EPrint problem with CP1525nw - connection error

I just installed a CP1525nw in our home network. It's wired, and we can print and access the printer's web page from every computer - no problems with local printing.
However, I'm not able to successfully complete the ePrint setup. When printing the information sheet using the control panel, I quickly get the message "Connection Error, Check Connection", and it asks me to hit 'ok' to return to the main menu.
I am able to turn ePrint on and off, as well as enable and disable ePrint, both from the printer's webpage as well as the front LED menu. Each time I toggle the latter, I get a new email address. This successfully displays in the printer's LED window, so I know the printer is able to connect to the internet.
When I manually go to hp's ePrint website, and try to register my printer using the email address, it fails - unrecognized.
I'm aware that in order to complete the installation, the information sheet must successfully print. That seems to be the only thing failing. Any thoughts?
Here is some information about the printer and environment:
- Apple AP Extreme
- Printer directly wired to AP
- IP: 10.0.1.17, DNS 10.0.1.1 (router)
- Firmware: 20101125
Thanks again.

Everything is now working just fine. I wish I could say that I know what changed, but it must be magic.
This morning, after letting the ePrint stuff rest for a few days, I removed the service (using the web server), cycled power on the printer, added the ePrint service to the printer, and now everything is just fine. I'm able to print from our iPad no problem.
Seems hp fixed something, just not sure what.

Similar Messages

Running headless not solving problem with X11 connectivity error

I'm having a variation on a problem referenced in quite a few places, but I don't seem to be getting any closer to a solution.
I'm running a stand-alone, console-only application that uses javax.swing.text.html.HTMLEditorKit to return plain text from HTML for use in multi-part e-mails. That class is causing the following error when running on the Unix server:
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:124)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at java.awt.Toolkit$2.run(Toolkit.java:796)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:787)
at java.awt.Toolkit.getEventQueue(Toolkit.java:1572)
at java.awt.EventQueue.isDispatchThread(EventQueue.java:731)
at javax.swing.SwingUtilities.isEventDispatchThread(SwingUtilities.java:1269)
at javax.swing.text.StyleContext.reclaim(StyleContext.java:448)
at javax.swing.text.StyleContext.addAttribute(StyleContext.java:305)
at javax.swing.text.html.StyleSheet.addAttribute(StyleSheet.java:568)
at javax.swing.text.StyleContext$NamedStyle.addAttribute(StyleContext.java:1497)
at javax.swing.text.StyleContext$NamedStyle.setName(StyleContext.java:1307)
at javax.swing.text.StyleContext$NamedStyle.<init>(StyleContext.java:1255)
at javax.swing.text.StyleContext.addStyle(StyleContext.java:117)
at javax.swing.text.StyleContext.<init>(StyleContext.java:97)
at javax.swing.text.html.StyleSheet.<init>(StyleSheet.java:177)
at javax.swing.text.html.HTMLEditorKit.getStyleSheet(HTMLEditorKit.java:387)
at javax.swing.text.html.HTMLEditorKit.createDefaultDocument(HTMLEditorKit.java:218)
I don't have the option of starting an X11 service on this server, so I have to find another way around.
I'm using Java 1.4.2, so my understanding is that headless mode should solve this problem for me. I've tried adding the statement
System.setProperty("java.awt.headless","true");
to the code with no avail, and tried running it with the option "-Djava.awt.headless=true" from the command line, also with no luck.
Is anyone able to give me a tip on what other course of action I can try?

Thanks, but I'm not sure what you mean. I don't know that I have access to "the source of X11GraphicsEnvironment" and I'm not confident I could locate and solve the problem if I did.
I'm a little puzzled that it's not working in headless mode, because everything that my searching turned up indicated that it worked fine in 1.4.2 unless heavyweight components were used, which they aren't.

SAP Screen Personas error "A problem with network connectivity has been detected"

Hi,
We just installed Personas release 100 SP02 and performed the
configuration steps necessary. But when we acces the url and logon to
personas we get the following erre
A problem with network connectivity has been detected.
Please check you connection and refresh your browser.
Any help to solve this issue would be appreciated.
Best Regards.

Please use this checklist to see if everything is correct:
1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
2. SPRO -> Sap screen Personas -> Maintain system has
       - 3 letter system id
       - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format
       - "Service.Uri" without typo and value as /restgui
3, Note 2026487 is installed
4. If target system is different from source system then you are able to access the following
         - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
         - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
Thanks
Chinthan

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

Problem with database connectivity

Hi guys,
I'm having a problem with database connectivity . I'm using the mySQL database & org.gjt.mm.mysql driver.
I've kept the org folder under the directory where the Database.java program is residing .
My program is as follows:
import java.sql.*;
public class Database
     Connection con;
     public void connect()
          System.out.println("In connect.");
     public Connection connectDB(String username,String password,String database)
          try
               Class.forName("org.gjt.mm.mysql.jdbc.Driver");
               String url="jdbc:mysql:"+database;
               con=DriverManager.getConnection(url,username,password);
          catch(SQLException e)
               System.out.println("SQL Exception caught:"+e);
          catch(Exception e)
               System.out.println("Exception e caught:"+e);
          return con;
     public static void main(String args[])
          try
          Connection c;
          Database db=new Database();
          c=db.connectDB("root","","//192.168.0.2/squid");
          System.out.println("Connection created.");
          c.close();
          catch(Exception e)
               System.out.println("Exception caught:"+e);
It gets compiled but gives the following error when run.
Exception e caught:java.lang.ClassNotFoundException: org.gjt.mm.mysql.jdbc.Driver
Connection created.
Exception caught:java.lang.NullPointerException
I don't know why the class is not found.Pl . help me rectify my mistake.Is there any other path to be set?
Thanks.

You need to run it with the JDBC driver in the classpath
java -classpath .;[mySqlJdbcDriver.jar] Database

Every time i try and get on the apps it comes up with server connection error

every time i try and get on to the apps it keeps comeing up with server connection error -1

Hi,
Please refer the link below to troubleshoot the issue
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Web-Services-problem-Server-connection-...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

There is a problem with the connection to CC

Hello, I have a problem with to connection to CC. I can't get ingress to apps. Apps tab shows me an error: "Failed to load. Adobe servers are unavailable.Check your Internet connection and firewall settings and try again." I've done all what was written, but it didn't help. I hope that you can help me.
Здравствуйте, у меня есть проблемы с подключением к СС. Я не могу получить доступ к приложениям. Во вкладке Apps показывает ошибку: "Сбой загрузки. Серверы Adobe не доступны. Проверьте ваше подключение к Интернету и настройки брандмауэра и повторите снова." Я сделал всё, о чём было написано, но это мне не помогло. Надеюсь, что вы сможете помочь мне.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with JCo Connection Pool

Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

EPrint problem with CP1525nw - connection error

Similar Messages

Maybe you are looking for