EPM V10 issue : Install conflict between PCM 10 & BPC 10

Our team is working on a prototype of EPM 10 solution (BPC 10 & PCM 10). We have met 2 conflicts between BPC 10 and PCM 10 at client side (Excel & Internet Explorer):
1. There are 2 separate EPM Add-in for Microsoft Office (Excel). One for BPC and another for PCM. We should install EPM Add-in PCM at first, otherwise we can't install it after BPC. Obviously EPM Add-in for PCM is a previous version refering to that of BPC.
But after installation of EPM Add-in PCM then BPC, we lost the "Data Manager" tab in Excel ribbon.
2. After installation PCM 10, we canu2019t access BPC via Internet Explorer any more. IE shows u201CAdd-on can not work u2026u201D. But we can open BPC Web client via Chrome. Is there any conflict of the ActiveX between PCM & BPC for IE ?
Thank you for any proposition & solution.
Kind regards,

Maybe I don't understand your description of the problem clearly, but I want to state that there is intended to be only 1 EPM 10.0 add-in for Excel which works with both BPC and PCM.
Also since both the products you mention are in Ramp-Up currently, feel free to reach out to your customers ramp-up coach(es) to assist further.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Similar Messages

  • BusinessObjects EPM V10 安装错误:SAP BPC 10和SAP PCM 10安装后的客户端错误

    版主好！大家好！
    公司正在进行SAP BPC 10和SAP PCM 10的安装测试并进行项目前期准备。在安装之后发现，EPM Add-in for Microsoft的PC和PCM版本安装之后，本来在Excel里的u201CData Manageru201D菜单消失了。也许是PCM和BPC的Add-in不兼容。
    第二个问题是使用Web版本的客户端时，PCM和BPC针对IE浏览器的Add-on有冲突。安装了PCM之后就不能够再链接BPC了。是否是ActiveX的问题？
    谢谢！
    附：
    SAP BPC: SAP BusinessObjects Planning and Consolidation
    SAP PCM: SAP BusinessObjects Profitability and Cost Management

  • Are there any known conflicts between Mountain Lion and Microsoft Outlook for Mac? After installing, I can't send or receive eMails

    Are there any known conflicts between Mountain Lion (10.8.3) and Microsoft Outlook for Mac? After installing, I can't send or receive eMails. Using a Macbook Pro.

    Is this a recent problem or has it been going on for some time.  If you just updated to ML, you might want to confirm that you've update to the latest MS Office / Outlook patches.

  • Conflict between one or more third party MIDI or audio drivers

    I have a Logic Pro 8 session with 17 audio files, each one of which have 2 to 4 plugins.
    Every time I try to bounce the session to an .aiff or .mp3 this dialog box appears:
    Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
    Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers.
    I haven't installed any extra drivers/midi controllers/software. I just work entirely with Logic and an M-Audio external card (which is unplugged and audio preferences set to Built-In Input). And anyway, this issue arose after having recorded all the audios, after doing the editing, so no other possible installation move was done.
    Please, help me find a solution.
    Thanks.

    I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
    Nothing on User/YourName/Library/Audio/MIDI Drivers.
    I have found 3 AVID folders on Applications:
    - Avid MetaSync Manager
    - Avid MetaSync Publisher
    - Avid_Uninstallers
    Shall I remove these?
    There is also an empty folder called Digidesign on User/Library/Audio/Plugins
    I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

  • Is there a conflict between Safari 4.0.3 and the latest version of FlashPlayer? Everytime I try to download, FP ends up in "Disabled Plugins" in my Library, and I can't move it out of there.

    Is there a conflict between Safari 4.0.4 and the latest version of FlashPlayer? I have tried repeatedly to download and install the latter. Instead of properly installing, FP ends up in my Disabled Plugins folder in my Library. Help!

    Safari 4.0.4 or 4.0.3 ??  your profile shows you are running v10.6.8.
    If you are running v10.6.8, click your Apple menu  / Software Update. The current version of Safari is 5.0.5.
    Then if necessary, reinstall Flash.

