EPub validation errors for chapters starting with an anchored image

I am generating an epub file using InDesign CS5.5.
I have set up a TOC and selected it during the epub export. It has one level based on my paragraph style “Caption” and works perfectly when I test the ePub file on iBooks.
Most chapters start with an image, followed by a caption (in paragraph style “Caption”, the same as I’m using to generate the TOC) underneath.
Images are anchored (using the blue box) to this caption in the Indesign file.
I have forced a page break before the image in the export to epub to ensure the image comes at the top of the page.
So far so good. All looks great and everything, including TOC, works perfectly in iBooks on my iPad and in Adobe Digital Editions.
However, my file will not validate because the TOC markers in the chapters which begin with the anchored image are missing – even though the TOC works perfectly as I’ve mentioned earlier.
As far as I can make out from the HTML, the anchored image is overriding the TOC marker, hence the error.
I’ve manually edited the chapter files concerned for now as I’m under time pressure to finish the job, but I’d really appreciate any advice on how to set up my InDesign file to avoid this error in the first place for future books.
(I’ve tried anchoring the image to a space before the caption text, and anchoring it to a soft and hard return but no joy. I could start the page with the caption followed by the image and force the break after the image instead of before it to solve the problem but my client wants the image at the start of the chapter and I agree it looks much better that way round…….)
Any suggestions much appreciated.
I can post the HTML code the Indesign export is generating and the edited code if that helps at all.

Hi Steve,
Thanks for your quick response.
I have Version 7.5 of InDesign CS5.5. Not sure if that includes the patch? If not, where would I get the patch from?
On the error, here are a couple of examples from the first 2 chapters - it occurs in every chapter that begins with an image:
ERROR         OEBPS/toc.ncx         23       62       'toc_marker-2': fragment identifier is not defined in 'OEBPS/Inspirational_Love_V1-1.html'
ERROR         OEBPS/toc.ncx         29       62       'toc_marker-3': fragment identifier is not defined in 'OEBPS/Inspirational_Love_V1-2.html'
Also, here's an example of the original HTML generated by the export which is missing the TOC marker:
<div class="Basic-Text-Frame">
<p class="para-style-override-1"> <img
src="images/VX61_Fogra_USM_fmt.jpeg" alt="VX61_Fogra_USM.jpg"
height="467" width="1400" /> </p>
<p class="Caption">Refuge Cove, Wilson's Promontory, Vic</p>
And here's the corrected code which validates:
<div class="Basic-Text-Frame">
<p class="para-style-override-1"> <img
src="images/VX61_Fogra_USM_opt.jpeg" alt="VX61_Fogra_USM.jpg"
height="467" width="1400" /> </p>
<p id="toc_marker-4" class="Caption">Refuge Cove, Wilson’s
Promontory, Vic</p>
Thanks for your help.

Similar Messages

  • Validation error for tag cfloop

    Hi All,
    Complete newbie to CF here.  I've inherited (or bought) an online business which has its site written in CF.  I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
    I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be.  For some reason, I have a few problems with the site running locally.  The first error I'm getting is a Attribute validation error for tag cfloop.
    Basically, index.cfm has this bit of code in it:
    <cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
        <cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
    </cfinvoke>
    Ok, easy enough.  Anyway, there's a call down the page to:
    <cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
    Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
    <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    Bam, that's where the error occurs.  "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
    What???  The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
    The other interesting thing is that this works on production, NO PROBLEM!!!  WTF?  How can it work on production but not locally.
    The only thing I'm starting to think is:
    a)  I've missed a setting somewhere in CF or
    b)  I'm running Apache as compared to IIS or
    c)  I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
    Should B or C be causing THAT type of problem??
    Thanks,
    Matt

