Erratic Clip Length Problems

Hi all
I am having REAL pains in the rear end with a project I am working on. For example, I will import a graphic file, allocate it a 5 second length, then place a 1 second transition either side, leaving the original clip with just 18 seconds left - as opposed to 3 seconds !!
This is a problem I have had on previous versions and on different machines, but I would have thought that by now Apple would have solved this issue
Does anyone have any insight into how to manage this, apart from throwing it all out of the window !!
Many thanks

Hi again eventproducer,
There is a bug in iMovie 5.0.2 (and some earlier versions) which only affects PAL projects, but this was fixed in iMovie HD 6 (not sure which version). As I recall, the bug first appeared after iMovie 2.
Transitions were rendered with an incorrect duration. For example, to achieve a rendered transition of 2 seconds duration, a setting of 1 second 17 frames had to be selected when choosing the transition. In essence, the rendered transition always appeared as a factor of 1.2 times the actual duration selected. See Matti Haveri's site:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_5_bugs.html#paltransitions
If you are still using a version prior to iMovie 6, this explanation may cover part of the problem. Having said that, in your situation, using 1 second transitions on a 5 second clip shouldn't reduce the clip duration to only 0.8 seconds. Under the scenario I've outlined, the duration would reduce to 2 seconds and 15 frames. So, I'm not sure what's going on!
Perhaps you could provide a fuller explanation as to how you are importing and rendering photos. For example, are you importing from the Photos pane within iMovie (ex iPhoto) or from a separate folder? Are you using Ken Burns to render, or is this feature switched off? Any extra information will be very helpful.
Thanks
John

Similar Messages

FCP timeline to Motion 3 "send to" clip length problem

I am having a problem with Motion 3 when I send a selected clip from an FCP timeline to a Motion Project (for some optical flow treatment)
It processes the entire source file associated with the clip- even if I have used a subclip to edit into the sequence in the first place- my source files are long so it takes several hours for a section only lasting a few seconds.
Is there a simple solution to this?
Thanks,
Andrew Parker

Thanks for these replies.
A bizarre design- making a nonsense of the integration from FCP sequence clip to Motion 3 for this treatment.
I'm hesitant to go to Motion 4 half way through a project- especially as there seem to be other teething problems from what I can gather on this forum.
I guess I could also re-ingest at short length those clips that I want to treat with optical flow blending- making it only a last stage process for all practical purposes.
Andrew

Compressor quality changes with clip length

Hello,
Im on a max OSX 10.6.5, compressor 3.5.3, FCP 7.0.3.
I am taking footage off the SONY XDCAM, running it through the XDCAM Transfer software and having it wrapped in quicktime so i can edit in FCP. The project was filmed in HD 1280x720, XDCAM HD422, 720p60(50 mb/s).
The destination is SD DVD.
Problem- Since going from HD to SD can be a bit tricky, I made a half dozen sample compression clips. I found that the compressor DVD 90min Best quality preset with a slight bitrate change to look the best. When I compress the 3 minute clip, it looks really great. But when I compress the entire sequence (only 83 minutes.. well within the 90 minute preset) it looks like garbage. The difference is night and day. What is the issue? suggestions?
Thanks,
Brian

Sorry for the slow reply, I hit the road for a while shortly after posting...but I'm back.
Also, I'm embarrassed to say that the problem turned out to be the nut holding the tool (in other words, user error). It doesn't matter how carefully one changes the clip length if you somehow forget that clicking on the clip then selecting "pasteover at playhead" does not paste the selected clip but pastes whatever is in memory. As I'm sure you can guess, the clip copied earlier was 3:12 in length.
Sheesh.
Sorry for the false alarm, and thanks to both of you for the help.

Subclips from Merged clips sync problem

Hi all,
I'm hoping someone has some insight into a problem I'm having. When I sync audio to my TK dailies, I usually go through the following steps:
1. Sync video clip and audio clip in the timeline.
2. Trim the ends so that I get rid of all the audio and video at the beginning and end I don't need.
3. Link audio and video.
4. Drag linked clips to browser, thus creating a merged clip. This clip will have the in and out I set in the timeline, but the media start and stop will be the original clips' lengths. Because this means I usually have a big long useless bunch of audio at the beginning with no picture, I like to get rid of this, so I:
5. Create a subclip from the merged clip in the browser. This creates a new clip with the media start and end at the point of the former merged clip's in and out. No extra media to clutter things up.
HOWEVER, for some reason this isn't working for me now. When I create the subclip, Final Cut does make the in and out points the new media start and stop times for each individual audio and video clip, but it syncs the clips randomly, so I have sound with no image, then a little random overlap, then image with no sound. If I drag this new subclip made from the merged clip to the timeline, I can unlink and relink to restore the proper sync, but obviously this is a huge pain.
This has never happened to me before, and I've used this method for a while, I THINK from before FCP 6. But right now I'm working on an FCP 5.1.4 again so perhaps it's just something that works in 6? Though I'm almost sure I did it before version 6 successfully.
Does anyone know what's up with this? Or have any ideas for another method to get to the same result? There probably is a better way to do this anyway!
Thanks,
Nayeli

