Error 1 during Build of exe

I have a program that I regularly build exe code from. In the recent few weeks I have seen increasing errors during build. Previously a save-all fixes the issue. The compiler complains of Error 1 for a random vi. The file identified changes and none the files have recently been updated. Using LabVIEW 2011 SP1 Professional. Did a full reinstall of the NI products, no help. Mass compile is no help. Relocating to C:\... to minimize path length is no help. Suggestions ? - thanks
LV message.......
Error 1 occurred at C:\Program Files\National Instruments\LabVIEW 2011\instr.lib\rscmwws\Utility\rscmwws Reset.vi
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @. ========================= NI-488: Command requires GPIB Controller to be Controller-In-Charge.
Solved!
Go to Solution.

I resolved the issue by setting the following build properties
- disconnect type definitions
- enable debugging
- unselect SRS
reference Forums Post - LabVIEW Build errors

Similar Messages

Error during building

hello,
i am trying to burn a dvd from idvd using professional encoding. twice at the end of burning (4 hours later) i get a message saying there has been an error during building (multiplexing?) i burned the same idvd project using high encoding and everything seemed to work ok. i want to try the pro encoding to see if there is a difference in quality.
another question... my project is in widescreen and looks great on my computer but in my dvd player, on my tv it's a bit stretched. why would this happen and can i fix or avoid it?
thanks for any advice
jean

Hi
Multiplex error is a very complex problem due to many things (long long list following) - on common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else converted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref file
8. Make a new iDVD project
9. Movies in project with same aspect ratio eg 4x3 or 16x9
10. No other programs/applications running during iDVD process. eg Internet, screen & energy savers
Yours Bengt W

Error during build application

Software - Labview 7.1 PDA and Labview DSC 7.1
OS - WIndows XP.
When I try to build application in Labview 7.1 I get following error
"Error 7 occured at Build Application. vi >> Disk Cmp setting to disk hier.vi >> Dist report Read Link Error.vi."
Can anyone had idea why this error had come.
Regards
Uttam

Hi,
Try mass compiling your VI once before building the EXE
Tools»Advanced»Mass Compile
this link will explain how to mass compile.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/aa97c01071d7cf678625695100582f40?O...
Hope this helps
Regards
Dev

Latest nightly sdk causes Java Heap error during build

The latest nightly sdk 4.0.0.13210 causes out of memory error in Flash Builder during a clean build. However the prior nightly build (4.0.0.13175) works fine. I'm using build 262635 of Flash Builder. What changed in the latest nightly that could cause this problem. I have over 10 modules associated with this project. Here is details of the error that Flash Builder reports:
An internal error occured during: "Build Project"
An internal error occurred during: "Build Project".
Java heap space

Here is the stack trace:
!ENTRY org.eclipse.core.jobs 4 2 2009-12-28 13:41:13.743
!MESSAGE An internal error occurred during: "Build Project".
!STACK 0
java.lang.OutOfMemoryError: Java heap space
    at flash.swf.builder.tags.DefineBitsLosslessBuilder.build(DefineBitsLosslessBuilder.java:33)
    at flex2.compiler.media.LosslessImageTranscoder.getImage(LosslessImageTranscoder.java:127)
    at flex2.compiler.media.ImageTranscoder.doTranscode(ImageTranscoder.java:67)
    at flex2.compiler.media.AbstractTranscoder.transcode(AbstractTranscoder.java:119)
    at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:221)
    at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:103)
    at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:360)
    at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:338)
    at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:98)
    at macromedia.asc.parser.ClassDefinitionNode.evaluate(ClassDefinitionNode.java:106)
    at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:349)
    at macromedia.asc.parser.StatementListNode.evaluate(StatementListNode.java:60)
    at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:934)
    at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:320)
    at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80)
    at flex2.compiler.as3.EmbedExtension.parse2(EmbedExtension.java:70)
    at flex2.compiler.as3.As3Compiler.parse2(As3Compiler.java:438)
    at flex2.compiler.mxml.ImplementationCompiler.parse2(ImplementationCompiler.java:280)
    at flex2.compiler.mxml.MxmlCompiler.parse2(MxmlCompiler.java:196)
    at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2935)
    at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2892)
    at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:460)
    at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274)
    at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496)
    at flex2.tools.oem.Application.compile(Application.java:1184)
    at flex2.tools.oem.Application.recompile(Application.java:1129)
    at flex2.tools.oem.Application.compile(Application.java:818)
    at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ModuleBuilder.build(ModuleBuilder.java:1 34)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)