    I'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes.  The following is only snippets of the code, but they are the relavant snippets.  Other stored procs work.  The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'.  I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code.  As previously stated, there are other stored procs which are running fine.
    datasets.cfc
        <cffunction name="storedProcedure">
            <cfargument name="storedProcedure" required="Yes" type="string">
            <cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
                          datasource = "#REQUEST.DSN_NAME#"
                          username   = "#REQUEST.DSN_USER#"
                          password   = "#REQUEST.DSN_PASS#"
                          returncode = "Yes">
                <cfprocresult name="storedProcedure" resultset="1">
            </cfstoredproc>
            <cfreturn storedProcedure>
        </cffunction>
    application.cfm
        <!--- DATA SOURCE VARIABLES --->
        <cfset DSN_NAME = "boutiqueWineriesTest">
        <cfset DSN_USER = "coldfusion">
        <cfset DSN_PASS = "coldfusion">
    index.cfm
    <cfobject component="#COMP_REF#.datasets" name="datasets">
    <cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
        <cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
    </cfinvoke>
    <cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
    displayFeaturedWineries.cfm
             <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    Attribute validation error for tag cfloop.
    The value of the attribute query, which is currently  getFeaturedWineries_qry, is invalid.                                                                                  The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm:  line 33
    Called from C:\apps\iishome\index.cfm: line 399
    Called from C:\apps\iishome\index.cfm: line 79
    Called from C:\apps\iishome\index.cfm: line 1
    31 :      <tr>
    32 :           <td width="626" colspan="3" class="productCenter_bg2">
    33 :          <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    34 :              <div class="productCennews">
    35 :                  <table border="0" cellspacing="0" cellpadding="0">

  • Need help... Context validation error for tag cfscript.

    Code:
        <cffunction name="computeHash" access="public" returntype="String">
          <cfargument name="password" type="string" />
          <cfargument name="salt" type="string" />
          <cfargument name="iterations" type="numeric" required="false" default="1024" />
          <cfargument name="algorithm" type="string" required="false" default="SHA512" />
          <cfscript>
            var hashed = '';
            var i = 1;
            hashed = hash( password & salt, arguments.algorithm, 'UTF-8' );
            for (i = 1; i <= iterations; i++) {
              hashed = hash( hashed & salt, arguments.algorithm, 'UTF-8' );
            return hashed;
          </cfscript>
        </cffunction>
    Error on web app:
    Context  validation error for tag cfscript.
    The start tag must have a matching  end tag. An explicit end tag can be provided by adding </cfscript>. If the  body of the tag is empty you can use the shortcut <cfscript .../>. The CFML compiler was processing:
    a cfscript tag beginning on line 11, column 12.
    a cfscript tag beginning on line 11, column 12.
    The  error occurred in xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\salty.cfc: line  11
    9 :        <cfargument name="iterations" type="numeric" required="false" default="1024" />
    10 :        <cfargument name="algorithm" type="string" required="false" default="SHA512" />
    11 :        <cfscript>
    12 :           var hashed = '';
    13 :           var i = 1;
    I am completely lost on why it's fumbling with why it says there's no closing tag.  Help!!!!
    Thanks

    What's on lines 1-7 of that file?
    That code compiles fine for me on CF8 & CF9, so that's not where the error is.
    You're not trying to compile it on any earlier version of CF than CF8 are you?  The < and ++ operators are not valid prior to CF8.  CFMX7 might see the < as a stray angle bracket, and get confused.  I don't have CFMX7 running here to test the exact error that would produce, sorry.
    Adam

  • Epub validation error: element "ol" not allowed here; expected element "li"

    How do i fix this?
    and why is the InDesign exporting incorrect html for it's fixed layout epubs? Is this a new issue with the recent update?

    Which version of InDesign are you using?
    Validation errors have been reduced with the latest update of ID CC 2014.2 last week.

  • Order of the validation error for mandatory properties

    Hi,
    I have created mandatory Properties in KM Configuration.I have configured in such a way that the properties are shown while uploading a file.Now when I upload a file without filling the properties it shows the validation error for the properties but it is not shown in the order of the properties mentioned in the property Groups.
    Everytime the error is shown in a random order.
    Please advise me whether I am missing something in the configuration.
    Thanks in advance
    Sowjanya.