Well, I spoke too soon. That DID turn out to be the problem for that one project, which was at 29.97 non drop frame in general, but for some reason the sound imports as drop frame (though the sound guy assures me it's non drop and all my setting are non drop).
However, I'm having the same problem now in a 24fps project, where I have audio at 48KHz with 24fps timecode and I did a reverse telecine on the original 16mm video. I noticed, however, that though the telecine had no audio, empty audio was captured, and it thinks this audio was at 48048 Hz. This remains even after the reverse telecine. Could this be the problem in this instance?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Clip length revert in themes

Hey all--
I'm an iMovie newbie with a question about themes. I'd like to use some of the theme elements, but whenever I drop in a clip it reverts to the original clip start point and doesn't retain any of my clip length edits. Do I need to prepare my clips differently or am I missing a setting or..? Any ideas?
Thanks for your help!
--Myrah
iMac 1.83Ghz Duo Mac OS X (10.4.6)

Welcome to the forum, Myrah.
You got it just about right; you're not missing something. There's a bug in themes that causes a clip placed in a Drop Zone to play from the beginning of the clip's FILE, not the beginning of the clip.
The trick is to export (share) only that clip to a Full Quality movie, then import THAT movie to the project and drop it in the Drop Zone.
To export (share) just one clip, check the "Share selected clips only" checkbox in the Share dialog window.
After the theme has been rendered you can discard the clip.
Karl

Clip length and Workflow with iPhoto (I need a pdf for a final...)

I'm feeling like a total lunkhead after taking a number of passes at this in the past year.
Short question:
How do I control clip length in iMovie? Does it work one way when you bring images in and another way when you bring in a slideshow?
Long question:
I need to get from images organized in iphoto to a pdf or ppt presentation and right now this means I am organizing the photos in iPhoto (a breeze), exporting as wmv and then importing this into iMovie. In iMovie I am just adding a title on the first "slide".
Now I am trying to make sure I have no dissolve effects between slides, make sure I can control the length of each slide and to get this exported into a "manually" advanced pdf.
At some point I would like to get some vector based linework into my presentations as well and for some reason I am bypassing Keynote in the above setup.
Can anyone help me get to a manual pdf so I can get out of the ditch here?
Thanks for any help.

It sounds like you've got a somewhat complicated issue.
I'm simply trying to create match a single image file with a 35:00 min podcast so I result in a movie that I can upload to Vimeo (they don't accept audio, only video). I'll watch your post to see if anyone can explain making still images longer (mine caps at 10:00 min).

Change default import clip length

Is there a way to change the default import clip lengths? It seems the default import length is 5 sec (00:05:00). So all photos import at 5 seconds. I would like to import all my photos to come in at 1 frame (00:00:01).

When you select a photo in the Photos Media pane, does not a "Photo Settings" window appear? You can drag the slider all the way out to 60 seconds if you like.

Imported clip length

I am using iMovie HD 6.03 to import Video 8 via a Canopus ADVC-55.
There seems to be a default imported clip length of just under 20 minutes.
I cannot find a way to adjust this, or a relative article in the iMovie help.
Can anybody advise?
Gordon

Clutha wrote:
.. There seems to be a default imported clip length of just under 20 minutes.
that indicates, you're trying to import to an ext. harddrive, which has the wrong 'format' (fat32=Windows...)
before using an ext. HDD for video processing, you have to use the DiskUtility and 'erase' (format) the mepty drive to hfs/Mac...

Clip Length

I am trying to make an animated movie. How can I make all my clip lengths, several hundred, the same length in one go? eg 0.1 of a second.

oldscotsbloke
From your prior posts, you appear to be working with Premiere Elements 12 on Windows 7 64 bit.
Are these clips - videos or stills? For now I will assume stills.
For now I will assume that you are set up for NTSC (30 frames per second) and not PAL (25 frames per second).
If you want all clips with duration of 0.1 second
a. import, take to Expert workspace Timeline, select all, right click anywhere in the selection, select Time Stretch, and set the Time Stretch dialog Duration field to 0.1 second which would be 3 frames. So you set the timecode Duration readout in the Time Stretch dialog to 00;00;00;03 (hours;minutes;seconds;frames).
or
b. BEFORE importing any, go to Edit Menu/Preferences/General and set the Still Image Duration to 3 frames.
Then AFTERWARD all stills imported into the program will have a duration of 3 seconds until you go back to preferences and change the setting.
Some Time Lapse information if needed
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
http://www.atr935.blogspot.com/2013/08/pe-numbered-stills-in-time-lapse-and.html
Please review and consider and then let me know if you are OK with the details above.
Thank you.
ATR

Photo clip lengths - trouble adjusting!

