Erratic scrolling on my iMac with alarm

My new iMac sometimes makes the sound of an alarm bell, the curser flashes and scrolling becomes erratic. When I try to scroll down it snaps back to the top. Has anyone had this before, if so what can I do to stop it happening?

I asked about the version because Apple decided to change the name of that app to "Contacts" in Mountain Lion. But, since you're on 10.6.8, it should still be Addressbook if my memory serves me correctly.
Did you check your hard drive (search for it)? Use either Spotlight or (my choice) Find any File (third party app). Since Mail uses the database of Addressbook, have to checked it to see if it can find some people's email address?
If you've checked all of that and since that is installed as part of the OS, the only thing I can think of is to download the 10.6.8 Combo installer from Apple's website and reinstall it over the top - it should re-create it.

Similar Messages

I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run on OSX, which is a bit alarming.

I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run under OSX, which is a bit alarming.

TRIM is supported on Apple-branded SSDs, but not third-party aftermarked SSDs.
Go to "About this Mac" > More Info > System Report > Serial-ATA > Trim Support

How to get batch recognition of (!) on some tracks after moving library from external hard drive to new iMac (with terabyte hard drive)?

I'm using Lion 10.7.2 and iTunes 10.5.2
I have moved my iTunes music from an external hard drive onto my new iMac (with a terabyte hard drive) with music folder organized - when I try to play some tracks I get the iTunes can't locate warning and so I follow through and show iTunes the track - they are all in the music folder on my iMac hard drive - they all copied over and they all appear in the iTunes library list - so far as I can tell out of a 500 gigabyte music collection - but there are so many giving me the error - many other tracks function as they should too, some work others don't - So I'm looking for a way to get all the error tracks fixed in a batch correction way. Doing this individually with each track just isn't realistic.
Can anyone suggest how I might fix this issue?
Also, after I show iTunes the song location and it plays, I get a find files prompt that looks like it wants to find other files, but that just causes the process to jam and I have to force quit iTunes and then it doesn't remember what I last showed it next time I open iTunes.
Also I'm trying to avoid the use of the consolidate function because that would copy a whole other set of music - not in iTunes - that is in the process of being edited (audio hijack pro and fission tools being used to put vinyl and tapes to mp3) But all that other music just means the consolodate function across my whole computer would be too much.

Some details seem to be coming into focus - I have started scrolling through the main library list A to Z repairing tracks individually (there are thousands, but it's what works so far) - as I work through, it appears the problem occurred on tracks where album artist metadata was different than song artist metadata, predominantly. I'm not sure that is 100% the case in every instance, but that is what it's looking like. I don't why that happened, must be some technical glich I guess.
Also, I tried running Doug's Scripts - the one titled, iTunes Track CPR v1.3 - it is supposed to fix exactly the kind of issue I'm having - I bet it would work for some people with a similar issue - but for my case it only identifies the 'de-linked' tracks and doesn't repair them - that is at least helpful as I scroll though to fix them - I can see exactly which tracks have the issue quickly after running that script - but iTunes doesn't remember that warning symbol after a log-out, so it's only worth running the script on a set of tracks I intend to review and fix in any given session at a time.
If you are interested, Doug's free scripts can be found at
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
there are other interesting and useful iTunes scripts there too...
also, unrelated to the issue I'm having, I found a lot of really useful and time saving metadata fixing free scripts at - hubi's iTunes scripts - the page isn't English, but the script download is easy to find -
hubi's scripts work for batch selections of tracks - so if you import an album and find the metadata screwed up somehow, you can select the whole set of screwed up tags at once (even across a series of albums), run the easy to use script, and watch it all be fixed automatically while you sit back and relax...
http://hubionmac.com/wordpress/category/softwareschmiede/applescripting/itunes/
just for reference, here is a sampling of what hubi's scripts can do...
there are other useful scripts out there - the tough part can be finding the one that helps you...
01-(un)capitalizes
01-(un)capitalizes
This script changes.... THIS TEXT into This Text... or this text
01-Delete spaces
Sometimes invisible blanks are behind an artist name or album name...this script deletes these blanks behind or infront of the strings
01-Delete x first-last chars. of Title
A Name like "01--Ray Of Light" will be changed to "Ray Of Light" and the01 will be entered in the tracks tracknumber id3 field =)
01-fix combined Artist-Title
Sometimes Tracknames look like:
"Madonna---Ray of Light" and in the artist field you see something like"Ripped by Me"... this script puts Madonna back to the right field... all youhave to do is to enter the right delimiter ("---" in this case)
01-switch Artist<->Title...
Switch ID3 field a with ID3 field b (not only Artist with Title any more =)!
01-z_filename ->Title
Sets the ID3 field Title to the track's filename)
01-z_trackNr-Filename->ID3
When a track's filename look like "01-Madonna-Ray of Light.mp3" andyou don't have the track's tracknumber stored in the ID3 Tag... this Scriptcan do this for your =)

My 2010 iMac with Mavericks 10.9.2 is very slow. How do I fix?

