Error: 1012004 Invalid member name [Forecast- Active]

Hi All,
I have a command that copies Forecast Pending to Forecast Active...
DATACOPY "Forecast"->"Pending" TO "Forecast"->"Active";
This validates and runs fine, except it is not recommended practice to use Datacopy on dense dimensions, a more effective solution is to use the equals command..
"Forecast"->"Active" = "Forecast"->"Pending"
However, this gives me the following error in essbase...
error: 1012004 Invalid member name [Forecast->Active]
can we not assign multidimensions on the left hand side of the equation?
Thanks,

TO do this the formula has to be in a member block. Try wrapping the data opt. Ommand in
in"forecast"(

Similar Messages

Validation Rule Error :Invalid Member Name In Lookup ({|0|}) value

We defined fdm validation rule as follows.
|Actual, April, 2010, YTD, ENTITY CURRENCY, Mumbai, TotalAssets, [NONE], [NONE], [NONE], [NONE], [NONE]|-|Actual, April, 2010, YTD, ENTITY CURRENCY, Mumbai, TotalLiabilities, [NONE], [NONE], [NONE], [NONE], [NONE]|= 0
After testing the above rule definition, it gives below error message.
Err = Invalid Member Name In Lookup ({|0|}) value in ID indicates invalid member)
Scenario: ACTUAL [1]
Year: 2010 [2010]
Period: APRIL [83886080]
View: YTD [2]
Entity: MUMBAI [7]
Parent Entity: MUMBAI [7]
Value: ENTITY CURRENCY [-1]
Account: TOTALASSETS [150]
ICP: [NONE] [-1]
C1: [MISSING_VALUE] [-1]
C2: [NONE] [0]
C3: [NONE] [0]
C4: [NONE] [0]
Lookup Error (2)
Err = Invalid Member Name In Lookup ({|0|}) value in ID indicates invalid member)
Scenario: ACTUAL [1]
Year: 2010 [2010]
Period: APRIL [83886080]
View: YTD [2]
Entity: MUMBAI [7]
Parent Entity: MUMBAI [7]
Value: ENTITY CURRENCY [-1]
Account: TOTALLIABILITIES [-1]
ICP: [NONE] [-1]
C1: [MISSING_VALUE] [-1]
C2: [NONE] [0]
C3: [NONE] [0]
C4: [NONE] [0]
Also we could see in the Expression after lookup substitution (scratch pad): we are getting 0-0=0.
Please provide you inputs.

I have not looked closely, but C1 is showing as "Missing Value". Have you checked to see if [None] is a valid member for the account you have selected (TotalLiabilities)?

BPC Office Client Error : "Invalid member name"

Hi,
we loaded data via SAP BI to our BPC generated cube, filling the category type dimension with a constant (V00) for identifying the actuals. Now when I try to run a report on the application via BPC Office Client, and I set the current view for the category type dimension to the constant 'V00', I receive an error message with says "Invalid member name" . However the member was manually added in the masterdata via the BPC Admin Console. Does anyone have an idea what causes this error ?

It doesn't seems the process of dimension was working.
So I suggest to process again that dimension from Admin console and after that into client side just do refresh dimension members.
This should take away your error.
Kind Regards
Sorin

Invalid member name [H] -2147218908 during incremental refreshes

Hello,
We're running an incremental refresh in Planning Desktop (9.2.0.2) but it errors out with: Invalid member name [H] -2147218908
The Essbase log file mentions the same. Has anybody run in to this? I'm not sure where to look. Everything seems to be working fine.
Essbase 9.2.0.2 on AIX
Planning 9.2.0.2 on Windows 2003 R2

Running into the same error. Going to run a full refresh, and will let you know my results

