Error 10123 Invalid paramID used

Hello,
I am using ComponentWorks to create a buffered event counting application in Visual Basic.
When configuring the counter to be gated on a PFI line, I get the following error: "error 10123: configuring gate properties, invalid paramID used".
I would like to use PFI31 as a gate for counter 2, and my code is posted below.
Can you help, please?
Thank you
CWCounter.Device = 1
CWCounter.NMeasurements = N
CWCounter.BufferMode = cwctrContinuous
CWCounter.GateSource = cwctrPFIGS
CWCounter.GateSignal = 31
CWCounter.Counter = 2

Apparently, it's the driver. In general, DAQmx makes it easier to route timing signals, handling more of the grunt-work behind the scenes. It also has extended the range of routings allowed, such as the case you've discovered.
An old trick I used to use in traditional NI-DAQ was to explicitly route a signal up onto a RTSI line and then configure my task to use that RTSI line as a Source or Gate or whatever. When I did it, I was typically routing a pulse train output or an analog sample clock signal. I'm not certain, but there *may* be a way for you to do such a routing from PFI to RTSI even on an input pin. I recall that this indirect routing allowed me to program some things I couldn't have routed directly, but I'm not sure if I ever routed an input PFI to RTSI. I can only vouch for routing counter outputs.
If you explore your device under MAX, there's a tab or menu option somewhere to define valid and invalid routing combos.
-Kevin P.

Similar Messages

I'm trying to timestamp (RFC 3161) a pdf using my own timestamp server hardware but always get an error: "Certificate invalid for use" ...

I'm trying to timestamp (RFC 3161) a pdf using my own timestamp server hardware but always get an error: "Certificate invalid for use" (Original text - pt_BR:O certificado não é válido para uso). How can I get more info on what I'm missing or whats wrong with the certificate?

Which Acrobat version are you using? Do you use "Document Timestamp" command? If so, do you get this error during the signing process and the signature is not created or signature is created and you get this error when it is validated? If the latter you can open signature properties, click on the "Advanced Properties" and in the next dialog on timestamp's "Show Certificate". If you get this error during the signing process do you get an alert that shows some cryptic info with a number? If you do provide the content of this alert.
Also which Acrobat version (including minor) are you using?

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

Hi Lawrence,
Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

Order Import failing with error "The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory."

Hi All,
I am getting this error while importing an internal sales order.
“The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory.”
I have tried to set mentioned profile as ‘Yes’. But still getting same error.
Also, provided subinventory is present and active in given inventory organization.
Please share if anybody encountered this before and have a solution.

Hi 2878342
Please refer the following metalink note, it should resolve your problem.
Order Import Interface.Error Message Specified Subinventory Is Invalid To Use (Doc ID 406411.1)

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

Error 1603 - key invalid for use in specified stat...

cannot use skype, cannot re-install Skype
get: error 1603
and window stating: key invalid for use in specified state
Skype was working fine up to yesterday (Sept 15 2014)

ruwim escribió:
Try to uninstall Windows Security update KB2918614.
http://community.skype.com/t5/Windows-desktop-client/Error-Key-not-valid-for-use-in-specified-state/...
I personally whould not recommend that, because uninstalling the update KB2918614 places the Windows Installer service back to its original design, but also leaves it vulnerable to the reported security issue https://technet.microsoft.com/library/security/MS14-049
more info about this here: http://windowsitpro.com/security/bug-or-feature-kb2918614-alters-windows-installer-behavior
so, the right way to solve this this, is fixing user credentials and permissions, that could be corrupted by a virus.
1 - Reset File Permissions: http://www.tweaking.com/content/page/reset_file_permissions.html
2 - Reset Registry Permissions: http://www.tweaking.com/content/page/reset_registry_permissions.html
3 - Repair MSI (Windows Installer): http://www.tweaking.com/content/page/repair_msi_windows_installer.html
after that, you can try uninstall KB2918614 and then install KB2918614 again from Windows Update in Control Panel.

Error invalid date using delete_filter_exp in Ikm knowledege module netez

i created the a,b,final-r-interfaces in ORACLE DATA INTIGRATER(ODI).pkg level these three interfaces are executed successfully in developement.
when i executed the final-that r-interface alone in development then it shows the error (i.e.invalid date)
Note i am using the delete_filter_exp in Ikm knowledege module netezza control append i am using this conditon in this delete_filter_exp in Ikm knowledege module netezza control append (HIST_CREATION_DATE>= TO_DATE(substr('#D_abc_vb_O_LINES_HISTORY_RK',1,19) ,'MM/DD/YYYY HH24:MI:SS') AND SOURCE_ID=3)
I am getting the error as .invalid date.
Regards,
Venkat

hi,
the data types like typ_s_ressource are defined.
they are declared in the include LZTPGTOP.
The declaration of typ_s_ressource is:
types: begin of typ_s_ressource,
        perno type hrsobid-sobid,
        org_unit type objid,
        position type hrsobid-sobid,
        leadpos type c,
       end of typ_s_ressource.
If u have any questions, you can ask me, but try to provide a solution.
Thanks,
Srinivas.

Invalid Gift Unable to gift an item using iPhone 5s and iPad air, Error Message Invalid Gift. You must enter a valid recipient email address.

