Entry point error on windows vista

I'm getting an "iTunes.exe Entry Point Not Found" message. Im running on Windows Vista and i don't understand how to fix my problem. I reinstalled iTunes and still no fix. Please help. Thank you!

welll about that link u gave
i reinstall 11g again today and i open up the em
but the mertric its telling me to edit is not visible
so i searched for this http://download.oracle.com/docs/html/B15719_02/toc.htm#CIAIDJJI
Network Utilization Metrics Not Displayed
The Oracle Enterprise Manager Grid Control or Database Control should display the following network utilization metrics for each network interface:
Network Interface Combined Utilization (%)
Network Interface Read Utilization (%)
Network Interface Write Utilization (%)
If these metrics are not displayed for a particular network interface, create the $ORACLE_HOME/sysman/config/network_speed file and enter the network interface name and speed in the file as follows. In this example, interface is the network interface name and speed is the speed of the interface in megabits per second (Mbps):
interface_name speed
For example, if the eth0 network interface does not display metrics, create the $ORACLE_HOME/sysman/config/network_speed file and enter the following, where 100 is the network speed in Mbps:
eth0 100
but i am not getting what i have to do
can u help with this
Edited by: Juhi on 26-Apr-2010 23:37
Edited by: Juhi on 26-Apr-2010 23:40

Similar Messages

Illustrator Entry Point Error

Illustrator CS 6. All other application work as always did. Illustrator, however, displays an entry point error that wasn't solved after de-installing and re-installing the whole suite and cleaning the registry using adobe's application for that purpose. What happened is that my disk crashed and all applications had to be re-installed. Illustrator, however, displays this message and quits.
This is my system: Dell 8700, Windows 8.1, plenty of memory.
IF any one knows, please, help.

Metaphysically speaking, you are right. Technically, a browser and Illustrator CS6, are two complex beasts that don't breed together and don't even try to cross pollinate each other if only to multiply their complexity factor, which I can only imagine, since they work independently.
As far as my system, this is a plain one, although I don't take it as totally innocent.
Thanks, anyway, for elevating a simple bug to a dignified philosophical consideration.

Entry point error while installing SAP GUI 7.20 compilation 3

Hi Experts,
I couldn't install SAP GUI 7.20 compilation 3 in my PC, I used SAP GUI in my PC a year ago but later I formatted my disk. Now when I click on SAPGUISETP it is throwing the following error
The Procedure entry point ?FeiDbgException@@YAXVCWin32Exception@@@Z could not be located in teh
dynamic link library NwSapFeiLg.dll
Can anyone please advise?
NB P.s: Initially it mentioned the dll files NWSAPFEIUT.dll & NwSapFeiLg.dll were missing just now I copied them to System & System32 folders. But even though it is showing this entry point error. Also i have done a clean boot and tried installing it but in vain.

Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen.

I downloaded iTunes onto my laptop and kept getting an Apple Application error so I also downloaded that and now I'm getting a Procedure Entry Point error as well as Error 7 (Windows Error 127) and I have no clue what to do. Can anyone help me?

I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?

iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Some calendar entries do not sync: Windows Vista -- Outlook 2007 -- 3GS

I have a couple of calender entries that refuse to sync. beween my Windows Vista machine running Outlook 2007 and my iPhone 3GS.
I bought some airline tickets from USAir and they sent reservation information in an e-mail that I added to outlook. Although the "appointment" looks normal in Outlook it will not sync. I also have one event on the iPhone that won't sync "back" to Outlook.
So far I have tried:
* Reseting the sync. history in iTunes
* Setting the "Replace information on this iPhone" for the Calendar setion.
* Making an edit in the non-syncing entries so they would show as needing to be synced to the other device.
None of these things has made the entries sync....
Any ideas apprecaited....

Ok after MUCH messing around it appeared that the problem was somewhere in one of my "repeating events". Myself and the Apple guy concluded this after exporting all of my calendar events to a CSV file and then re-importing them. All the events went to the iPhone without issue so the initial diagnosis was data corruption in one of these events causing a sync. failure.
I was willing to go along with this diagnosis and figure out which event was corrupt since that seemed to be the problem.
MY ONLY COMPLAINT to Apple at the time was that this condition should have given an error message during sync. - just a "basic" QA check of the sync. would show the number of calender events in Outlook did not match the number of calender events in the iPhone ... apparently this is NOT performed by the iTunes Sync. tool.
Anyway I deleted ALL recurring events from my calender sync-ed and all was well.
I started adding back the repeating events to find the "broken" event. This turned out not to be possible as it would "break" in seemingly random places.
For example I have about 60 annually repeating events (birthdays and anniv.) I added back the first 20 ... it broke. Ah-ha the problem is somewhere in #1 - 20 of 60. So I add just the "last" 40 ... it still breaks... hmmmmmm do I have MULTIPLE "break points"???
Ok ... so I just start re-adding them manually one at a time ....
I have a grandfather that was born in 8/28/1915. When I add his birthday to the calendar in Outlook (by entering his birthdate on the details page of his contact record in Outlook) a annually repeating event that repeats forevery starting on 8/28/1915 gets added to the calender. iTunes would NOT sync. this event.
I deleted it, re-resync-ed, then re-added the birthday and EDITED it to start the repeating event on 8/28/2000. This time a sync. worked OK and the birthday is on my iPhone ... this is very screwy. Again no error messages from iTunes at any time.
So I do not know what the "metrics" are for valid events, but if something as simple as the one above confuses iTunes I sure could have a lot of "bad" events that are in fact not corrupt.
So I do not know what the "metrics" are for valid events, but if something as simple as the one above confuses iTunes I sure could have a lot of "bad" events that are in fact not corrupt. There has got to be something weird going on with the way iTunes handles "repeating" events in terms of a "ceiling" as to how many times it can repeat or the total number of repeating events that can be sync-ed or something like that ... that seems to be the only "thread" I can find .... it does not appear to be corrupt data, but perhaps event types that the iTunes/iPhone can not handle???
Not a happy boy.