Error during build

Hello
I am new in premier pro cs4 sdk. I give the following error when build the SDK_Custom_Importpipl & SDK_Custom_Import.cpp
Error 3 error LNK1104: cannot open file 'C:\Program Files\Adobe\Adobe Premiere Pro CS4\Plug-ins\Common\\CustomImporterSDK.prm' E:\snehal\Premiere Pro CS4 r1 SDK Win\Projects\SDK_Custom_Import\LINK SDK_Custom_Import
what is right solution for the above problem
please help me!!!!!!

You have to set an Environment variable called PREMSDKBUILDPATH:
On Windows, to specify where you want the built plug-ins to go, set a user environment variable (right-click My Computer > Properties > Advanced > Environment Variables > User variables) called PREMSDKBUILDPATH to the desired path (e.g. "C:\Program Files\Adobe\Common\Plug-ins\CSXX\MediaCore"), and re-log in so that the variable will be set. In the Visual Studio Property Pages for each SDK project, this path is the base path for the Output Directory.
Cheers,
Jaap

Itunes error during install - msiexec.exe

I'm trying to upgrade to teh newest version of iTunes so I can activate my iphone. During install I get an error message that states there was a problem with MSIEXEC.exe and it will have to be closed, and then asks me to send error report to windows xp. Im in desperate need of help - thanks to all in advance!

open internet explorer and go to the windows update page, you most likely need to update your authorization msi or your root certificates. I'd recomend just grabbing them all, then go for a long long long walk....

Encore Transcodes MPEG-2 Audio & Bitrate Error During Build

Encore transcodes the audio but the audio is already MPEG-2. The video and audio assets have following properties:
.mpv = 8.0 Mbit/s maximum (VBR 6-8 MB)
.mpa = 0.2 Mbit/s fixed
And during transcoding the error "Bitrate to High" stops the build process. Is there somewhere a limiter in action, or what is it?

Sir Wilkes...
Okay, I set the Bitrate to 9.4 Mbit/s, let's see if it works thru...
mpa:
The audio should be "MainConcept MPEG-Audio MPEG-1 Layer II-Audio" in stereo, however I have no program affirm that. The import works, I was just surprised that the audio gets transcoded, possibly to Dolby Digital. This company always delivers mpa's since they work with Avid. I have the video transcoded right there since the Avid 1x1 uncompressed quicktime codec does not work with any Adobe products, well, normally we do the Avid stuff on Mac but my boys are filming in London and Greenland so le chef has to do this one by himself.
This DVD is PAL.

Encore CS6 Blu-Ray "fatal error" during build

I have an external ble-ray drive that I just bought from OWC for my MacBook Pro. I have created a project for a wedding that has 3 sequences. Everything looks good, and the building/burning process gets about 90% done and I get this:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
I am new with Adobe, especially Encore. This is my third try with the same message. I tried building to Blu-Ray disc as well as Blu-Ray image. I have several couples waiting on a Blu-Ray disc for their wedding video, and I can't produce one! So frustrated!
Any help is MUCH appreciated!
Josh

ElCuso12 wrote:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
This is actually a very interesting error message. There are 4 blu-ray authoring programs that can display a error message that contains "video buffer underflows" when authoring a Blu-Ray with H.264.
These 4 blu-ray authoring programs are: Sony DVD Architect Studio, Sony DVD Architect Pro, Adobe Encore and Sonic Senarist BD.
Another interesting thing is also that the complete error message that is displayed by both Sony DVD Architect Studio and Sony DVD Architect Pro is exactly identical, word for word, with the error message that is displayed by Sonic Senarist BD.

