ASSIGNING <wa_tab>.
       if e_row = sy-tabix .
         "get you style table
         assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
         "as <style_tab> is typed fully you can read the row you are interested in
         read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
         if sy-subrc = 0.
           "update this entry
            <style_wa> = fs_edit.
    *        modify table <style_tab> from <style_wa>. 
         endif.
       endif.
    endloop.
    endform.
    Note!
    Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
    Regards
    Marcin
    I noticed now that this line is not necessary
    modify table <style_tab> from <style_wa>. 
    as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
    Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

  • How can i  add entry in table BSP_DL_XMLSTRX2 for creating a copy of a view

    hi
    i want to copy in a CRM_UI component view the configuration of the view and want to save the copy with a
    different object type. But F4 value help only provides ( in crm_ui component workbench) me the value <DEFAULT> as for that view there is only one entry in table
    BSP_DL_XMLSTRX2 and for object type = <DEFAULT> and when i enter something different i get the error that this object type does not exist.
    (call method CL_BSP_DLC_XML_STORAGE2=>GET_EXISTENCE_FOR_VIEW
        exporting
          IV_COMPONENT       = ME->CURRENT_CONFIG_KEY-COMPONENT
          IV_VIEWNAME        = ME->CURRENT_CONFIG_KEY-VIEWNAME
        importing
          ET_CONTEXT_SEM_KEY = LT_CONTEXT
          ET_CONFIG_INFO     = LT_CONF_INFO.
    ---> result in only one line but i want to add another
    *so my questioin:
    where can i enter a new object type for a existing crm_ui view configuration

    Hello Britta,
    Its useful program to copy a view configuration.
    Best Regards,
    zafer,
    Edited by: Zafer Kuru on Dec 5, 2011 3:51 PM
    REPORT  z_copy.
    TABLES bsp_dcls_conf_semantic_key.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS     fr_comp  TYPE bsp_wd_component_name OBLIGATORY.
    PARAMETERS     fr_view  TYPE o2pageext OBLIGATORY.
    PARAMETERS     fr_role  TYPE bsp_dlc_role_key OBLIGATORY.
    PARAMETERS     fr_couse TYPE bsp_dlc_component_usage OBLIGATORY.
    PARAMETERS     fr_obty  TYPE bsp_dlc_object_type OBLIGATORY.
    PARAMETERS     fr_obsty TYPE bsp_dlc_object_sub_type OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS     to_comp  TYPE bsp_wd_component_name OBLIGATORY.
    PARAMETERS     to_view  TYPE o2pageext OBLIGATORY.
    PARAMETERS     to_role  TYPE bsp_dlc_role_key OBLIGATORY.
    PARAMETERS     to_couse TYPE bsp_dlc_component_usage OBLIGATORY.
    PARAMETERS     to_obty  TYPE bsp_dlc_object_type OBLIGATORY.
    PARAMETERS     to_obsty TYPE bsp_dlc_object_sub_type OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS     request   TYPE trkorr OBLIGATORY.
    PARAMETERS     d_mode    TYPE flag.
    SELECTION-SCREEN END OF BLOCK b3.
    DATA :  iv_from_component         TYPE  bsp_wd_component_name,
            iv_from_viewname          TYPE  o2pageext,
            iv_from_role_key          TYPE  bsp_dlc_role_key,
            iv_from_component_usage   TYPE  bsp_dlc_component_usage,
            iv_from_object_type       TYPE  bsp_dlc_object_type,
            iv_from_object_sub_type   TYPE  bsp_dlc_object_sub_type,
            iv_to_component           TYPE  bsp_wd_component_name,
            iv_to_viewname            TYPE  o2pageext,
            iv_to_role_key            TYPE  bsp_dlc_role_key,
            iv_to_component_usage     TYPE  bsp_dlc_component_usage,
            iv_to_object_type         TYPE  bsp_dlc_object_type,
            iv_to_object_sub_type     TYPE  bsp_dlc_object_sub_type,
            is_transport_data         TYPE  bsp_dlc_config_transport_data.
    DATA:
      ls_from_config_data   TYPE bsp_dlcs_conf_data,
      lr_from_text_rep      TYPE REF TO cl_bsp_dlc_stext_repository2,
      lr_to_text_rep        TYPE REF TO cl_bsp_dlc_stext_repository2,
      lt_from_text          TYPE bsp_dlt_stxtrep2,
      ls_from_text          TYPE bsp_dl_stxtrep2,
      lv_to_context_id      TYPE bsp_dlc_context_id,
      lv_config_data_origin TYPE bsp_dlc_config_data_origin.
    DATA lt_xmlconf TYPE TABLE OF bspc_dl_xmlstrx2.
    DATA ls_xmlconf TYPE bspc_dl_xmlstrx2.
    DATA ls_xmlconf_check TYPE bspc_dl_xmlstrx2.
    is_transport_data-request = request.
    is_transport_data-display_mode = d_mode.
    SELECT SINGLE * FROM bspc_dl_xmlstrx2 INTO ls_xmlconf_check
                                          WHERE component = fr_comp
                                            AND viewname = fr_view
                                            AND role_key = fr_role
                                            AND component_usage = fr_couse
                                            AND object_type = fr_obty
                                            AND object_sub_type = fr_obsty.
    CHECK sy-subrc EQ 0.
    TRY.
        CALL METHOD cl_bsp_dlc_xml_storage2=>get_config_data
          EXPORTING
            iv_component           = fr_comp
            iv_viewname            = fr_view
            iv_role_key            = fr_role
            iv_component_usage     = fr_couse
            iv_object_type         = fr_obty
            iv_object_sub_type     = fr_obsty
            iv_only_spec_parameter = abap_true
          IMPORTING
            es_config_data         = ls_from_config_data
            ev_config_data_origin  = lv_config_data_origin.
      CATCH cx_bsp_dlc_config_not_found.
        RAISE config_not_found.
    ENDTRY.
    lr_from_text_rep = cl_bsp_dlc_stext_repository2=>get_instance(
                                             iv_component = fr_comp
                                             iv_viewname  = fr_view
                                             iv_role_key        = fr_role
                                             iv_component_usage = fr_couse
                                             iv_object_type     = fr_obty
                                             iv_object_sub_type = fr_obsty
    CASE lv_config_data_origin.
      WHEN cl_bsp_dlc_xml_storage2=>config_data_origin_c.
        CALL METHOD lr_from_text_rep->get_texts_c_for_context_id
          EXPORTING
            iv_all_langu = 'X'
          IMPORTING
            et_text      = lt_from_text.
      WHEN cl_bsp_dlc_xml_storage2=>config_data_origin_s.
        CALL METHOD lr_from_text_rep->get_texts_s_for_context_id
          EXPORTING
            iv_all_langu = 'X'
          IMPORTING
            et_text      = lt_from_text.
    ENDCASE.
    Edited by: Zafer Kuru on Dec 5, 2011 3:54 PM

