Er Job Devmt Assessmt tax (wage types /415, /615 and /715) for Tax Auth DC

When I am running payroll for an emp belonging to Tax Authority DC, wagetype /615 is being calculated correctly. However wagetype /715 is not adding up a particular wagetype amt and is thus less in amt than /615.
Wagetype /715 should be equal to /615. How do I approach this problem ? If at all there is an issue at BSI 's end, how can I zero-in on the exact problem?
N.B: I have already checked the Tax Model settings, alls fine.
Thanks And Regards,
Somdeb Banerjee.

Hi Manny,
               Thnx for the input. However I checked table T5UTX to see the ceiling there. The ceiling is 9000.00. However amt in RT Table for /715 wage type is much below the ceiling value i.e 1,210.51.
Amt in /615 = 1,213.47 . This diff of $ 2.96 is due to the presence of Gross-up wagetype 12SC. I have checked the Tax Model settings for DC thoroughly to see that this wagetype 12SC gets included in the taxable for Er Job Devmt Assessmt tax. And /615 is being calculated as expected in the RT Table. The problem lies with /715 !!
I am a bit confused by the presence of 2 entries for Tax Type 15 in the payroll log in Func USTAX:
Tax authority DC District Of Columbia DA01
Tax Category                                                  Tax.inc    Tax-free Inc.Declare Tax.earning         Tax
01 Withholding Tax                          (REG)     1213.47        0.00     1213.47     1213.47            57.00
10 Employer Unemployment Tax      (REG)     1213.47        0.00     1213.47     1213.47           15.78
15 Er Job Devmt Assessmt Tx      (REG)        2.96            0.00        2.96        2.96                    0.01
15 Er Job Devmt Assessmt Tx      (REG)     1210.51        0.00     1210.51     1210.51             2.42
41 Employee Disability Tax             (REG)        2.96             0.00        2.96        0.00                  0.00
Why are there 2 entries separately for Tax Type 15 ? The answer might be the solution to this issue.
Please help.
Thanks And Regards,
Somdeb Banerjee.

Similar Messages

Calculation of difference of wages types master data and accounting cluster

Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
Officer in-charge of payroll accounting
Officer in-charge of Support
Officer in-charge of time recording
also from where I could get the accounting cluster data for the wage types
I want to know from where I can get these fields and how ther are related with wage types.

Check through PA30,there are different infotypes by which these data are maintained in the Employee Master.

Difference of wages types master data and accounting cluster data

Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
Officer in-charge of payroll accounting
Officer in-charge of Support
Officer in-charge of time recording
I want to know from where I can get these fields and how ther are related with wage types.

Hi Luo
As per below link
How to... MDG-M: Use the Data Import Framework | SCN
The IDoc doesn't support flex entities, as they don't write into active area. Therefore, the DIF can only be used to load reuse entities in staging or active area.

In material master two countries are comming Hu and De for tax classificati

Hi All,
In material master two countries are comming Hungary and germany for tax classification ,can anybody tell why .
Thanks

Hello,
Please check the Tax Determination Rules & Tax Relevancy of Master Records in the link below:
IMG - Sales and Distribution - Basic Functions - Taxes
1. Define Tax Determination Rules
2. Define Tax Relevancy Of Master Records - Materiall Master.
It is from the above links the Countries & Tax Categories are proposed in Material Master / Customer Master.
Hope this helps,
Thanks,
Jignesh Mehta

FIND OUT GAPS IN TAX TO COMPARE IN OLD AND NEW FOR BUDGETARY PURPOSE.

CAN I HAVE EXPALINARY DOC WITH EX BUSINESS PROCESS. SPECIFICALLY TO
FIND OUT GAPS IN TAX TO COMPARE IN OLD AND NEW FOR BUDGETARY PURPOSE.
THANKQ FOR IMMIDIATE RESPONSE
Annie

You can use DBMS_LOB.COMPARE

Reg : Tax wage types

Hi all,
What r the TAx payable Wage types?
Would u plze tell me the steps for Form -16?
What r the important PCRs in payroll log?
What is Test scripts & would u please explain that?
Thanks,
Laxmi.P

1).SAP provided standard Wagetypes for all Countries,Out of them some are Taxable and some are not.
2) Infortypes .0580 to 0590 are Tax related Infotypes and highly impact on FORM 16 so maintain one by one in master data and check how they are effecting in Form 16
3).All the PCRS are important and each PCR has its own functionality.
4)Test scripts are the scripts which are made by the user or consultant in excel sheet or word and to check the scenarios in SAP and compare the OUTPUT with the test cases.
Thanks

How to create a new wage type in IT0014 and assign the GL?