I have a new project consisting of 80-100 photos, all with a transition in between. Via Project Properties (Apple Key - J), I can set the photo duration but it's only in even increments -- 2 seconds, 3 seconds, 4 seconds, etc. I want to pick 2 1/2 seconds but the slider scale won't let me do that.
If I try to select just a photo properties (Apple Key - R) manually, from 2:00 to 2:50, it auto-adjusts it to 3:20. Having it set to that (or higher) makes the overall project runtime too long. Can I get it to something between 2 and 2 1/2 seconds??

There is an interplay between clip length or photo length and the length of transitions.
For example, if you have two photos each with length 4 seconds and 0 frames, and a transition between them of 30 frames (1 second), then each photo will have a length of 3 seconds and 15 frames. Note: this behavior can be changed in either Preferences or Project Properties: I can't remember which (this applies to clips).
Further, when you set the length of the photo to 2:50, you are really setting it to 2 seconds and 50 frames. In the NTSC system, one second is approximately 30 frames, so 50 frames yields 1 second and 20 frames ( or a total of 3 seconds and 20 frames, as you observed.)
Two and a half seconds in this notation would be 2:15.

Has the clip marker problem been resolved in Premiere cs6?

Has the clip marker problem been resolved in Premiere CS6. As of early July, it was not! Navigating, synchronizing clips seems impossible.

Explain your problems with markers in this feature request form: http://www.adobe.com/go/wish
Sorry, that's all I can offer you.
TrueFriction wrote:
I'd just like to add my voice to the chorus here - namely that Marker functionality for CS6 is extremely lacking, and has made my workflow for various tasks much longer and more tedious.
In my case I'm trying to match professional footage of a concert with audience-submitted cell phone footage. The pro footage can't be synced with the non-pro footage via Pluraleyes because the cell phone audio is way too high to be analyzed properly. Hence I need to manually sync, which I can't do efficiently because I can't put clip markers on the pro footage once it's synced in pluraleyes and sent back into Premiere, because it only exists in a sequence.
I have no idea why Adobe would remove a function used daily by its editors, one that was simple and reliable, for no reason.
And what's puzzling is that there's been not even an acknowledgement of the issue from anyone at Adobe for 8 months.
This doesn't make any sense. Usually customer service from Adobe is much better than this. Why no action on this one issue?
BTW, if you want to add Clip Markers to clips in the Timeline, you can set a keyboard shortcut for that.

Log & capture clip length

log and capture seems to arbitrarily determine the clip lengths for a longer piece of footage. each clip within a longer clips seems to vary between 2 seconds to 30 seconds. is there a way to make the clip length more uniform?
thanks

I do not understand. Please describe your workflow in more detail. What format material are you working with, etc.

Clip with problem

I'm doing an exercise for my students using Parallax, when using the Clipping Tool or propriendade Clip this problem happens, I wonder if I'm doing something wrong?
to see the video
Clipping Tool with problem - YouTube

basicaly, I got a clip that acts as a botton from which a menu drops. the idea is to get the clip to play as I pass over it with my mouse pointer and disapear as i leave the click zone. the clip is on my root and in the clip on my first frame I've put that script that I've posted earlier. it works fine for the scroll over, but it doesn't disapear once i leave the click zone.

Wrong clip length calculation

I only just noticed, but iMovie calculates clip lengths/ transition lengths wrong.
If you have two clips of 1 second, the total duration is 2 seconds. If you introduce a 10-frame transition, it reduces BOTH clips by 10 frames each, not 5 frames each. The total duration is now 1 second 15 frames.
I was making slideshows of a lot of images with cross dissolve transitions, and it is really noticeable.
This is a genuine bug, right? How does Apple get to hear about it and fix it?

If you take ten frames from the end of clip one, and ten frames from the beginning of clip two, that transition takes 20 frames.
No, you take the last 10 frames from clip one and play at the same time as the first 10 frames of clip two. At the beginning of the 10 frame transition you can see only clip 1 and at the end only clip 2.
Logically you should then reduce clip one by 10 frames, and clip 2 by 10 frames, leaving the project duration the same.
You can't do that without duplicating frames.
In the example I started with, I introduced a 10-frame transition and it reduced both clips by 10 frames, reducing the duration of the project.
Yes, that's how most transitions works.
But it shouldn't reduce the duration of the project by inserting a transition, should it?
It must, unless you duplicate frames. (The "Overlap" transition does just that.)
Take a look at:
http://geethree.com/slick/galleries/s1demopages/s1transbarnopen.html
You see that you must show frames from clip A and clip B at the same time.

Erratic Clip Length Problems

Similar Messages

Maybe you are looking for