"Error -10452 occurred at AI singlescan, no interrupt level available for use."

AI sample channel (single point waveform).vi
Error -10452 occurred at AI singlescan.
Possible reasons:
NI-DAQ LV: No interrupt level available for use.
I have configured 2 virtual channels to use AI chn0 and chn1 in Measurment and Automation explorer, but I get error -10452 in the test panel.

SS 01,
In order to better troubleshoot this error, can you tell me what board you are using, what operating system you have, and what versions of NI-DAQ and LabVIEW you have installed?
Have a great day.

Similar Messages

AI Control gives error: 10452 occurred at AI control. Possible reasons: NI-DAQ LV no interrupt level is available for use.

How can I run out of interrupts while accessing my DAQPad? Does
the community have troubleshooting suggestions?

You don't say which DAQpad. If this is a device on your parallel port then
you will need to make sure that the parallel port has an interrupt assigned
and not just a base address.
Check out the following from the NI Knowledgebase:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bf7960eb90
ef882a8625654e007d8b1a?OpenDocument
Ian
"Riverside Consulting, LLC" wrote in message
news:[email protected]..
> AI Control gives error: 10452 occurred at AI control. Possible
> reasons: NI-DAQ LV no interrupt level is available for use.
>
> How can I run out of interrupts while accessing my DAQPad? Does
> the community have troubleshooting suggestions?

HT202159 After clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

Just recently purchased Quartet for Keynote, downloaded it after clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

Try the developer's site FAQ;s ...
http://graphicnode.com/support/faq/
Their contact info here > http://graphicnode.com/support/contact/
Check GateKeeper
Open System Preferences > Security & Privacy > General
Make sure App Store and indentifed developers is selected.
If not, click the padlock icon to make changes. You may be prompted for your admin password.
Then try downloading the app.

Error coming " A   BS   001 No status object is available for SDI 0 "