When Import get Error-00904 Invalid Column Name

Hi all,
I'm using DI Premium 3.0 with Oracle 10.2.0.1.0 repository. I'm trying to connect Oracle 8.1.4.7.1 (8i) but when i going to import tables get Error-00904 Invalid Column Name. If i connect to Oracle 10.2.0.4.0 don't get error.
Trying from DI XI R2 (11.7) with Oracle 10.2.0.2.0 repository, to connect Oracle 8.1.4.7.1 (8i) don´t get error!
Is error from Oracle repository version?
Thanks in advance.
Jorge

Hi Manoj,
This is the output:
SQL> desc all_tab_columns
Name                                      Null?    Type
OWNER                                      NOT NULL      VARCHAR2(30)
TABLE_NAME                             NOT NULL      VARCHAR2(30)
COLUMN_NAME                          NOT NULL      VARCHAR2(30)
DATA_TYPE                                           VARCHAR2(106)
DATA_TYPE_MOD                                           VARCHAR2(3)
DATA_TYPE_OWNER                                         VARCHAR2(30)
DATA_LENGTH                           NOT NULL      NUMBER
DATA_PRECISION                                          NUMBER
DATA_SCALE                                                   NUMBER
NULLABLE                                                     VARCHAR2(1)
COLUMN_ID                                 NOT NULL      NUMBER
DEFAULT_LENGTH                                          NUMBER
DATA_DEFAULT                                            LONG
NUM_DISTINCT                                                 NUMBER
LOW_VALUE                                                    RAW(32)
HIGH_VALUE                                                   RAW(32)
DENSITY                                                      NUMBER
NUM_NULLS                                                    NUMBER
NUM_BUCKETS                                             NUMBER
LAST_ANALYZED                                           DATE
SAMPLE_SIZE                                                  NUMBER
CHARACTER_SET_NAME                                    VARCHAR2(44)
CHAR_COL_DECL_LENGTH                                 NUMBER
GLOBAL_STATS                                            VARCHAR2(3)
USER_STATS                                                   VARCHAR2(3)
AVG_COL_LEN                                             NUMBER
Thanks for your help.
Jorge

The error: "Oracle Error 904 / Invalid Column name"

When I try to take the Oracle Backup with the Exp command. I got the following error.
The error: "Oracle Error 904 / Invalid Column name" .
Any solution or suggestion?????????

Asif, to add another question to the list of things to check. Is the version of the exp utility you are using to perform the export operation the same version as the database? If not, that would explain the error.
If you are trying to export using a newer version of the export utility that generally will not work. You should switch to using the db version.
If you are exporting using an older version because the target is an older version then usually you need to run the catexp# where # is the version number script for the target version that Oracle provides in the $ORACLE_HOME/rdbms/admin directory.
HTH -- Mark D Powell --

SAINT import of TU/SPS gets error 207 Invalid Column name 'area'

Hi,
I have installed a EHP5 ECC 6 system, Windows 2008 SQLServer 2008R2. Have used SolMan MaintOpz to download the additional Technical Usages (TU) like HCM and SPS to be imported into the system using transaction SAINT.
I am using the stack.xml file for the Saint import.
IMPORT phase have completed, but now I am getting an SQL error 207 duing the XPRA_EXECUTION phase when doing method execution. This stops the SAINT import and when I click on Continue button i will et the same error and SAINT will stop again.
The error is for the support package SAPKB70204 Basis Support Package 04 for 7.02.
The return code for method execution is RC 8.
When I check the log file, the errors are
SQL Error 207 Invalid colun name 'area'
Errors occurred during post-handling MSS_SDBP_AFTER_IMP for SDBP L
The error affects the following components: BC-DB-MSS
Further analysis find that it is trying to run a SQL script and the script fails due to the above error.
I read the script, it contains statements to create a table with a field name 'area' and select statements to this table.
I have tried patching the SAPEXE and SAPEXEDB kernels to the latest but still the same error. Already on the latest kernel level and dbmssslib.dll and tp and r3load and r3trans files due to the patch.
Without fixing this error, my SAINT import will never complete and I will not have a functioning ERP system. The entire team is waiting for me so plese can anyone help me? I am desperate.
Thank you for any advise or help.

