Environment needed for developing, deploying BSP

We have the following ECC environmnet in our office.
ERP 2005, RELEASE 6.0
KERNEL 7
COMPONENT ECC 6.0 NON -UNICODE SYSTEM
BASIS & ABAP SP 14
We also dont have Enterprise Portal and no PI or XI. can we develop BSP without EP?
I want to develop BSP. Can i do it? Do we need to install any thing else? any plug in..or do we need to upgrade our service pack?
We are on service pack 14 and on ABAP Stack.
Any plug in should be installed first? please help or provide some link whihc explains about the plugin's needed for our environmnet...
Regards,
'Jessica Sam

Hi Jess,
BSP development is pure ABAP. You don't need anything more than you would for any other ABAP development.
No plug-ins, no J2EE, no ITS, no XI, no Portal required.
Cheers
Graham Robbo

Similar Messages

Environment needed for developing, deploying the ABAP Web Dynpro

Hi all,
We have the following ECC environmnet in our office.
ERP 2005, RELEASE 6.0
KERNEL 7
COMPONENT ECC 6.0 NON -UNICODE SYSTEM
BASIS & ABAP SP 14
We also dont have Enterprise Portal and no PI or XI. can we develop ABAP Web Dynpro without EP?
I want to develop Web Dynpro's using ABAP. Can i do it? Do we need to install any thing else? any plug in..or do we need to upgrade our service pack?
We are on service pack 14 and on ABAP Stack.
Some one kindly help..this might be a simple question for many people...but i am really in need of information and could not get proper idea after reading the SDN and help.com
if some one has a link .that explains the environmnet that i should have for Web dynpro ABAP..please help.
Regards,
Jessica Sam

Thomas,
Thanks a lot for your patience. Few more minutes of your valuable time..need help.
So i can conclude that with my environmet and ABAP statck ..i can develop Web dynpro ABAP and BSP but not Adobe Forms.
We have BI system in our office which runs on Java Stack and our ECC system is only on ABAP stack.
But we were using ABAP Web services to build interfaces b/w SAP and .Net applications and hence we wanted to use SOAMANAGER,
But SOAMANAGER runs on Java Stack and we dont have Java stack on ECC but have on BI.
So what we did was..did some BASIS settings in BI and ECC systems and finally able to use SOAMANAGER of BI system to manage , create and deploy web services from our ECC system whihc is on ABAP Stack.
Similarly can I also use the Java Stack in our BI system and do some settings at ECC end such that I can buid the interactive forms in ECC and use the Java Stack of BI system.
Kindly please help..i am not getting answers to such questions in help.sap.com...may be people like you who are well experience will only able to guide me better.
Kind regards,
Jessica Sam

Licence needed for Developer Studio ?

Hi all,
is a licence needed for installing SAP NetWeaver Developer Studio ?
Thanks in advance.

You donot need a license for developer studio.
It is based on Eclipse which you can download and install without license anyway.
You will need a (developers) license for the developers workplace however. This is the version where you also run your local Netweaver J2EE. If you donot have a license, after 30 days or so the J2EE wil stop (approx. 30 minutes after startup) with an error message like: no valid license.
The license for the Developers Workplace can be requested like any other license. Your basis team will know the details.
Jurjen.
([https://websmp205.sap-ag.de/licensekey|https://websmp205.sap-ag.de/licensekey])

How Much space will I need for developing apps

I will be purchasing a MacBook Air most likely the $1109 with 64GB and 4GB RAM, I was wondering is 64GB okay for developing apps and personal use. I use about 18GB on my PC and I'm thinking I'll only need about 20GB MAX more, so 38GB used in total. Is the remaining amount good for developing apps, excluding XCODE itself, just the coding/ files needed?
THANKS

If you need to run XP then since BootCamp no longer supports it, your only choice would be on of the virtual software packages to run Windows.
Allan

Is LabVIEW application builder needed for TS deployment?

Does the LabVIEW application builder need to be installed for TS deployment of a project containing LabVIEW VI's?

LabVIEW Application Builder is only necessary if you are deploying LabVIEW files, even then you can use the flag "Include without Processing Item or Dependencies" in all your LabVIEW files to create an image and optionally an installer without requiring LabVIEW (or app builder) at all; however, using this flag is not recommended becuase if you use it you would have to include all the files and their dependencies in your deployment manually (either by including the root directory of your test system or by adding all the files to your workspace) and you would have to make sure that they are not broken and can be called from the run-time engines you are including in your installer.

Jars needed for AIA deployment

What are the key jars needed for an ant based deployment of an AIA application?

