I open up yahoo and my messenger (no the full version) the one you can use in your mail. Now that I have opened I can't close it even though I hit sign out again and again. Please advise.
I am new to using a mac I have an older version. But I have used firefox on my pc before. I downloaded it and went to open messenger. Not the full downloaded messenger but the one you can access when in your mail on yahoo. It opened fine but now it won't close, even though I hit sign out again and again. I have tried force quite, uninstalling and reinstalling and still every time I sign into yahoo on firefox there is my messenger list open. For privacy issues I really need to be able to open and close it.
Known issue, our QA team working on it, See
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
you can follow the bug by opening bugzilla account and add yourself to CC list :)
Similar Messages
-
Someone else set up my apps on my iPad. Now when I load find friends it shows him instead of me. I rebooted and re installed the app. How can I remove him even though I'm signed in under my apple account tnx
deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone. -
My special characters screen for pages is running in the background no matter what I do. It randomly pops up and then goes away. I can't close it even though I have closed pages and restarted my computer. How can I stop this.
Try trashing the .plist with CharacterViewer in its name in Home/Library/Preferences. To get to Home/Library you may need to hold the option key down while you do Finder > Go.
-
Remained signed in, even though I'm signed out. He...
Hello.
Sorry for opening a post with no doubt hundreds of others that have had the same problem. I just can't seem to get a working solution to which I have no resorted in making a post myself.
When I used "/showplaces" it says "You have 1 online endpoints:" And proceeds to give me details to my desktop. And to be double cautious, I use the "/remotelogout" command. Nothing appears so I am unsure if this command was executed properly or not.
I set myself to invisible and in my Tools -> Options -> General Settings. My "Show me as Away when I've been inactive for" is unchecked.
So after that, I click on Skype -> Sign Out. And with hopeful thoughts and praying that it worked, I check my relatives Skype in the next room and I am still appearing offline. This has been the case for over four hours without me signing back in with the hopes of it timing out.
What other steps can I take to resolve this problem? I've tried removing and re-installing skype with no avail.
These are my system specs:
Windows 7 Ultimate 64bit Service Pack 1
Skype Version: 7.0.85.100
Without sounding harsh, I have no interest in the current development or which direction the company is trying to go in. Nor am I interested in what is trying to be achieved. I simply just want to be able to logout and appear offline as to be expected.
Thank you in advance, if there's any more information that is required, please don't hesitate to ask!
Kind regards.
TLD:
When I sign invisible, it remains in the same status as I previously was. For example, if i set myself to Do not disturb. Then set myself to invisible, I still remain as Do not disturb. Same with Away and Online.
I cannot even set myself as Invisible.When you say you have changed your Apple ID, how did you change it? Did you maintain your existing Apple ID via Manage your Apple ID and EDIT it to a new email address, or did you set up a brand new Apple ID?
Cheers,
GB -
Hi all.
I need some help. I have recently installed a new Hard Drive in my Macbook and have re-installed Snow Leopard. Since doing so there have been a few things that haven't been quite the same.
1) Certain buttons decided they didnt want to work anymore. These being the Space Bar, the Tab key, all four arrow keys, Caps lock, Volume up, Eject, and a few others.
After putting up with this for a couple of weeks and looking at numerous forums, they all of a sudden came back to life (Hence why I'm actually able to type this message) THEN, they packed up again. Then started again, then packed again, and so on. They seem to have a mind of their own.
Please... does anyone know whats going on? Is it a hardware prob? Is it something to do with the way Ive installed the Hard Drive? Have I forgotten to do something?
2) Ever since my buttons initially came back to life, the "Do you want to restart you computer?" window keeps popping up every couple of minutes.
It's the window that says "Restart, Sleep, Cancel, Shut Down"
It's driving me insane and I can't help but think that the two probs are related.
If anyone out there has any ideas at all, they would be most welcome.
Many thanks in advance
MadDogSnapsHave you tried reinstalling the original drive? Same symptoms with it?
-
HHow do I change the email to my apple id when I don't remember security questions and its a fake email?
Which email address are you trying to change ?
