Error 1024 FF 36.00 Win10

Error code : 1024
Severity : critical
Description : No further playback is possible following a mediation error
Responsibility : MediaSelector
"This content doesn't seem to be working Please try again later"
When opening a BBC page with flash content. Latest flash installed.

I understand that there is an error playing a BBC UK video content when Flash is used as the default video player for the site on a newer version of Windows.
To make sure it does not have to do with an interaction with a plugin or hardware acceleration please see if this also happens in [[Troubleshoot Firefox issues using Safe Mode]]
However since it gave a serverity I wonder if it is a service error. In the Web Console when you load the page are there any 500 errors?

Similar Messages

  • Iphone Unknown Error 1024

    Guys please help me out with this problem, my phone have some weird problem and then it says connect to itunes. So I follow the instructions but when the itunes was preparing to restore my iphone. This message pops up Unknown error 1024 itunes cannot restore your iphone. Then the restoration process will stop, and up to this moment I can't see my iphone because it keeps on saying to connect to itunes.
    So please help me and here is my email [email protected] Thank you so much and God Bless

    I had the same error (-23) but i managed to update my iphone after a few days...  I uninstalled and reinstalled itunes on my laptop and it's work... No more error msg popping out and the updating went smoothly .
    p.s. Yuppie finally able to updated my iphone to iOS5..

  • "LogonUI.exe-Application Error" error after Windows update at Win10

    I get the LogonUI.exe error after the Windows 10 TP setup. Happening on both upgrade case, and also new install case. The Windows 10 TP was ok at the setup beginning, but this error happening after a Windows update and reboot. Now I cannot logon and cannot
    go to the safe mode, seems F8 or shift-F8 has no function. I'm using a T440s NB and checked all hardware diagnostics are good.
    stanley
     

    Just a data point... I've gone through the update (install of KB3002675 and KB3001512) and everything's still working.  It's not breaking for everyone.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • How to debug a runtime stack underflow error?

    I'm really struggling to resolve a stack underflow that I'm getting.  The traceback I get at runtime is:
    VerifyError: Error #1024: Stack underflow occurred.
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
    This is particularly difficult to debug because when I run in debug mode it does not happen at all.  It only happens when compiled as a release.
    Does anyone have any tips on how to debug a Stack Underflow?  Are have a clean explanation of what that means for Flash?
    In case it helps, this error is occurring when I click a button whose handler makes an RPC call, which uses a URLLoader, an AsyncToken, and then invokes the set of AsyncResponder instances associated with the AsyncToken.  With some server-side logging as well as some logging hacked into the swf, I know that the UrlLoader is successfully doing and GET'ing a crossdomain.xml file, is correctly processing it (if I wreck it, I get a security error), and is also successfully completing the "load" request (the server sends the data)... the underflow seems to be happening in the Event.COMPLETE listening/handling process (as is, of course, implied by the traceback as well).
    mxmlc used = from flex_sdk_4.5.0.20967
    Example player (I've tried a few) = 10.2.153.1

    Peter Blazejewicz wrote:
    crossposted:
    http://stackoverflow.com/questions/6270837/how-to-debug-a-runtime-stac k-underflow-error
    Yes... I intended to say so here but didn't get to it yet.  View traffic was extremely low here and I thought I'd see how stackoverflow compared.  I tend to check there first for most languages usually, but thought I'd try here as well to see if I should break that habit.
    As per the SO post, my specific problem was resolved by switching my variable initialization routine from the "initialize" application event, to the onCompletion event.  Although I am obviously "happy" about this since this issue cost me a lot of time and hair, it does not really indicate how I would go about debugging such an internal error in the future, so the question is technically unanswered.
    As to the question from Flex harUI, I am compiling indirectly via the MXMLC in the SDK, through the Amethyst Visual Studio plugin (which I'm auditioning).  The only libraries involved are from the flex_sdk_4.5.0.20967 SDK.  The project is quite small (a test project), consisting only of 1 MXML file and 2x .AS files.

  • Fresh Windows XP Install SATA Driver Error

    I'm trying to install WinXP on a new SATA Maxtor 120GB drive, and get the following error after pressing F6 and specifying the additional device:
    "File TXTSETUP.OEM caused an unexpected error (1024) in line 1742 in d:\xpclient\base\boot\setup\oemdisk.c."
    The drive is on the ICH5 SATA controller in the first position.  It is recognized by the BIOS correctly, along with the combo drive on the P-ATA controller.
    Any suggestions???

