Environment Taxes added to Sales Order - Belgium

Dear Gurus,
Due to new legislation, we need to add environmental taxes for certain types of equipments in sales order.
Can you please guide me step by step on how to do that?
I believe that Tax has to be maintained at material level as it depends - in that case - of the level of "pollution" generated by the vehicle sold to the customer.
How can we make sure that tax appears thereafter in the invoice when billing the Sold to Party?
Thanks for your help.
Kind regards
Christian

I believe that Tax has to be maintained at material level
Normally, tax will always be determined based on the region of the origin state and region of the destination state and NOT on material.  Of course, I am not aware of Belgium statutory rules.
Nevertheless, Check note 1434103 - point 4.2 where explanation is given on tax.  It has also been mentioned that you need to contact operations.belgium at sap dot com for specific TAX settings.
thanks
G. Lakshmipathi

Similar Messages

  • Tax date in sales orders and invoices (Billing)

    Hello Experts,
    I have an issue related to Tax date in sales orders and Billing documents.
    In our environment we calculate taxes at the time of sales order creation and billing document (invoice) creation.
    Currently we modified 'ZXFYTU03' exit to pass tax date which is system date. Our business processes are such that, there is a gap of 3-5 days between sales order creation and billing creation. So for some orders we see tax discrepancies between order and billing.
    Through forums I understand that we can use 'service rendered date' at sales order item level. Solution would be passing date in 'service rendered date', we can pass date in 'service rendered date' field in sales order.
    The problem is to copy same date in billing document 'service rendered date'
    Does anyone have any idea how we can copy the sales order service rendered date to invoice service rendered date?
    Through forum i understand that we can use copy controls, data transfer routines etc...Appreciate if someone can guide me on how i can use these...
    Thanks in advance
    Pradeep

    Tried 2 options...
    1. Modify program RV60AFZC (FORM USEREXIT_FILL_VBRK_VBRP) to pass VBRP-FBUDA = VBKD-FBUDA. But in later part of the process, in SAPLV60A-LV60AA21 (perform fakturadaten_lieferbezogen), VBRP-FBUDA is overwritten by LIKP-WADAT_IST which is goods movement date. So this is not solving my problem.
    2. Modify program ZXVVFU08, to get service rendered date from VBKD-FBUDA based on CVBRK-XBLNR (Sales order) and populate CVBRP-FBUDA. But unfortunately this user exit is being called after user exit 'ZXFYTU03' where tax related data including tax date which is being passed. Somehow tax date in this user exit 'ZXFYTU03' is document creation date which is system date.
    With 2nd option, service rendered date from sales order is copied to invoice doc, but the tax is calculated based on document creation date since the tax user exit 'ZXFYTU03' is being called first...
    Per this, coustom routine did not work...
    Refer: Service Rendered Date (VBRP-FBUDA) for SD Invoice

  • Tax calculation on sales order and invoice is different

    2007A, SP0, PL49
    The tax on a sales order does not match the tax on the linked delivery and invoice by 1 cent. We take payment based on the sales order amount as the delivery and invoice are done after the fact. Why is the tax calculated differently on the delivery/invoice? We would want it to always match.
    Item price = $111.04. Taxcode rate 13% has combination of 5% GST + 8% ONTAX.
    On Sales Order, ONTAX = $8.88
    On Delivery/Invoice, ONTAX = $8.89
    Can someone please explain the difference? Is rounding/tax calcualtion controlled by system settings per document?

