Equivalent to TRUNCATE in Oracle Lite?

Short of dropping and recreating a table, is there any way to free up space in Oracle Lite - equivalent to the TRUNCATE command in Oracle?

TRUNCATE command is supported by Oracle Lite. However, it is basically the same as DELETE command, the database size won't get decreased.
Jerry Chiang

Similar Messages

XE for Oracle Lite

Is it possible use Oracle XE as back-end Oracle database for Oracle Lite clients?
And how about java support?

Technically it would depend on what dependencies the sync server that Oracle Lite uses. I believe that it has java dependencies, so probably not. I will check with the Oracle Lite developers.
From a license point of view, we will have to decide. Given that we don't see XE as suitable for a master in a replication environment, I doubt that we will see it as suitable for the equivalent functionality in an Oracle Lite environment

Data truncation with oracle.toplink.internal.databaseaccess.OraclePlatform

Hello everyone
I use Toplink 10g(9.0.4.5) with Oracle Lite database. I use the oracle.toplink.internal.databaseaccess.OraclePlatform and everything seems to be fine, except that when I pass a String more than the length defined in the Database, data is getting truncated to the maximum possible length in the Database and no exception is thrown. If I run a SQL statement directly on the Oracle Lite database using msql "value too large for column" exception is thrown.
The question is it the default behviour of oracle.toplink.internal.databaseaccess.OraclePlatform to truncate the data for the large Strings? How can i change this behaviour to throw an exception?
Any information on this would be highly appreciated.
Thanks in advance..

Thanks for the reply.
But my tests are pointing towards ToplinkPlatform only. I use the oracle.lite.poljdbc.POLJDBCDriver with Oracle Database Lite, and when I do a simple test to insert a large String wiht plaing JDBC and POLJDBCDriver, i receive the following error.
[POL-2403] value too large for column
However if i did the same using Toplink and oracle.toplink.internal.databaseaccess.OraclePlatform, the SQL statement generated by Toplink does not throw any errors. When i query the database, i see that the data is truncated. I use the same oracle.lite.poljdbc.POLJDBCDriver with Toplink.
<session>
<name>testLite</name>
<project-class>com.entityobjects.mappings.testLite</project-class>
<session-type>
<server-session/>
</session-type>
<login>
<driver-class>oracle.lite.poljdbc.POLJDBCDriver</driver-class>
<connection-url>jdbc:polite:POLITE;DataDirectory=C:\;Database=testLite;</connection-url>
<platform-class>oracle.toplink.internal.databaseaccess.OraclePlatform</platform-class>
<user-name>test1</user-name>
<password>test1</password>
<should-bind-all-parameters>true</should-bind-all-parameters></login>
<enable-logging>true</enable-logging>
<logging-options/>
</session>
I do not want to add a check at the object setter level, as the same object model is used in different projects and published across.
Any more ideas why data is getting truncated?
Thanks in advance for any suggestions..

Oracle Lite coalesce function

Hello everybody,
Coalesce functions does not exists in Oracle Lite?
How can I have the same behavior?
Thanks

You would have to code a java stored procedure your self.
You could use the coalesce function in an SQL statement as follows:
SELECT coalesce( address1, address2, address3 ) result
FROM suppliers;
The above coalesce statement is equivalent to the following IF-THEN-ELSE statement:
IF address1 is not null THEN
result := address1;
ELSIF address2 is not null THEN
result := address2;
ELSIF address3 is not null THEN
result := address3;
ELSE
result := null;
END IF;

Oracle Lite DBMS

Hi,
I am new to Oracle Lite implementation and in the process of understanding the planned architecture which will have central 10g standard and oracle lite on multiple locations.
At this stage, i need oracle lite database to create database objects and provide database connectivity to java developers. So i planned to install Mobile development Kit.
Have I correctly noticed that mobile development kit is not available on linux ? what is the equivalent product available for linux ? Does installing Mobile Server make sense?
Appreciate links to useful articles/info to learn more on oracle lite implementations.
TIA,
Rakesh

Hi,
Support for Linux is not as strong as for Windows. A version (5.0.2.0.0) of Oracle 9i Litefor Linux is available at the following location:
http://www.oracle.com/technology/software/products/lite/index.html
The tar file should contain everything that you need to develop and run an Oracle 9i Lite application. You will have to get support contract from Oracle to get updates to the product.
-- Ravi