    I really don't know the ICH5 well enough to determine if there is an optimal reason why you select the PATA only or the SATA only to match the primary boot device. In the boot sequence you can boot in whatever order you want, and with the F11 key you can boot off whatever device you want. Whatever works is usually OK, but when things don't work, try the right way at least once  

  • SQL0964C  The transaction log for the database is full

    Hi,
    i am planning to do QAS refresh from PRD system using Client export\import method. i have done export in PRD and the same has been moved to QAS then started imported.
    DB Size:160gb
    DB:DB2 9.7
    os: windows 2008.
    I facing SQL0964C  The transaction log for the database is full issue while client import and regarding this i have raised incident to SAP then they replied to increase some parameter like(LOGPRIMARY,LOGSECOND,LOGFILSIZ) temporarily and revert them back after the import. Based on that i have increased from as below mentioned calculation.
    the filesystem size of /db2/<SID>/log_dir should be greater than LOGFILSIZ*4*(Sum of LOGPRIMARY+LOGSECONDARY) KB
    From:
    Log file size (4KB)                         (LOGFILSIZ) = 60000
    Number of primary log files                (LOGPRIMARY) = 50
    Number of secondary log files               (LOGSECOND) = 100
    Total drive space required: 33GB
    To:
    Log file size (4KB)                         (LOGFILSIZ) = 70000
    Number of primary log files                (LOGPRIMARY) = 60
    Number of secondary log files               (LOGSECOND) = 120
    Total drive space required: 47GB
    But still facing the same issue. Please help me to resolve the ASAP.
    Last error TP log details:
    3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
    4 ETW000   1 entry from FAGLFLEX08 (210) deleted.
    4 ETW000   1 entry for FAGLFLEX08 inserted (210*).
    4 ETW675 end import of "R3TRTABUFAGLFLEX08".
    3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
    4 ETW000  [     dev trc,00000]  Fri Jun 27 02:20:21 2014                                             -774509399  65811.628079
    4 ETW000  [     dev trc,00000]  *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN)                    85  65811.628164
    4 ETW000  [     dev trc,00000]  &+     DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C  The transaction log for the database is full. 
    4 ETW000                                                                                                  83  65811.628247
    4 ETW000  [     dev trc,00000]  &+     SQLSTATE=57011 row=1                                                                                             
    4 ETW000                                                                                                  51  65811.628298
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  67  65811.628365
    4 ETW000  [     dev trc,00000]  &+     DELETE FROM "FAGLFLEXA" WHERE "RCLNT" = ?                                                                        
    4 ETW000                                                                                                  62  65811.628427
    4 ETW000  [     dev trc,00000]  &+       cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=8, reopt=0                    
    4 ETW000                                                                                                  58  65811.628485
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  53  65811.628538
    4 ETW000  [     dev trc,00000]  &+     Input SQLDA:                                                                                                     
    4 ETW000                                                                                                  52  65811.628590
    4 ETW000  [     dev trc,00000]  &+                        1 CT=WCHAR           T=VARCHAR         L=6     P=9     S=0   
    4 ETW000                                                                                                  49  65811.628639
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  50  65811.628689
    4 ETW000  [     dev trc,00000]  &+     Input data:                                                                                                      
    4 ETW000                                                                                                  49  65811.628738
    4 ETW000  [     dev trc,00000]  &+     row 1:             1 WCHAR           I=6       "210"               34  65811.628772
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  51  65811.628823
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  50  65811.628873
    4 ETW000  [     dev trc,00000]  *** ERROR in DB6Execute[dbdb6.c, 4980] (END)                              27  65811.628900
    4 ETW000  [    dbtran  ,00000]  ***LOG BY4=>sql error -964   performing DEL on table FAGLFLEXA                    
    4 ETW000                                                                                                3428  65811.632328
    4 ETW000  [    dbtran  ,00000]  ***LOG BY0=>SQL0964C  The transaction log for the database is full.  SQLSTATE=57011 row=1
    4 ETW000                                                                                                  46  65811.632374
    4 ETW000  [     dev trc,00000]  dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL'                             59  65811.632433
    4 ETW000                         RSLT: {dbsl=99, tran=1}
    4 ETW000                         FHDR: {tab='FAGLFLEXA', fcode=194, mode=2, bpb=0, dbcnt=0, crsr=0,
    4 ETW000                                hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
    4 ETW000                                init:p=0000000000000000, init:#=0, wa:p=0X00000000020290C0, wa:#=10000}
    4 ETW000  [     dev trc,00000]  dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL'                            126  65811.632559
    4 ETW000                         STMT: {stmt:#=0, bndfld:#=1, prop=0, distinct=0,
    4 ETW000                                fld:#=0, alias:p=0000000000000000, fupd:#=0, tab:#=1, where:#=2,