CS4 Entry Point Error

Hi.
I'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update. I'm currently running 11.0.1). Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag. Still, it's become quite annoying to start the program like this everytime and I'm pretty sure getting an error during start up is a good indication that not everything is 100%. Does anyone have any suggestions about what I should do? I attached a picture of what I get in case I wasn't able to describe my problem clearly.
--jenn

On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll” - http://support.microsoft.com/kb/969155 This issue occurs when the dwmapi.dll has been installed in the Windows\System32 folder. Note: dwmapi.dll is a Windows Vista file that may have been installed by another application. Just rename it to dwmapi.dll.bak and the error goes away. I hope this helps. It worked for me.

Error 2330, Windows Vista - Can't uninstall or Reinstall ITunes

Itunes was working fine for quite awhile, but now when I access the store to download another song the store shows up but almost immediately blanks out to a white screen with only header info on it, no details.
When Itunes starts up, I get a message saying that there is a problem with the installation and CD downloads will not work.
I have tried reinstalling Itunes and Quicktime from the apple website. Also, uninstalling both from the Windows control settings. QT gets uninstalled and reinstalled fine. I get error 2330 with no other information when trying to reinstall or uninstall Itunes.
Have tried clearing out the TEMP folder and also doing selective startup as directed on the apple help tips. Still no luck.
Does anyone have suggestions how to resolve the 2330 error and why I am getting it?
THANK YOU !!

I had this same issue with the iTunes store loading then going to a blank white screen straight after. I then checked for updates, installed everything it told me to (Safari, Quicktime, iTunes). However after everything installed it cut my internet connection. I was able to browse the internet for about a minute before I completely lost my internet connection.
I called my router manufacturer, they could not resolve my issue as the other PC's could access the internet so I knew it was iTunes/Safari/Quicktime. I did a system restore (I am using Windows Vista), that did not work. I searched on the other PC for help and found somewhere to uninstall network adaptors under the device manager. That just took away all my applications that pointed towards the internet so I did another system restore to bring them back, but this however fixed my issue. I did have to re-access my router from my computer by prompting it to reconnect to my ISP and then I got my internet back.
But, I can't access my iTunes or listen to my music.

Entry Point Error when starting WL

Hello,
I am runnning WL 5.1 on Windowa NT. When I start WL as a NT service a got this error:
WLService - Entry Point Not Found
The procedure entry point ResolveClass could not be located in the dynamic link library javai.dll
Despite this error, I got to start WL. But I would to know if this behavior affect my WL, if so how ?
Thanks in advance.
Francisco Manzo

Tshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo

How do you fix entry point error sqlite3_wal_checkpoint

HI All,
I just downloaded the "lastest" PUSH (iOS (iPAD/iPhone), Quicktime, iTunes upgrades for Windows 7 (x64) from Apple, and upon reboot (required) I was greeted with the following error msg.:
"The procedure entry point SQLite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
How do you FIX this????
Thanks in advance for your help in resolving this matter.
Regards   Jeff

HI B Noir,
No that did not help.   I did copy the SQLite3.dll to the: Program Files(x86)/common files/Apple/Mobile Device Support folder and that got rid of that error.   It appears that this is an ongoing issue with iTunes on Windows machines. I'm starting to remember that I had to do this for the last update, fouond the fix in another forum dated in 2010.
2 other issues also occur:
1. Can't backup to the computer, only to the icloud. When I change it in itunes it reverts back to the icloud, and will not backup to the computer.
2. The "category list" in the radio on itunes refreshes forever, and no station appear under any category.
Thanks for trying.
Regards   Jeff

Flash Professional CS5 Entry Point Error

Hi, I installed CS5 Web Premium Student & Teacher Edition on my home computer running vista home premium x64bit with well over the minimum system requirements, all the programs run correctly except Flash Professional CS5.
This error appears and the programme does not start up.
“ The procedure entry point ?ik_treeIsActive@CFlashIK@@QAE_NJ@Z could not be located in the dynamic link library FlashIK.dll.”
I have tried uninstall and re-install as well as the Adobe Creative Suite Cleaner Tool . I have installed the same package on my laptop and it works fine but need Flash on my home computer, how can I fix this??

