Equivalent of "openssl smime -sign" in C# and Compact Framework

Hi,
I try to sign a XML with a certificate in C# for a mobile application. So, I use
Compact Framework 3.5. For the moment, I have used an OpenSSL command like this:
openssl smime -sign -in myXML.xml -out myXMLSigned.mim -passin pass:test -binary -nodetach -inkey certificat.priv.pem -signer
certificat.pub.pem
Unfortunately, I think I’ve found an equivalent in C# Framework (by using the function of PKCS like
SignedCms, CmsSigner, …) but no in Compact Framework. I’ve already tried to manipulate CryptoAPI with no success.
What is the equivalent of this
OpenSSL command?
Many thanks in advance for your assistance.
Best regards.

Might try them over here.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsmobiledev
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Windows CE 5.0 and Compact Framework 2.0

We need some help with develop and deploy applications develop with .NET
1) Are Olite 10gR2 certified with Windows CE 5.0?
PDA UNITECH PA960 Windows CE 5.0, 51856 Kb de RAM y 2 flash:
Disk0nChip M_Systems de 20 Mb
PCMCIA/Compact Flash Device de 488.74 Mb
2) Exists a .NET (ADO.NET) provider that work with Olite and Oracle for Compact Framework 2.0
Thanks in advance,
Diego.

Hi,
Windows CE 5 is supported in current release of Oracle Lite (from 10.2.0.2 version I think).
The .Net provider is part of the MDK (mobile development kit) which can be installed as part of the Oracle Lite server. If you need the CF2 provider, you have to apply patch 5889660 from metalink, which installs the CF2 provider to your MDK directory (only CF1 provider is included in standard OLite installation set). The provider file is Oracle.DataAccess.Lite_wce.dll...

Orale Lite and Compact Framework

We have a well developed PocketPC/Compact Framework application using SQL Server, SQL Server CE, and DotNet C-Sharp. We now have a requirement to use Oracle on the back-end. We could replicate the MS SQL Backend database to Oracle and delete the MS SQL Data. This is far from ideal. We would like to abandon Microsoft SQL entirely and use Oracle on the backend talking to Oracle Lite on the Pocket PC.
Our present application manages database access on the Pocket PC and synchronization through the internet to the central MS SQL server database. Can this this be done with Compact framework, Oracle and Oracle Lite? We do not want to rewrite the Pocket PC application in Java.

Yes you can accomplish the syncronization from Oracle Lite to an Oracle Database (Standard or Enterprise).
Oracle Lite provides the middle tier (Mobile Server) for synchronization.
Download the Documentation and look at the OracleÂ® Database Lite Developer's Guide 10g (10.0.0)
Part No. B13788-01
From Chapter 6:
Oracle Database Lite ADO.NET provider for Microsoft
.NET and Microsoft .NET Compact Framework. The Oracle Database Lite ADO.NET provider resides in the Oracle.DataAccess.Lite namespace.
There is also a demo available once you install the product.

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

Activate https webmail using openssl self-signed cert

Dear expert,
Anyone can give me guidance on how to create and activate https webmail, pops using openssl self-signed cert
thanks

Thanks jay for your rocket respond
I make it work after following your guide and follow this link:
http://swforum.sun.com/jive/thread.jspa?forumID=16&threadID=52981
Basically the csr created in mail startconsole, I self signed using openssl.
One more question, can I use the same cert to enable ssl in ldap encryption tab in ldap console.
thanks

Activate SSL with OpenSSL Self-Signed Cert

Dear Expert,
Anyone can give me guidance on how to activate and create ssl cert in Java IM using openssl self-signed cert.
thanks