Check
Note 769842 - SQL errors occur in XPRAS_UPG phase
Markus

Error 90020302: Invalid last name. Exam Registration

Hi there, this is my first time trying to register for a MSCA Certification Exam, and before getting to Pearson VUE, there's a Microsoft "Register for your exam" page, that is giving me an error "Error 90020302: Invalid last name.", once
I've completed all required data. My last name is González, so i thought, maybe the letter "á" is giving trouble, so I tried Gonzalez as well, but with no different results. Can someone help me? Thanks!

Hi,
You can contact your local Microsoft support center for help with the registration process:
https://www.microsoft.com/learning/en-us/help.aspx
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
Danny van Dam

Adding dim property - Error processing (Invalid column name)

BPC 5.1 SP3
I'm trying to add FormulaH1 and FormulaH2 properties to a user-defined dim containing two hierarchies. Properties are added and processed without any issues. However, when I subsequently try to process the member sheet, which has two new columns ("FormulaH1" and "FormulaH2"), I receive this error:
- Error occurs during UpdateRemainData. Invalid column name 'formula13'.
Column 13 in the member sheet contains the new "FormulaH2" property. (Column 12 has the "FormulaH1" property).
Any ideas what might be causing this error? I do see the new columns added to the mbr table. I've tried changing the property lengths and "In App" settings---get the same error when processing the member sheet.
Are there issues with added Formula properties to a user-def dim? Or, is there something else going on here?

Answered my own question....
I only need to add one property called "Formula". BPC will then add the H1 and H2 "property" columns in the member sheet.

Invalid Member names

Is there a list of special characters that Essbase does not like in the outline. We are getting kickouts for a member starting with the "(" character.

Characters that are invalid at the beginning of a name:@ \ { } , - = < ( ) . + ' _ |For additional rules check under Rules for Naming Dimensions and Members in the DBAG

Invalid column name while loading member error in EIS

we have changed the sort_order_01 column as LEVEL01_SORT_ORDER in SQL server view, but it is not reflecting in EIS during member load, however we added manually LEVEL01_SORT_ORDER in table properties of dimension member, but it is not reflecting in EIS, it is poping the error as:Invalid column name "sort_order_01".
hi techies kindly throw some light on this

we have done the same, even then it is not reflecting in OLAP model and Meta Outline.Problem is whether in the sql server or in the EIS ..
Please suggest & help me out.
sunil

Member name contain invalid character '&'

Hi,
I am trying to deploy the HFM application in EPMA 11.1.2.1 and am getting the below error..
"Member Name 'XXXX&xxxx' contains invalid character '&'"
I thought member names support '&' character?
Any idea?
Thanks in advance!
PM

Looks like they have a catch-all down further in the HFM admin guide:
Loading Metadata_
When you load a metadata file, Financial Management replaces metadata with new metadata
from the load file. Replacement is useful for making minor changes to the metadata, such as
adding an account. For example, if your application includes a North America entity and you
load entities from a metadata file, the attributes for the North America entity in the file replace
the attributes for the North America entity in the application.
Note: Do not use the ampersand ( & ) character in a metadata file. If you do, an error occurs.
Loading large metadata files on the Web can result in a proxy timeout error. If this occurs,
increase the Web proxy timeout setting or use the Win32 client to load the file.

"Invalid Field Name" Error message on Client System

Hi all,
I have installed some addons on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
Regards,
Rohan S. Kamble.

Hi Rohan,
Are you sure you have the same version of DI (also addon) on your client and your server side?
Reinstall the addon on your client, check if the problem still happens.
Regards,
Jay.