I have tried the usual stuff: disk permissions repair, SMC reset, PRAM reset, dragging caches to trash, restarting computer, etc. My internet connection and speed is good. Computer is mid-2010 i3 iMac with 10.9.2 OS, 12GB RAM, and there is plenty of unused space on my HDD.
The computer is very slow to start applications and load web pages. I ran Etresoft as some have suggested and the report is below. Any help is appreciated. Thanks.
Hardware Information:
          iMac (21.5-inch, Mid 2010)
          iMac - model: iMac11,2
          1 3.06 GHz Intel Core i3 CPU: 2 cores
          12 GB RAM
Video Information:
          ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:6:34
Disk Information:
          WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (172.87 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5680H
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
FireWire Information:
          Iomage HDD unknown_device 800mbit - 800mbit max
                    disk1s1 (disk1s1) <not mounted>: 32 KB
                    Time Machine (disk1s3) /Volumes/Time Machine: 1 TB (125.26 GB free)
Thunderbolt Information:
Startup Items:
          ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
          ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
          [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System] com.rosettastone.rosettastonedaemon.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] net.optimum.iptv.optimumapp.agent.v3.plist 3rd-Party support link
User Login Items:
          Microsoft Database Daemon
          Dropbox
Internet Plug-ins:
          DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 3rd-Party support link
          o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.2.1.11 3rd-Party support link
          OfficeLiveBrowserPlugin: Version: 12.3.2 3rd-Party support link
          PandoWebInst: Version: 1.0 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
          googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          InvisibleHand: Version: 3.9.37
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Citrix Online Plug-in 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Java 3rd-Party support link
          MacFUSE 3rd-Party support link
Old Applications:
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          TurboTax Premier 2011:          Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
          iSHS:          Version: 1.0 - SDK 10.0 3rd-Party support link
                    /Users/[redacted]/Downloads/iSHS.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 303.96 GB
          Destinations:
                    Iomega HDD [Local] (Last used)
                    Total size: 931.39 GB
                    Total number of backups: 147
                    Oldest backup: 2011-10-26 11:07:35 +0000
                    Last backup: 2014-03-12 00:53:28 +0000
                    Size of backup disk: Adequate
                              Backup size 931.39 GB > (Disk used 303.96 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          Google Chrome
               6%          WindowServer
               3%          mdworker32
               2%          EtreCheck
               1%          mds_stores
Top Processes by Memory:
          135 MB          com.apple.IconServicesAgent
          123 MB          PluginProcess
          123 MB          Safari
          111 MB          com.apple.WebKit.WebContent
          98 MB          mds_stores
Virtual Memory Information:
          9.28 GB          Free RAM
          1.66 GB          Active RAM
          303 MB          Inactive RAM
          783 MB          Wired RAM
          380 MB          Page-ins
          0 B          Page-outs

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

My new magic mouse will not scroll on my imac OS X 10.4.11 The mouse has new batteries and moves the pointer around the screen and clicks just fine. Any ideas??

My Magic mouse will not scroll on my imac using OS X 10.4.11 The mouse in new and has new batteries. It will right and left click, and moves around the screen well. Any ideas??

Minimum Requirements
A Bluetooth-enabled Macintosh computer
Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
Tiger can't utilise it's functions.

I installed Elements 9 on my MacBook . How do I reinstall on on an iMac (with no CD drive) ?

I installed Elements 9 on my MacBook . I have a multi license How do I reinstall on on an iMac (with no CD drive) ?

Jonahood if you bought a new Mac without an optical drive then you can copy the installation files onto a USB drive on a computer which does have an optical drive. You can then install on your new iMac from the USB drive.
Alternately you can download Photoshop Elements 9 by following the directions listed at http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml. Please make sure to complete the Very Important Instructions prior to scrolling down the page and clicking on the download link.