Here how I make it work. Some of the tips is from jay in this forum
Instant Messaging with SSL
Let say I have Messaging, Directory, IM server in 1 box.
Let's create a cert
# cd /etc/opt/SUNWiim/default/config/
a) Sun [TM] ONE Messaging Server 6.1 and Sun [TM] ONE Directory Server 5.2 were installed from JES2 on the same box
b) The server_root directory for Directory Server is the default: /var/opt/mps/serverroot
c) The server_root directory for Messaging Server is also the default: /opt/SUNWmsgsr
1. Login to the console and do a Certificate Request
a) cd /var/opt/mps/serverroot
b) ./startconsole &
c) Login to the main console as "cn=Directory Manager"
d) Select and open the "Messaging Server" console
e) Highlight the tab called "Tasks" at the top
f) Select "Manage Certificates"
g) Console will ask for a password for the security database. Please enter a password twice and make sure that you remember it. This will create the following two files under "/var/opt/mps/serverroot/alias" directory:
-rw------- 1 mailsrv other 65536 Aug 12 13:57 msg-config-cert8.db
-rw------- 1 mailsrv other 32768 Aug 12 13:57 msg-config-key3.db
NOTE: Please make sure that:
- either the owner of the files is the messaging server user ( mailsrv in this case ),
-or the permission is appropriate for the mail server user to at least read it.
h) Once you reach the "Manage Certificate" window, please make a "Certificate Request" by filing up the appropriate questions
i) Once you are done, you get a CSR , which looks something like this:
-----BEGIN NEW CERTIFICATE REQUEST-----
MIIBszCCARwCAQAwczELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWE x
DzANBgNVBAcTBm5ld2FyazEMMAoGA1UEChMDc21pMQ0wCwYDVQQLEwRhdGFjMSEw
HwYDVQQ DExhwb3BleWUuYXRhYy5lYmF5LnN1bi5jb20wgZ8wDQYJKoZIhvcNAQEB
BQADgY0AMIGJAoGBALF eXVTFDj/1eONPzV/dAZ0dBKdstl+u+L/DTdw1sCXXOdNG
MzYeTUu9g/g0dXL/bniF31M0OkoW+6O 5mshySv/KXS9QcoPngSKS6wuL8kNlYKQR
Dw97WCS1uaqubAK/kir4hDmL7X9Rf29EFHDSFOWjeOJ /M7aqFWCfR5sTeSIFAgMB
AAGgADANBgkqhkiG9w0BAQQFAAOBgQCeYwptiL/j7Bcs0DtGYiOlMMs utezF1COC
4+wHt/p+LtQkvQWBoXisqN6YlGfZPXOCdUyA+RwU7BxjX9IQLP+9HLHfQyLzvCKb
boKKpjIc8Ci+tmibM5QkgTxu4L7yeCR/PiplgVPttHNT2Qr9cxHLLBvIO6N1GOE8
VBoq0pC5SA= =
-----END NEW CERTIFICATE REQUEST-----
Please maintain and preserve this CSR , since you will be sending it to the Certificate Authority ( CA ) so they can issue you a Certificate
# openssl genrsa -des3 -out ca.key 4096
# openssl req -new -x509 -days 3650 -key ca.key -out ca.crt
# openssl x509 -req -days 3650 -in file.csr -CA ca.crt -CAkey ca.key -set_serial 01 -out server-cert.crt
# cp -p /var/opt/mps/serverroot/alias/msg-config-key3.db key3.db
# cp -p /var/opt/mps/serverroot/alias/msg-config-cert8.db cert8.db
# cp -p /var/opt/mps/serverroot/alias/secmod.db .
# cat sslpassword.conf
Internal (Software) Token:password
# cat /etc/opt/SUNWiim/default/config/iim.conf
iim.comm.modules = "iim_server,iim_mux,iim_wd"
iim.smtpserver = "www.esuria.com.bn"
iim.instancedir = "/opt/SUNWiim"
iim.instancevardir = "/var/opt/SUNWiim/default"
iim.user = "root"
iim.group = "root"
iim.config.version = "1.1"
iim_ldap.host = "www.esuria.com.bn:389"
iim_ldap.searchbase = "o=esuria.com.bn,dc=esuria,dc=com,dc=bn"
iim_ldap.loginfilter = "(&(objectclass=inetorgperson)(uid={0}))"
iim_ldap.usergroupbyidsearchfilter = "(|(&(objectclass=groupofuniquenames)(dn={0
}))(&(objectclass=inetorgperson)(uid={0})))"
iim_ldap.usergroupbynamesearchfilter = "(|(&(objectclass=groupofuniquenames)(cn=
{0}))(&(objectclass=inetorgperson)(cn={0})))"
iim_ldap.allowwildcardinuid = "False"
iim_ldap.userclass = "inetOrgPerson"
iim_ldap.groupclass = "groupOfUniqueNames"
iim_ldap.groupbrowsefilter = "(objectclass=groupofuniquenames)"
iim_ldap.searchlimit = "40"
iim_ldap.userdisplay = "cn"
iim_ldap.groupdisplay = "cn"
iim_ldap.useruidattr = "uid"
iim_ldap.groupmemberattr = "uniquemember"
iim_ldap.usermailattr = "mail"
iim_ldap.resynctime = "720"
iim_ldap.usergroupbinddn = "cn=Directory Manager"
iim_ldap.usergroupbindcred = "password"
iim_ldap.useidentityadmin = "false"
iim.log.iim_server.severity = "INFO"
iim.log.iim_mux.severity = "ERROR"
iim.log.iim_wd.severity = "ERROR"
iim_server.domainname = "esuria.com.bn"
iim_server.useport = "True"
iim_server.port = "5269"
iim_server.usesslport = "False"
iim_server.sslport = "5223"
iim_server.enable = "True"
iim_server.clienttimeout = "15"
iim_server.usesso = "0"
iim.policy.modules = "iim_ldap"
iim.userprops.store = "file"
iim_mux.listenport = "www.esuria.com.bn:5222"
iim_mux.serverport = "www.esuria.com.bn:45222"
iim_mux.enable = "true"
iim_mux.numinstances = "2"
iim_mux.maxthreads = "10"
iim_mux.maxsessions = "1000"
iim_mux.usessl = "on"
iim_mux.secconfigdir = "/etc/opt/SUNWiim/default/config"
iim_mux.keydbprefix =
iim_mux.certdbprefix =
iim_mux.secmodfile = "secmod.db"
iim_mux.certnickname = "server-cert"
iim_mux.keystorepasswordfile = "sslpassword.conf"
iim_wd.enable = "true"
iim_wd.period = "300"
iim_wd.maxRetries = "10"
-open http://www.esuria.com.bn/im/en/im.jnlp
-click More Detail and enable Use SSL