    4 ETW000                                groupby:#=0, having:#=0, order:#=0, primary=0, hint:#=0}
    4 ETW000                         CRSR: {tab='', id=0, hold=0, prop=0, max.in@0=1, fae:blk=0,
    4 ETW000                                con:id=0, con:vndr=7, val=2,
    4 ETW000                                key:#=3, xfer=0, xin:#=0, row:#=0, upto=0, wa:p=0X00000001421A3000}
    2EETW125 SQL error "-964" during "-964" access: "SQL0964C  The transaction log for the database is full.  SQLSTATE=57011 row=1"
    4 ETW690 COMMIT "14208" "-1"
    4 ETW000  [     dev trc,00000]  *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN)                 16208  65811.648767
    4 ETW000  [     dev trc,00000]  &+     DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C  The transaction log for the database is full. 
    4 ETW000                                                                                                  75  65811.648842
    4 ETW000  [     dev trc,00000]  &+     SQLSTATE=57011 row=1                                                                                             
    4 ETW000                                                                                                  52  65811.648894
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  51  65811.648945
    4 ETW000  [     dev trc,00000]  &+     INSERT INTO DDLOG (SYSTEMID, TIMESTAMP, NBLENGTH, NOTEBOOK) VALUES (  ? , CHAR(   CURRENT TIMESTAMP - CURRENT TIME
    4 ETW000                                                                                                  50  65811.648995
    4 ETW000  [     dev trc,00000]  &+     ZONE   ), ?, ? )                                                                                                 
    4 ETW000                                                                                                  49  65811.649044
    4 ETW000  [     dev trc,00000]  &+       cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=15, reopt=0                   
    4 ETW000                                                                                                  55  65811.649099
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  49  65811.649148
    4 ETW000  [     dev trc,00000]  &+     Input SQLDA:                                                                                                     
    4 ETW000                                                                                                  50  65811.649198
    4 ETW000  [     dev trc,00000]  &+                        1 CT=WCHAR           T=VARCHAR         L=44    P=66    S=0   
    4 ETW000                                                                                                  47  65811.649245
    4 ETW000  [     dev trc,00000]  &+                        2 CT=SHORT           T=SMALLINT        L=2     P=2     S=0   
    4 ETW000                                                                                                  48  65811.649293
    4 ETW000  [     dev trc,00000]  &+                        3 CT=BINARY          T=VARBINARY       L=32000 P=32000 S=0   
    4 ETW000                                                                                                  47  65811.649340
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  50  65811.649390
    4 ETW000  [     dev trc,00000]  &+     Input data:                                                                                                      
    4 ETW000                                                                                                  49  65811.649439
    4 ETW000  [     dev trc,00000]  &+     row 1:             1 WCHAR           I=14      "R3trans"           32  65811.649471
    4 ETW000  [     dev trc,00000]  &+                        2 SHORT           I=2        12744              32  65811.649503
    4 ETW000  [     dev trc,00000]  &+                        3 BINARY          I=12744   00600306003200300030003900300033003300310031003300320036003400390000...
    4 ETW000                                                                                                  64  65811.649567
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  52  65811.649619
    4 ETW000  [     dev trc,00000]  &+                                                                                                                      
    4 ETW000                                                                                                  51  65811.649670
    4 ETW000  [     dev trc,00000]  *** ERROR in DB6Execute[dbdb6.c, 4980] (END)                              28  65811.649698
    4 ETW000  [    dbsyntsp,00000]  ***LOG BY4=>sql error -964   performing SEL on table DDLOG                36  65811.649734
    4 ETW000  [    dbsyntsp,00000]  ***LOG BY0=>SQL0964C  The transaction log for the database is full.  SQLSTATE=57011 row=1
    4 ETW000                                                                                                  46  65811.649780
    4 ETW000  [    dbsync  ,00000]  ***LOG BZY=>unexpected return code 2          calling ins_ddlog           37  65811.649817
    4 ETW000  [     dev trc,00000]  db_syflush (TRUE) failed                                                  26  65811.649843
    4 ETW000  [     dev trc,00000]  db_con_commit received error 1024 in before-commit action, returning 8
    4 ETW000                                                                                                  57  65811.649900
    4 ETW000  [    dbeh.c  ,00000]  *** ERROR => missing return code handler                               1974  65811.651874
    4 ETW000                         caller does not handle code 1024 from dblink#5[321]
    4 ETW000                         ==> calling sap_dext to abort transaction
    2EETW000 sap_dext called with msgnr "900":
    2EETW125 SQL error "-964" during "-964" access: "SQL0964C  The transaction log for the database is full.  SQLSTATE=57011 row=1"
    1 ETP154 MAIN IMPORT
    1 ETP110 end date and time   : "20140627022021"
    1 ETP111 exit code           : "12"
    1 ETP199 ######################################
    Regards,
    Rajesh