Hi Experts,
I am facing a issue.. I am creation a sales order using BAPI " BAPI_SALESORDER_CREATEFROMDAT2 "
In one scenario, I am able to create Sales Order with Status Profile..
But For second scenario, its giving error like "A   BS   001 No status object is available for SDI 0" .
Between both scenario, only difference is Distribution channel and Condition record.
DATA : wa_order_header_in TYPE bapisdhd1,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gs_order_partners TYPE bapiparnr,
gs_order_partners1 TYPE bapiparnr,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gs_order_items_in TYPE bapisditm,
gt_order_conditions_in TYPE STANDARD TABLE OF bapicond,
gs_order_conditions_in TYPE bapicond,
gt_order_schedules_in TYPE STANDARD TABLE OF bapischdl,
gs_order_schedules_in TYPE bapischdl,
*         gt_return TYPE STANDARD TABLE OF bapiret2,
*         gs_return TYPE bapiret2,
gt_error TYPE STANDARD TABLE OF bapiret2,
gs_error TYPE bapiret2,
gt_log TYPE TABLE OF zsd_ecomerr,
gs_log TYPE zsd_ecomerr,
it_item_temp TYPE TABLE OF zst_sfdc_so_items_dom WITH HEADER LINE,
lt_return TYPE STANDARD TABLE OF bapiret2,
ls_return TYPE bapiret2,
lt_order_conditions_in TYPE STANDARD TABLE OF bapicond,
ls_order_conditions_in TYPE bapicond,
ls_sfdc TYPE zsd_sfdc_order .
DATA: wa_order_header_inx TYPE bapisdhd1x,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
lt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gs_order_items_inx TYPE bapisditmx,
gt_order_schedules_inx TYPE STANDARD TABLE OF bapischdlx,
gs_order_schedules_inx TYPE bapischdlx,
gt_order_conditions_inx TYPE STANDARD TABLE OF bapicondx,
gs_order_conditions_inx TYPE bapicondx,
lt_order_conditions_inx TYPE STANDARD TABLE OF bapicondx,
ls_order_conditions_inx TYPE bapicondx,
ls_order_items_inx TYPE bapisditmx,
lv_kbetr TYPE kbetr VALUE '10',
lv_curr TYPE waers ,
lv_ihrez TYPE ihrez ,
lv_knumh TYPE a005-knumh.
DATA:isrno LIKE vbap-posnr.
DATA: x_orderitemx LIKE bapisdh1x.
TYPES: BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
mwsbp TYPE vbap-mwsbp,
END OF ty_vbap.
DATA: lv_lfstk TYPE vbuk-lfstk,
lv_cmgst TYPE vbuk-cmgst,
lt_vbap TYPE TABLE OF ty_vbap,
ls_vbap TYPE ty_vbap,
lv_bstnk TYPE vbak-bstnk.
****// Checking PO Type. This is mandatory from SFDC
IF sfdc-potype <> '' .
****// Checking here, Whether SFDC Order ID already exist or not. ***//
SELECT SINGLE * FROM zsd_sfdc_order WHERE sfdcorder = sfdc-sfdcorder AND land1 = 'IN'.
IF sy-subrc <> 0.
****// SO creation Process
wa_order_header_in-doc_type    = 'ZHOT'.
wa_order_header_in-sales_org   = '2700'.
IF sfdc-potype = 'SFSD'.                        " S & D
wa_order_header_in-distr_chan = '30'.
wa_order_header_in-division    = '00'.
ELSEIF sfdc-potype = 'SFHO'.                    " Hospitality
wa_order_header_in-distr_chan = '33'.
wa_order_header_in-division    = '00'.
ENDIF.
wa_order_header_in-purch_date = sfdc-purch_date.
wa_order_header_in-purch_no_c = sfdc-sfdcorder. "SFDC Order ID
wa_order_header_in-doc_date    = sy-datum.
wa_order_header_in-currency    = 'INR'.
wa_order_header_in-ref_1       = sfdc-purch_no. "sfdc-sfdcorder.
wa_order_header_in-po_method = sfdc-potype.
wa_order_header_inx-updateflag = 'I'.
wa_order_header_inx-doc_type    = 'X'.
wa_order_header_inx-sales_org   = 'X'.
wa_order_header_inx-distr_chan = 'X'.
wa_order_header_inx-division    = 'X'.
wa_order_header_inx-purch_no_c = 'X'.
wa_order_header_inx-purch_date = 'X'.
wa_order_header_inx-doc_date    = 'X'.
wa_order_header_inx-currency    = 'X'.
wa_order_header_inx-ref_1       = 'X'.
***// Ship to party
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = sfdc-kunag
IMPORTING
output = sfdc-kunag.
gs_order_partners-partn_numb = sfdc-kunag.
gs_order_partners-partn_role = 'WE'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_order_partners-partn_numb
IMPORTING
output = gs_order_partners-partn_numb.
APPEND gs_order_partners TO gt_order_partners.
CLEAR: gs_order_partners.
***// Sold to Party
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = sfdc-kunnr
IMPORTING
output = sfdc-kunnr.
gs_order_partners-partn_numb = sfdc-kunnr.
gs_order_partners-partn_role = 'AG'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_order_partners-partn_numb
IMPORTING
output = gs_order_partners-partn_numb.
APPEND gs_order_partners TO gt_order_partners.
CLEAR: gs_order_partners.
***// Clubed all materials
LOOP AT it_items.
it_item_temp-matnr     = it_items-matnr.
it_item_temp-kwmeng    = it_items-kwmeng.
it_item_temp-kwert     = it_items-kwert.
it_item_temp-reg_dis   = it_items-reg_dis.
it_item_temp-add_dis   = it_items-add_dis.
it_item_temp-tann   = it_items-tann.
COLLECT it_item_temp.
ENDLOOP.
***// Saving Line Item data
LOOP AT it_item_temp.
isrno = isrno + 10.
gs_order_items_in-itm_number = isrno.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_item_temp-matnr
IMPORTING
output = it_item_temp-matnr.
gs_order_items_in-material = it_item_temp-matnr.
gs_order_items_in-plant        = sfdc-werks.
gs_order_items_in-currency     = 'INR'.
IF it_item_temp-tann = 'X'.
gs_order_items_in-item_categ   = 'TANN'.
ENDIF.
APPEND gs_order_items_in TO gt_order_items_in.
CLEAR gs_order_items_in.
SELECT SINGLE knumh
INTO lv_knumh
FROM a005
WHERE kappl = 'V'
AND   kschl IN ('ZR04', 'ZR00')
AND   vkorg = '2700'
AND   kunnr = sfdc-kunnr
AND   matnr = it_item_temp-matnr.
IF sy-subrc = 0.
SELECT SINGLE kbetr
INTO it_item_temp-kwert
FROM konp
WHERE knumh = lv_knumh.
ELSE.
gs_order_conditions_in-itm_number = isrno.
IF sfdc-potype = 'SFSD' .                              " Sales and Distribution
gs_order_conditions_in-cond_type = 'ZR04'.
ELSEIF sfdc-potype = 'SFHO'.                           " Hospitality
gs_order_conditions_in-cond_type = 'ZR00'.
ENDIF.
it_item_temp-kwert = it_item_temp-kwert .
gs_order_conditions_in-cond_value = it_item_temp-kwert .
gs_order_conditions_in-currency   = 'INR'.
APPEND gs_order_conditions_in TO gt_order_conditions_in.
CLEAR gs_order_conditions_in.
gs_order_conditions_inx-itm_number   = isrno.
gs_order_conditions_inx-cond_type    = 'X'.
gs_order_conditions_inx-cond_value   = 'X'.
gs_order_conditions_inx-currency     = 'X'.
gs_order_conditions_inx-updateflag   = 'X'.
APPEND gs_order_conditions_inx TO gt_order_conditions_inx.
CLEAR gs_order_conditions_inx.
IF sfdc-potype = 'SFSD'.
***// Regular Discount to Customer
IF it_item_temp-reg_dis <> '0.00'.
gs_order_conditions_in-itm_number = isrno.
gs_order_conditions_in-cond_type = 'ZDID'.
gs_order_conditions_in-cond_value = it_item_temp-reg_dis * lv_kbetr. " 10 .
gs_order_conditions_in-currency   = 'INR'.
APPEND gs_order_conditions_in TO gt_order_conditions_in.
CLEAR gs_order_conditions_in.
gs_order_conditions_inx-itm_number = isrno.
gs_order_conditions_inx-cond_type    = 'X'.
gs_order_conditions_inx-cond_value   = 'X'.
gs_order_conditions_inx-currency     = 'X'.
gs_order_conditions_inx-updateflag   = 'X'.
APPEND gs_order_conditions_inx