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud Connection

Hi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit

Can not open iCloud on MBP? Want to PhotoShare. Set up in iPhone. Go to System Preferences, click on iCloud, get the message "move to iCloud", sign in, click on open iCloud", sign in again, and get only FindmyPhone?

Set up in iPhone. Go to System Preferences, click on iCloud, get the message "move to iCloud", sign in, click on open iCloud", sign in again, and get only FindmyPhone? Thus, when I go to Iphoto to set up photo sharing, it says I have to have icloud account-go to sys preferences--then i go through the loop again? Suggestions?

jgtown wrote:
Now I have to get my sign-in for mobileme to be the same as my sign-in for Itunes, etc. so I have only one Apple ID!
You're not going to be able to: you can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your ex-MobileMe email address (which is also an Apple ID) for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

Since recent updates, I have noticed that my apps close automatically when I am distracted. In some cases it is time consuming to sign back in and get back to the task I was doing. Is it possible to change a setting so the apps will stay open?

Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.

Did you have this problem before Restoring you iPad?
If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
If not then sounds like either something went array with the clean install or a hardware issue.
I know it's long winded but have you tired a clean install then downloading the apps again?
PJRS

I dont know why, but my Messages wont work on my Macbook any more. It has signed me out and will not allow me to sing back in. Any ideas?

Recently, my Messages app automatically signed me out and will not let me sign in again. I have tried everything. I can no longer send Imessages using my Macbook. How do I reset this thing?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

I open up yahoo and my messenger (no the full version) the one you can use in your mail. Now that I have opened I can't close it even though I hit sign out again and again. Please advise.

I am new to using a mac I have an older version. But I have used firefox on my pc before. I downloaded it and went to open messenger. Not the full downloaded messenger but the one you can access when in your mail on yahoo. It opened fine but now it won't close, even though I hit sign out again and again. I have tried force quite, uninstalling and reinstalling and still every time I sign into yahoo on firefox there is my messenger list open. For privacy issues I really need to be able to open and close it.

Known issue, our QA team working on it, See
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
you can follow the bug by opening bugzilla account and add yourself to CC list :)

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Have set Yahoo Mail as my mailto yet when I try to "send a link" I get a Yahoo sign in page and am then taken to my inbox. How can I get an email box to send the link?

I can't get Firefox to send either photos out of Picasa or "send a
link" using my Yahoo!Mail option. Have set Yahoo as my default
and have set Yahoo as my mailto using tools/apps. When I
use "send a link" I am sent to my Yahoo sign in page and it takes
me to my inbox. How can I get a blank email form to come up?

Typing in additional text seems to get the job done. This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest. Adding the extra text seems like a pointless step, but it does work.
Thanks.

HT2731 how can i sync my Apple ID to my iTunes sign-in? I have an old ID showing up in my iTunes sign-in window and cannot get rid of it to show my current Apple ID. I don't have the old password to the old ID in order to "manage" my account.

how can I sync my Apple ID to my iTunes store sign-in window? An old ID keeps showing in the iTunes sign-in window and I cannot get rid of it to show my current Apple ID. I don't have the password for the old ID in order to "manage" my account and make changes. Help. Thanks.

Did you create a new account or did you update your existing account with a new email address ? You can tap on the id in Settings > iTunes & App Stpre and sign out of it and you can then sign with the new/updated account.
If you did create a new account then your existing content will remain tied to your old account, so only that old account will be able to redownload that content and/or download updates to its apps. If you can't remember the password for it then you can try getting it reset via this page : http://iforgot.apple.com

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'm trying to accomplish is to do a "mail merge " ( as some classes i have as many as 150 attendees) for the document, digitally sign each one with my signature on the certificate and then e-mail it out to the respective attendees. can this be done? if so How?

This is the step that I took after inputting my signature.
On the right, after saving my document, I click "Get Others to Sign." I was confused because it says that it's powered by EchoSign. Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing. I tested this on myself - my signature is missing when they receive it.

Equivalent of "openssl smime -sign" in C# and Compact Framework

Similar Messages

Maybe you are looking for