    Hi,
    is it possible, that someone inserted data with a different GC as parameter than your actual group currency is?
    otherwise: I had the same problem, but I actually don't know the reason. I changed the validation rule:
    before i had: VAL_YTD( write-offs cap. assets BS ) = VAL_YTD( write-offs PL)
    now i have: ABS( VAL_YTD( write-offs cap. assets BS ) ) = ABS( VAL_YTD( write-offs PL) )
    ABS = absolute value (no sign, only values).
    You could also do it like that: ABS( VAL_YTD( write-offs cap. assets BS  ) ) - ABS( VAL_YTD( write-offs PL) ) = 0
    PS: To have the amount 0 in a validation rule is a restricted perspective. Never forget that!
    Not only for the validation - it is always absolutely important to make sure which perspective you have choosen. Check the parameters, check the rules, the selections etc.
    BR

  • Attribute validation error for tag CFQUERY

    I have a CF application that's running fine on a shared host. I now have a VPS running version of CF 9. When I try to use this on the VPS, I get the following error:
    Attribute validation error for tag CFQUERY.
    The value of the attribute datasource, which is currently '', is invalid.
    The datasource is being set in application.cfc, and again works just fine in the shared environment.
    The only differences is the shared is running on Windows, and the VPS is Linux. Also, the Windows is running version 9,0,1,274733 and the Linux is 9,0,0,251028
    Any help would be greatly appreciated.

    bbholdem wrote:
    I have a CF application that's running fine on a shared host. I now have a VPS running version of CF 9. When I try to use this on the VPS, I get the following error:
    Attribute validation error for tag CFQUERY.
    The value of the attribute datasource, which is currently '', is invalid.
    The cause of the error is obvious. Somewhere in your application, the cfquery tag is used as follows, with an empty string as datasource:
    <cfquery datasource="">
    </cfquery>
    That is a mistake. The error message should tell you where that occurs.

  • In an iPhoto slideshow how do I get it to start with the first image?

    It seems as if the slideshow starts with a ramdom image.
    Is there any way to have an i:Photo slieshow start with the first one in an album?

    When playing a slideshow directly from an album the show will start with the first photo in the album unless another photo is selected.  In that case the slideshow will begin with the selected photo.
    There's also an setting pane for the album slideshow with an option to randomize the photos with each playing.
    Make sure the Shuffle checkbox is not selected.

  • Validation error for non-null throws false error condition

    I am trying to perform a DML (INSERT) with a form element (textbox) that has been disabled on the form.
    The objective is to allow the user to:
    1) disable a form element using javascript when a radio element is selected - works OK using an onclick event
    2) user clicks a button to ENTER (perform a INSERT DML) - here the validation throws an error but I have enabled the previously disabled form element and I have used $x_Value() to input a value into the form element by onsubmit event on button.
    If I remove the validation error trap the DML saves the appropriate value.
    I can create two buttons and it works:
    1 button to enable fields that were previously disabled
    2 button to perform DML. (works if after button 1 I set focus on any form field with my mouse.)
    Any help would be appreciated.
    marshall

    Knight,
    Thanks for your interest in helping.
    I am trying not to create a situation w/bugs and such. I think I can devise a work around but I would like a more "correct" solution. ;-)
    To explain what I am doing I have a form that a person can use to enter a complaint. The person can give their last - middle - first name but they can also decide to be anonymous. If anonymous they click checkbox. Onclick of checkbox I fire javascript to disable name fields and place "Anonymous" in the last_name disabled field. The user can enter other data and when the user clicks ENTER I want to insert into the DB but the validation error trap of APEX sees a disabled field as a null. I want to place "Anonymous" in the last name field and then save the record with other data besides name.
    To add to it - I can create two buttons 1-button enables and 2-button inserts and the same code works if I touch( give focus) to a field in between enabling and inserting into the DB
    Does that help explain better.
    Thanks again - hope you or someone can help - best regards.

  • Error, in Getting started with Labview. Chapter 3, part 4.

