Eprintcenter printer won't connect to server

eprintcenter printer won't connect to server had it working at first so I delete it now the printer code won't work.

Just posted the same issue.
Think it might be HP's end. Lets wait for a response!!

Similar Messages

Hp C4580 printer won't connect to wireless network, but see network is available.

I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
Help would be great.

Hello there! Welcome to the forums @Cushionman ,
I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
Let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My iCloud email on iPad keeps saying it won't connect to server.

My iCloud email on iPad keeps saying it won't connect to server. Tried removing and adding iCloud back on device already. Says last update was Thursday (3 days ago). I don't use this email much but got a few emails and attachments I need for work from that address. I logged in online from another computer and it worked. Any ideas how to fix this now? I do get email from other accounts and do have internet connection.

Cannot connect to iTune Store
http://support.apple.com/kb/ts1368

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

Try downloading the driver directly from Canon's web site.

Firefox won't update. Won't connect to server.

I get a message that Firefox has critical updates to in stall but when I click on update it won't connect to server.

Greetings,
You may with to post this FireFox question in the FireFox forum: http://support.mozilla.com/en-US/home
Me personally, I would just download and install the new version of FireFox, overwriting the old version: http://www.mozilla.com/en-US/firefox/new/
Cheers!

HT201320 I have an Apple Ipad. I was having problems receiving and sending emails via my yahoo email account. I deleted the account and then tried to install it but it won't connect to server. Could you let me know what I do please?

I have an Apple Ipad. I was having problems receiving and sending emails via my yahoo email account. I deleted the account and then tried to install it but it won't connect to server. Could you let me know what I do please?

I think you have to turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

My nokia e mail won't connect to server

My nokia e mail won't connect to server please help i've tried everything i know

Thanks for your response.
I did that already. I did the full maintenance treatment: Disk Warrior, followed by Applejack AUTO (which does a permissions repair and caches clean), followed by three PRAM zaps.
In accordance with Murphy's Law, it started working again about the time your post came in, but it had been hours of it not working after running the aforementioned gauntlet.
I have my doubts whether it will keep working. Meantime, Mail is humming along on my MBP. If you have any other ideas, I'd love to see them!
Cheers,
Jim

Won't connect to server to print

My printer used to work just fine when it was used wirelessly at home, but now it won't work at school. I have it connected to my own wifi router and it says it is connected succesfully on the printer and the test report. However, when I click apps it says that it cannot connect to the server and I can also not print wirelessly from my computer. How do I fix this?

Hi @tristanbabin
Welcome to the HP Support Forums. I see that you have a couple of issues since moving your Photosmart 6510 printer to school.
Let’s start by attacking this from the second issue where you are unable to print wirelessly from your Windows 7 computer. Let’s get you printing first since you are at school, and following the steps in the next paragraph, might also resolve your connection error message you are getting when trying to connect ePrint.
Please Try the HP Print and Scan Doctor for Windows. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues. You can always download it from hp.com/go/tools. If it doesn’t resolve your ability to print, please let me know if you get anything other than green check marks and the topic they are associated with.
If you see only green check marks ( ), the tool did not find any problems.
If you see green wrenches ( ), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points ( ), the test failed and required user action, but the step was skipped.
If you see a red X ( ), follow the on-screen instructions to resolve the issue.
Now if the Print and Scan Doctor resolves your printing issues, but not the connectivity error message, please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, including screen shots, on how to do this. Please do not stress that the screen shots show a Photosmart 7510 printer, the steps are the same.
Please let me know how things turn out.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Printer won't connect to wifi

Hello
I've recently bought Samsung m2020/2020w wireless printer, but I cannot seem to connect it to wifi. When trying to connect via WPS, then wireless setup light keeps flasing for 2 minutes but won't connect. Also tried to connect the printer to wifi through my PC via cable, but that gives me "general error". Sent my printer for warranty repair, but it came back as OK (they managed to connect it to their wireless networks). I've switched off my windows firewall, tried firmware update on the printer and connecting it to the router using laptop. Wifi works okay with other wireless devices such as smartphones and laptops.
Im using Cisco epc3825 router.

Hello,
what band the printer is using (2.4 or 5 GHz)?
What is the security on the wireless network that you use?
have you tried to connect the printer withour WPS?
because it gives you a general error in wired side, I think your problem is bigger than wireless-only issue.
I think it is better to move your post to the small business->wireless forms that is responsible for your device type.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