Unidentified error during build

In Encore 2.0 the project fails building DVD folder with the message "unidentified error".
I remember finding a solution 3-4 months ago for the same problem in the forums, but now, with all my searches I got nothing. The solution was to date back the Windows calendar one month. Amazingly, at the date I was able to recover with that trick 2 projects and finalize them. Now I have the same error message, try changing back the calendar date in Windows one month, but no success in Encore to finish building without error.
Does anybody remember the details about the back-dating in Windows to stop this error message. It may be that I am not applying the scheme exactly.
Thanks

You have to set an Environment variable called PREMSDKBUILDPATH:
On Windows, to specify where you want the built plug-ins to go, set a user environment variable (right-click My Computer > Properties > Advanced > Environment Variables > User variables) called PREMSDKBUILDPATH to the desired path (e.g. "C:\Program Files\Adobe\Common\Plug-ins\CSXX\MediaCore"), and re-log in so that the variable will be set. In the Visual Studio Property Pages for each SDK project, this path is the base path for the Output Directory.
Cheers,
Jaap

MDFProdInfoList_Open.vi error during build

I get an error in MDFProdInfoList_Open.vi while doing a loader build in LabVIEW 8.5.

Hello,
What does the error message contain? Also what do you mean "doing a loader build"?
Regards,
Matt
Applications Engineer
National Instruments

Error during generation of the WSDL: BUILD FAILED java.lang.NoClassDefFoundError: com/sun/javadoc/Type