    Hi.
    Still struggling on, trying to find the time to work through the "Getting Started with LabVIEW" document.
    Only 19 days left to go, and I'm still only in chapter 3!...
    Right.  In the "Saving Data When Prompted by a User" exersise, part 4...
    4.   Right-click the Signals input of the Write To Measurement File
          Express VI and select Insert Input/Output from the shortcut menu to
          insert the Comment input.
    Problem is, that option is greyed out, so not available!...
    I did what the instructions said, I right clicked on the "Signals" input, and it doesnt do what it says on the tin!
    Any pointers?   Please don't mention search the help, I've crashed the entire LV environment 3 times now, trying to search for something in there.  It's OK if it finds someting, but it seems to bomb at times, when there is some ambiguity when searching.
    Also, I won't be able to do anyting with any replies for a day or two, as I have to go up country to a customer, and mess about with hot oil, high volts, and lots of RF.  It never ends.   (I've still got the day job to do, while trying to fight my way through this "evaluation".   30 days of "Use" would be better, than 30 calendar days for some of us.)
    Regards.
    Dave Baxter.
    Technical Manager: AR-UK Ltd.
    AR United Kingdom
    OK... Who let the smoke out?

    Hi Dennis, and everyone else..
    That is not how it looks when first dropped on the BD.  On my machine, it is partialy expanded by default, after you clear the Configure dialog that pops up ocupying most of the screen.
    Again, if it makes a difference to the way the Right Click shortcut menu works, it should be documented in the Getting Started document, especialy as it seems to be a critical point.
    OK, explain this...
    I've just rubbed out the save to file VI, cleaned up the broken wires etc, and then planted a new one on the BD.   Once I cleared the Configure dialog that covers up most of the screen before you see it the first time, the VI was partialy expanded.  I forget the exact list, but "Signals" was not at the top.
    I did *EXACTLY* the same again, deleted it, cleaned up, and then planted a fresh new one.   That DID appear that time with nothing but the "Signals" item showing, and two down caretts below that, indicating more items.
    So......
    Why the different behaviour each time, on the same BD, in the same session.   Some underlying working data not being correctly initialised when invoked?  Of course, that never happens, right? ('C' programmes eh?)
    Trying some more, it seems the behaviour loosley depends on just how close to the edge of the While loop grey border you place it.   Odd.   I have a 1280x800 screen to play with, and a 1280x1024 second screen I use for the Getting Started document.  That is the absolute maximum I can have, due to hardware limits.
    I also find, that if you fully expand the "Write to Measurement File" VI block, then fully collapse it, then expand it again, all the items in that list have changed places!  Why?
    I had noticed earlier that there is no uniformity in the layout of even the items common to many if not all VI blocks (error in, and error out to name but two) Sometimes one is above the other, sometimes the other way round, sometimes they are not even ajacent to each other.   Has that been done as a source of minor ammusement or something?
    Talking to another colegue here, who just wandered in to see how I was getting on with this.  Seems he also has tried the introductory entry into LV (V8.something) in the past.  But he too, found too many things that behaved differently from one time to another, so abandoned it as a lost cause, then decided to learn how to use Visual Basic with NI-GPIB IO instead.   Not without issues either he said, but at least it all behaves exactly the same, each and every time.
    End of the day now...
    Regards.
    Dave B.
    OK... Who let the smoke out?

