Error [0x8007007b] when backing up system state in windows backup for windows 2008 R2

running wbadmin system state results in the following error log:
Error in backup of C:\windows\\systemroot\ during enumerate: Error [0x8007007b] The filename, directory name, or volume label syntax is incorrect.
Having searched all over the web, the consensus seems to be that this error means that some service has a bad image path. I even sound a nifty powershell script that discovers services with possible problems. I fixed the problems it brought up in the registry
(there was only one), but I still get that error... I've been backwards and forwards through the list of services many times, and I don't see any problems.. Anybody got an idea??

Hi,
The issue cause by the following aspects:
1. The path incorrectly points to Windows\\systemroot\system32\drivers
2. Multiple SCSI controller drivers are being loaded at boot time and one or more is not needed. The failing SCSI controller driver is creating an issue for the WBAdmin/VSS backup process.
To resolve this issue, change the value in the registry key for
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LSI_SAS and change the Imagepath, from \SystemRoot\system32\drivers\lsi_sas.sys to System32\drivers\lsi_sas.sys
Note: After making above registry changes, the machine might not boot normally. Follow below mentioned steps to recover from the boot issue.
1. Boot the machine into Windows Recovery Environment (WinRE).
2. Open Regedit and navigate to each of the following registry keys to verify their Start values are correct.
HKLM\System\CurrentControlSet\service\LSI_FC
HKLM\System\CurrentControlSet\service\LSI_SAS
HKLM\System\CurrentControlSet\service\LSI_SAS2
HKLM\System\CurrentControlSet\service\LSI_SCSI
3. The Start value should be 0x3 for each driver that is NOT the SCSI controller driver determined earlier. Change the Start value as needed.
Values and meanings for the Start value:
0x0 = Load on boot
0x1 = System
0x2 = Auto Load
0x3 = Load on demand
0x4 = Disabled
4. Reboot the machine in normal mode.
5. Re-run the WBAdmin command, the backup should work correctly.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Error message when backing up with Deja Vu

Hi,
I am getting this error message when backing up with Deja Vu
symlink(/,/Volumes/Backup HD/Volumes/Server HD) failed at /usr/local/bin/psync line 240.
symlink(/var/clamav/.spamassassin,/Volumes/Backup HD/private/var/amavis/.spamassassin) failed at /usr/local/bin/psync line 240.
Below is the line 240 of /usr/local/bin/psync
symlink($slink, $dpath) or warn "symlink($slink,$dpath) failed"; ###js added $opt_a and warning
Anyone has an idea?
Cheers
Ben

The mail system can be backed up with mailbfr and the resulting backup subsequently with any decent backup software. mailbfr will make sure the mail system is stopped while backing up.
A server is always tricky to backup, because it is always in a "fluctuating" state. Ideally all services should be stopped before a backup. Some will not cause major issues, others like mail will. Unless you have some sort of raid setup, where you can take a disk offline for backup purposes, you will always have to be very careful.
I would look for service specific scripts on an as needed basis. There are some around for SQL for example.

Error message when backing up with time on external hard drive

I'm running 10.6.8 OSX & wondering why I get an error message when backing up with time machine onto an external hard drive. Please help! Error message states time machine could not back up & to try again later.

Says "The back up was not performed because an error occurred while copying files to the backup disk.
"The problem may be temoporary. Try again later to back up. If the problem persists, use Disk Utility to repair back up disk."

ERROR report when backing up of ipad

I get repeated error reports when backing ipad only when trying to update to ios 5. when I back up without update option it works fine
i have version 4.3.1 and want to update it.help!

Disable your security software and try again.

HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS

An error occurred when backing up this iPhone (-43).

An error occurred when backing up this iPhone (-43). Would you like to continue to update this iPhone? Continuing will result in the loss of all contents on this phone. Not risking going further till Apple explains why the bug and what if means?

Hey!!
After many failed attempts this is what worked for me:
Step 1. Right click on your phone in the left hand side bar and select Back Up
Step 2. Restore your phone and use the option where you restore and update
Step 3. When its done it will ask you to use the back up you previously completed
Hopefully this works for you!!!

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Im getting error 2 when tryig to download ITUNES with windows 7, you know what i can do?