When I create an EJB Transport Business Service, after selecting the jar that has the EJB 2.1 artefacts (Remote, Home, etc) the oepe plugin fails and can't continue.
As I understand it seems that there is a problem with the classpath of ant build.xml that oepe creates inside folder /tmp/alsbejbtransport/ to compile the bs and generate the wsdl. I checked if tools.jar is in the classpath (in eclipse) and is included, so I can't figure out wich is the problem.
I found this in Oracle, but not helps solve the problem:
BEA-398120
Error: The WSDL for the typed transport endpoint could not be accessed.
Description
There was a problem retrieving the WSDL from the typed transport service endpoint at the time of service registration
Action
Contact technical support
This is the the full stacktrace that shows eclipse.
Generate : Error during generation of the WSDL:
BUILD FAILED
java.lang.NoClassDefFoundError: com/sun/javadoc/Type
        at com.bea.util.jam.provider.JamServiceFactoryImpl.createSourceBuilder(JamServiceFactoryImpl.java:205)
        at com.bea.util.jam.provider.JamServiceFactoryImpl.createBuilder(JamServiceFactoryImpl.java:158)
        at com.bea.util.jam.provider.JamServiceFactoryImpl.createClassLoader(JamServiceFactoryImpl.java:137)
        at com.bea.util.jam.provider.JamServiceFactoryImpl.createService(JamServiceFactoryImpl.java:78)
        at weblogic.wsee.util.JamUtil.parseSource(JamUtil.java:152)
        at weblogic.wsee.tools.anttasks.JwsLoader.loadJClasses(JwsLoader.java:186)
        at weblogic.wsee.tools.anttasks.JwsLoader.load(JwsLoader.java:75)
        at weblogic.wsee.tools.anttasks.JwsModule.loadWebServices(JwsModule.java:569)
        at weblogic.wsee.tools.anttasks.JwsModule.generate(JwsModule.java:369)
        at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:256)
        at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:184)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
        at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:357)
        at org.apache.tools.ant.Target.performTasks(Target.java:385)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
        at org.apache.tools.ant.Main.runBuild(Main.java:758)
        at org.apache.tools.ant.Main.startAnt(Main.java:217)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Caused by: java.lang.ClassNotFoundException: com.sun.javadoc.Type
        at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1400)
        at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1341)
        at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:1088)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        ... 27 more
Total time: 0 seconds
Eclipse Installation details:
*** System properties:
eclipse.application=org.eclipse.ui.ide.workbench
eclipse.buildId=M20110909-1335
eclipse.commands=-os
linux
-ws
gtk
-arch
x86_64
-showsplash
-launcher
{home}/Development/oepe-indigo/eclipse
-name
Eclipse
--launcher.library
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so
-startup
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher.overrideVmargs
-exitdata
1e418010
-vm
/usr/bin/java
eclipse.home.location=file:{home}/Development/oepe-indigo/
eclipse.launcher={home}/Development/oepe-indigo/eclipse
eclipse.launcher.name=Eclipse
[email protected]/../p2/
eclipse.p2.profile=PlatformProfile
eclipse.product=org.eclipse.platform.ide
eclipse.startTime=1374623921455
eclipse.vm=/usr/bin/java
eclipse.vmargs=-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3
-Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
-Dosb.home={home}/Oracle/Middleware/Oracle_OSB1
-Dosgi.bundlefile.limit=750
-Dosgi.nl=en_US
-Dmiddleware.home={home}/Oracle/Middleware
-jar
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
equinox.use.ds=true
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
guice.disable.misplaced.annotation.check=true
harvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
http.nonProxyHosts=localhost
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
java.class.version=50.0
java.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/endorsed
java.ext.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/ext:/usr/java/packages/lib/ext
java.home=/usr/lib/jvm/jdk1.6.0_45/jre
java.io.tmpdir=/tmp
java.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64/server:/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64:/usr/lib/jvm/jdk1.6.0_45/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
java.protocol.handler.pkgs=null|com.bea.wli.sb.resources.url|com.bea.wli.sb.resources.jca.upgrade.url|weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net|weblogic.net
java.runtime.name=Java(TM) SE Runtime Environment
java.runtime.version=1.6.0_45-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.6
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.6.0_45
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=20.45-b01
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