  • RSA decryption Error: Data must start with zero

    Because of some reasons, I tried to use RSA as a block cipher to encrypt/decrypt a large file. When I debug my program, there some errors are shown as below:
    javax.crypto.BadPaddingException: Data must start with zero
         at sun.security.rsa.RSAPadding.unpadV15(Unknown Source)
         at sun.security.rsa.RSAPadding.unpad(Unknown Source)
         at com.sun.crypto.provider.RSACipher.doFinal(RSACipher.java:356)
         at com.sun.crypto.provider.RSACipher.engineDoFinal(RSACipher.java:394)
         at javax.crypto.Cipher.doFinal(Cipher.java:2299)
         at RSA.RRSSA.main(RRSSA.java:114)
    From breakpoint, I think the problem is the decrypt operation, and Cipher.doFinal() can not be operated correctly.
    I searched this problem from google, many people met the same problem with me, but most of them didn't got an answer.
    The source code is :
    Key generation:
    package RSA;
    import java.io.FileOutputStream;
    import java.io.ObjectOutputStream;
    import java.security.KeyPair;
    import java.security.KeyPairGenerator;
    import java.security.PrivateKey;
    import java.security.PublicKey;
    import java.util.logging.Level;
    import java.util.logging.Logger;
    public class GenKey {
          * @param args
                     * @author tang
         public static void main(String[] args) {
              // TODO Auto-generated method stub
                 try {
                      KeyPairGenerator KPG = KeyPairGenerator.getInstance("RSA");
                      KPG.initialize(1024);
                      KeyPair KP=KPG.genKeyPair();
                      PublicKey pbKey=KP.getPublic();
                      PrivateKey prKey=KP.getPrivate();
                      //byte[] publickey = decryptBASE64(pbKey);
                      //save public key
                      FileOutputStream out=new FileOutputStream("RSAPublic.dat");
                      ObjectOutputStream fileOut=new ObjectOutputStream(out);
                      fileOut.writeObject(pbKey);
                      //save private key
                          FileOutputStream outPrivate=new FileOutputStream("RSAPrivate.dat");
                      ObjectOutputStream privateOut=new ObjectOutputStream(outPrivate);
                                 privateOut.writeObject(prKey)
         }Encrypte / Decrypt
    package RSA;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.ObjectInputStream;
    import java.security.Key;
    import java.util.logging.Level;
    import java.util.logging.Logger;
    import javax.crypto.Cipher;
    //import sun.misc.BASE64Decoder;
    //import sun.misc.BASE64Encoder;
    public class RRSSA {
          * @param args
         public static void main(String[] argv) {
              // TODO Auto-generated method stub
                //File used to encrypt/decrypt
                 String dataFileName = argv[0];
                 //encrypt/decrypt: operation mode
                 String opMode = argv[1];
                 String keyFileName = null;
                 //Key file
                 if (opMode.equalsIgnoreCase("encrypt")) {
                 keyFileName = "RSAPublic.dat";
                 } else {
                 keyFileName = "RSAPrivate.dat";
                 try {
                 FileInputStream keyFIS = new FileInputStream(keyFileName);
                 ObjectInputStream OIS = new ObjectInputStream(keyFIS);
                 Key key = (Key) OIS.readObject();
                 Cipher cp = Cipher.getInstance("RSA/ECB/PKCS1Padding");//
                 if (opMode.equalsIgnoreCase("encrypt")) {
                 cp.init(Cipher.ENCRYPT_MODE, key);
                 } else if (opMode.equalsIgnoreCase("decrypt")) {
                 cp.init(Cipher.DECRYPT_MODE, key);
                 } else {
                 return;
                 FileInputStream dataFIS = new FileInputStream(dataFileName);
                 int size = dataFIS.available();
                 byte[] encryptByte = new byte[size];
                 dataFIS.read(encryptByte);
                 if (opMode.equalsIgnoreCase("encrypt")) {
                 FileOutputStream FOS = new FileOutputStream("cipher.txt");
                 //RSA Block size
                 //int blockSize = cp.getBlockSize();
                 int blockSize = 64 ;
                 int outputBlockSize = cp.getOutputSize(encryptByte.length);
                 /*if (blockSize == 0)
                      System.out.println("BLOCK SIZE ERROR!");       
                 }else
                 int leavedSize = encryptByte.length % blockSize;
                 int blocksNum = leavedSize == 0 ? encryptByte.length / blockSize
                 : encryptByte.length / blockSize + 1;
                 byte[] cipherData = new byte[outputBlockSize*blocksNum];
                 //encrypt each block
                 for (int i = 0; i < blocksNum; i++) {
                 if ((encryptByte.length - i * blockSize) > blockSize) {
                 cp.doFinal(encryptByte, i * blockSize, blockSize, cipherData, i * outputBlockSize);
                 } else {
                 cp.doFinal(encryptByte, i * blockSize, encryptByte.length - i * blockSize, cipherData, i * outputBlockSize);
                 //byte[] cipherData = cp.doFinal(encryptByte);
                 //BASE64Encoder encoder = new BASE64Encoder();
                 //String encryptedData = encoder.encode(cipherData);
                 //cipherData = encryptedData.getBytes();
                 FOS.write(cipherData);
                 FOS.close();
                 } else {
                FileOutputStream FOS = new FileOutputStream("plaintext.txt");
                 //int blockSize = cp.getBlockSize();
                 int blockSize = 64;
                 //int j = 0;
                 //BASE64Decoder decoder = new BASE64Decoder();
                 //String encryptedData = convert(encryptByte);
                 //encryptByte = decoder.decodeBuffer(encryptedData);
                 int outputBlockSize = cp.getOutputSize(encryptByte.length);
                 int leavedSize = encryptByte.length % blockSize;
                 int blocksNum = leavedSize == 0 ? encryptByte.length / blockSize
                           : encryptByte.length / blockSize + 1;
                 byte[] plaintextData = new byte[outputBlockSize*blocksNum];
                 for (int j = 0; j < blocksNum; j++) {
                 if ((encryptByte.length - j * blockSize) > blockSize) {
                      cp.doFinal(encryptByte, j * blockSize, blockSize, plaintextData, j * outputBlockSize);
                      } else {
                      cp.doFinal(encryptByte, j * blockSize, encryptByte.length - j * blockSize, plaintextData, j * outputBlockSize);
                 FOS.write(plaintextData);
                 //FOS.write(cp.doFinal(encryptByte));
                 FOS.close();
    }Edited by: sabre150 on Aug 3, 2012 6:43 AM
    Moderator action : added [ code] tags so as to make the code readable. Please do this yourself in the future.
    Edited by: 949003 on 2012-8-3 上午5:31