Ask on the Flash forum. This is a program specific error.
Mylenium

Error with windows vista but not xp

Hi there all,
IT have recently changed my computer to Windows Vista from XP.
i have lots of reports that were created pre transfer and they now dont work in vista.
it seems to be a common problem when a report containts "Date Job completed" it returns an error of "ERROR DURING SQL EXECUTION DA0003" so i assumed it must be a time out error and ameded the times in regedit.
however it still doesnt work. i cant see it being a date format as a simple report that contains "date job raised" works. its just these other date ones!
can anyone shed any light on the problem im experiencing? IT have now given me my old computer back to fix the problem but im gonna need to go back to the new one again soon!!
also, i assume it must be a setting somewhere that needs changing!?!?
thank you
sam
p.s. i use desktop intelligence XIR2.

Hi Samantha,
Are you getting the error message while accessing deski through infoview or just local deski.
If it is deski through infoview, Can you please let me know which version of Internet Explorer you are using.
You can try the below steps to increase the timeout of IE in your machine and then test the report.
Now, here are the steps to increase the IE7 timeout-
Backup of your registry settings, before making any changes.
Add a ReceiveTimeout DWORD value with a data value of (<number of seconds>)*1000 in the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
For example, if you want the timeout duration to be 8 minutes, set the ReceiveTimeout data value to 480000 (<480>*1000).
Restart your computer.
Repeat all of the above steps on every computer that uses IE 7.
This particular error message appears because of the Timeout setting in Microsoft Internet Explorer 7. By default, IE 7 has the timeout of 30 seconds.
Also, here is the link from Microsoft which identifies the issue-
http://support.microsoft.com/kb/181050/en-us
Lets hope this resolves your issue.
Regards,
Gaurav

IPod Shuffle Error (-48) : Windows Vista

Hoping someone can help with my predicament here:
I have Windows Vista Ultimate and the most recent version of iTunes. I bought the shuffle new about 2-3 months ago. When I connect my shuffle it always gives me the error in the screenshot below and prompts me to format the device as well. It will also do this each time a song changes if I am listening to the songs on the iPod through iTunes. When transferring songs to the iPod it prompts me with these pop-ups for each song that is loaded.
I have tried to search for that error code and have not had any luck. Has anyone run into this issue before.
All software is up-to-date: Windows/iTunes/Shuffle Firmware
Thanks for any feedback!
Here is a screenshot of the errors:
http://www.drunet.org/images/iPod-Shuffle-Error48.png

Hi, I would suggest you to try Temporarily changing the Time Zone setting and then Open the latest version of iTunes and Restore your iPod. After successfully restoring your iPod, change the Time Zone back to your normal setting.
Hope this works.

NIPALU.dll entry point error message when launching application

A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
"The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
Attachments:
Error Message Screen Shot.png ‏8 KB

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Drivers error recovering Windows Vista on Satellite A200

Hello,
I replaced the HD of my Toshiba Satellite A200. I replicate the original disk partitioning in the new disk and installed the original SO (Windows Vista) from the recovery disk.
Everything went well. However, when I started Windows for first time, it was unable to end the autoconfiguration phase. An error message appeared on the screen: it had been unable to find all the drivers that it needs.
After accepting the error message, windows rebooted the system without giving me any chance.
Can anyone tell me what went wrong with the Windows recovery process?
How can I add the drivers needed or skip the autoconfiguration process to do it later?

> {quote:title=JoeLouis wrote:}{quote}
> >Does anyone know if there is any chance to interrupt Toshiba recovery process or windows autoconfiguration process to load a specific driver?
>
> No, if you want to add the driver while windows installation and setup process, you have to use an Microsoft Windows disk Toshiba recovery disk contains an image which is NOT the same like a common installation disk!
That's completely right. However, after copying the image to the HDD, the system reboots and loads Vista for first time. Then, the system starts a non-interactive autoconfiguration process (it shows a label similar to "Please, wait...").
Eventually, it shows an error message and shuts down.
This leads me to think that the image copy process went well (the system loads without trouble) but then Windows loads a wrong driver to manage the HDD and crashes.
I would like to know if I can change any option in a configuration file (after copying the image in the HDD and before loading the OS for first time) to make this process interactive or to load a different set of drivers to manage the HDD. Does anyone have a clue?

New Install Error on Windows Vista

On a new install I am getting this error when I try to request license.
I am trying to install it locally on a new Windows Vista machine.
Server Error in '/B1WebTools' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
Has anyone seen this before?
Edited by: Brett Flake on May 28, 2009 9:31 PM

And how can I uninstall it from a Creative Suite ??
And how can I install then the next full version "directly"??
And I don't really understand.
Adobe Updater cannot install this update, and tries it again after a month, it is downloading this update once in a month, and when it fails, closes itself, and says sorry, see you later in november? And when it fails, I cannot say, please stop bugging me with this.
Almost the same problem with the Adobe Media Player, which cannot play even the files advertised in its own browser, : adobe trainings from adobe related sites, and cannot update itself. It's almost brutal. How does this happen?

Entry point error on windows vista

Similar Messages

Maybe you are looking for