    Something must be wrong with your Sales Order tax.  The actual tax would be 8.8832.  Round up to 8.89 is correct.  Do you have any SP, FMS or add-on been used?
    Thanks,
    Gordon

  • Changing Tax Code in Sales Order

    Hi All,
    I've a requirement to change the tax code of MWST CT from normal value XX to a new tax code in sales order for few excpetion cases.
    For normal cases the tax code will always be XX for MWST CT in the sales order. However for very specific business need the tax code for the existing sales order needs to be changed to a new value. The need for changing the tax code always arise after creating the sales order.
    Kindly suggest the possible ways to meet this requirement.
    Regards,
    Ashish

    Changing the tax code in the sales order is not std sp procedure and I don;t think sp allow tampering with it either.
    The taxes are based on the combination for customer and material and I suggest that you maintain all tax codes at the material and customer level for all combinations possible and each customer is alloted one unique one.
    What are the possible reason why tax changes. It can only be the delivery address is changed. If the material iself changes then you may have to modify the sales order itself but if there is a change in the ship to party then....
    Now if the shipto party changes then you can always redetermine taxes in billing where the actual taxes will be redetermined based on the new conditions.
    If you see the tax line item in the sales order you will see that it is greyed out.
    You can change the excise duty but not taxes.
    This is the default where the condition type is prohibited from changing manually. But if you change the setting to Free or manual then you can change the value of tax bu the tax code will be as determined by the combination of material and shipto.
    regds
    Jude
    Edited by: jude xavier on Sep 7, 2008 8:23 PM
    Edited by: jude xavier on Sep 7, 2008 8:24 PM

  • Change Tax Classification in Sales Order

    Hi all,
    I have a question about tax classification in sales order.
    I know that taxable or non taxable is determined by a variety of key (by material, order type, departing country & destination country, etc).
    I use Domestic Taxes as a key to determine taxable or nontaxable. To do that, I need to set up tax classification in customer master and material master, right?
    Based on that combination, I can determine if it becomes taxable or nontaxable and if so by how many percentage.
    OK.
    Here is my scenario:
    The customer and material I use to create sales order is set as taxable. So, when I create an sales order, the tax and its % is automatically presented in conditions.
    But how do I do if I want to make only this sales  order be nontaxable?
    I changed Tax classification from '1' taxable to '0' nontaxable in Billing Document Tab at Item level, but tax is still there in Condition Tab.
    I thought taxable or nontaxable can be changed by this way. Am I missing some procedure?
    Regards,
    Screen Field:VBAP-TAXM1

    Hi,
    When you set the tax condition to your country and set the tax rate in VK11 based on the customer tax classification and material tax classification, it should pickup in the document.
    How can it posssible to have tax for one document and no tax for the other. Tax is uniform, and it will be applicabe to all customers (certain exceptions also there). In any case the customer is not taxable ot material is not taxable, maintain the customer / material tax classification as '0' and don't maintain any condition rate for that.
    Prase

  • Excise CIN amounts not updated in TAX field in Sales Order Pricing

    Hi,
    I am not getting the Excise Amount [CIN] i.e BED + ECS + SHE Cess in Tax field of Sales Order Pricing Procedure. only Sales Tax amount is showing.
    Plz let me know, where did I go wrong in the Configuration.
    Thanx in advance.
    with best regards
    Jabbar

    Abdul,
    What you have said is correct with regards to condition record creation, excise rate picking and its calculation.
    On clicking the "analysis" button in pricing screen (Sales item details --> condition -->) try to analyse for each condition type
    we can resolve it
    Check within the condition type whether you have entered condition category = D, it must be like this
    Cond. class   =  D Taxes
    Calculat.type  = A Percentage
    Cond.category = D Tax
    In Pricing Procedure Activate "Statistical" Indicator, it will definitely appear in the tax field.
    Regards
    Sathya

  • Change Tax code in sales order

    Hello Friends,
    We have a requirement for the tax code determination - There are two way determination of tax code in sales order
    -> From the tax condtion records
    -> From manual input of tax code in the sales order
    Could you please advice on how we can insert manually the tax code since the standard SAP not supports the requirement.  For your information, business case not supports to maintain condition recors for those tax codes to insert manually.
    Please advice
    Best Regards,
    Goutham

    Hi,
    During sales order creation, the tax classification from the customer master is proposed in the sales order document.
    In condition record, you maintain the tax code for this tax classification along with some other field combinations. Accordingly, teh percentage linked to the tax code will be decided as teh % of tax for the customer. This is the logic.
    If you want to change the tax code in the sales order, it is not possible. However if you really want to change it, you can achieve it by changing the tax classification of the customer in the sales order header. This is available in the billing tab of order header. The field is "Alternate tax classification". You can change the desired tax classification here. Correspondingly by linking the tax code to this tax classification in VK11, you should be able to change the applicable tax code in the sales order.
    In summary, you should change the tax classification in order to change the tax code which is linked to it.

