Error : Undeleted archive files exist for FI_ACCPAYB

Hello,
A vendor was flagged for deletion by mistake. Now I need to remove this flag, but I cannot. I have the following error:
"Undeleted archive files exist for FI_ACCPAYB"
Can you help me?
I should probably delete the archive, but I do not know where I can find it.
Thank you in advance for your help!
Veronika

Hello Veronika
Are you sure which you told about Master Data Management?
As usually you cannot delete file if that file opening by some another application.
Regards
Kanstantsin _Chernichenka

Similar Messages

No configuration files exist for this connector?

I am trying to install Oracle Application Table connector for that I have copied the all files/directory into ConnectorDefaultDirectory but still getting following error.
No configuration files exist for this connector.
Ensure that valid configuration XML files exist in the configuration directory.
Any help?
thanks
TK

I have server/ConnectorDefaultDirectory and when I unzipped the TableResource zip inside ConnectorDefaultDirectory ...... it created following folders
1. configuration (This folder contains DatabaseApplicationTables-CI.xml)
2. documentation
3. lib
4. ProviderDefinitions
5. resources
6. targetsystems-lib
Can you please let me know what should be configuration file name?
I have downloaded these zip files from following location
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/connectors-101674.html
thanks for your help
TK

ERR:10003 Unexpected data store file exists for new data store

Our TimesTen application crashes and then it can not connect TimesTen datastore, and then we use ttIsql and get error "10003 Unexpected data store file exists for new data store".So we must rebuild the DataStore.
I guess the application damages the datastore because we use "direct-linked" mode. Is it true?
Should I use "Client-Server" mode if our data is very important?
thx!

Your question raises several important discussion points:
It is possible (though very unlikely in practice) for a C or C++ program operating in direct mode to damage the contents of the datastore e.g. by writing through an invalid memory pointer. In the 11+ years that TimesTen has existed as a commercial product we have so far never seen any support case where this was diagnosed as the cause of a problem. However, it is definitely a theoretical possibility and rigorous program testing and use of tools such as Purify is strongly recommended when developing in C or C++ in direct mode. Java programs running in direct mode are completely 'safe' unless they invoke non-Java code via JNI when a similar risk is present.
The reality is that most customers who use TimesTen in very high performance mission critical applications use mainly direct mode...
Note also that an application crashing should not cause any damage or corruption to a datastore, even if it is using direct mode, as Times%Ten contains explicit mechanisms to guard against this.
Your specific problem (error 10003) is nothing to do with the datastore being damaged. This error reflects a discrepancy between the instance main daemon's metedata about all the datastores that it is managing and the reality. This error occurs when the main daemon does not know about a datastore and yet when it comes to connect to (and hence create) the datastore it finds that checkpoint or log files already exist. The main daemon's metadata is managed solely by the main daemon and is completely separate from the datastore and datastore files (the default location is <tt_instance_install_directory>/info, though you can change this at install time). The ususal cause of this is that someone has been manually manipulating files within that directory (which of course you should never do) and has removed or renamed the .DBI file corresponding to the datastore.
This error should never arise under normal circumstances and certainly not just because some application has crashed.
Rather than simply switching to the (much slower) client/server mode I think we should try and understand why this error is occurring. Could you please post the following:
1. Output of ttVersion command
and then we can take it from there.
Thanks, Chris

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

XML log: Error during temp file creation for LOB Objects

Hi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
     at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
     at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
     at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AM

Hi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
     at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
     at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
     at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AM

Error message: No documentation exists for message V1096.

Hi Friends,
While monitoring the production system, got some cancelled transactions.
Error message: No documentation exists for message V1096.
For this I found one sap note 845599, but it's upto 5.0 , but we are using 6.0. please suggest me how to search?
if you provide solution for above message or alternative sap note, its very help ful for me
thanks in advance,
regards,
durga

Hello Durga,
IPlease apply the following note 845599 and 854744. Even these notes are up to 5.0, please review the source code.
Please make then the following correction in include program
LKAIPF2O :
call function 'SD_ORDER_CHECK'                            "326856
       exporting
            i_cobl          = p_cobl
            i_status_check = con_off
            I_NO_WARNUNG_V1096 = 'X'                 "<<<<< INSERT
These code correction should avoid the V1096 error / warning problem.
Another possible solution could be the following : please check if
you can remove the rejection code in the sales order item of the sales
order , which is reported in the job log.
Regards
Ruy Castro

Upload image in PA30 for a pernr getting error 'Either no file exists in the directory or the directory cannot be found'

Hi ,
I have uploaded image in AL11 and trying to link to thorough OA_UPLOAD_AND_LINK program. But when crosschecked it is existing there.
passed values in selection screen link below= >
while doing it an error is coming 'Either no file exists in the directory or the directory cannot be found'.
Directory is identified by program but file does not.
Any solution?
P.S. files are uploaded and saved in JPG format

Try to clear the flag "Processing in Front End", in this way the program will search for the file on application server and not from the front end.
Or select a file directly from your computer.
Regards.