Oracle Lite + Resin + jdk1.2.2 or jdk 1.3.1 problem

Hi!
Can some one help me this the following:
I used Oracle Lite database, Resin app server and jdk1.2.2
When I try to connect my database through simple java-application, all goes fine! But, when I trying to get database communication from my application server and problem arise. First of all dll's such as
OLJDBC40.DLL, OLAD2040.DLL, OLOBJ40.DLL, OLOD2040.DLL OLSQL40.DLL are in the Path and JVM loads them at runtime. I got connection to DB. Than I try to get some DatabaseMetaData info and got EXCEPTION_ACCESS_VIOLATION (for jdk1.3) and "java.exe has generated error (for jdk1.2.2)" errors from VM.
So, any idea?
Any help apriciated...
RGS,
parasolko

Hi,
I have got the similar problem when I used MS SQL server + Tomcat + JDK1.3.0 via JdbcOdbc driver. In that configuration the JVM crashs very often. It seems that JdbcOdbc's got unstable problem. Then, I tried other type 4 JDBC driver, it works fine and JVM won't crash. Try Sprinta 2000 JDBC driver, it's a type 4 driver and fast stable.
Ma

Oracle Lite and Oracle 8i Client on Win98

I've had Olite v8i running on my Win98 machine for a while now. I just installed Oracle 8i Client on my machine. Now, my JDBC driver for Oracle Lite does NOT work. What could have happened here??
Thanks.
-Jeremy
null

HI Jeremy,
I think, Your PATH was cranked up.
The JDBC driver for OLite normally does not use any OCI DLLs, so that should not be the problem. As I said, the OLite dlls may be missing now from the PATH.
Any error messages? "Does not work" is a bit... fuzzy.

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

How to create a table in Oracle Lite database?

Hi,
I have installed SOA 10.1.3 on my laptop. Now I am trying to create a table in the database to do some own examples. I have problem in installing oracle database. So I am trying to create a table in Oracle Lite database which comes with SOA suite. I am not able to do it, can some body suggest me please?
Regards
Khaleel

HI James,
Thank you so much. I am able to create table and insert rows and able to select them too. However I am not able to use these tables in my BPEL process for my practice. The DB adapter is throwing some error, any idea?
--khaleel

Error while trying access JSP page first time using Oracle Lite

Hi,
We are doing a proof of concept using Oracle Lite 10gR3. Installed Mobile server and published a JSP based application. Installed web-to-go setup.exe on a client machine and synchronized the application. However when we tried to open the page, it comes up with an error. We are using jdk version 1.4. Any advise will be highly appreciated. Thanks.
Error message:
Requested URL:/webtogo/18Mar1/MyIndex.jsp
Exception: oracle.classloader.util.AnnotatedClassFormatError:_MyIndex (Unsupported major.minor version 49.)
Invalid Class: _MyIndex
Loader:mobileclient.web.18Mar1.jsp22486527:0.0.0
Code-Source: /C:/MyInstallation/mobile_client_oc4j/j2ee/mobileclient/application-deployments/mobileclient/18Mar1/persistence/_pages/
Configuration: *.jsp in C:\MyInstallation\mobile_client_oc4j\j2ee\mobileclient\application-deployments\mobileclient\18Mar1\persistence\_pages
Dependent Class: oracle.jsp.runtimev2.JspPageInfo
Loader: oc4j:10.1.3
Code-Source: /C:/MyInstallation/mobile_client_oc4j/j2ee/mobileclient/lib/ojsp.jar
Configuration: <code-source> in META-INF/boot.xml in C:\MyInstallation\mobile_client_oc4j\j2ee\mobileclient\oc4j.jar
This class was compiled for a newer version of the JRE. Expected version 48.0, found 49.0

(Since this is the general forum for the 'big' database, my advice would be to ask in the Oracle Lite forum. Database Mobile Server (inc. legacy Database Lite)
If this is a formal evaluation, you could also get a Sales-sponsored trial which usually comes with 30-90 days of Metalink support. You would be able to search for notes like Doc 414106.1
Bottom line is that the code is for JDK 1.5 and it's being deployed against JDK 1.4.2. Something needs to be either upgraded or downgraded.