Im getting error 2 when tryig to download ITUNES with windows 7, you know what i can do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Event IDs 136 and 137 0x80000000000000 in System Log on Windows 2008 R2 Server, Exchange 2010 in Cluster

Hi,
I'm having an issue with one of my exchange 2010 Servers. We had a power outage and upon recovery, I cannot start Services Net.Pipe Listener Adapter and Net.Tcp Listener Adapter (And thus cannot Start IIS and provide Exchange Client Services.) This is a
physical server (Not VMWare or Hyper-V)
The System event log has lots of Event 136's and 137s on Ntfs with the keyword - 0x80000000000000 - The General Messages are: The default transaction resource manager on volume C: encountered an error while starting and its metadata was
reset. The data contains the error code.
and
The default transaction resource manager on volume OS encountered a non-retryable error and could not start. The data contains the error code.
XML Output as follows:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="32772">136</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315532</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>C:</Data>
<Binary>1C00040002003000020000008800048000000000060019C000000000000000000000000000000000060019C0</Binary>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315531</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>OS</Data>
<Binary>1C0004000200300002000000890004C000000000020100C000000000000000000000000000000000020100C0</Binary>
</EventData>
</Event>
When I attempt to start the services - I get the following errors:
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
I have tried the "fsutil resource setautoreset true" fix without success.
Any ideas or direction would be much appreciated. Restoring this server will be extremely difficult.
Thanks!

We can close this question.
From an elevated prompt, I ran 'fsutil resource setautoreset true' and attempted to remove the files with .blf and regtrans-ms file extensions from C:\Windows\System32\config\TxR. but these files were locked by system processes. (They are also
tagged with the hidden file attrib so you may not see them at first)
So, I booted the system with a Windows 2008 R2 Install Disk, selected repair OS and selected the command prompt. I then performed a chkdsk /f c: and selected "Y" to unmount the drive. It made some repairs.
With the system booted from the install disk, and chkdsk executed, the locks were freed and I was able to delete the files from C:\Windows\System32\config\TxR.
Once the system rebooted, the services came back fine and everything was back to normal.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information.

When should the System State be explicitly backed up?

I'm trying to find out what is covered by the BMR and System State options in DPM 2012 R2. According to the below blog post BMR includes the System State. But what does the System State include? Would you ever need to back it up if you've included BMR
in the PG?
By default the BMR will protect the "critical system data" According to the Microsoft definition -> critical data = System State and C drive and all other drivers that contain system data directories (Program files).
http://scdpm.blogspot.co.uk/2011/11/bare-metal-recovery-bmr-option-in-dpm.html

Hi
Systemstate includes:
http://technet.microsoft.com/en-us/library/cc938537.aspx
BMR ist an additional Option which gives you the possibility to Recovery the Systemstate (which is included in BMR) on a different Hardware
See this:
http://blogs.technet.com/b/askcore/archive/2011/05/12/bare-metal-restore.aspx
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Error (-48) When Backing up /Users/~/Library/Preferences