  • I have to make Multiple entry at table maintanance at a time

    Hello all,
    My requirment is to enable the multple user can loginto the same table for making there entry simultaneosuly .
    i have created the table and table maintance as well. and i have created the new lock object and added the code accrdingly and i have used the custom fm which is generated in the tablemainta  function group.
    forex: table xyz
    user 1 , 2, 3, 4, 5,so on..
    table should allow all user tomake there entry at time and the entry edited one user should be disabled to other user.
    I have gone the forum i didnt found the correct one ..plz guide me ..plz find the attached code .i got this code and referredthe samein my prog ..any suggestions on the below.
    1.       Create table ZTEST_SHUKS3.
    2.       Create table maintenance generator for the table. 
    3       Create lock object EYTSS_E433SH in SE11. Give it name as EZTEST_SHUKS3. 
    4       create a report  ZREP_SHUKS3 and transaction code ZTEST_SHUKS3  to call this report. This tcode will call table  mainatance     generator of table ZTEST_SHUKS3 . 
    5  create the report as below
    6 Now open table maintenance function  group(ZTEST_SHUKS3)  in SE80.We know for table maintenance SAP automatically creates code in the function group. Now we will make some modification in that existing code to change the behavior. Open the screen you created through table maintenance and add one module. 
    screen: 0001
    double clik on screen and add one module in PBO of the screen
    loop at extract with control
    tctrl_ZTEST_SHUKS3 CURSOR NEXTLINE.
    MODULE LIST SHOW LISTE
    ADD HERE
    MODULE m_change_locking
    Check the code below to be added in the module m_change_locking. 
    MODULE m_change_locking OUTPUT.
    *Call the function module corresponding to the lock object we created
      CALL FUNCTION 'ENQUEUE_EZTEST_SHUKS3'
        EXPORTING
          matnr          = ztest_shuks3-matnr
          werks          = ztest_shuks3-werks
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc NE 0.
    row is locked..hence gray..
        LOOP AT SCREEN.
          screen-input = 0.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF.
    ENDMODULE.                 " m_change_locking  OUTPUT 
    REPORT  zrep_shuks3.
    **Selection range for view maintenance
    DATA:
      BEGIN OF selekttab OCCURS 1.         "Selektionsbereich
            INCLUDE STRUCTURE vimsellist.
    DATA: END OF selekttab,
    **Table of inactive CUA functions for view maintenance
    BEGIN OF excl_cua_funct OCCURS 1.    "inaktive CUA-Fkt bei View-Pflege
            INCLUDE STRUCTURE vimexclfun.
    DATA: END OF excl_cua_funct.
    DATA: lt_enq_del TYPE STANDARD TABLE OF seqg3,
          lt_enq_read TYPE STANDARD TABLE OF seqg7,
          lw_enq_read TYPE seqg7,
          lw_enq_del TYPE seqg3,
          lv_subrc TYPE sy-subrc.
    *Read all the lock details in system
    CALL FUNCTION 'ENQUE_READ2'
      EXPORTING
        gclient = sy-mandt
        gname   = ' '
        guname  = '*'
      TABLES
        enq     = lt_enq_read.
    *We will search entry for table level lock for our table
    LOOP AT lt_enq_read INTO lw_enq_read
    WHERE gname EQ 'RSTABLE'
    AND   garg CS 'ZTEST_SHUKS3'.
      MOVE-CORRESPONDING lw_enq_read TO lw_enq_del.
      APPEND lw_enq_del TO lt_enq_del.
    ENDLOOP.
    *Delete table level lock entry for our table
    CALL FUNCTION 'ENQUE_DELETE'
      EXPORTING
        check_upd_requests = 1
      IMPORTING
        subrc              = lv_subrc
      TABLES
        enq                = lt_enq_del.
    *Now call the table maintenace generator.
    CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
      EXPORTING
        action               = 'U'
        view_name            = 'ZTEST_SHUKS3'
        show_selection_popup = 'X'
      TABLES
        dba_sellist          = selekttab
        excl_cua_funct       = excl_cua_funct.
    I followed the same steps but still not getting the multiple user enable .
    plz help
    regards
    Raju
    Edited by: abaprthree on Jul 22, 2009 7:54 PM