    Hi Babu,
    I believe you should have taken a restart of your system if log primary are changed.  If so, then increase log primary to 120 and secondary to 80 provide size and space are enough.
    Note 1293475 - DB6: Transaction Log Full
    Note 1308895 - DB6: File System for Transaction Log is Full
    Note: 495297 - DB6: Monitoring transaction log    
    Regards,
    Divyanshu

  • InDesign problem With Https cURL Seems Very Slow at first time  to handshaking to server

    I am trying to connect the server using cURL from Indesign, but when i am trying to call to server the indesign takes so much time to open and initialize the socket it takes 25 seconds at first time only, but On all subsequent calls it is fast,
    *but when i am tryid that same programe with an c++ empty project it is very fast in 2 second we get a result back,
    *So the Problem With Indesign Socket initialization using https at first time because i have tryid same Curl On Simple c++ program and it is fast at all calls
    Specification:
    I am Currently using
         Indesign cs7 version 9.0
         visual studio 2010
    Can Anyone tell me why It happens,
    my code snippet is as follows please try to find if anyone knows better.
             curl_global_init(CURL_GLOBAL_ALL);
              curl = curl_easy_init();
             struct data config;
          config.trace_ascii = 1; /* enable ascii tracing */
          struct curl_slist *chunk = NULL;
             curl_slist_append( chunk, "Content-Type: application/json");
          curl = curl_easy_init();
          struct AppMemoryStruct chunk1;
             chunk1.memory = (char *)malloc(1);  /* will be grown as needed by the realloc above */
             chunk1.size = 0;    /* no data at this point */
           if(curl) {
                 curl_easy_setopt(curl, CURLOPT_URL, url.GetPlatformString().c_str());
                 curl_easy_setopt(curl,CURLOPT_SSLCERTTYPE,"PEM");
                 curl_easy_setopt(curl, CURLOPT_SSLCERT, "C:\\test\\omg.aps.net.pem");
                 curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
              curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2);
                 curl_easy_setopt(curl,CURLOPT_KEYPASSWD,"");
                 char error[1024];
                 curl_easy_setopt ( curl, CURLOPT_ERRORBUFFER, error );
           /* send all data to this function  */
                 curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, &AppWriteMemoryCallback);
          /* we pass our 'chunk' struct to the callback function */
                 curl_easy_setopt(curl, CURLOPT_WRITEDATA, (void *)&chunk1);
          /* some servers don't like requests that are made without a user-agent
              field, so we provide one */
                 //curl_easy_setopt(curl, CURLOPT_USERAGENT, "libcurl-agent/1.0");
                 //curl_easy_setopt(curl, CURLOPT_HTTPHEADER, chunk);
                 //curl_easy_setopt(curl, CURLOPT_HTTPGET,1);
         //heres the performance get down its around 25 seconds when i am calling The server Using Curl Object Having
         //https url 
                res = curl_easy_perform(curl);
        // till here
                 if(CURLE_OK != res)
                     errorCode = kFalse;
                     if(chunk1.memory)
                         free(chunk1.memory);
                      curl_easy_cleanup(curl);
                   return errorCode;
                 errorCode = kTrue;
                 if(chunk1.memory)
                     returndata.SetCString(chunk1.memory);
                     free(chunk1.memory);
               /* always cleanup */
             curl_easy_cleanup(curl);curl_global_init(CURL_GLOBAL_ALL);
          please try to find a key issue why the performance is very bad using https.
    Thanks,

    I was tempted to move this over to the InDesign SDK forum where there are coders, but there isn't a lot of traffic over there, so I'm going to leave this open here with the advice that you probably won't get an answer from anyone here becasue we are, for the most part, not folks who work with code beyond scripting (and very few scripters hang out here, either).
    You should cross-post over there yourself and hope someone who understnds the qusetion sees it in one place or the other.