Dear Gurus
Please guide me about Creating of new wage Type in 14.
My client wants to add a new wage type says:-1HRR ( Honorarium) & assign the same to Training Expenses GL account and order number. How to do it. Please guide.
Regards
Vikas K Sharma

To copy a standard WT and assign a new name with the same attributes and characterstics:
IMG > Personnel Management> Personnel Administration> Payroll data> Recurring Payments and Deductions. Copy any standard Wage Type.
Check assignment of WT to a Symbolic Account :
(The WT will inherit the Symbolic account from the copeid standard WT)
Go through SM30 to Table V_T52EL_NOFM. Make neccessary changes to the Symbolic account, if needed.
To create a new Symbolic Account and assign it to the WT:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Employee grouping and symbolic accounts --> Define symbolic accounts
To assign the WT to the new symbolic account (same as table V_T52EL_NOFM):
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Wage Type Maintenance --> Define WT posting attributes
To assign a symbolic account to a G/L or Check the assignment of Sym Acc to G/L:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the AC-System -->Account Assignment --> Assign expense accounts.
Hope this helps.
Soujanya.

Condition types MWSI and MWVO for TAXES

Hi,
I am trying to create the new condition types MWSI, MWVO and accounting keys SIV, SIO for new tax keys (TAXES) for the report RFIDESM340. I didnu2019t find any instruction about the parameters behind MWS and MWVO.
Can someone advise me on this?
Thanks and Regards,
Detlef
Edited by: Detlef Weiss on Mar 15, 2010 1:06 PM

Dear,
The difference between pricing conditions PB00 and PBXX is :
PB00- automatic pricing - can be used for automatic pricing determination
PBXX- manual pricing - used for manual pricing.
When you maintain the pricing condition for the PO, the system will look at the available condition records (for PB00) and make the automatic pricing determination. In case, such condition records were not defined, then it is mandatory that you have to maintain manually the pricing condition where PBXX will be automatically defaulted in replacement for PB00.
Regards,
Syed Hussain.

Table and fields for tax details

Hi,
I have to create one Finance module Report in which i want to display net amount without tax for one single line item which is open item for incoming customer invoice, the accounting department need to know the net value (without tax) .
In tcode FB03 , if you see the document number then it will give all accounts(customer), posting key wise amount, but this amount is gross amount. in this amount tax amount is added as per tax code. (you can see by clicking tax details tab), and tax calculated is for whole ducoments number not for single line item.
i want net amount without adding tax amount for particular single line item. so please guide me table and fields from where and how i can calculate. in tax tab there is field base amount but its giving calculation against all total against document.
table i am using in my report is KNA1.KNKK, KNB1, BKPF. BSEG.
Give me some idea. how can i prepare report.
Have a Nice Day,
Regards,
Sujeet

Dear Dzed Maroz ,
Thanks for your reply.
I have already checked these fields (HWSTE, FWSTE) in table BSET. this fields tax amount againt that Document Number. (which may contains more than one line items), but my requirement is to find the amount without tax for individual line item.
reason is , i want to display in my report only open items and it will be a line item, so i am displaying net amount as well base amount (without tax) for particular line items.
but tax details is calculated based on document number not against customer number.this is incoming invoice
,and in customization tax code is assigned, so its reflecting amount after including tax amount.
is there any way to find out solution? please give me some idea.
regards,
sujeet

AME can i create a Rule type List Creation and category For Your Info?

Hi,
I have created two rules.
1st rule create the list of approvers to approve the leaves i.e. supervisor then department head.
Till this every thing is going fine transaction are getting approved by both approvers and leave is crated in Application.
Now I create 2nd rule to send FYI notification to HR Administrator.
When employee Appling for leave it shows the list of approvers correctly i.e. supervisor, department head as approvers and HR Administrator FYI notify.
Now HR Administrator opens the notification and close the notification and Approvers approved the transaction. PPROBLEM IS Transaction is not getting close and hence leave is not getting create in application._
Edited by: SHEIKHG on Aug 28, 2009 9:11 PM

No I have not customized the workflow. becuse the notification have all details if the rule is list creation. But if rule type is post-chain-of-authority approvals or pre-chain-of-authority approvals then the notificaiton has no useful info.
Thats why I want to use Rule Type List creation for FYI notification. But when i do so my transaction is not getting complete.