Frozen iMac with Spinning Wheel

Hi.
iMac Late 2012 OSX 10.9.2.
Fusion Drive 1TB Unused - lots of free space .
Not more then 5 Apps .
Lately when waking the imac from sleep , I have Frozen iMac with Spinning Wheel .
Please see the Console Report .
Any help will be appreciated .
Click to enlarge ...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Erratic scrolling of Swing scrn for jdk131

Hi,
While upgrading my Project from ibmjdk122 to ibmjdk131, I am facing problem with Erratic scrolling of Swing screens which scrolled fine for ibmjdk122.
I replaced registerKeyboardAction() method with getInputMap() and getActionMap().
As an action is used in new method getActionMap(), I created an action using AbstractAction as mentioned by Shannon Hickey.
The problem is AbstractAction is defining a method actionperformed(), which is already defined in the same class where I am using them.
Eventhough, it is compiling,while running, it is just hanging.
Any solution how to use the existing actionperformed() method to create the required Action for getActionMap()?
or is any other way to solve this problem?
the method registerKeyboardAction() is mentioned as obsolete in jdk131 documentation, hence I feel that cud be causing the above problem.
But shd an obsolete method compile if it is no longer functional ( it compiles OK for ibmjdk131) - If No.... what is the diff betn an obsolete method & depricated method.
Pls help.
Thanks in advance.
Krishna V

Hi @Rafi2014 ,
Welcome to the HP forum!
To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: Hp Probook 450.
You will need to select your correct model of HP 450 and follow the on screen prompts to display the support page.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

HT1386 I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068)

How do I use an external Monitor to access files on my iMac with a broken screen?

I have an 20 inch desktop iMac with a broken screen. It is the files on the computer that I wish to recover, after that, I can be on my merry way. Unfortunately, VileVault was on (Not my choice), and for some reason, when I target the disc image of the broken mac with a new one, ONE of the accounts "appears" to be completely empty. All of the accouts were running FileVault, but only one (mine) failed to be transferred because it is "empty". I refuse to believe that my files are actually all gone, because theoretically there should be nothing wrong with the CPU itself, just the screen.
Thus my goal is to use a monitor on my broken screen iMac and simply log in and access my files normally, and perhaps pull them out with a USB or something. I have a DELL monitor, and a DVI (The big hairy plug with screws I think) converter that works with my old iMac, along with the male/male DVI cord. However, when I hook it up, nothing happens. I have tried booting the old CPU while holding F7, and option as I read on a forum, and neither produced results.
Does anyone have any ideas on how to 1. Get the monitor to simply show what's going on on the mac? or 2. Pull out my files through some other means?
Thank you.

If you have a second Mac computer, you may want to try to copy over as many files you can. One way is to use target disk mode.
http://support.apple.com/kb/HT1661
http://lowendmac.com/misc/06/0710.html
You need to follow this procedure to recovering a filevault id. Mac OS X 10.3, 10.4: FileVault - How to verify or repair a home directory image ... http://support.apple.com/kb/HT2631?viewlocale=en_US
Robert

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

Howdy nzh50,
It sounds like you have a device associated in iTunes with your Apple ID that you would like to remove from your account. This article should help you out there:
iTunes Store: Associating a device or computer to your Apple ID
Removing an associated device or computer from an Apple ID
To remove a device or computer from your Apple ID:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Click the Remove button next to the device name you would like to unassociate.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Thank you for using Apple Support Communities.
Take care,
Sterling

Mid-2010 27" iMac with i5 - process for determine why slow

I have a mid-2010 27" iMac with an i5 processor and 12 GB of memory running latest Maverick OS. I mainly use the computer for email, web browsing, light weight spreadsheets and importing/organizing/sharing photos. I understand why my computer would be slow on startup (with reloading Safari pages, updating notifications, updating email, updating iMessage, etc.) but more and more often I see the spinning ball while using the computer. I have run though the basic steps of fixing permissions, etc. and would like to understand what is limiting my computer's performance. A few other things to note...
I have 12 GB of memory (the original 2 GB x 2 and I've added 4 GB x 2). I have heard that mixing memory isn't best.
My 1 Tb hard drive is at 80% capacity. I have heard that ideally this would be lower.
How do I determine what is causing my slowness? Is there a way of finding out which programs are demanding memory and by how much? I have read that my iMac can offically support 16 GB memory and unofficially support up to 32 GB. Not sure if 12 GB is a limiting factor or not. Just looking to get another year or so from this computer without getting frustrated watching the spinning ball. Would a fresh install of Marvericks and then reloading my personal stuff improve the situation?
Thanks in advance!

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

Erratic scrolling on my iMac with alarm

Similar Messages

Maybe you are looking for