    1) Why are you not closing the streams when writing the keys to the file?
    2) Each block of RSA encrypted data has size equal to the key modulus (in bytes). This means that for a key size of 1024 bits you need to read 128 bytes and not 64 bytes at a time when decrypting ( this is probably the cause of your 'Data must start with zero exception'). Since the input block size depends on the key modulus you cannot hard code this. Note - PKCS1 padding has at least 11 bytes of padding so on encrypting one can process a maximum of the key modulus in bytes less 11. Currently you have hard coded the encryption block at 64 bytes which is OK for your 1024 bits keys but will fail for keys of modulus less than about 936 bits.
    3) int size = dataFIS.available(); is not a reliable way to get the size of an input stream. If you check the Javadoc for InputStream.available() you will see that it returns the number of bytes that can be read without blocking and not the stream size.
    4) InputStream.read(byte[]) does not guarantee to read all the bytes and returns the number of bytes actually read. This means that your code to read the content of the file into an array may fail. Again check the Javadoc. To be safe you should used DataInputStream.readFully() to read a block of bytes.
    5) Reading the whole of the cleartext or ciphertext file into memory does not scale and with very large files you will run out of memory. There is no need to do this since you can use a "read a block, write the transformed block" approach.
    RSA is a very very very slow algorithm and it is not normal to encrypt the whole of a file using it. The standard approach is to perform the encryption of the file content using a symmetric algorithm such as AES using a random session key and use RSA to encrypt the session key. One then writes to the ciphertext file the RSA encrypted session key followed by the symmetric encrypted data. To make it more secure one should actually follow the extended procedure outlined in section 13.6 of Practical Cryptography by Ferguson and Schneier.

