ERR:10003 Unexpected data store file exists for new data store

Our TimesTen application crashes and then it can not connect TimesTen datastore, and then we use ttIsql and get error "10003 Unexpected data store file exists for new data store".So we must rebuild the DataStore.
I guess the application damages the datastore because we use "direct-linked" mode. Is it true?
Should I use "Client-Server" mode if our data is very important?
thx!

Your question raises several important discussion points:
It is possible (though very unlikely in practice) for a C or C++ program operating in direct mode to damage the contents of the datastore e.g. by writing through an invalid memory pointer. In the 11+ years that TimesTen has existed as a commercial product we have so far never seen any support case where this was diagnosed as the cause of a problem. However, it is definitely a theoretical possibility and rigorous program testing and use of tools such as Purify is strongly recommended when developing in C or C++ in direct mode. Java programs running in direct mode are completely 'safe' unless they invoke non-Java code via JNI when a similar risk is present.
The reality is that most customers who use TimesTen in very high performance mission critical applications use mainly direct mode...
Note also that an application crashing should not cause any damage or corruption to a datastore, even if it is using direct mode, as Times%Ten contains explicit mechanisms to guard against this.
Your specific problem (error 10003) is nothing to do with the datastore being damaged. This error reflects a discrepancy between the instance main daemon's metedata about all the datastores that it is managing and the reality. This error occurs when the main daemon does not know about a datastore and yet when it comes to connect to (and hence create) the datastore it finds that checkpoint or log files already exist. The main daemon's metadata is managed solely by the main daemon and is completely separate from the datastore and datastore files (the default location is <tt_instance_install_directory>/info, though you can change this at install time). The ususal cause of this is that someone has been manually manipulating files within that directory (which of course you should never do) and has removed or renamed the .DBI file corresponding to the datastore.
This error should never arise under normal circumstances and certainly not just because some application has crashed.
Rather than simply switching to the (much slower) client/server mode I think we should try and understand why this error is occurring. Could you please post the following:
1. Output of ttVersion command
and then we can take it from there.
Thanks, Chris

Similar Messages

1003 error:unexpected data store file exists for new data store

dear chris
when we use timesten, what happened cause the error 1003, I don't know what cause it happen. it works well before. but it happened today twice.
anyone know the reason ?? Any help is appreciated!
Thanks

The TimesTen daemon maintains a 'catalog' containing information about datastores that it is managing. From the daemon's perspective, a datastroe is uniquely identified by the pathname for the checkpoint files (the value of the DataStore attribute in a DSN definition). The daemon knows nothing about DSNs or ODBC.INI files...
A datastore is physically created, and hence registered with the instance daemon, the first time something connects to it specifying the ODBC/connection attribute AutoCreate=1 (which is the default value). From that point, the datastore has a physical existence (checkpoint and log files exist on disk), is known to the daemon and hence will appear in the output of the ttStatus command.
If at the time you connect to a datastore with AutoCreate=1 and the daemon has no record of the datastore it will try and create it. If it finds that the checkpoint files already exist in the specified location on disk then this is 'unexpected' (since the datastore should not exist yet) and error 1003 results.
Seems like you have somehow got some checkpoint files existing that the daemon does not know about. You have made some kind of mistake somewhere I guess; maybe you copied files around inadvertently?
Chris

Error : Undeleted archive files exist for FI_ACCPAYB

Hello,
A vendor was flagged for deletion by mistake. Now I need to remove this flag, but I cannot. I have the following error:
"Undeleted archive files exist for FI_ACCPAYB"
Can you help me?
I should probably delete the archive, but I do not know where I can find it.
Thank you in advance for your help!
Veronika

Hello Veronika
Are you sure which you told about Master Data Management?
As usually you cannot delete file if that file opening by some another application.
Regards
Kanstantsin _Chernichenka

No configuration files exist for this connector?

I am trying to install Oracle Application Table connector for that I have copied the all files/directory into ConnectorDefaultDirectory but still getting following error.
No configuration files exist for this connector.
Ensure that valid configuration XML files exist in the configuration directory.
Any help?
thanks
TK

I have server/ConnectorDefaultDirectory and when I unzipped the TableResource zip inside ConnectorDefaultDirectory ...... it created following folders
1. configuration (This folder contains DatabaseApplicationTables-CI.xml)
2. documentation
3. lib
4. ProviderDefinitions
5. resources
6. targetsystems-lib
Can you please let me know what should be configuration file name?
I have downloaded these zip files from following location
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/connectors-101674.html
thanks for your help
TK

Get Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

how to get SQL server Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

Hi Shivanq,
To get a list of databases, their sizes and the space available in each on the local SQL instance.
dir SQLSERVER:\SQL\localhost\default\databases | Select Name, Size, SpaceAvailable | ft -auto
This article is also helpful for you to get DB and Log File size information:
Checking Database Space With PowerShell
I hope this helps.