I recently just tried to do a fresh from scratch Time Machine backup of one of my computers on a new hard drive I bought. However, I noticed that Time Machine would repeated stall out at around 12GB backed up and have to restart the backup from scratch.
From analyzing the console messages and logs, I noticed that Time Machine was having trouble backing up my /Users/~/Library/Preferences ("~" being a placeholder for the name of the account) folder. Specifically, any preference files or directories that were stored there that were not with the .plist extension generated Error (-48) messages in the console. Following those messages the backupd service (i.e., Time Machine) would SegFault and then crash (Console output is below).
The backup completes fine on its own if I exclude the Preferences folders for my user account. However, if I try to include it I get the same old results. Obviously, I have a lot of preference files (like MS Office) that I would like to back up so I am trying to find out (1) what a Error -48 actually menas and (2) what the problem with these preference files is and (3) is there anyway to get Time Machine to not freak out when it tries to copy them over.
Any help would be appreciated.
Sample Console Output:
9/11/08 2:33:02 AM
/System/Library/CoreServices/backupd[4965] Error: (-48) copying /Users/~/Library/Preferences/Macromedia to /Volumes/Backup of Comp/Backups.backupdb/Comp/2008-09-11-023136.inProgress/2568C5C9-05BA-4D68-82A7 -685E0EFFC02D/Hard Drive/Users/~/Library/Preferences
9/11/08 2:33:21 AM
/System/Library/CoreServices/backupd[4965] Error: (-48) copying /Users/~/Library/Preferences/Microsoft to /Volumes/Backup of Comp/Backups.backupdb/Comp/2008-09-11-023136.inProgress/2568C5C9-05BA-4D68-82A7 -685E0EFFC02D/Hard Drive/Users/~/Library/Preferences
9/11/08 2:33:22 AM
/System/Library/CoreServices/backupd[4965] Error: (-48) copying /Users/~/Library/Preferences/OfficeSync Prefs to /Volumes/Backup of Comp/Backups.backupdb/Comp/2008-09-11-023136.inProgress/2568C5C9-05BA-4D68-82A7 -685E0EFFC02D/Hard Drive/Users/~/Library/Preferences
9/11/08 2:33:22 AM
/System/Library/CoreServices/backupd[4965] Error: (-48) copying /Users/~/Library/Preferences/QuickTime Preferences to /Volumes/Backup of Comp/Backups.backupdb/Comp/2008-09-11-023136.inProgress/2568C5C9-05BA-4D68-82A7 -685E0EFFC02D/Hard Drive/Users/~/Library/Preferences
9/11/08 2:33:22 AM
/System/Library/CoreServices/backupd[4965] Error: (-48) copying /Users/~/Library/Preferences/Shockwave to /Volumes/Backup of Comp/Backups.backupdb/Comp/2008-09-11-023136.inProgress/2568C5C9-05BA-4D68-82A7 -685E0EFFC02D/Hard Drive/Users/~/Library/Preferences
9/11/08 2:33:35 AM
com.apple.launchd[1] (com.apple.backupd[4965]) Exited abnormally: Segmentation fault

From MacErrors.h (included with Xcode Tools:
dupFNErr = -48, /*duplicate filename (rename)*/
Use TM to restore everything except the Preferences folder, then manually copy it over.

Error -43 when backing up iPhone for update 5.0

I'm trying to update 5.0 on my iPhone 3gs and am getting error -43 when the phone is being backed up. Help! I waited a half a week hoping that the problem would go away, but it hasn't.
I've read that some other users have erased everything on their iPhone so that they could update, and then manually installed everything after, but I don't have half a day to spend on this.
Any ideas?

Well, I've since taken the plunge and tried to update anyway, by restoring the iPhone, thinking I could restore from my backups. Now turns out that I can't restore because "the backup session failed". Goddammit.
This is the biggest problem I have with my iPhone, that iTunes is such an abominable piece of software. I just want to get iOS 5 on this phone so I can leave iTunes behind.

Anyone getting error -43 when backing up phone?

After installing the new software, when backing my iphone an error continues to occur (error -43). Does anyone know how to solve this?

Hey!!
After many failed attempts this is what worked for me:
Step 1. Right click on your phone in the left hand side bar and select Back Up
Step 2. Restore your phone and use the option where you restore and update
Step 3. When its done it will ask you to use the back up you previously completed
Hopefully this works for you!!!

Constantly receiving Error -43 when backing up iPhone

When trying to upgrade my iPhone from 4.1 to 5 in iTunes 10.5 on my Windows 7 x64, the update process begins by trying to backup the iPhone. Every time it tries, however, it gets a small way into backing up the iPhone, it appears with the error box: "An error occurred while backing up this iPhone (-43)" and tells me that continuing will erase the phone. This happens every time.
Bizarrely, right-clicking the device in the navigation pane and choosing Back Up *seems* to work fine, but it is waaayyy too fast, so I dont think the backup is working properly.
I have enough hard drive space to store the entire device, so that shouldnt be a problem.
I dont want to have to Restore or Erase the device because it has a lot of information and I dont think the Backups are valid.
Anyone have any ideas?

Well, I've since taken the plunge and tried to update anyway, by restoring the iPhone, thinking I could restore from my backups. Now turns out that I can't restore because "the backup session failed". Goddammit.
This is the biggest problem I have with my iPhone, that iTunes is such an abominable piece of software. I just want to get iOS 5 on this phone so I can leave iTunes behind.

Error [0x8007007b] when backing up system state in windows backup for windows 2008 R2

Similar Messages

Maybe you are looking for