XID protocol error , sense 08910005 invalid CP name

I am trying to set up APPC LU62 connection between 2 Micro Focus enterprise server PCs. I have HIS 2010 server and client installed on each of the 2 PCs. An IP-DLC link was created and a peer to peer connection was defined using the SNA manager. However
I am getting a failure on the connection. The event viewer shows XID protocol error 08910005 invalid CP name. The CP name was showing all zeros in the event viewer.
Both servers have the same NETID 'MFNET' and CP name of 'MFCP'
I also tried with one server with CP name MFCP and one with MFCP1. But the same error.
This is the first time I am using HIS. Most of the examples are showing connection to Host. But I am doing a peer to peer connection. I may have missed something in my configuration. Can anyone help ?

The IP-DLC link service was implemented to integrate with IBM Enterprise Extender on IBM mainframes and iSeries (AS/400s) systems. While HIS Servers using IP-DLC can communicate with each other via IP-DLC, they need to do so through a Network Node Server
(NNS). For example, our internal mainframe is a NNS, so I can have two HIS Servers using IP-DLC configured to connect to the NNS and I can enable APPC communication between the two HIS Servers. I cannot do this directly without an NNS.
Using DLC to connect HIS Servers has and can be done, but not with current versions. The DLC protocol and the 802.2 DLC link service have been removed from HIS starting with HIS 2010. HIS 2009 is the last version that supports DLC and this is only on 32-bit
systems because a 64-bit version of DLC never existed. The last 32-bit Windows Server version is Windows Server 2008 (not R2). Since you have HIS 2010, you don't have an option to try DLC. If you were to try HIS 2009, you would need to make sure the MFES servers
are running on 32-bit operating systems.
Have you checked with MicroFocus to see if they have any options to meet your needs?
I have worked with customers using MicroFocus with HIS, but they were communicating with IBM mainframes or AS/400s.
Thanks...
Stephen Jackson - MSFT

Invalid column name in IMGSimilar

Hi all,
I have a question for the function IMGSimilar.
I have a table musterbildsig, in which the generated signatures of 100 pictures are stored in the column msbild_sig. Each Signature in this table is to compare with all signatures in the column bild_signature of the table bildtable_intern_signature.
I use the following java code.
OracleResultSet rs_mbsig = (OracleResultSet) stmt.executeQuery("SELECT * FROM musterbildsig");
while (rs_mbsig.next()){
OrdImageSignature mbsig = (OrdImageSignature) rs_mbsig.getCustomDatum(2, OrdImageSignature.getFactory());
String str = "SELECT bsig.bild_id, ORDSYS.IMGScore(1) AS Score FROM bildtable_intern_signature bsig WHERE ORDSYS.IMGSimilar(bsig.bild_signature, mbsig, 'color=\"0,7\" texture=\"0,5\" location=\"0,1\"', (float)th, 1) = 1 ORDER BY Score asc";
OracleResultSet rs = (OracleResultSet) stmt.executeQuery(str);
But i get the error message: invalid column name.
I think, mbsig is wrong. But i don't know, how can i correct that?
Please help!
Thank you very much and greeting from germany!
rabbit

Hi,
I think you aren't able to use "mbsig" directly in your query string. Instead you should substitute it with "?" as follows.
String str = "SELECT bsig.bild_id, ORDSYS.IMGScore(1) AS Score FROM bildtable_intern_signature bsig WHERE ORDSYS.IMGSimilar(bsig.bild_signature, ?, 'color=\"0,7\" texture=\"0,5\" location=\"0,1\"', (float)th, 1) = 1 ORDER BY Score asc";
After you have to declare, what "?" is by:
OraclePreparedStatement stmt = (OraclePreparedStatement)conn.prepareStatement(str);
stmt.setCustomDatum(1, mbsig);
Now you can retrieve data with:
OracleResultSet rs = (OracleResultSet) stmt.executeQuery();
I hope it helps.
greetings from germany :)
Christian

Error: 1012004 Invalid member name [Forecast- Active]

Similar Messages

Maybe you are looking for