HI dere ,
I am trying to install 11.1.1.7 AIA on my 64 bit win -7 machine but don't know why i am again and again getting the same error and i.e "build failed".......i have tried installing and uninstalling for so many times, even after that i am getting errors...
BUILD FAILED
C:\Oracle\Middleware\SOASuite11g\oracle_common\AIA_HOME\Infrastructure\Install\AID\AIAExecuteDriver.xml:223: The following error occurred while executing this line:
C:\Oracle\Middleware\SOASuite11g\oracle_common\AIA_HOME\Infrastructure\Install\AID\AIAExecuteDriver.xml:65: The following error occurred while executing this line:
C:\Oracle\Middleware\SOASuite11g\oracle_common\AIA_HOME\aia_instances\AIA_INST\tmp\AIDExecuteDP_temp_1421998953.xml:209: The following error occurred while executing this line:
C:\Oracle\Middleware\SOASuite11g\oracle_common\AIA_HOME\Infrastructure\Install\AID\lib\AIDDeploymentLibraryTasks.xml:109: Java returned: 1
please help me out
Regards
kabir

What version of Crystal Reports do I need for ClickOnce Deployment VS2005?

Hello,
I have a Windows application that is currently being maintained in VS2005. Eventully we plan to upgrade to VS2008 but for now this is what we are using.
I used the version of Crystal Reports that shipped with VS2005 to build some reports. Now I need to deploy them and I prefer to use ClickOnce. Some time ago, I checked into this process and only one specific version of Crystal could accomplish what I needed: CR XI R2.
Now that Crystal 2008 has been released, I am curious if I can use it as a direct replacement for this package, or if it only supports ClickOnce on VS2008, or if there are any other deployment or version mismatch issues I need to be aware of. If CR XI R2 is still the only option I have for ClickOnce with VS2005, please let me know so I can buy that package instead.
Thanks

You can use click once with .NET 2005 and .NET 2008. Click once MSI is here:
https://smpdl.sap-ag.de/~sapidp/012002523100005986302008E/cr120_clickonce.zip
CR XI r2 and CR 2008 are side by side compatible, so if you have apps using the two runtimes on the same computer, it should not be an issue.
Ludek

Where can i download a licensed digital copy of snow leopard???? its need for development

I need os x 10.6 snow leopard for testing web app for game developer.

What is your country? If you go to the bottom righthand corner of the page, there is an icon to set a different country.

Which system priviliges needed for Database Deployment user xmlp

Hi!
I try to run tables_oracle.sql but it fails for the lack of system priviliges. Is there a script for creating the user with all the required priviliges for creating the schema objekts and later for running?
regards

I had to add at least for running the sql scripts following:
CREATE TABLE
CREATE SEQUENCE
CREATE INDEXTYPE
But I get some errors in the html enterprise application and in the oc4j console and I am not sure how to solve this. I want to be sure that the user has all priviliges he need, before searching for other causes.

What project files are needed for development?

Hello,
I have a new WebHelp project that is nearing completion. Our
Web developers are anxious to build the help into their
application, but I'm not sure what files they need or do not need?
Do I just turn over all files to them, or some subset?
Thanks!
Charlie

Hi Charlie
Assuming you are using RoboHelp HTML properly with all files
located on your C drive, you should notice that inside your project
folder are some sub folders. One should be named
!SSL!. Inside THAT folder should be a folder named
WebHelp. You need to supply *ALL* the files (and folders)
that you find inside this folder.
Hopefully this helps... Rick

Is MDT must have for OS deployment in SCCM 2012

I know that existing MDT could be integrated to a new SCCM.
Is MDT must have for OS deployment in SCCM 2012 or SCCM has its own engine for OS deployment?
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Thanks for the answers.
one more question...
I am going to start SCCM deployment in test environment.
For OS deployment part:
if MDT is planned for integration with SCCM should I configure OS deployment in SCCM before adding MDT.
Or in this scenario OS deployment in SCCM could not be touched.
After all previous answers I understand that OS deployment module is part of SCCM installation and is independent from MDT.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

What are the files needed for downloading the MSS -BusinessPackage

Dear Gurus,
Any body can give me a suggestion for downloading the MSS -BusinessPackage ,and also what are the files needed for the deployment -its in a urgent basis and reward points welcome!
regards,
S.Rajeshkumar

Hi Rajesh,
You have to download and deploy the following through SDM (for NW04s/EP7),
1. Business Package for MSS (contains roles,worksets for your Business Package)
2. PCUI_GP (WebDynpro Component)
3. SAP_MSS (WebDynpro Coponent - your MSS application files)
To use ESS and MSS in Conjunction, you also have to deploy Business Package for Common Parts.
Backend SAP systems should have SAP HR and SAP FIN configured.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm</a>
Thanks,
Vamshi

Is WAS 6.2 needed to develop and deploy BSP applications

I'm currently on SAP v4.71. I'm trying to find out if WAS 6.2 is needed to develop and deploy BSP applications or is BSP available straight from the 4.71 box.
Any input is greatly appreciated.
Thanks