  • GarageBand has detected a possible conflict between one or more third party

    I have 200 computers that when you launch GarageBand 3.0.5 it comes up with the error:
    GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers
    Our image is basically 10.5.6 with mainly Adobe CS 3 suite. No other sound programs or anything sound or video related was installed besides iLife 06 and I'm not sure what is causing the issue. I have tried reinstalling iLife 06 and run all updates available from Apple and repairing permissions. I have went through the plugins in /Library/Audio folder and haven't had any luck at all.
    What gets me is under the admin account I have it working fine by removing the default emagic plugin in /Library/Audio/ etc.. but if I log in as a regular user without admin privileges i get the error.
    I have tried deleting pref files in the users Preferences folder, but I just can't find a workaround.
    It kinda seems to be like a permissions issue since the Admin account works, but I have tried pushing permissions 777 to /Library/Application Support/ and to /Library/Audio and to /Applications/Garageband.app and still no results.
    I was blaming an Apple update because things worked fine before, I'm not sure what caused it. I reinstalled the combo update and that didn't help either.
    I reformatted and installed 10.5 and upgraded using the combo updater to 10.5.6 and installed iLife 06 and installed all available updates from Apple like I have in the image and things work fine.
    But I need to get this working on our image.........Anyone have any ideas as to what could possible be the issue and might know a fix????
    Google searches the solutions I have found are repairing permissions and deleting plugins. I have tried repairing permissions and have no plugins besides the defaults, but I have already removed the emagic one and nothing else is in there.
    Thanks!!

    To get me through the year I deleted a bunch of Microsoft Office Receipts in /Library/Receipts and it fixed the issue.
    I have no idea why, deleting a receipt from another app shouldn't affect anything, but it worked. I spent many hours trying to figure out a solution and this worked!
    We are running iLife 09 now and no issues so far!

  • EPM 11.1 Install Problems - Apps not in SS/Can't Log into Wkspce/Install ?

    Hi all...
    Was attempting to do an install w/ separate tablespaces in Oracle. Read install doc and saw this note
    "To use a different database for each product, perform the “Configure Database” task separately for each product.
    In some cases you might want to configure separate databases for products."
    Guess I may have read it wrong but basically, tried running config for an entire app one at a time vs. just running the config database and then performing the remainder of the confg tasks for all apps. Validates okay (except Studio -- connection string doesn't seem to be working although looks okay in the .properties file -- but can fix that later), however now I have the following problems:
    Planning, Reporting and Analysis apps are not showing up in Shared Services nor are there any roles associated with these apps so I can't provision a user for access.
    Can't log into Workspace to see if my apps are are there -- tried using "admin" "password" but get error message "You must supply a valid user name and password to log onto the system". Which makes sense -- there are no roles for these apps and, therefore no users w/ access to these...
    So, first question -- When Oracle says to run the Configure Database task separately for each product, does that mean I was supposed to select only this specific task for each product and then run the config for all products w/ the "configure database" deselected?
    Next question -- Any way to force the app to register to Shared Services? The apps that are not showing in Shared Services do not have any apparent tasks for doing this and some only have a choice between configure database and deploy application server -- don't really want to chose either of these as would think it would get really, really messy (that is, would it deploy a second app server or update the current one?)
    Trying to avoid uninstalling but that may be the only option. However, before I do that wanted to make sure I understood the Oracle note about "Configure Database" (see question above).
    Any thoughts welcome.
    KJ

    So, John...
    Good info on the the EPM Workspace issue. After installing the R&A Migration package, BI Plus and roles were available in Shared Services and I was able to log into Worksapce with both my previously non-working Admin/password account and a test user account. And, as an added bonus, the previous Oracle connection string error I was having w/ Essbase Studio disappeared!
    Unfortunately, Planning and EPMA did not get a boost from that fix so, am currently in the process of uninstalling, which as you noted was not all the clean at all -- actually didn't see any difference after the uninstall from the install, and installing.
    Install appears to be laying down the files (manually deleted the Hyperion directory...) okay. Will have to see how it goes from here. Think I will try the route of doing all the configure database tasks for all the apps first (to keep them in separate tablespaces and instances) and then doing the config for all the apps at one time.
    BTW... Is there a "published" configuration sequence? I read the "Start here" and Install doc from cover to cover before starting the install and config and did not see any specific notes on the order of configuration... Just curious as I have seen several notes that allude to this being in the install doc. Am I just totally missing something?
    KJ

  • Conflict between program Mac mail and program Microsoft Outlook e-mail???