You won't be able to change the rescue email address until you can answer your security questions, if you can't remember your answers and gave a fake email address for it then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form to contact Support : https://www.apple.com/emea/support/itunes/contact.html
When they've been reset you can then change your rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID
If it's the primary email address that you are trying to change : Change your Apple ID - Apple Support -
What if the I-Phone states it is disabled connect to iTunes and when you don't have a computer available that is sync with phone, but are using a different computer. You can't trust the computer from your phone because it is locked. How do I gain access.
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
Why am I no longr able to sign in to my Yahoo mail now that I have updated with IOS6?
Why am I no longer able to sign in to Yahoo mail after updating Ipad2 to IOS6?
I'm still plugging away at this one.
Here's what I discovered. If I log onto the LiveBox's admin interface (by ethernet) and enable WPA encryption the PowerBook will ask for the WPA password when I try to log on via Airport, when I enter the password it then says "this network uses access control please contact your administrator". So I go back the LiveBox admin screen and I manually add the PowerBook's MAC address as a permitted user. Then I try Airport again. This time it asks me the password as before then pauses for 15 seconds and says "there was an error joining the network".
So now I know that the Mac is talking to the router. I know it is getting past the password stage (if I have one set), it seems to be getting past the MAC filtering stage, but then one or other of the boxes refuses to continue the negotiation.
Looking at other forums I see I'm not the only one with problems on the Livebox (otherwise known as a Sagem 3202). I know the simple solution is a new Belkin or similar but I'm damned if I want to let this little white box defeat me. -
When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM -
I was hacked by the "whats app" email and had changed all my passwords (gmail, apple ID, etc), my mail app on my laptop is signed in to my gmail as per usual and is receiving mail but not sending mail. How do I get it to send mail again? Also is it ok to have the same gmail account used (as my mail and applied ID) after the hack or should I completely reset everything? Ie. get a new email address…So frustrated and confused, please help!!
It's normal for your phone number to be grayed out in Settings>Messages>Send & Receive under "You can be reached by iMessage at" on your phone because it can't be changed. If you phone number is listed there it should also be listed further down under "Start new conversations from". If you tap your number there to select it, your messages will be identified to others as coming from your phone number, not your email address.
Is you phone number listed there on your phone? -
my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061 -
Can't install iTunes 10.7 on my computer. Need administrator previliges. Signed in as admin. Please advise?
uninstall all the apple application S/w from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
This helped me -
I was in full screen mode and now that I have exited, the main toolbar for Safari is gone. So please don't say go to View. Each time I click off of safari to the desktop, it shows me the Finder Toolbar. I have opened and closed Safari many many times.
No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support. -
can't update apps on my iPhone 4s cos it says my daughter's Apple ID password is required: even though I'm signed in via my Apple ID in settings (she uses my Mac for her itunes and didn't sign out, i synced my phone and it's been like this ever since). And there's no option of signing her out, it seems? GRRRRR!
Fatlozza wrote:
can't update apps on my iPhone 4s cos it says my daughter's Apple ID password is required:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!
Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.
Maybe you are looking for
-
Multiple return fields in 'F4IF_INT_TABLE_VALUE_REQUEST'
I have used FM 'F4IF_INT_TABLE_VALUE_REQUEST'. CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' EXPORTING DDIC_STRUCTURE = 'ZRETURN_GP ' RETFIELD = 'KOSTL' PVALKEY = ' ' DYNPPROG
-
Bridge CS6 won't launch in Mac
I just installed Photoshop CS6 on my Mac, 10.7, and when I try to launch Bridge the icon bounces for a few seconds, but then it just closes, no errors or anything at all. It opens fine on the same machine with my other ID. I tried uninstalling and
-
Transporting users from BW system
Hi all Is there a way to transport users existing in BW3.5 system to another BW system,if yes can somebody give the steps.Please help. Thanks.
-
Hello, and using Outlook 2007 and I need to set a max size message warning or blocking before send the email, Can I do this? do I need to modify the registry with a new key? thanks note OS. is Windows 7.
-
Won't read CDs but DVDs normal data and video
My mid 2007 has stopped recognizing CDs, blank, data, and video. It makes several attempts to read then ejects disk. I haven't tried to record DVDs but it reads video and data normally. Sugestions?