    Hi,
    I think you are looking for the report which will allow only for entries not for change. In this case, at PBO you write the code to make all the rows in display mode which have records using LOOP at SCREEN .....ENDLOOP. When you click on on NEW ENTRY button, add blank rows and put user entries. When you save,check for existing entries in the table because many users are entering the data at the same time, so check for duplicates KEY entries and UPDATE the table on SAVE button. If you will go in this way, I don't think you have to go for LOCK object. It's required only if you are going for EDIT mode.

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

  • Logical system entry for table entry

    Hi,
      After system copy from one system name to another , I am facing some inconsistenices in various tables.
    The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
    I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
    Thanks,
    Chitta

    Hello Chitta,
    But when I try to select entries from the same table using SELECT statement, table are not getting populated.
    what are you trying to populate?
    If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
    If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
    select * from <SchemaID>.<tablename>
    SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
    Regards,
    Debasis.

  • Unable to create new entry in table that has no primary key

    Hi
       I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
    If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
    Thanks
    NM

    Hi,
    THE PROBLEM WITH UR TABLE IS
    YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
    iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO  IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
    SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY  ALSO MAKE SURE THAT TABLE IS ACTIVATED.
    REVERT IF U NEED SOME MORE HELP
    Thanks &Regards.
    Pavan.

  • Error in import of tables splitted with SQL splitter of note 1043380

    I'm doing an import on AIX for a Sap system, while the source system was on Windows and during the export I splitted some table using the splitter of note 1043380.
    THe export went fine, and I see from the .TOC files into the export directory a huge number of rows has been exported for these splitted tables.
    Neverthless during the import I discovered the Sapinst mark these tables as completed but the edata is not imoported.
    Into the .log file for one of them I see this :
    RFF) ERROR: no entry for table "VBFA" in "/export/ABAP/DATA/VBFA-1.TOC"
    (IMP) INFO: import of VBFA completed (0 rows)
    On SDN I found the post:
    Problem with import of split tables.
    But it's not clear how to apply it. I try to modify the ..TSK files for the VBFA pieces but I'm not able to find out the two space  characters responsible for this behaviour.
    Below some row of one of the .TSK for the VBFA table:
    VBFA-1__TPI.TSK
    D VBFA I ok
    WHERE (ROWID >= CHARTOROWID('AAAaZsAAEAAAqYJAAA') and ROWID <= CHARTOROWID('AAAaZsAAEAAArYIEI/'))
    /*+ ROWID ("VBFA") */
    D VBFA I ok
    WHERE (ROWID >= CHARTOROWID('AAAaZsAAEAACGUJAAA') and ROWID <= CHARTOROWID('AAAaZsAAEAACIUIEI/'))
    /*+ ROWID ("VBFA") */
    Beside the post stated this is a well know bug of the splitter of note 1043380 but I'm not able to find any Oss note for that.
    I used the splitter already several times and never encountered this error.
    Any help is really appreciated.
    Best regards

    Sorry I have posted the wrong link, it should be:
    Re: Import error 1647, CLOB fields problem, need help!
    Regards
    Rob

Maybe you are looking for