jna.platform.library.path=/usr/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/lib64:/usr/lib:/lib
line.separator=
middleware.home={home}/Oracle/Middleware
oracle.eclipse.tools.weblogic.ui.isWebLogicServer=true
org.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog
org.eclipse.equinox.launcher.splash.location={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
org.eclipse.equinox.simpleconfigurator.configUrl=file:org.eclipse.equinox.simpleconfigurator/bundles.info
org.eclipse.m2e.log.dir={home}/workspace/pragma/.metadata/.plugins/org.eclipse.m2e.logback.configuration
org.eclipse.update.reconcile=false
org.omg.CORBA.ORBClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.osgi.framework.executionenvironment=OSGi/Minimum-1.0,OSGi/Minimum-1.1,OSGi/Minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,JavaSE-1.6
org.osgi.framework.language=en
org.osgi.framework.os.name=Linux
org.osgi.framework.os.version=3.8.0
org.osgi.framework.processor=x86-64
org.osgi.framework.system.capabilities=osgi.ee; osgi.ee="OSGi/Minimum"; version:List<Version>="1.0, 1.1, 1.2",osgi.ee; osgi.ee="JavaSE"; version:List<Version>="1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6"
org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing,javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
org.osgi.framework.uuid=901615cd-f3f3-0012-11b6-a3bca4d97ac1
org.osgi.framework.vendor=Eclipse
org.osgi.framework.version=1.6.0
org.osgi.supports.framework.extension=true
org.osgi.supports.framework.fragment=true
org.osgi.supports.framework.requirebundle=true
os.arch=amd64
os.name=Linux
os.version=3.8.0-26-generic
osb.home={home}/Oracle/Middleware/Oracle_OSB1
osgi.arch=x86_64
osgi.bundlefile.limit=750
osgi.bundles=reference:file:javax.transaction_1.1.1.v201105210645.jar,reference:file:org.eclipse.equinox.simpleconfigurator_1.0.200.v20110502-1955.jar@1:start
osgi.bundles.defaultStartLevel=4
osgi.bundlestore={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/bundles
osgi.configuration.area=file:{home}/Development/oepe-indigo/configuration/
osgi.framework=file:{home}/Development/oepe-indigo/plugins/org.eclipse.osgi_3.7.1.R37x_v20110808-1106.jar
osgi.framework.extensions=reference:file:javax.transaction_1.1.1.v201105210645.jar
osgi.framework.shape=jar
osgi.framework.version=3.7.1.R37x_v20110808-1106
osgi.frameworkClassPath=., file:{home}/Development/oepe-indigo/plugins/javax.transaction_1.1.1.v201105210645.jar
osgi.install.area=file:{home}/Development/oepe-indigo/
osgi.instance.area=file:{home}/workspace/pragma/
osgi.instance.area.default=file:{home}/workspace/
osgi.logfile={home}/workspace/pragma/.metadata/.log
osgi.manifest.cache={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/manifests
osgi.nl=en_US
osgi.nl.user=en_US
osgi.os=linux
osgi.splashLocation={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
osgi.splashPath=platform:/base/plugins/org.eclipse.platform
osgi.syspath={home}/Development/oepe-indigo/plugins
osgi.tracefile={home}/workspace/pragma/.metadata/trace.log
osgi.ws=gtk
path.separator=:
securerandom.source=file:/dev/./urandom
socksNonProxyHost=localhost
sun.arch.data.model=64
sun.boot.class.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/resources.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/rt.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/sunrsasign.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jsse.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jce.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/charsets.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/modules/jdk.boot.jar:/usr/lib/jvm/jdk1.6.0_45/jre/classes
sun.boot.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64
sun.cpu.endian=little
sun.cpu.isalist=
sun.desktop=gnome
sun.io.unicode.encoding=UnicodeLittle
sun.java.command={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher {home}/Development/oepe-indigo/eclipse -name Eclipse --launcher.library {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so -startup {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.overrideVmargs -exitdata 1e418010 -vm /usr/bin/java -vmargs -Xms256m -Xmx768m -XX:MaxPermSize=512m -Dsun.lang.ClassLoader.allowArraySyntax=true -Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3 -Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester -Dosb.home={home}/Oracle/Middleware/Oracle_OSB1 -Dosgi.bundlefile.limit=750 -Dosgi.nl=en_US -Dmiddleware.home={home}/Oracle/Middleware -jar {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
sun.java.launcher=SUN_STANDARD
sun.jnu.encoding=UTF-8
sun.lang.ClassLoader.allowArraySyntax=true
sun.management.compiler=HotSpot 64-Bit Tiered Compilers
sun.os.patch.level=unknown
svnkit.http.methods=Basic
svnkit.library.gnome-keyring.enabled=false
user.country=AR
user.dir={home}/Development/oepe-indigo
user.home={home}
user.language=es
user.name={username}
user.timezone=America/Argentina/Buenos_Aires
weblogic.home={home}/Oracle/Middleware/wlserver_10.3
Thanks!!