This has been going on for quite a while. I am able to send/purchase gifts from my iMac however; when I attempt to purchase a gift on my iPhone 5s (iOS 7.0.4) or my iPad Air (iOS 7.0.4 ) i get the following error message:
Invalid Gift
You must enter a valid recipient email address.
This happens no matter what email address I type in. Once this message comes up you can only select "OK". It never let's me finish my purchase.
Any ideas?

Hi there jphilyaw,
You may find the information in the article below helpful.
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
-Griff W.

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error : CGImageCreate: invalid image colorspace: NULL.

Hi,
I am unable to launch Intellij IDEA from command line using ./idea.sh on my Mac (OS 10.7.4). The intellij IDEA flash screen comes up after which I am seeing the following error and the application hangs -- the IDEA does not open. I have been trying to get over this for a long time but no help. Any help is appreciated.
bash-3.2$ ./idea.sh
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
2012-12-07 17:37:34.623 java[1789:c07] CWindow's _nativeShow encountered error: *** -[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil object from objects[0]
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
bash-3.2$
Thanks,
Rahul.

My input certainly wasn't intended to ba sarcastic, so please forgive me if it seemed so.
Seroiusly, always do a search before updating, http://discussions.apple.com/search.jspa?objID=f1201&search=Go&q=update+problem, NI is flaky at best IMHO, did you heck with them yet to see if a patch is available?
Always wait a few weeks before updating, a reinstall is a headache, goodluck!

Error while trying to use '{' in the query

Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt

Classic ASP - "ORA-01722: invalid number" using OraOLEDB.Oracle driver

I am working on doing some maintenance updates to a Classic ASP website, and I need to be able to run an insert/update statement for putting values into a lookup table. I am currently running into an "ORA-01722: invalid number" error when trying to use ADO and bind variables for my insert statement.
Below is an example of a table that I am having problems with:
CREATE TABLE "MATMGR"."TEST_SWING_TABLE"
(     "TABLE1_ID" NUMBER(4,0) NOT NULL ENABLE,
     "TABLE2_ID" NUMBER(4,0) NOT NULL ENABLE,
     CONSTRAINT "TEST_SWING_TABLE_PK" PRIMARY KEY ("TABLE1_ID", "TABLE2_ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
Here is some snippet code of the basic functionality I am trying to get to work:
''START CODE''
Dim connDb, cmdDoseInsert
Set connDb = Server.CreateObject("ADODB.Connection")
connDb.CursorLocation = adUseClient ' Setup to return RecordSet
connDb.ConnectionString = "Provider=OraOLEDB.Oracle;Data Source={host};User ID={user id};Password={password}"
connDb.Open()
Set cmdDoseInsert = Server.CreateObject("ADODB.command")
Set cmdDoseInsert.ActiveConnection = connDb
cmdDoseInsert.CommandType = adCmdText
cmdDoseInsert.NamedParameters = true ' Set the command object to use named parameters
cmdDoseInsert.Prepared = true
cmdDoseInsert.CommandTimeout = 0
cmdDoseInsert.CommandText = "INSERT INTO TEST_SWING_TABLE (TABLE1_ID, TABLE2_ID) VALUES (:P_TABLE1_ID, :P_TABLE2_ID)"
cmdDoseInsert.Prepared = true
cmdDoseInsert.Parameters.Append cmdDoseInsert.CreateParameter("P_TABLE1_ID", adNumeric, adParamInput)
cmdDoseInsert.Parameters.Append cmdDoseInsert.CreateParameter("P_TABLE2_ID", adNumeric, adParamInput)
'... START: While Looping
     cmdDoseInsert.Parameters(0).Value = {some numeric value}
     cmdDoseInsert.Parameters(1).Value = {some numeric value}
     cmdDoseInsert.Execute
'... END: Looping
''END CODE''
What I have been able to find out so far is that there is some type of issue with numeric values getting translated right when sending two and retrieving from Oracle in ASP. So, does anyone have any thoughts on how to resolve this as I would like to use parameterized SQL to improve application performance?
I am connecting to a developmental server running Oracle 9.2

Ok, in my slightly larger example I found out that for what ever reason my named parameters are not being enforced, and so I had to make sure that the parameters were in the same order as they appeared in the SQL. To be on the save side, I did this when they were added as well as when I was assigning values to them.
Can anyone tell me if this is an Oracle issue or a ASP issue?

Database error text: invalid number

Hi Gurus,
I am calling a procedure proxy from ECC and it is giving me a short dump:
Error 339 has occurred while executing database procedure
""_SYS_BIC"."Krishna_Demo_Proj.Model/KC_GET_MARA"" on the
current database connection "R/3".
Database error text: invalid number: ''
Triggering statement: "dsql_open_proc"
I have created a table with only one field.
Mapped the Data types after creating the Procedure Proxy
Which data type I need to use? I tried with lots of combinations but, still the same error.
Regards,
Krishna Chauhan

Hi Srinu,
I have used NVARCHAR 18 and corresponding to that CHAR18 is used.
Please see the attached screen shots.
Regards,
Krishna Chauhan

Error 10123 Invalid paramID used

Similar Messages

Maybe you are looking for