  • TS4522 Trouble burning Blu-ray or disc image using Share

    On  version  Final Cut Pro x 10.0.6,  When I try to share to a DVD disc it tells me there is not enough space on the DVD disc , the project is 2:30 minutes, I put dual DVD .
    After that just update on version Final Cut Pro x 10.0.8
    I have a tried to burn to a Blu-Ray  to the hard drive as a disc image using Share>Blu-ray. when trying to share Blu-Ray to the hard drive  I get this error after a day of transcoding:
    The operation couldn’t be completed. (DSPPublishing error -1024.)
    I am using
    Apple Mac Pro ,Mac OS X, Late 2008)
    Version 10.7.5
    Processor:  2 x 3 GHz  Quad-Core Intel Xeon, Total  8 core.
    Memory: 10 GB 667 MHZ DDR2 FB- DIMM
    Graphic: ATI Radeon HD 5770 1024 MB
    Please any one can help me for this trouble shut. 

    This may (or may not) be a separate issue – crashing rather than the DSP Publishing error.
    Two suggestions – both relying on Digital Rebellion.
    First use their Preference Manager to trash your preferences. Most of the crashes I've experienced over the past year of using FCPX have been remedied by trashing pref files.
    Second, DR has a suite of utility apps called Pro Maintenance Tools. PMT has a crash analyzer that will provide both diagnostic info and recommendations. The suite isn't cheap, but there is a trial version you can download to evaluate.
    Russ

  • Trouble burning Blu-ray or disc image using Share

    I have a project I have tried to burn to a Blu-Ray disc and to the hard drive as a disc image using Share>Blu-ray. I have burned successfully before to the same Blu-ray burner with other projects. But now when trying to burn a disc I get this error after a day of transcoding:
    The operation couldn’t be completed. (DSPPublishing error -1024.)
    When I try to save it as a disc image it tells me there is not enough space on the disc even though there is over a Terabyte empty. The project is estimated as 21.6 gig so I know it should fit on the 25 gig bluray and of course on the hard drive. Trashing prefs did not work either. This is a very frustrating process as each attempt takes a day to transcode before the error pops up and you have to start all over again.
    I am using
    iMac (27-inch, Late 2009)
    16 GB 1067 MHz DDR3
    2.8 GHz Intel Core i7
    FCP X 10.0.6
    OS X 10.8.2

    This is the error message I get. It's after FCP X is done with making the BMV folder and runs that disc burner app. There is about 850 gigs on the drive I want to save the disc image to, lots of space.
    I thought maybe the drive the events was on was affecting this process, because it was full. I cleared out about 30 gigs and still got this message.
    I never had any problems creating a Blu-ray disc image before. That's the optimcal way, IMHO, because you can burn the BD in Toast as the disc image and Toast won't reencode or do anything, it just burns the disc image and the disc has played on ever Blu-ray player I've tried it on.
    Anyone have any more ideas?
    Thanks

  • Trouble burning Blu-ray image using share to Hard Drive or disc.

    On  version  Final Cut Pro x 10.0.6,  When I try to share to a DVD disc it tells me there is not enough space on the DVD disc , the project is 2:30 minutes, I put dual DVD .
    After that just update on version Final Cut Pro x 10.0.8
    I have a tried to burn to a Blu-Ray  to the hard drive as a disc image using Share>Blu-ray. when trying to share Blu-Ray to the hard drive  I get this error after a day of transcoding:
    The operation couldn’t be completed. (DSPPublishing error -1024.)
    I am using
    Apple Mac Pro ,Mac OS X, Late 2008)
    Version 10.7.5
    Processor:  2 x 3 GHz  Quad-Core Intel Xeon, Total  8 core.
    Memory: 10 GB 667 MHZ DDR2 FB- DIMM
    Graphic: ATI Radeon HD 5770 1024 MB
    Please any one haw this problem that can help me for this trouble shut. 

    This is the error message I get. It's after FCP X is done with making the BMV folder and runs that disc burner app. There is about 850 gigs on the drive I want to save the disc image to, lots of space.
    I thought maybe the drive the events was on was affecting this process, because it was full. I cleared out about 30 gigs and still got this message.
    I never had any problems creating a Blu-ray disc image before. That's the optimcal way, IMHO, because you can burn the BD in Toast as the disc image and Toast won't reencode or do anything, it just burns the disc image and the disc has played on ever Blu-ray player I've tried it on.
    Anyone have any more ideas?
    Thanks