Unable to install Oracle Lite 10g on Windows 7 64-bit

I've tried installing Oracle Lite 10g on my Windows 7 64-bit computer but I get a message saying "JDK is not installed on machine". I even have Java installed on my computer too.
Any ideas what could be causing the issue?
Thanks
Gareth

Oracle lite 10g is not supported on Windows 7. The core issue is you are running on an unsupported platform.
You have may have to go in the docs and figure out what JDKs were supported, i think 1.4 and 1.5. and try
installing one of those and maybe you can get uninstall to work. This is just a guess though.
thanks
mike

Install on vista with Oracle Lite Multiuser Service - SERVICE_START_PENDIN

Hi all,
I'm trying to install app server 10.1.3 on Vista, but on Configuration assistant screen, it stops at BPEL process manager configuration manager ,
error in oraInstall.err:
C:\Users\victoria\AppData\Local\Temp>echo updating ODBC.ini
updating ODBC.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating ODBCINST.ini
updating ODBCINST.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating POLITE.ini
updating POLITE.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>exit
Oracle JAAS [Mon May 18 08:36:05 GMT 2009] admin password is changed successfully
opmnctl: starting opmn and all managed processes...
OliteService reports the following status:
The service is installed.
OliteService reports the following status:
The service start pending.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_START_PENDING
Acceptable Control Code : (0x0)
installaction.log:
BUILD SUCCESSFUL
Total time: 3 minutes 35 seconds
C:\product\10.1.3.1\OracleAS_1\bpel\samples>ENDLOCAL
BUILD SUCCESSFUL
Total time: 4 minutes 43 seconds
Exit: 0
TASK: oracle.tip.install.tasks.UpdateConfigFiles
Updating configuration files ...
Exit: 0
TASK: oracle.tip.install.tasks.RegisterOlite
Registering Olite ...
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OB_HOME=C:\product\10.1.3.1\OracleAS_1\bpel
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_LIB=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_BIN=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set PATH=C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\oracle\product\10.2.0\db_1\bin;C:\app\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\server
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set CLASSPATH=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olite40.jar;C:\product\10.1.3.1\OracleAS_1\MOBILE\Sdk\bin\OLITE40.JAR;
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /stop
OliteService reports the following status:
The service stop is pending.
OliteService reports the following status:
The service is stopped.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_STOPPED
Acceptable Control Code : (0x0)
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /remove
OliteService reports the following status:
The service is removed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /install
OliteService reports the following status:
The service is installed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /start
OliteService reports the following status:
The service start pending.
OliteService reports the following status:
The service is running...
port = 1531
wdir = C:\Windows\system32
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_RUNNING
Acceptable Control Code : (0x1) SERVICE_ACCEPT_STOP
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>mkdir "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>del /f "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>"C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\createdb.exe" orabpel "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb" manager
Database C:\PRODUCT\10.1.3.1\ORACLEAS_1\BPEL\SYSTEM\DATABASE\OLITE\ORABPEL.odb created (VolID = 1736).
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>exit 0
Could Not Find C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb
Oracle Lite CREATEDB Version 10.2.0.2.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Exit: 0
TASK: oracle.tip.install.tasks.DeployApps
Deploy applications and adapters
Port value is 6003
Buildfile: bpminstall.xml
init-midtier:
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://victoria-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_admin_client_script_sl.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
update_server.xml:
restart.container:
Stopping home container ...
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
no processes or applications matched this request
Restarting home container ...
opmnctl: starting opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
0 of 1 processes started.
ias-instance id=oapp1013.victoria-PC
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=503452990,pid=3000)
failed to start a managed process after the maximum retry limit
Log:
C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
init-midtier:
Setting up the dehydration store [olite]...
dehydrationStore:
Configuring data sources for olite dehydration store ...
Deploying ORABPEL Applications...
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Updating jar: C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://my-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Please advise what's wrong?
thanks
andrew