  • SDK Error -5002 when adding a sales order

    I'm getting an error -5002 when adding a sales order.
    Source code:
          IDocuments m_so2 = SBOCOMUtil.newDocuments(icmp, SBOCOMConstants.BoObjectTypes_Document_oOrders);
          line = m_so2.getLines();
          m_so2.setCardCode("2173231916");
          m_so2.setCardName("test Sales order");
          SimpleDateFormat formatter = new SimpleDateFormat("dd.MM.yyyy");
          Date today = Calendar.getInstance().getTime();
          m_so2.setDocDueDate(today);
          line.setItemCode("01005");
          line.setDiscountPercent(new Double(10));
          line.setItemDescription("description Testing");
          line.setQuantity(new Double(3));
          line.setTaxCode("0");
          line.add();
          long rc = m_so2.add();
    Question:
    Where can I find a list of error codes that can be easy to understand? PDF, word, etc.
    Thanks.

    Hi Diego,
    Looking at your code I see that you are doing a
    line.add();
    You don’t need to have this here unless you are adding another line to your document.
    Maybe this will help you.
    Also just because java is a bit different from VB get the last error message using
    SBOErrorMessage errMsg= comp.getLastError();
    System.out.println(errMsg.getErrorMessage());
    -Cormac

  • 50% tax calculation in sales order

    Hi everyone,
    I have maintain LST in custome master and material for 50% tax ,and also I have maintain condition record for 50%,But in sales order  tax is calculated at 100% tax.How I can get 50% Tax value in sales order.
    Example, basic price -  100
                   Bed                16
                   Ecess -            3
                   tatal              116.5
                   LST(3%)          3.5 (it is 100% tax,but I want 50% as 1.75)
    how can I get
    Regards
    Prabudh

    Maintain the Condition record with the combination of customer tax clasification and material tax clasification (50%) of LST 1.75%
    then system will calculate 50 % tax OW system will not caluculate automatically 50 % by mentioning the material Tax classification(50%)
    if you have any clarifications let me know
    reward ponts if helpful
    Regards
    Sriram

  • Reg: function module to fetch the overall taxs for  a sales order

    Hi Experts,
    I need a fuction module which fetches all the taxes for a sales order with the tax values.
    (i.e) i need a function module with displays the overall tax values and not line itemwise..
    Regards,
    Vikram.S