  • Nvidia RAID Driver Disk

    Nvidia RAID Driver Disk
    The problem is with trying to Install Windows XP [Upgrade]. (Clean Install)
    K7N2 Delta2-LSR
    I tried using the nForce3 SATA RAID Driver For Win2k/XP after pressing F6,
    during XP Install.
    They don't work, and after trying a couple of times - got an error reading.
    This Motherboard has an nForce2 Chipset, so I read the Manual.
    It showed how to make an Floppy SATA RAID Driver Disk.
    I tried to copy the SATA RAID Drivers from the MSI Driver's CD - but
    got Disk Full.
    Then I downloaded an Program to Format Floppy at 1.72MB, and copied
    all the necessary files to Floppy.
    Tried using it after pressing F6, but got Error - Unrecoginized Format.
    (The Floppy did read OK, MS-WIN ME)
    BTW I thought this Motherboard used nForce2 SATA RAID, why they include
    nForce3 SATA RAID Driver Floppy - I wonder.
    Any way to get SATA RAID Driver's that will fit on FDD 1.44MB ?
    [size=18]TheCyberDude[/size]

    [size=18]UPDATE[/size][/b]
    I looked at the nForce3 SATA RAID Driver, and the Folder raidtool was not on it.
    They Manual said to copy all files (Including Folders) to Floppy.
    (This wasn't posible, because of size limitation - 1.44 MB)
    So I made an SATA RAID Driver from the MSI CD, except I didn't copy the
    Folder raidtool.
    I tried to install Windows XP Again, it Took the SATA RAID Drivers OK -
    but after it said Setup loading files and the STALLS at Setup is Starting
    Windows.
    Tried it again, except this time I got this error:
    (File txtsetup.oem caused an unexpected error (1024) at line 1747 in
    d:\xpsprtm\base\boot\setup\oemdisk.c.)
    If I don't Press F6, it shows the partitions:
    39080 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
    C: Partition1 [FAT32] 78160 MB (77280 MB free)
    39080 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
    Unpartitioned space 39080MB
    I was able to Format with NTFS (Successfully), but it wasn't recongized.
    (Figured that it wouldn't - Because I was able to get SATA RAID Driver's loaded Successfully)
    Just wanted to see what it would do.
    TheCyberDude

  • Windows 10 upgrade key fails repeatedly

     Why am I continuing to have Win7 Serial Number Key problems upgrading to Windows 10 64-bit, despite my install attempts using USB, DVD, and website software downloaded from Microsoft?  I have repeatedly attempted to upgrade our HP DV6  (2 years old) to the Windows 10 Upgrade with no success and a lot of frustration...  The problem seems to be the HP Win7 install key placed on our laptop by HP is not recognized by either the Win10 upgrade DVD, the Win10 upgrade USB Memory Stick or the Microsoft Win10 install website.  The DVD and USB install attempts say the HP serial number originally installed on our laptop by HP is not recognized and prevents the upgrade from continuing.  The Win10 website upgrade application starts, tries to load temporary files, and then abruptly terminates during the install attempt with no diagnostic or error message. Microsoft Tech Support (Level 3) verified about 1 week ago the DV6 laptop is fully up-to-date on all drivers,  Windows 7 software, and fully ready for the Win10 upgrade.  The laptop currently has a fully working wireless connection to the Internet.  All Anti-Virus and Anti-Malware software has been fully disabled to allow the upgrade attempts. The HP Software Advisor website says all HP software and drivers are up-to-date.  All TMP files etc. have been cleaned out with CCleaner.  The primary HD has been fully defragmented.  The laptop has 6MB of memory, 500+ GB available disk space on the primary partition, and 150MB available on the System partition.  The laptop has recently been been upgraded to use Internet Explorer 11 which is working correctly. Question 1: Why are we continuing to have problems with the HP Win7 Install Key# not being recognized for the Win10 upgrade? Question 2:  is HP trying to regulate when HP owners upgrade their computers to Win10 by controlling when HP Win7 install keys are recognized for Win10 upgrades?  If so, they should inform HP Owners in advance and not through frustrating Owners by trial-and-error.

