Error 0x80070002 when Task Apply OS has "Access content directly from the distribution point" checked

When I check "Access content directly from the distribution point" for the "Apply Operating System" task in my OSD Task Sequence, I get the failed error 0x80070002 at the step when running the sequence from WinPE.
If I uncheck it, I don't get that error or have any problems.
I've ensured that in the properties of my OS Image in the Data Access that "Copy the content in this package to a package share on distribution points" is checked, and that I Updated DPs.
Am I missing any other settings?
The reason I'm trying to do this is because the "Download" speed of the WIM is incredibly slow. I already installed a hotfix (KB2905002) that fixed this for my Dell systems, but it's not speeding it up for another computer model I'm imaging in
the same way. The Dell computers, after I installed the server hotfix, will downloading the .wim file at 1% per second. However the HP thin clients I'm imaging download at about 1% every 15 seconds, and I'm not sure if that's due to their hardware or what.

Hi,
The error means file not found. So you need to check the smsts.log to see which DP it is accessing, then go to that DP to check the Shared Folder smspkg to make sure the file is there.
For the download performance issue, there are various reasons. You need to check your Switch bandiwidth and if the NIC driver is up to date. If downloading locally is slow, Accessing directly could be slow too.
Juke Chou
TechNet Community Support

Similar Messages

Unable to save Word documents when accessing them directly from the site because the document never converts from a read-only even though the User chooses to enable editing

Issue has only popped up recently and cannot reproduce in a Test environment. Unaware of any SharePoint changes, so hoping someone can point me in the correct direction.
Previously Word document did not have to be physically checked out, but rather the editing of the doc also checked out the doc in a document library. This is the way we want it to remain –
no manual check-out process. Now if a doc is edited without being checked-out, there is an issue with the process as the application thinks the doc is read-only (message received when trying to save the doc) even if enable editing is selected. The
following message appears when you try to save the document:
This message can appear if you have been editing a file that was opened as read-only. A file opened as read-only will have (Read-Only) appended to the file name as it appears in the title bar of Word. You can still save the document, but you must
save it by using a different file name. If you use Windows Explorer to change the read-only properties of the file, while the file is open in Word, it will not enable Word to save the file. Word must open a non-read-only version of the file in order to save
it by using its original file name. If you have not made any changes to the file, you can close it, and then use the following steps to make the file writeable. 1. Click the File tab, and then click Open. 2. Browse to the file and right-click it. 3. Click
Properties, and then clear the Read-Only check box. 4. Reopen the file. If you have made changes to a read-only file, you can save it, and then use the following steps to give the modified file the original file name. 1. Click the File tab, and then click
Save As. 2. Enter a different file name, and then click Save. 3. NOTE: Adding "Rev1", or "Mod1" to the original file name may help you to remember it later. 4. Click the File tab, and then click Close. 5. Open Windows Explorer. 6. Browse
to the original read-only file. 7. Rename the read-only file. 8. Browse to the new file. 9. Rename the new file to the name of the original file. Do not delete the read-only file until after you have determined you no longer need it.
Previously, when check-out was optional, a file was checked out automatically when someone opened it for editing, unless it was already checked out. The editing commands notified the User that the file is being/was checked out. The real issue is the
word doc can no longer be saved as the application still believes the doc is read-only.

Hi,
According to your description, you give the domain admin full control over files on the old file server, but you cannot move the files to the new file server. After pull the files from the old to the new file server, the domain admin can only read the files
on the new file server.
How did you move the files from the old file server to the new file server? Did you setup replication between the two file server or use robocopy?
Please check the files permissions on the new file server to see if the permissions are changed, then share the folder on the new file server to everyone to see the result.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a way to access images directly from the PSD

when i create images for my game i created
i usually build my PSD file like so via the groups and layers
G1
L1
L2
L3
G2
L1
L2
L3
G1 = GAME1
L# = Levels
each level there are 12 images within usually numbered 1-12
Level1
i would then setup my server the same way
domain.com/game/name of game/G1/L1/1.jpg
domain.com/game/name of game/G1/L1/2.jpg
domain.com/game/name of game/G1/L1/3.jpg
domain.com/game/name of game/G1/L1/4.jpg
domain.com/game/name of game/G1/L1/5.jpg
domain.com/game/name of game/G1/L1/6.jpg
domain.com/game/name of game/G1/L1/7.jpg
domain.com/game/name of game/G1/L1/8.jpg
domain.com/game/name of game/G1/L1/9.jpg
domain.com/game/name of game/G1/L1/10.jpg
domain.com/game/name of game/G1/L1/11.jpg
domain.com/game/name of game/G1/L1/12.jpg
Level2
domain.com/game/name of game/G1/L2/1.jpg
domain.com/game/name of game/G1/L2/2.jpg
domain.com/game/name of game/G1/L2/3.jpg
domain.com/game/name of game/G1/L2/4.jpg
domain.com/game/name of game/G1/L2/5.jpg
domain.com/game/name of game/G1/L2/6.jpg
domain.com/game/name of game/G1/L2/7.jpg
domain.com/game/name of game/G1/L2/8.jpg
domain.com/game/name of game/G1/L2/9.jpg
domain.com/game/name of game/G1/L2/10.jpg
domain.com/game/name of game/G1/L2/11.jpg
domain.com/game/name of game/G1/L2/12.jpg
Level3
you get the idea...
and so forth for
Game 2
Level1
Level2
Level3
can i just use some kind of code?
java or
another
to just access the PSD Layers directly without having to save and create all these folders on my server?

Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
You might have better luck posting in the Adobe Developer's Forum or the Adobe Photoshop Scripting forum.
Please don't ask me for links for those, as I'm sure you can google as fast or much faster than I can.

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

HT4914 When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

I get an error message when downloading ITunes :could not access the network location %public%\desktop\

I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
windows vista 32 bit

Try the following user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors

I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn't be completed. (com.apple.installer.pagecontroller error -1.)

I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.)
Pls help.

I bought HGTV home design software. It doesnt come w/ a installer disc, it gives you a link to dl the program. I did that and was left w/ a .mpkg file that I am unable to install do to the above msg.

TS3297 itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same

I just purchased itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same error message. Somebody has to have an answer to this.

Did you try setting itunes to run with administrator privileges?
Since I changed that I no longer have this issue

ITunes Match error: iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

I have just subscribed to iTunes Match, and get the above error message. I have signed out and signed in several times, and still get the same message. Can anyone help with a solution?

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

Every few hours I receive this error message:
"iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
Is there someone who knows how this could be solved?
[Update]
I see that there is already a discussion on this issue: https://discussions.apple.com/thread/3502994?start=0&tstart=0
Message was edited by: mickniepoth

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again.

this happens every week!!!
iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again.

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

ITunes Match on Windows 7 64 iTunes 10.5.2 64 - - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.

Windows 7 64 itunes 10.5.2 64 - I receive the following error message when opening iTunes - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.
When I try to sign out iTunes freezes and I need to shut down windows entirely to get it to open again.
Has anybody been able to resolve this issue?

After many annoying sign-in-out-iTunes-match-activation problems I found an easy solution for me. When the iTunes Cloud symbol is broken (and I should sign in again) I just deactivate my notebooks (Windows 7) Wifi (with Fn+F5 for my Thinkpad).Then I call up the Itunes store and iTunes tells my that there is no connection to the internet (most probaply this step is not necessesary). After manual re-activation of my Wifi iTunes seems to re-establish the connection and the Cloud symbol signalizes that iTunes match does work, again.
Hope, this helps.

Error Message when trying to play iPhoto video content.

I have set up Home Share between my Apple TV and my iMac, however, when I try to play video clips, I get an error message stating the video cannot be play, but to try again later. An icon of a yellow triangle with an exclamation mark inside appears.

I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

Error message: The message from - has not been downloaded from the server.

"The message from Doug Peets <[email protected]> concerning “Fires” has not been downloaded from the server. You need to take this account online in order to download it."
I get this error message several times per day, even on my Sent mail box, and Drafts, which clearly does not need to be downloaded (does it?). It usually happens when I switch mailboxes, from In to Sent, to Drafts and so on.
I have 100 Gigs of hard drive with 90 Gigs free. I have about 6,700 saved incoming e-mails and 4,700 sent e-mails.
TRhis has only started happening in the last couple months. How do i get rid of it? Is it because i have too many saved e-mails?
When I shut down Mail and re-open it, the messages display properly, but this is a nuisance several times per day.
Thanks,
Doug.

Thanks. I moved half of the messages to a new mailbox "old e-mails", then copied that to a new folder on my desk top, which saved it with a .mbox suffix, then emptied the Old e-mails mailbox in Mail. I will repeat this every three months.
So far, so good.
thanks for your help.
Doug Peets

HT201320 When I access my email from the iPhone, hit "inbox", the new messages appear briefly, but then just evaporate. I can't find them anywhere - not in inbox, not in junk, trash, saved - nowhere. Can anyone tell me what is happening?

When I access my email from the iPhone, new messages appear only briefly and then immediately disappear, before I do anything. Only old messages that were already in my inbox are visible. I can't find the new messages anywhere -- they have not moved to Saved, Junk, Trash, anything. IT is like the iPhone just ate them. Can anyone tell me what I am doing wrong?

If you have a POP3 account this means that another "client" email program has retrieved the messages and deleted the messages from the server. You need to change the server settings on that device to leave the messages on the server.
If you have an IMAP or MS Exchange account this means that someone read the messages on another device and either deleted them or moved them to another folder. Or there is an automated script that moved them to another folder.

Error 0x80070002 when Task Apply OS has "Access content directly from the distribution point" checked

Similar Messages

Maybe you are looking for