Dear Marthanda,
Is there any Status Profile attachec in to your Sales Order Type in T. Code: VOV8 (Tab: Transaction Flow, Field: Status Profile)?
If yes, remove it.
If not, then...
Check error with:
T. Code: SM13/ ST22
For more info, refer link:
Error in the status table JSTO
Hope, this may help you.
Best Regards,
Amit

An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'dsPriority'. (rsErrorExecutingCommand)

click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
   at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
   --- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)

Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards,

Error importing new version of our app "Application not available for edit"

Hi,
We are trying to import an app and get the error: Application not available for edit
thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
Any clues?
We tried a new id, tried a custom id.
Then we tried deleting the existing app so we could insert the new app.
We can't delete either.
Help!

I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

Error 10805 occurred at AI SingleScan

I have 6024E. I get the following error message when I try to run Real-Time PID Control.vi and PID Control Loop.vi:
NI-DAQ LV: The clock rate is faster than the hardware can support. An attempt to
input or output a new data point was made before the hardware could finish
processing the previous data point. This condition may also occur when glitches
are present on an external clock signal.
My input channel is a pair of analogue input pins in differential mode, and my output channel is an analogue output pin (All hooked up to BNC connectors). The output is connected to some equipment, while the input is not connected to anything. I am just testing my setup right now, before using some actual devices for input. I have done th
e exact same thing before, and it worked. I have tried lengthening the Loop Delay time to 50ms in PID Control Loop.vi, and lowering the Rate (S/s) in Real-Time PID Control.vi. Yet I still get the same error message. Any suggestions as to why this happens? Thanks
Actually, when I try to run the programs again now, the error is 10845...strange...

Greetings,
These are strange errors to be receiving with these examples. Does your NI 6024E function correctly in Measurement & Automation Explorer? Do other DAQ example programs also generate these errors? It is possible that your NI 6024E is not functioning properly. You indicated that you have successfully executed these examples in the past. Were you using this NI 6024E?
Spencer S.

FRM-99999: Error 408 occurred. See the release notes file (relnotes) for

I am trying to insert the data in a a table and iam geeting this record
please advise

I get this error too. It is caused because of a check constraint violation on a materialized view that is fast refreshed on commit. First we see a FRM-40400 (1 record applied and saved) and immediately after that the FRM-99999 Error 408.
Don't know if this is the case at your location, but it could be.
At the moment I'm also looking for a solution.
Kind regards,
Rob van Wijk.