    Denmark, Kolding, 30th of September 2010
    A conflict between program Mac mail and program Microsoft Outlook e-mail?
    For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
    Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
    I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
    1. Sending from my Mac plain mail as "plain text "(during formatting):
    Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
    2. Sending from my Mac plain mail "formatted text" (during formatting):
    Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
    3. Sending plain mail "as normal text "(during formatting)
    In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
    4. Plain text mail as "formatted Text"
    Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
    5. Sending mail with file attached:
    After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
    6. Sending e-mail with photos directly from iPhoto
    iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
    The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
    The above problems can be partly avoided by the following:
    1. Only send mails as plain text
    Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
    2. Sending mail with attached file
    Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
    3. Sending mail with photos from iPhoto
    Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
    If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
    I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
    Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
    Apple/Mac is too good a product to make these problems!!
    Best regards
    Peter Larsen
    <Edited by Host>

    Welcome to Apple Discussions!
    The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
    Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
    http://en.wikipedia.org/wiki/ASCII
    If you want to post a website that is universally understood, see the hints here:
    http://www.anybrowser.org/

  • Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device.

    Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device."
    (Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
    Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
    When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
    There's also a sound of static.
    The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
    Tony

    Hello,
    open your Audio MIDI Setup utility and set the input to 44100
    https://discussions.apple.com/message/12710638#12710638

  • Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

    Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
    Thanks for any suggestions you can provide!
    Marilyn

    Hey there Marylin,
    It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Conflict between iTunes Match and Windows 8.1

    I have been running iTunes on my fully updated Windows 8.1 PC for some time, without any particular issues. A few days ago, I activated iTunes match. It worked just fine, in the perspective of my iPhone and iPad. However, my PC stopped being responsive: Long time-outs on just about anything, and dialog windows refusing to appear (one of them being the McAfee console ....). A virus search using Microsoft's emergency services showed nothing.
    The moment I de-activated iTunes match, everyhing reverted to normal.
    My conclusion is, there is a major conflict between whatever the iTunes match service does, and the Windows 8.1 operating system.
    Any idea what this is all about, and if there is anything I can do about it (except avoiding using the match functionality)?
    I have the latest update of iTunes for PC.

    Hi lars1950,
    Welcome to Apple Support Communities.
    It sounds like you're seeing issues with Windows responding slowly since enabling iTunes Match. The article below may resolve the issue for you, it describes possible conflicts with Layered Service Providers and how to prevent them.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    I hope this helps.
    -Jason

  • Issue installing Photoshop Camera Raw 6.7

    Hi guys,
    I having issues installing Photoshop Camera Raw 6.7. I gt this error "Photoshop Camera Raw 6.7 Update Other processes are running which conflict with update installation. Please close them and try again. Error Code: U45M1P19". I restart the Computer (Windows 7) and closed all Adobe programs but the problem persist. Any ideas...
    Thanks in advance!
    P.S. I have Adobe Design Premium CS5.5

    I have exactly the same issue and error number. The only difference is that I am running  a Mac with OS X10.8.2
    I also tried installing Camera Raw 7.1 and that did not work either.
    I downloaded the Adobe Support manager and it reported everything as OK.
    I have tried rebooting, turning off all apps. Nothing seems to fix this.
    Any clues on what might be the problem and how to fix.
    The reason I need the update is that I am using LR4 and want to edit in Photoshop CS 5.5 and it tells me I need to update  my Camera raw.

  • Is there a known conflict between a CalDigit FASTA-GU3 sata/USB 3 card and an ATI Radeon X1900XT video card?