Pre-Tax Deduction Wage Type

What is the best practice to create a new Pre-Tax Deduction Wage Type that will be used for a new Benefit related program?
I will need this new pre-tax deduction wage type to be processed in Third Party.
Thanks,

You can copy one of the model wagetypes BA , BE , BR series has most of benefits wagetype.
BA_ _ EE Contribution
BE_ _ EE Contribution
BR_ _ --> Employer Contribution
M730 401K contribution
1. goto Pu30 use one of the model wagetype and copy to a custom wagetype
2. change it hr payee and vendor number in the SPRO--> Payroll --> Payroll US --> third Party remittance node

Problem in Tax Exexpiton for Newly created Wage type

Dear Gurus,
I Have tried to create a New Wage type for Allowance with Exemption IT582 created Amount. In pay roll results the IT582 Exemption amount is coming. In Wage type /132 Monthly Exemptions it says the Entire Amount which it created for the Particular wage type.
Example:
Newly created wage type 1010 : 10,000
Exemption Created : 6000
Payroll Results:
/132 : showing 10,000+800 Conveyance
MCAX : 6000 - Custom Allowance
MCMX :6000 - Custom Allowance.
By the above result the Gross value reduced to -10,000.
Please suggest me to complete this process.
Thanks in Advanc.
Anbu.

Hi Anbu,
I am lil bit confused abt the explanation u had given. anyway i will explain the configuration n step u need to perform-
configure a wage type in V_T7INA9 and V_T7INT9 view first.
maintain the amount, which employee has submitted as claim.
then pass the value in infotype 8 or 14 or 15 through the same wage type u have configure.
now minimum of 3(entry in V-T7INT9, infotype 8 or 15 or 14 and entry maintained in infotype 582) will b the exemption amount.
Regards,
Praveen
Edited by: Praveen-Sapping in SAP World on Mar 26, 2009 10:11 PM

What are the different types of Wage types for Indian Payroll...??

Dear Frnds,
What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
And also please list Info types numbers for different types of TAX and Allowances.
Many thanks in advance.
Regards
Ahmed.

for the list of the wage types you can check V_512W_D for country grouping 40 Inida
for Tax related info please search the forum or search google you will get lot of inputs

Wage type AMT in TCRT

Hi All,
We ran offcycle payroll later we made the run as void, But the amount in the TCRT got added to tax wage type /310,.
Please let me know the procedure.
for example in normal run for last month payroll /310 is 3000.
but when we ran the offcycle 500 got added. now we made it as void.
total in /310 has become 3500,
after void it should become 3000. It is not changing please correct me if I am wrong.
thanks
Veer

We did a void but did not run payroll again,
After running void we have to rerun payroll.
Thanks
Veer

Tax Type 11 - Arkansas and California

Hello Gurus
We have configured Tax type 11(Employer Debt Repayment) for Arkansas and California as part of TUB 46
The maximum earning base is 7000 to be deducted at 0.3%.
The /411 calculation seems to be maxed out at 21 USD however the earnings /711 are not correctly maxed out at 7000.
For Arkansas it never exceeds the limit and for California it exceeds the ceiling of 7000
Did you have any error implementing this
Apppreciate your inputs
Regards
Ajay

Hello,
Kindly clarify whether you have introduced the Tax type 11 in the start of the year or after some period is run. If it is from start of first period then /711 will be passed to BSI to calculate the tax. If it is after some period then kindly read below
About Tax Type 11:
As you may know, in BSI Tax Factory script we have a parameter Year Wages (YW:), that is nothing else than the total of taxable wages for this tax type/tax authority, or in other words wage type /7** from TCRT table for the corresponding tax company/tax authority/tax type.
For tax type 11, SAP payroll sends to BSI Tax Factory Script the year wages of tax type 10 - Federal.
What happens here: if you configure tax type 11 in tax model after employee reaches ceiling for tax type 10 Federal, payroll will send to BSI Year Wages of $ 7,000. As tax type 11 is a self-adjusted tax type, BSI will calculate the tax amount for $ 7,000, which is the ceiling for tax type 11 as well. If you force a retro, you will send the Year Wages according to each payroll period, and, therefore, wage type /711 will be calculated accordingly.
This is the way that the SAP and BSI systems were designed to work.
With Regards,
S.Karthik

Er Job Devmt Assessmt tax (wage types /415, /615 and /715) for Tax Auth DC

Similar Messages

Maybe you are looking for