Period is locked for new data

Good Morning,
Anyone get this error before?
-4013:Period is locked for new data
   at NetPoint.SynchSBO.SBOObjects.SBOOrder.NetPointToSBOOrder(NPOrder order)
   at NetPoint.SynchSBO.SBOObjects.SBOOrder.NetPointToSBO(NPQueueObject qData)
   at NetPoint.SynchSBO.SynchObjectBase.Synch()
Haven't received it before today, of course, the day we go live. The period we are posting to is not locked for new data and it seems to be limited to one customer only... Any immediate thoughts?
Thanks so much,
Kristen

OK, I have it working for the moment, but I am very curious about this. I went back in and selected the Install Plugin button 2 more times just to be sure, I restarted everything and they went through fine. Could it be that the Plugin installed partially before? It didn't seem so because other orders were flowing both ways and just certain ones were seeming to get stuck... Then more gradually started failing until none were passing through. This has been working seemlessly in this environment for weeks until of course go live today, so I am at a loss. Probably just that one piece of excitement for Go Live that we were missing. All is well. James, thanks for responding.

Period is locked for new data [Message 131-107]

Hi all,
One of my client was faced this problem "Period is locked for new data [Message 131-107]" when they do Period-End-Closing for Year 2008 in SAP Business One 2007A Patch 42.
Can anyone help me?
Thank you.
Best regards,
danny

Hi Danny,
Check the link
Period End Closing
*Close the thread if issue solved
Regards
Jambulingam.P

Period locked for new data on PO an SO

Since last week when we try to update a PO anr SO we got this Message
PERIODE LOCKED FOR NEW DATA.
For exemple we change the remark feild only and we got this message.
Since PO and SO are not impacting any gl entry this is not normal. on the DEMO DB i can update a SO or PO when the perio is close without any problem

Hi Roy,
First you have to change if your posting perioud is close.
if close then choose your posting perioud then in your window left side a sign of triangle click on.
after change ur status and after u are able to do changes in previous posting perioud.
this may help u...
Thanks.
JRAJPUT

Default File Type for New Forms - How to change?

Hi,
How can I change propperty: Default File Type for New Forms?
It is enabled! Do I have to be Administrator to change it? I have SAP ALL..
SFP -> Layout -> Tools --> Options -> Document Handling
tnx, Adibo.

There is no authorisation required for changing the file type. You are saying its enabled, then you can change it.
Edited by: Nikhil Poojari on Aug 28, 2009 6:50 AM

I am getting occasional Safari is out of date messages but checking for new software says "up to date".

weI am getting occasional Safari is out of date messages but checking for new software says "up to date". Initially we subscribed to Support but did not realize that it has expired. We have upgraded the OS once but have not received any notices of additional upgrades. So far I have not come across a way to update on my own.

I suspect this is the issue but wonder whether it is wise to upgrade my model:
Model Identifier: iMac11,2
Processor Name: Intel Core i3
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
Will it run it?

I want to delimit the date of table v_t7int1 for new sap note uploading

Hi
i want to delimit the date of table v_t7int1 for new sap note uploading. wtihout delimit the date i can't create new note for the year 01.04.2009 to 31.12.9999
Anjali

Hi
When i select the slab code sl10 and press delimit button system is asking the From Date and i want TO DATE and i have to Delimit the date of slab code SL10, SL11,SL12 and SR02 and then i have to create SL13,SL14 and SL15.
Anjali

I changed the id and password for iTunes and app store. login fine for tunes. app store downloads id is incorrect and grayed out. how can i enter correct id?

i changed the id and password for iTunes and app store. login fine for tunes. app store downloads id is incorrect and grayed out. how can i enter correct id?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

Ichanged the id and password for iTunes and app store. login fine for tubes. app store downloads id is incorrect and grayed out. how can i enter correct id?

i changed the id and password for iTunes and app store. login fine for tubes. app store downloads id is incorrect and grayed out. how can i enter correct id?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

Retain data in String Display untill new data is delivered in RS-232

I am using Labview 8.6 on Windows XP OS and acquiring signal from RS-232 through COM1 port to which I have connected non NI instrument. My instrument sends data for flash of second and it displayed into String Indicator for flash of second. How to hold this data untill I get new data from instrument. I have tried to select "re-initialise to default value" and "make current value default" but none of them getting selected. I want data to be retained untill new data comes. I have enclosed VI as well as Picture file. Pl advice.
Attachments:
HPLC Flow Meter 3.vi ‏32 KB
HPLC FLow 3.JPG ‏123 KB

-Looks you are sending or running the while loop every 5ms, are you sure you want this fast? This is the reason the data comes in flash(i think 5ms)
-I use shift register to store something from previous iterations generally.
-You need to keep case structure to check when new data comes and when it does, replace the value in that string.
-else pass previous value to string.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

System date in file name for Sender Configuration

Hi all,
I need to retrieve some files every day from my source directory, using the system date as a mask for the filename. Is it possible to do any kind of dynamic configuration for Sender Adapter? I only need to read the files with the current system date every day.
Thanks in advance.

Hi,
><i>
only need to read the files with the current system date every day.</i>
Sorry failed to see this.
Not currently possible without workarounds in XI.
1. Use a Staging folder where the senduing system will put the files. Write a shell script which will move only the current date files to the folder on which XI is polling. Here , you can use wild card characters.
2. Module option , not sure how it will work. You will be doing an I?O inside the module code and this is not recommended. Also, what will be the trigger for your interface if you are planning to use a module to read the files on the basis of System Date.
Regards
Bhavesh

ERR:10003 Unexpected data store file exists for new data store

Similar Messages

Maybe you are looking for