    Hi,
    Check if it works
    POS_SALES_DOCUMENT_HEAD_TAXES

  • Adding a sales order with DI Server 8.8 results in document with no rows

    Hello,
    I am facing a weird problem situation running DI Server in a 8.8 (pl8) environment.
    When adding a new sales order document, the add operation results in a "success", but when I go to B1 client and see the document, there are no rows at all.
    Please see the xml message I am posting to DI Server. There is one in row specified.
    Anyone had similar experiences or possibly even been able to resolve this ?
    Best Regards,
    Henry
    = = = = = = = = = = =
    <?xml version="1.0"?>
    <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
      <env:Header>
        <SessionID>C72BD58F-3A5F-4074-86CA-6776372ADB39</SessionID>
      </env:Header>
      <env:Body>
        <dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="Add Documents">
          <BOM>
           <BO>
              <AdmInfo>
                <Object>oOrders</Object>
              </AdmInfo>
              <Documents>
      <row>
        <DocDate>20091202</DocDate>
        <DocDueDate>20091202</DocDueDate>
        <CardCode>234485</CardCode>
        <NumAtCard></NumAtCard>
        <DiscountPercent>0.00</DiscountPercent>
        <Comments>fdsfds</Comments>
        <SalesPersonCode>8</SalesPersonCode>
        <TransportationCode>14</TransportationCode>   
        <DocumentsOwner>-1</DocumentsOwner> 
      </row>
    </Documents>
    <Document_Lines>
    <row><ItemCode>001150x</ItemCode>
    <ItemDescription>JAUHESAMMUTIN 12KG ALKU</ItemDescription>
    <Quantity>1</Quantity>
    <Price>4</Price><Currency>EUR</Currency>
    <DiscountPercent>0.00</DiscountPercent><WarehouseCode>01</WarehouseCode><SalesPersonCode>8</SalesPersonCode>
    <VatGroup>V1</VatGroup><FreeText /></row>
    </Document_Lines>
    </BO>
    </BOM>
    </dis:AddObject>
    </env:Body>
    </env:Envelope>
    02/12/2009  12:02:39  Response (OK)
    <?xml version="1.0"?><env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Body><AddObjectResponse xmlns="http://www.sap.com/SBO/DIS" CommandID="Add Documents"><RetKey>15</RetKey></AddObjectResponse></env:Body></env:Envelope>

    I thinks that you do not have more than necessary in the XML Code.
    To try to test it in a different environment, what about?
    For example,
         a.SBODemo database is used
         b. Reinstall SBO Serivce Manager
         c. Delete folder or Rename folder SM_OBS_DLL
    Hope you will help a little.
    Best regards,
    HyangHang

  • Unable to get the tax value in Sales order

    Hi Forum,
    I am preparing a sales order for a customer with a material.
    When I go to the item conditions tab, I see that the correct tax value is being calculated but that tax value is not appearing in the TAX field.
    Net value is appearing correctly in the NET field.
    Please help me which are the areas of concerns i should look for to get the tax amount in the TAX field.
    Many thanks.
    Regards,
    Sheetal

    Dear Sheetal
    Go to V/06, select the tax condition type and execute.  There check whether you have maintained "Condition Class" as D.   If not, maintain D and then retry.
    thanks
    G. Lakshmipathi

  • Change the Tax Code-  In Sales Order i have  Tax code for VAT

    In Sales Order i have  Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
    Where the "P4" Tax code is picking in Sales Order.
    How to change the Tax Code.
    Urgent

    Hi CHAKRI,
                     Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
    Regards
    Ram Pedarla

  • Tax Amount(CST) is not coming in tax field in sales order

    Dear Friends,
    I have created a sales order  and in that sceanrio CST is applicable. In sales order the CST amount is coming but my problem is that its not coming in total sales order value.
    In my sales order, value is like below mention: -
    Pr00 1000
    CST  4.00
    while I select the line item and go to condition tab its showing both value but while i see the upside field net value and tax field in net value field 1000 is coming and tax value field showing zero value instead of 4.00
    I have mentioned the settings in condition type for CST
    Cond. class   D Taxes
    Calculat.type A Percentage
    Cond.category D Tax
    and maintained the condition record against Tax code defineed for CST 4%
    Please advice me what could be the reason of this problem and kindly give the solution.
    Regards
    SV

    Hi,
    Re-check your pricing procedure maintanance, whether relevant routines maintained in "Requirement(10)" & "Alt.Condition Base value(16)"?
        if its maintained check in V/06- cond type details of your tax cond type- Exclusion field is "Blank" & in Condition records too.
    Regards,
    Reazuddin MD

  • Withholding Tax Selection during Sales order creation

    Hi,
    Do we have an option to select or deselect Withholding Tax Codes at the time of Creating Sales order / Billing for the Customer?
    As, We get the popup during the time of invoice creation to the vendor.
    Your inputs are appreciated.
    Thanks & Best Regards
    Shashikanth.M

    Hi,
    Refer the below OSS note:-
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=178824]
    Regards,
    Gaurav

Maybe you are looking for