Hello sap gurus, I am new to ABAP. I alredy have SAP NetWeaver Enterprise Portal on MaxDB - Developer Edition Sneak Preview installed on my server. However I want to use the ABAP Development Workbench. I do now want to buy a book with cds or go to the sap shop site to get minisap.
Is there any way to Use ABAP Development Workbench with Web Application Server 6.4 or 6.1?
If yes where to get the WAS 6.1?
Thanks

SharePoint Development,Deployment,Staging Environment system requirements(Hardware,Software,Required services)

Hi
   I want to know,
       1. System requirement for VM based Sharepoint 2013 development environment for minimum 3 user's
       2. SharePoint Topologies based on system architecture,system requirements
       3. General SharePoint Development environment with all required services
       4. SharePoint Deployment/Staging environment with all required services
Please help me to get the detailed informations on the above
Regards,
Siva

Hi Siva_SREC,
My environment built for three developers is a 3-tier SharePoint farm. The physical hardware has 32 GB RAM divided as the following virtual machines that all get hosted inside Windows Server 2012 Hyper-V (Datacenter edition)
Active Directory - 2 GB: Used to provide authentication to all joined virtual machines in the farm.
Enterprise Database - 6GB: Used to host all SharePoint databases and TFS database.
3 x SharePoint Farm - 6GB: It depends on how big your project are. For example, if you need each develop to develop SharePoint in particular farm then you should separate 3 farms. Each farm has a SharePoint farm configuration database and relevant database.
If you need multiple developers to develop on the same farm then you need to join another server to the existing farm.
Team Foundation Server - 4GB: Used to store source code and files and for development collaboration
We have remaining 2 GB and it's quite enough for the physical host to run Hyper-V. I've also had a few other machines for specific purpose. For example, I've done building a single WAC farm that provides Office Web App service to SharePoint. I could turn
off one of SharePoint machines when my developer isn't working in order to test OWA. If you are having chances to work on SharePoint 2013 app development project so you would need to have a dedicated machine acting as a Provider that is responsible for providing
web service to the SharePoint. Of course in this case you use provider-hosted app or the combination of SharePoint-hosted app and provider-hosted app. Personally, this machine shouldn't be joined to the AD domain controller. It should be a separate AD because
in real-world scenario, your provider isn't the same AD with client's environment.
In terms of SharePoint topology design, I'd consider configuring 2-tier farm (WFE & App) because in many cases, you would have to deploy your solution in the environment that has many machines separated each other.
At the end of the day, it all depends on your budget and the size of your project. I would say there is no silver bullet on the hardware requirement. For example, the hardware needed for large project is totally different from the one for just SharePoint
branding task.
Hope this helps you.
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Recommended Requirements for Development Environment

Hello,
what are recomended requirements for development enviroment for WebCenter. We intend to have JDeveloper and WebLogic server with WebCenter on our developer machines and we are wondering wht would be appripriate hardwer to run all of this smoothly.
For JDeveloper with the WebCenter extension, 2GB RAM should suffice and WL with WebCenter requires somewhere between 3-4GB. Do you think we really need 6-8GB RAM for developers? What processor power would you recomend?
Thank you for your answers,
Martin

6-8 GB ram is overkill.
I can do the development quiet easy on a 4GB machine.
When i take a look at the memory usage of jdev and the integrated WLS they both sum up to 1.5 to 2GB.
if you however are planning on running a standalone WLS instead of the integrated WLS than you need somewhat more memory. Are you going to develop for webcenter spaces? If so, does every developer need a WLS with webcenter spaces installed? If so, 8GB ram is not overkill!
So conclusion:
A modern processor. One of the latest core2duo or i5,i7 processors.
4GB ram when you use jdev + webcenter extension and run integrated WLS
6GB ram when you use jdev + webcenter extension + integrated WLS + standalone WLS
8GB ram if developers need their own instance of webcenter spaces.
I also think 64 bit OS realy helps a lot for this...
Currently i am working on a following machine (laptop)
core2duo P8600 @2.4 Ghz
3GB ram (win xp 32 bit)
on this machine i use jdev + webcenter extension and integrated WLS. I can develop quiet easy but i have to restart jdev and the IWLS quiet often.
At my own laptop at home i have following setup:
core2duo P9400 @2.53ghz
4GB ram
jdev + wc extension + IWLS runs very good. Deploying goes faster, testing goes faster,...
I tried running webcenter spaces on that machine and i could wait ten minutes before a page loads. Realy not productive.
I need to do some development on webcenter spaces and my new laptop is currently in order:
i7 720q @ 1.7ghz
8GB ram
I hope i can run webcenter spaces on this...
Edited by: Yannick.O on Aug 10, 2010 12:30 PM
Edited by: Yannick.O on Aug 10, 2010 12:34 PM

Environment needed for developing, deploying BSP

Similar Messages

Maybe you are looking for