1003 error:unexpected data store file exists for new data store

dear chris
when we use timesten, what happened cause the error 1003, I don't know what cause it happen. it works well before. but it happened today twice.
anyone know the reason ?? Any help is appreciated!
Thanks

The TimesTen daemon maintains a 'catalog' containing information about datastores that it is managing. From the daemon's perspective, a datastroe is uniquely identified by the pathname for the checkpoint files (the value of the DataStore attribute in a DSN definition). The daemon knows nothing about DSNs or ODBC.INI files...
A datastore is physically created, and hence registered with the instance daemon, the first time something connects to it specifying the ODBC/connection attribute AutoCreate=1 (which is the default value). From that point, the datastore has a physical existence (checkpoint and log files exist on disk), is known to the daemon and hence will appear in the output of the ttStatus command.
If at the time you connect to a datastore with AutoCreate=1 and the daemon has no record of the datastore it will try and create it. If it finds that the checkpoint files already exist in the specified location on disk then this is 'unexpected' (since the datastore should not exist yet) and error 1003 results.
Seems like you have somehow got some checkpoint files existing that the daemon does not know about. You have made some kind of mistake somewhere I guess; maybe you copied files around inadvertently?
Chris

BAPI Error: No account assignment exists for service line 0000000000

I am using BAPI : BAPI_PO_CREATE1 to create a PO.
I am getting this error while creating PO "No account assignment exists for service line 0000000000"
Please help.

Yes...
for each item i am creating one parent service record and one child service record with REQUISITION_SERVICES.
the Package no for parent is the subpackage no for child.
also for each item, I fill REQUISITION_ACCOUNT_ASSIGNMENT and REQUISITION_SRV_ACCASS_VALUES
Still I get the Error.
Thanks to help me resolve.

Error message: Multiple definitions exist for interface

Hi experts,
I am developing a scenario that involves a BPM, that receives a certain abstract interface, and sends out another abstract interface.
I have created a service interface for the result abstract interface.
I have tested the before BPM and it worked, but now it has stopped working.
In the java ui no errors are seen, and the BPM activates successfully, but in transaction SXI_CACHE the BPM is in status 99, and in the activation log there is a message saying: Multiple definitions exist for interface [Name of the result abstract interface].
I have tried activating the service interface, the BPM, and doing a delta cache refresh, but it didn't change.
What can I do to solve this problem?
Thanks in advance,
Gershon Osmolovski

Hi Gershon,
Try following thing, might help.
Go to ID and check which communication component you have created. Check if there is any other inactive version of it. If it is existing.Delete it.
Edit and activate the original Communication component and do cache refresh.

SAP Error "Trader does not exist for company code"

Good Day,
In SAP, we have multiple users in the role of trader. However, for one user, he keeps getting the message "Trade <name> does not exist for company code <code>" when he hits enter on the first screen of transaction TX01.
We have copied the profile of another user who is not getting that error, but still he keeps getting the error. What else should we check apart from the profile?
Thanks
VC

Thanks all, but i solved the problem.

Automator error when no files exist to move

I have a very simple automator script set up in Snow Leopard:
Find Video files in "Downloads" folder that are larger than 50 MB
Move those files to the "Files to Convert" folder
The script works perfectly when there are video files in the folder to convert, the problem is it throws an error when there are no files. I receive a "The action move finder items encountered an error" "The action move items was not supplied with the required data"
I can see why the script is failing but do not know how to tell it to ignore the error if no files are found.
Any thoughts?

Put a step in there to see if there are any files ≥50 MB. If not, quit the workflow. If so, continue. For AppleScript details, post to its forum under OS X Technologies or try the Automator forum under Mac OS X v10.5 Leopard
BTW. your profile shows Tiger and you've posted to the Snow Leopard forums. Please fix the discrepancy.

When downloading itunes updates, i get an error that reads file folder for itunes media has an invalid character

The error message read "file folder iTunes media has invalid character".

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error while adding file share for File Server role

I'm getting this error when trying to add a file share on a Server 2012 R2 failover cluster:
"Unable to retrieve all data needed to run the wizard. Error details: Cannot retrieve information from server. Error occurred during enumeration of SMB shares: WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote comptuers within the same
local subnet."
Despite the message, I can still create the share and it seems to work, but I'm concerned there may be an issue and I'd like to resolve it before putting the service into production. TIA!

Hi,
Your error often caused by the WinRM can’t communication to the others node, please confirm all the node “Windows Remote Management” service is running or try to disable your
firewall and AV soft then monitor it again.
More information:
WinRM (Windows Remote Management) Troubleshooting
http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
WINRM
http://blogs.msdn.com/b/powershell/archive/2007/10/30/winrm-exe.aspx
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

Error : Undeleted archive files exist for FI_ACCPAYB

Similar Messages

Maybe you are looking for