  • Validation error for af:selectInputDate

    I am using af:selectInputDate with af:convertDateTime as follows:
    <af:selectInputDate styleClass="date" id="selectInputDate1"
         partialTriggers="myCombo"
         value="#{myBackingBean.myDate}"
         disabled="#{myBackingBean.dateDisable}">
         <af:convertDateTime pattern="MM/dd/yyyy" id="convertDateTime patternED"/>
         </af:selectInputDate>
    When user enters an invalid date, the validation error message comes in a popup, which is fine. But the same date component when used in another panel of the same JSP behaves differently. In some cases validation error message is displayed on the same page, and this moves the other components away. In some cases e.g. if we enter 20031 instead of 2003 for year, it saves the value as 5569. If there is a letter in the date it is just ignored. (In the earlier panel all this is shown as error in the popup) .
    I'd like the popup behaviour always. Pls help

    I had same problem I resolved it by adding id of my InputComboboxField in its won PartialTriggers : component's Id
    in your component property
    Id:employeeId
    add same
    PartialTriggers:employeeId , and it will jsut disapper......
    Deepa Pathre
    Edited by: Deepa on 2/06/2011 20:28

  • WRX Error-For consumables posting with Acc Assignment K

    We are doing a GR for consumables posting with account assignment category K (Cost centre).  However, while trying to post the document, system issues a message that "Account determination for WRX cannot be determined". 
    Why this error is coming for consumables posting for a cost centre ?  Is it standard or am I missing any configuration ?

    Hi,
    When you are booking a Consumption to a Cost Center at the time of GR, the entry whihc is passed is
    Consupmtion A/c Dr
    GR/IR Account Cr.
    At the time of IR, the entry will be
    GR/IR Account Dr.
    Vendor A/c Cr.
    So you will have to do the settings for the WRX for GR/IR account in OBYC.
    Regards,
    Amit
    Edited by: amit kulkarni on Dec 2, 2009 5:19 PM

  • HWS file error when not starting with Ch 0

    Hello,
    I used the "niScope EX Save to File - HWS Low Level - Single Channel Stream.vi" as my starting point and added 8 channels for a 5105 card. Although this is a complex Queue-based vi, it works fine as long as my RAID is fast enough.
    However, we have need to take data from channels 4 to 7 and not start with Ch 0. When I do this, my LabVIEW HWS reader does not see any data, nor does the MATLAB code I have written to read our HWS files.
    Looking at the file in HDFView, I see that the data starts in vector0 and not vector1, as when I record Channels 0 to 3.
    Perhaps I need to use the HDF5 LabVIEW code to force the writing to a different location in the HDF file?
    Thanks for your help.

    Hello,
    I was out of the office Mon. and Tues. I took out a section that just collects one 5105 card in a steaming, continuous collect mode. This is part of a much bigger VI and I included the “Helper Aps” folder that has all the sub-VIs for that larger app. There are more sub-VIs than you need for “5105 Cont Collect.vi”, but it should run once you tell it where the sub-VIs are. Included is a quick-look reader I use to look at the data.
    The data file Ch_0_to_3_5105-0.hws can be read, but the Ch_4_to_7_5105-0.hws file cannot.
    Thank you for your help.
    Attachments:
    5105_Cont_Collect.zip ‏3267 KB

  • Validation Error in complaint search with changed on field.

    Hi all,
    I have added changed on field in complaint search screen of IC agent role, while searching for a complaint using changed on field, data as last month. We are getting an error message saying "Date M+-1 is invalid". Which I am suspecting as an validation error. Please also refer if any notes.
    FYR, Error is attached. Fast responses are highly appreciated.
    Thanks,
    Vivek.

    Hi Vivek,
      Your intention is need  to find the error validation?
      If that could be the case,then we can check from where that error message is coming!!
    1. Add a parameter in su3 BSPWD_USER_LEVEL and value is 8. If you go to web ui and place the cursor in error message, it will display the message class and message number.
    2. Then go to SE91 and put the class and number, check where used list. So that u can easily find the code logic beyond that field validation.
    Reply if u need more!!!
    Regards,
    Sugan.

  • I cant search for artists starting with a

    When im trying to search for music in itunes version 11, an i try to type an artists starting with a all i get is the beach ball spinning and nothing happens

    To the left of the Search icon there is a list icon. Tap on it.

Maybe you are looking for