An error has occurred while trying to load the files required for firefox .....so firefox does not run at all

HTC Android I have latest version

Hi,
I'm sorry you're having this problem with Firefox mobile. You might try going to settings - manage applications on your device and uninstall Firefox and then install it again.
Thanks,
Michelle

Error installing EMET 5 on Windows 7 "key not valid for use in specified state"

No - those other references do not answer the question. However, this issue appears not to be EMET specific, but .MSI installer specific--i.e. other .MSI installs are failing on this machine with the same message...
All of the references I have been able to find involve SQL or code-signing--I need to fix this issue on an end-user laptop attempting to install properly signed code--EMET 5, for example!
Bill Sanderson
NEVER MIND: Found the answer:
C:\Users\xxx\AppData\Roaming\Microsoft\Crypto\RSA
Deleted content at the above location, and the problem is resolved.

Thank you !
I had to install some MSI's with services and got the same error. Found this post quite soon and this solution solved the problem immediately. Thanks !
Fixer

Error 0x610000f6, received on offjet 6500a. tried what was available, no use. any suggestions

error: 0x610000f6 on Office jet 6500 printer, windows7. Try actions recommended, though there contradict each other. Help pls. cant PRINT AT ALL. tx

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Portal error in SRM 7.0 -"There is no iView available for system "SAP_SRM"

Hi All,
We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
"There is no iView available for system "SAP_SRM": object "cont". For more information, contact your administrator."
We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
Any pointers?
Thanks
Arun

Hi Arun,
Pls check the portal content and portal roles with iviews maintained properly or not.
Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
This might help you.
http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
Regards
Kiran

Error 10401 occurred at AI Hardware Config, when using AI Acquire Waveform vi

I can successfully run applications that use the AI Sample Channel vi, however when I use the AI Acquire Waveform vi the following errors are generated:-
Error -10401 occurred at AI Hardware Config, followed by
Error -10401 occurred at AI SingleScan.
All applications have been developed using Labview 6.0.2, on an NT machine. The applications are then run (or atleast attempted to be run) using the Labview Run-Time Engine on a different NT machine.
The driver software I am using is the NI-DAQ Native Data Acquisition Driver Software Version 6.1.

Hi,
I've found a Knowledge Base on the NI website describing some situations where this problem occurs:
http://digital.ni.com/public.nsf/websearch/46F78EDD19BA0CC386256CEE007201FC?OpenDocument
That error code is generally seen when something has changed in the DAQ card's configuration, or the drivers are not installed properly. It's strange that this is showing up only on certain functions for your application.
Also try having a look through the DAQ troubleshooting pages on the website:
http://www.ni.com/support/daq/
Regards,
Mark Lee
National Instruments

Error 10452 using DAQCard 6024E

When I try to run a .vi that get data from a sensor... I get error 10452 and it says 'no interupt is available for use.' I am using a HP Pavillion zd7000 laptop in a WinXP environment. I have attempted changing the IRQ to no avail... has anyone had a similar problem and figured out a solution?

THe best thing to do is to check to see what IRQ is currently assigned to your DAQCard, and determine if any other devices in your system are also using that same IRQ. If there is a conflict, then the problems you described will occur. Ways to resolve it include disabling or changing the IRQ of the other conflicting device to another IRQ value, or changing the IRQ your DAQCard is using to a value which is currently unused.
The following thread discusses a similar issue and gives suggestions:
http://forums.ni.com/ni/board/message?board.id=250&message.id=5394
I am curious, which IRQ values have you attempted to use thus far with no luck ?

Whenever I try to sync my iPod touch, a window appears and says that my iPod wasn't synced because an unknown error has occured (13019). Help?

Any suggestions on what I can do to fix the problem?
I've also noticed that it started deleting some of the music on my iPod touch, and so everything on it is screwed up.
I don't want to restore it because then I'll lose all the information on my apps. (Is there any way to recover that information along with the apps?) If I do restore it, will there be a chance that the error will occur again, otherwise I would have lost everything for nothing.
By the way, the software version of my iPod is 3.1, it's 2nd gen., and my iTunes version is very far behind from the new version currently available. Could that be part of the problem, too?

Try here:
iTunes: Error 13019 during sync
Not updating the iOS should not effect your problem.
As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS.

"Error -10452 occurred at AI singlescan, no interrupt level available for use."

Similar Messages

Maybe you are looking for