[HP Photosmart D110a] Printer won't connect to network

Printer: HP Photosmart D110a
Operating system: Mac OSX 10.6.8
I'm living in a dorm room and trying to wirelessly connect my printer to my computer. I can't connect my printer to my university's network because it's protected. Instead I've been connecting to my printer's SSID network. I go into Settings --> Wireless --> Wireless Settings --> Wireless Setup Wizard --> the printer scans for routers, and then the SSID name comes up in a list underneath my university's closed network. It's called HPD110a.7809C6.
I connect to it, it says it's connected, but then the Wireless light keeps flashing blue. I go back to the Wireless tab and it shows that it's connecting, connecting, connecting... and then there's no connection.
My printer was working a little while ago. It's been tempermental and has occasionally worked. But since the last time my roommate used it and turned it off, it's refused to connect to that SSID network and has thus refused to work. I think I solved the connectivity issue I had before by connecting it to the SSID network, but now it won't connect.
Things I've tried to combat this issue:
Restarted the printer, both by turning it off and turning it on manually, as well as pulling the plug out of the back while it was on (I've read in my search for an answer for this problem that doing that can help some issues?) and unplugging it while it was off and then restarting it
Continuously tried to reconnect to the SSID network
Tried to enter the printer's IP in my internet browser's address bar; nothing came up, since it isn't connected
Turned off the wireless in the Wireless Settings menu, then turned it back on a half hour later, then waited to see if it'd reconnect
Reset printer drivers
Updated my ePrint software and installed all availible HP product updates
I've printed out the Network Test multiple times, and each time it's said everything passes, but that I've had numerous disconnects and that the connection is low
I even moved a music player that was near my printer, thinking that maybe the metal was messing up the connection somehow (last resort)
Changed the empty ink cartridge (last resort)
I haven't tried restarting my computer, but I don't think that's what the problem is. My roommate's computer can't connect to the printer either (she's running OSX 10.8).
I have the printer in my Printer list twice in two seperate ways: One version is connected through the IP address, and the other is an option that appeared once while I was connected to the SSID network and just became a new printer. That one includes the scan option, but the first one doesn't. When I try to print something, the first printer says "Network host [IP ADDRESS] is busy.. will retry in 5/10/20/etc seconds..." and the second printer says "Printer offline."
The same thing happens with both whether I've gone into my Airport settings in the upper right and connected to the printer as a Device or not. It still shows my printer as a Device that I connect to, even though the printer itself says it's offline.
Additional informatiom:
I don't have a USB cable for my printer, so I haven't tried that yet.
At one point during all the re-setting and restarting, I saw the printer's IP address appear in the Wireless menu as the connected network, but it still wouldn't print at that time.
That's all the information I can think of in relation to this issue; if anyone needs to know anything else, let me know. Hopefully it's enough, and hopefully someone will have the answer to my problem.
Sorry if anything is confusing or frantic; I've been dealing with this for a few days now, and I've searched all the help forums I could and looked through as many HP documents as possible, but nothing has changed the situation. This is basically my last hope.

After just switching from Cable to FIOS, I had to get my HP C4580 wireless printer back online too.
What was important was that the Printer settings knew about the IP and port changes that are impacted from the new network and router from Verizon. How to do this is in your HP printer network setup manual and handled by their driver when its installed on the PC.
If all fails, try hooking up to your printer via an USB cable and start from there. Make sure everything works wired before trying again from a wireless setup. Youll end up with two printers in your Windows Printer choices, one for USB and one for Wireless, but thats no big deal.
Tmas

Printer won't connect to laptop - Please help asap!

I've connected my printer to the internet, done all the steps that the useless desktop dr or whatever it's called has told me to do, (including uninstalling/reinstalling various different things, restarted printer and laptop, turned router on and off etc) and it still won't connect!
I've got my final deadline in a week and I honestly have no idea what to do anymore, and since I can't actually find anywhere to contact HP on here, I'm begging anyone for some help?
I've set it as default, it's printing "test pages" with no problems, it just will not connect to the laptop (Dell, Windows).
Thank you

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

DW8 won't connect to server in Vista

Hi all,
Tearing my hair out trying to get my DW8 suite to run on my
new laptop running Windows Vista Home Premium. Used it for 3 years
on an XP machine with no problems.
It won't connect to remote server. Those buttons are greyed
out. Based on the messages I've read here, I've tried:
1) Run as Administrator
2) Compatibility with XP
3) Excluded it from Firewall
4) Turned off Firewall
5) Uninstalled and re-installed.
Am at my wits end and hope you can help. Thanks!
Nancy

maranagal posted in macromedia.dreamweaver
> Hi all,
>
> Tearing my hair out trying to get my DW8 suite to run on
my new
> laptop
Glad you sussed it out (subsequent follow up), put your hair
back in!
Don't forget to install the 8.02 patch if your install didn't
include
it.
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dw8
Most common problem I've seen in here is that 8.0 can forget
your FTP
login criteria. The patch cured that, I think.
Mark A. Boyd
Keep-On-Learnin' :)

Won't Connect to Server

I have an iMac lab running 10.3 in my school. Two of the computers when the students try to connect to server won't let them. They can connect to server on other computers but not these two. Any ideas why?
Thanks,
Jenny

Are you running Mac OS X Server setup with Home directories on the Server, or just casual File Sharing off one Mac designated as the server?
Are all the Macs set up to get their IP addresses via DHCP?
Are the Macs that can't connect trying to use an address like 169.254.xxx.yyy ?
All wired to the same Router? Any using wireless connections instead of wired?
Can you use Network Utility to "Ping" the Router?
Can you use Network Utility to "Ping" the server?
Do you get an error message or just times out? What error message?

Eprintcenter printer won't connect to server

Similar Messages

Maybe you are looking for