    I finally got the Win10 upgrade to start after a call to Microsoft Tech Support and here's why upgrade problems occurred and how to address them... The problems I experienced are caused by Microsoft and HP who have not made clear when HP laptops that are out of warranty will be allowed to complete the Win10 upgrade o0n the Internet nor how a local Win10 upgrade should be completed.. 1.) I called HP Tech Support about Win10 upgrade problems with abrupt disconnects & they refused to even discuss my concerns unless I bought an *expensive subscription package*. They said my laptop is just out of warranty and the 3rd party contractor company wanted $150 for a 6 month tech support subscription before they would answer any of my basic questions. 2.) Creating a DVD or USB as the startup drive from the Win10 Upgrade ISO downloaded from Microsoft DOES NOT WORK because this causes the bootable software to think it is a new install and not an upgrade. I also could not get the bootable USB stick with the Win10 Upgrade to read correctly and the Setup app crashed with no error message. 3.) Apparently the Microsoft Win10 website is delaying OEM "out of warranty" Win10 upgrades to enable Retail Version Customers, Businesses, and OEM "In Warranty" computers to have the first chance to upgrade. Here's how I solved the Win10 Upgrade problem... In summary, I a.) used MSCONFIG.EXE to disable ALL non-Microsoft Apps (except HP) from loading at startup NOTE: I tried to let all HP hardware & software load, but disabled McAfee Anti-Virus, Spybot S&D, etc. b.) created a permanent virtual drive for only the Win10 Upgrade ISO (I used the *64-bit version* of MagicDisc freeware downloaded from the Internet) c.) booted from the Win7 C: drive, opened the ISO virtual drive, and ran the ISO Setup.exe. d.) the Win10 upgrade Setup.exe ran with no problems, checked for the Internet for updates, and prepared the laptop for the Upgrade. I was then prompted to close the Finished Window, I manually restarted the laptop from the Start Menu and after the POST, the actual Win10 Upgrade started without my having to do anything. e.) As the Win10 Upgrade moved forward, a small message appeared that said my computer may have to be rebooted several times during the upgrade to assure that the correct sets of drivers were detected, loaded, and upgraded. After the Upgrade completes, I will have to re-activate and test the 3rd party Software apps disabled by MSCONFIG individually so I can be sure the drivers and software work correctly. Apps should be reactivated one-at a-time to discover which apps are not compatible with Win10 and/or may require an OEM upgrade. This may require rebooting and testing the 3rd party app one at a time to determine compatibility issues... Please note: Microsoft now tracks everywhere you go on the Internet with Win10 and disabled privacy settings during the upgrade. .

  • Stack underflow

    on the first line of applyColorToCurrentGenome(), it is:
    var currTheme:Object = colorThemeCombo.selectedItem;
    where colorThemeCombo is a combobox.
    I don't know what caused this error.
    It is a flex3 project, compiled and debugged on FB4.
    My browser is google chrome, and flash player version is 10,1,102,64
    typecheck plugin/applyColorToCurrentGenome()
      outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ mx.core::Container$ mx.core::LayoutContainer$ mx.core::Application$ plugin$]
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
      0:debugfile "D:\mydoc\flex\SeqDrawPlugin\src;;plugin.mxml"
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
      2:debugline 432
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
      5:getlocal0
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} (plugin[O])
      6:pushscope
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} ()
      7:pushnull
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} (null[O])
      8:coerce SeqGraph.Elements::ElementBase
                           [plugin[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} (SeqGraph.Elements::ElementBase?[O])
      10:setlocal3
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} ()
      11:pushnull
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} (null[O])
      12:coerce_s
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] *[A] *[A] *[A] *[A] *[A]] {plugin[O]} (String?[S])
      13:setlocal 4
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] *[A] *[A] *[A] *[A]] {plugin[O]} ()
      15:pushbyte 0
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] *[A] *[A] *[A] *[A]] {plugin[O]} (int[I])
      17:convert_u
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] *[A] *[A] *[A] *[A]] {plugin[O]} (uint[U])
      18:setlocal 5
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      20:debug
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      27:debug
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      34:debug
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      41:debugline 433
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      44:getlocal0
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} (plugin[O])
      45:getproperty colorThemeCombo
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} (mx.controls::ComboBox?[O])
      48:getproperty selectedItem
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} (Object?[A])
      51:coerce Object
                           [plugin[O] *[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} (Object?[A])
      53:setlocal1
                           [plugin[O] Object?[A] *[A] SeqGraph.Elements::ElementBase?[O] String?[S] uint[U] *[A] *[A] *[A]] {plugin[O]} ()
      54:pop
    VerifyError: Error #1024: 发生堆栈下溢。
    at plugin/applyColorHandler()[D:\mydoc\flex\SeqDrawPlugin\src\plugin.mxml:409]
    at plugin/__colorThemeCombo_change()[D:\mydoc\flex\SeqDrawPlugin\src\plugin.mxml:564]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\co re\UIComponent.as:12266]
    at mx.controls::ComboBox/dispatchChangeEvent()[E:\dev\4.0.0\frameworks\projects\framework\sr c\mx\controls\ComboBox.as:1879]
    at mx.controls::ComboBox/close()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\controls\ ComboBox.as:1651]
    at mx.controls::ComboBox/dropdown_changeHandler()[E:\dev\4.0.0\frameworks\projects\framework \src\mx\controls\ComboBox.as:2137]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\co re\UIComponent.as:12266]
    at mx.controls.listClasses::ListBase/mouseUpHandler()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\controls\listClasses\ListBase.as:10240]
    at mx.controls::List/mouseUpHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\cont rols\List.as:2469]

    Looks like you might be mixing different Flex versions. All SWCs in a
    project must be compiled against the same version.  Also all SWFs loaded
    must be compiled against the same version unless you use Marshall Plan
    techniques.