run this one in command prompt and then convert the applet using converter tool
JC_HOME = C:\java_card_kit-2_2_2\bin\
set CLASSES=%JCHOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;
D:\NareshPalle\jcardRE\Smart\src>java -classpath %_CLASSES% com.sun.javacard.con
verter.Converter -out EXP JCA CAP -exportpath .\exp -applet 0x0a:0x00:0x00:0x00:0x0e:0x01:0x02:
0x03:0x04:0x05:0x06 PackageName appletName 0x01:0x02:0x03:0x04:0x05:0x0
6:0x07:0x08 1.0
or
go to following directory and run the converter tool in command prompt
step 1: cd C:\java_card_kit-2_2_2\bin\
then run this command under the above directory
step 2:converter -classdir E:\Pathof Your applet class file -out EXP JCA CAP -exportpath E:\path of exp files folder -applet AID PackageName AppletName PackAID major.minor no
For more doubts mail me....
*[removed by moderator]*
Thanks and Regards
NareshPalle
Edited by: EJP on 31/03/2012 20:09: removed your email address. Unless you like spam and unless you think these forums are provided for your personal benefit only, posting an email address here serves no useful purpose whatsoever.

Error in Build Application (EXE)

Hi,
There is an error is prompt as attached when I was trying to build the exe.
Both my Labview 2012 & Database toolkit are evaluation version.
I have no idea how to choose the different option as the error message mentioned.
Is there any alternative way to build the exe?
By the way, my PC still has the full activated version of Labview 8.5.1, can I get any assist from there?
Thanks.
Attachments:
Capture.JPG ‏51 KB

Hi tantan,
If you have activated 8.5 then why you are not using this for building exe ?
Any specific reason ?
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Getting error as pmd runs during build

An internal error occurred during: "add markers job".
Index: 0, Size: 0
get this alert sometimes during build.
with
pmd nature added
monitorize set
latest builder 4 (stand alone)
trunk flex sdk
latest version of PMD

It just happened.
I think it's kind of random but my last steps have been: run FlexPMD in a project, switched to another project and run it again.
Message:
An internal error occurred during: "add markers job".
Exception stack trace:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at com.adobe.ac.pmd.eclipse.flexpmd.utils.FlexPMDMarkerUtils$1.run(FlexPMDMarkerUtils.java:1 43)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Session data:
eclipse.buildId=M20090917-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=es_ES
Command-line arguments: -os win32 -ws win32 -arch x86
Regards,
Alex

Error (13) Building 8.2 .EXE

I get the following error when trying to build an .exe of my LabVIEW 8.2 object based program:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 13 occurred at Invoke Node in ABAPI Dist read linkages.vi->ABAPI Dist Cmp Settings to Disk Hier.vi->ABAPI Get Settings From File2.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Build_Invoke.vi->EBUIP_Build_Rule_Editor.vi->EBUIP_Item_OnDoProperties.vi->EBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File is not a resource file.
=========================
NI-488: Sharable board exclusively owned.
Method Name: Linker:Read Info From File
C:\Projects\LaserWireTransferLine\TransferLineApp\TransferLineApp.lvclass\TransferLineApp.ctl
Any idea what this is/ how to fix it?
TransferLineApp is an object. It has a cluster in for its private data, that cluster contains a single object. That object's private data is composed of strings, numbers, and a cluster array. The cluster has again base elements, strings/ numbers/booleans, etc, i.e. nothing to do with 488. I don't know how it can not be a resource file.

Came across this thread researching "Error 13 occurred at Invoke Node" while using Project Explorer to build an LLB.
[For me] the problem seems to be related to making the Destinations\"Support Directory" the same path as "Destination Directory" AND selecting "Destination Type" = LLB. Could be this implies copying DLLs and other dependencies into LLB(?)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

"application error" in LV8 when building an .exe .

Hi All
I am trying to build an .exe using LabView 8. I can generate a preview, fine, I can see all my files and where they will be, however
I click the build button to star building the application and the application starts build fine. I get messages like:
First "Initializing build"
Then "Preparing File", "Loading items to build", "updating libraries" and "Processing .............vi"
Suddenly just crash with the following error message pop up window:
"dwwin.exe - Application Error
The application failed to initialize properly(0X=0000142). Click on "OK" to terminate the application"
Does anyone knows what 's wrong??
Thank You Very Much in advanse

Togos,
Well at least you got it to build once. So even with the exact same settings you were unable to rebuild the EXE? That is certainly odd. Since you are able to build the example, we know that it is probably the VI that is being built that is causing the problem. I have a couple of suggestions for you at this point. The first is to try to create a new Build Specification and just use the default options to try to get the EXE to compile. Since you probably have already tried this, there is a more involved suggestion. This sounds like a very large VI, so I might suggest trying to whittle down the problem by deleting code and attempting to rebuild the EXE. Once you have deleted enough code, you will probably get down to a point where the VI will compile (hopefully before you reach an empty block diagram). At this point we can test to see if the recently deleted past of the VI will compile by itself to see if it is a specific code snippet that is causing this problem. As mentioned this is a lengthy and involved process, so before I tried this I might treat this as a VI corruption error, and try to copy and paste the Block Diagram from the problematic VI to a blank one to see if that makes any difference.
Let me know if any of that helps or if you have any other questions!
Andy F.
National Instruments

Error 1 during Build of exe

Similar Messages

Maybe you are looking for