The following procedure describes the steps required to deploy the DbAdapter.rar file using admin_client.jar:
1. Copy the following libraries from server.xml in an OC4J_SOA container to a server.xml file for a new
container:
oracle.bpel.common
apache.junit
oracle.db.lite
apache.commons
apache.jdom
apache.slide
For example, for oracle.bpel.common, copy the following extract from one server.xml to another and
do the same for all other libraries:
<shared-library name="oracle.bpel.common" version="10.1.3">
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/classes"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-thirdparty.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bpm-infra.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/connector15.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-exts.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-ant.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/ant_1.6.5.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bipres.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bicmn.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/uix2.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/jewt4.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/regexp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/share.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jdk/lib/tools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/ldapjclnt10.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/schema"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/config"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/bpm-services.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wfapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/fndctx.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/phaos.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/pushapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/oracle_http_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_api_v3.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/wasp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_core.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/saaj.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxm.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/builtin_serialization.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/core_services_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxrpc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rl.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rulesdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/webdavrc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/jr_dav.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/webservices/lib/wsif.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/oraesb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/bpm-ide-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rdbms/jlib/xdb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/ide.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/javatools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/xmleditor.jar"/>
<import-shared-library name="oracle.dms"/>
<import-shared-library name="oracle.jdbc"/>
<import-shared-library name="oracle.xml"/>
<import-shared-library name="oracle.jwsdl"/>
<import-shared-library name="soap"/>
<import-shared-library name="oracle.ws.client"/>
<import-shared-library name="oracle.toplink"/>
<import-shared-library name="apache.junit"/>
<import-shared-library name="oracle.db.lite"/>
<import-shared-library name="apache.commons.logging"/>
<import-shared-library name="oracle.cache"/>
<import-shared-library name="apache.commons"/>
<import-shared-library name="apache.slide"/>
<import-shared-library name="apache.jdom"/>
</shared-library>
2. Restart the container to make sure that server.xml was updated correctly.
3. From the configtools.log file find the opmn port number, for example:
deployer:oc4j:opmn://dimak.au.oracle.com:6012/home
dimak.au.oracle.com - is the machine name and
6012 - port number
4. Launch a new command prompt
and set path and classpath, for example:
set PATH=$ORACLE_HOME\jdk\bin;%PATH%
set classpath=.
where in the classpath there is only one entry - the dot, which stands for the current directory.
5. change directory to the following:
$ORACLE_HOME\j2ee\home
and run the following command (written all on one line) to deploy the DbAdapter:
java -jar admin_client.jar deployer:oc4j:opmn://dimak.au.oracle.com:6012/test oc4jadmin
manager1 -deploy -file $ORACLE_HOME\integration\esb\lib\DBAdapter.rar -deploymentName
DbAdapter2 -parent default
where
* dimak.au.oracle.com should be substituted with your machine name
* 6012 should be substituted with your port which you found in step 3
* test is the name of the container you want to deploy the adapter to
* manager1 should be substituted with your oc4jadmin password
* $ORACLE_HOME\integration\esb\lib\DBAdapter.rar is the location of the DBAdapter.rar file
* deploymentName DbAdapter2 - should be different from DbAdapter, as that name is already used in the OC4J_SOA container.

Converting between tables in an Oracle Lite Database

We have a standalone application that uses Oracle Lite. A requirement we have from a new customer is to use their Oracle Lite database structure or to come up with a mechanism that sends the data between the 2 different structures.
Both the structures reside in the same database.
Initial thoughts were to write triggers on both structures that convert the data or to use XML / XSL and treat them as seperate apps.
However, I'm wondering if there is a different way. Do Oracle provide any tools that can help with mapping between 2 different structures that hold the same domain data?
Anyone got any better ideas?
Cheers, Matt

We have a standalone application that uses Oracle Lite. A requirement we have from a new customer is to use their Oracle Lite database structure or to come up with a mechanism that sends the data between the 2 different structures.
Both the structures reside in the same database.
Initial thoughts were to write triggers on both structures that convert the data or to use XML / XSL and treat them as seperate apps.
However, I'm wondering if there is a different way. Do Oracle provide any tools that can help with mapping between 2 different structures that hold the same domain data?
Anyone got any better ideas?
Cheers, Matt