  • Create disc fails

    Hi all. I'm really frustrated.
    I have a series of long movies that I am turning into Blu-ray discs. One movie in particular always fails, after the encode. It creates the intermediate BDMV folder, and then reports that it failed due to inadequate disc space. There are 200 free GB on the disc. If I click "try again" then it will work for a while and fail again with DSPPublishing error -1024. Other movies done in the same way don't have this problem. I've tried it with a new user and get the same results.
    Any help?

    Hi all.
    I think the problem was fixed by the recent pro apps update, and I think I know how. I noticed that after the update the automatically-calculated bitrate dropped from 12.5 to 11.5. So it would appear that it was an error in the bitrate estimation used to fill the disc.
    It would appear that once Create Disc starts to build, it will report a "out of space" error if the BDMV folder will be too large, even if it is going to a disc image rather than physical disc. I assumed that if the BDMV folder was too large for a 25GB image, I would have seen a disc image be created in the output directory first. I never saw that happen, so I figured the bitrate/filesize was not the problem. I wonder if there is a temp disc image stored somewhere, that probably did reach capacity, or if the only actual image the final one, usually on the desktop.
    Jeremy

  • K8N Neo2-54G: USB problem + other probs

    This board is really giving me a headache.  
    I installed my new system yesterday, and all worked for a little while. It seemed very slow booting, and sometimes it did not want to proceed from the first screen, Platinum, requiring a restart. It usuallt booted on a second attempt.
    I upgraded the bios to modded 1.37. After this it wont recognise any USB devices (keyboard and mouse attached).
    I now tried to do a reinstall after flashing back to 1.36 bios. I attached my floppy, press F6 when XP setup is initialized, but when I am requested to put in my sata floppydisk, the pc can't read the disk. Seems like either my floppy is dead (seems to work ok according to lights and noice) or the MB can't communicate with it. (similar to usb devices).
    Questions:
    1. What is wrong with the USB?
    2. How can I install sata drivers for XP without floppy?
    3 Is the board dead?
    My ram is OCZ PC 3200 512MB EL Dual CH Platinum rev.2 (only one stick of 512mb installed now), CPU is Winchester 3200+, Samsung 1614C sata disk.
    I upgraded nvidia drivers to 5.10
    Pls help!

    I also just bought board yesterday and I agree that there are many problems, which are not helped by the very poor manual. You have to rely on forums for basic information. I too am having a problem installing the raid drivers from the A drive. I have the same ram (PC 3200 512MB EL Dual CH Platinum rev.2) coutesy of Asentech and a Athlon FX55. The operating CD has Windows XP +SP2 deployed and when I tried to load the drivers I got the message ' Filetextsetup.oem caused an unexpected error (1024) at line 1747 in d:\xppsprtm\base\boot\setup\oemdisk.c' This corrupted my A disk and I had to down load files from the following site
    http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=4&CHIP=4&ID=1
    I guess that the drivers are niot compatible with WinXP SP2 . I am now at a loss and will try just Windows XP. Anybody any ideas on how to proceed?

Maybe you are looking for

  • Upgrading BOE XI R2 Java Web Applications to use BOE XI 3.1

    Hello, Does anyone know where I can get documentation about how to update Java Web Applications using BOE XI R2 to BOE XI 3.1? I search the documentation online and I couldn't find any. I believe that it should be a matter of just updating the Java A

  • Allowing Digital signatures for Reader

    I've come across an issue that I have not been able to figure out. I have created a pdf on my computer which has Acrobat X. Within my document I have portions where there are digital signature. Now I can sign the blocks when I use my computer, but wh

  • Binary tree problems.

    hi everyone. I have an assignment to use a binary search tree whose nodes hold a reference to a string, and also to an int which is the count of how many times that word occurs in an input file, then it traverses the tree and prints out the result to

  • Security update 2013-002?

    Security update 2013-002 on my 13" early 2011 Mac OS 10 Lion 10.7.5 has  made it a 24 hour deal to send an e-mail and I haven't yet been able to  receive one since I installed it on June 22.  Is there a way to disable  this security update and go bac

  • Portege 7220 upgrade to Windows XP

    What's the best way to upgrade to Windows XP? (now 98se) Are there maybe people who already upgraded, or is there a manual to do this? Thx in advance Grard (The Netherlands)