    Hello all.
    I am having trouble with my Mac Pro (circa 2008) not powering up the monitor (an Apple HD Cinema Display 23 inch).
    Here's some history.
    For about two weeks I was having trouble waking up the monitor from sleep. I would have to reboot the computer to see the screen.
    Then the screen wouldn't wake up after many reboots. I tried the Apple Cinema Display on my MacBook Pro laptop an on an older Mac Mini. The display didn’t' work on any of them.
    I then hooked up a Samsung monitor to all three computers in turn. The Samsung worked fine with each.
    From that I deduced that it was Apple HD Cinema Display that was at fault.
    I replaced it with one I bought from a friend - in perfect working condition.
    The new Apple Display worked fine with my Mac Pro.
    Problem solved - or so I thought.
    Now, a few days later, I am having a repeat of the same problem. The Apple Cinema Display won't wake up.
    I removed all the peripheral devices, still no joy.
    I removed and reseated the video card (after blasting all with compressed air).
    Still no joy.
    I then removed the CalDigit FASTA-GU3 sata/USB 3 card I installed about a year ago.
    Now the Apple Display came back to life.
    So my question is, are there know conflicts between a CalDigit FASTA-GU3 and an ATI Radeon X1900XT video card?
    If so - is there a fix?
    Also open to other theories.
    Other tech specs:
    Mac Pro (from around 2008) 2 x 3 GHZ Quad Intel Xeon.
    OSX Lion
    The video card is an ATI Radeon X1900XT (512 MB)
    Apple HD Cinema Display - 23 inch
    Many thanks.

    Thanks for the info on the Expansion Slot Utility. I found it and ran it. It shows no problems. It shows the ATI Radeon X1900XT to be properly installed and running at full capacity.
    I found a reliable dealer of flashed ATI Radeon 5770 cards. A couple of trusted friends have had good luck with cards from the dealer.
    So I will have that on stand-by for when/if the existing card fails completely.
    Thanks everyone for your input.
    A

  • Conflict between refeneces in Lightswitch\ and Silverlight\ after update to Visual Studio 2013 12.0.40302.00 and SQL Server Data Tools 12.0.50226.0

    After updating VS and SSDT there began a conflict with references in two directories under the SDKs folder (Lightswitch and Silverlight):
    Error 91
    The type 'System.Data.Services.Client.DataServiceCollection<T>' exists in both '
    ...\Microsoft SDKs\LightSwitch\v4.5\Client\Microsoft.Data.Services.Client.SL.dll' and 'both '
    ...\Microsoft SDKs\Silverlight\v5.0\Libraries\Client\System.Data.Services.Client.dll'
    ...\SPDCDataObjectContext.cs 1478
    52 Spac.DesktopClient
    I thought since the Lightswitch directory was newer that I would comment out the Silverlight directory and see how far that would get me. Now I get:
    Error 16
    The type or namespace name 'Composition' does not exist in the namespace 'System.ComponentModel' (are you missing an assembly reference?)
    ...\Spac.DesktopClient\GeneratedArtifacts\ApplicationGenerated.cs
    13 36
    Spac.DesktopClient
    How do I handle the original conflict between refeneces in Lightswitch\ and Silverlight\ ?
    Scott Mitchell

    Thank you. Yes that resolves the conflict but leaves some missing references like the "Composition"
    reference above. I was able to get past that by adding System.ComponentModel.Composition. This is after installing the VS 2013 update 4 build.
    Now I get the following. I'm concerned that I'm taking references from both Lightswitch and Silverlight
    sdk's just to get it to build. These references are required because of the auto generated code. I must have something quirked. Anyway what about System.Data.Common.DbConnection? How can I get it without
    referencing System.Data?
    Error 2
    The type 'System.Data.Common.DbConnection' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
    C:\Source\splat\Splat.Spac\Spac\Spac.Server\GeneratedArtifacts\ApplicationDataObjectContext.cs
    50 16
    Spac.Server
    Scott Mitchell

  • Is there a conflict between Reader XI and Acrobat being used on the same computer?

    I downloaded the new Abode Reader XI. The computer in question has, also, Adobe Acrobat 7. Is there a conflict between them if used on the same computer? I can not open any PDFs and now the saved PDFs I had on the computer will not open and the icon shown on the desktop is gone. Please advise as I scan documents to this computer all the time and the person who needs to see them can not.

    I have Acrobat 8.1.6 and Reader XI on Win XP. Do these conflict? Should I get rid of the newer Reader?
    I'm having problems printing to the PDF print driver, locks up system, shows printer offline in spooler. I doubt problem is with driver itself because I can print a Test Page from it ok. But printing to Adobe PDF from Word & other apps locks up & never completes.
    There's an Exclamation Point next to Acrotray in Explorer. (see image)  What does this mean??
    Have tried Repair install of Acrobat twice.

Maybe you are looking for