Oracle Lite 10.3.0: how to find out the consumed size of a BLOB column

Hi,
we are developing an app that utilizes an Oracle Lite database and so far I have just been unable to find a reasonable way to determine the size of stored binary data.
All the "usual" ways we aware of from "main" Oracle just don't seem to work with OLIte (ie SELECT dbms_lob.getlength(file_data) from APPS.CSL_LOBS) so how does one find out the size of blob objects?
Thanks in advance

Assuming BLOBs are not stored in-line:
SQL> desc pm.print_media
Name                                      Null?    Type
PRODUCT_ID                                NOT NULL NUMBER(6)
AD_ID                                     NOT NULL NUMBER(6)
AD_COMPOSITE                                       BLOB
AD_SOURCETEXT                                      CLOB
AD_FINALTEXT                                       CLOB
AD_FLTEXTN                                         NCLOB
AD_TEXTDOCS_NTAB                                   PM.TEXTDOC_TAB
AD_PHOTO                                           BLOB
AD_GRAPHIC                                         BINARY FILE LOB
AD_HEADER                                          PM.ADHEADER_TYP
SQL> select segment_name,
2          index_name
3    from dba_lobs
4    where owner = 'PM'
5    and table_name = 'PRINT_MEDIA'
6    and column_name = 'AD_COMPOSITE'
7 /
SEGMENT_NAME                   INDEX_NAME
SYS_LOB0000051988C00003$$      SYS_IL0000051988C00003$$
SQL> select sum(bytes)
2    from dba_segments
3    where owner = 'PM'
4      and segment_name in (
5                           'SYS_LOB0000051988C00003$$',
6                           'SYS_IL0000051988C00003$$'
7                          )
8 /
SUM(BYTES)
    262144
SQL> SY.

Client Upgrade issue in Oracle Lite Database 10g 10.3.0.3.0

Hi all,
Details: My Environment is Oracle Database 11g R1(11.1.0.6.0) With Oracle Lite Database 10g R3(10.3.0.3.0) on Windows 2003 Server R2 SP2.
Recently i have upgrade my oracle lite database from 10.3.0.2.0 to 10.3.0.3.0 and also applied recent opatch (p12812978_103030_Generic.zip). Upgrade and installation of opatch got successfully completed. When i tried the client synchornization for the very first time (FCS and Data Download) FCS and Data Download got Successfully completed but the problem is usually Once the FCS and Data Download Got Completed , Screen goto webtogo home page but in my case i am getting a screen name called "client upgrade" with options yes or no if choose yes it prompting please wait screen nearly for 1 hours i am not getting any response from the screen. if choose no simply it goto my webtogo home page. Please Note before choosing the yes option i have checked what version i am currently having it show 10.3.0.3 i don't know why it asking for the client upgrade. Please Advice me on this how to avoid this screen (Client Upgrade).
Thanks
Shan

Hi,
i am not upgrading the existing environment of Oracle Lite Client i am creating a new environment which doesn't have the Oracle Lite Client. In the document itself they have mentioned like this "These steps assume that you have a 10g Release 1 or 2 Branch Office environment already configured and synchronized. If you do not have this environment currently configured, you do not need to upgrade." To be Clear What i am doing is with help Oracle Lite Branch Office i will be downloading a user from Mobile Server for that i have to do the following
1.FCS(Fresh Client Setup for that i have to run the setup.exe which is coming for Oracle Lite Branch Office) and
2.Data download (Data will be get download from Mobile Server in the form of odb),
3. Usually Once the FCS and Data Download got completed, the screen will goto the webtogo home there i can see my branch offlice applications.
4. But in my case i am getting prompted by screen and the screen name called "Client Upgrade" with options yes or no if i choose yes screen got hanged else if i choose no then only screen moving the webtogo home page. Say can u r having existing environment in your machine due to some reasons u have upgrade or u have installed optach on the mobile server in that case while doing the client synchronication we can do the client upgrade by running the update.exe becasue client side will having the old binary file we need to renew it.
5. But I am not upgrading the existing environment. I am creating a new environment which means i am doing a fresh client setup and synchronization for the very first time. While doing the FCS on my client side for the very first time i will be getting the latest binaries rite then why the screen is moving to client upgarde page i don't have any idea on this.
Please Advice.
Thanks
Shan

Equivalent to TRUNCATE in Oracle Lite?

Similar Messages

Maybe you are looking for