Error 1074396154 received during delayed trigger.

I am using a GigE camera to capture an image and then check for a hole using IMAQ Find Circular Edge. Each time the camera receives a trigger the image is captured and the while loop processes and the results are displayed. If the trigger is delayed for more than about 5 seconds, I get Error 1074396154 (IMAQ Spoke - Image not large enough for the operation).
My understanding was the while loop would not try to process until a new image was received. Is there possibly a setting which controls the while loop operation?
Regards,
Doug

The Oracle database doesn't support the returning clause for database views using instead-of triggers. ADF BC inherently includes the returning clause, if in a relating EO you have the refresh-after-insert or refresh-after-update property set on for an attribute.
Hope this helps.
CM.

Similar Messages

I am receiving an error code EX11 during CC installation from Creative Cloud

I am receiving an error code EX11 during CC installation from Creative Cloud.

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

An error has occurred during SWF generation.

Hello
We are receiving the error message "An error has occurred during SWF generation. Please contact the file creator or your system administrator" while trying to publish a dashboard to the BO server. But we haven't been able to assure the client what's causing the problem.
Here is some background about the dashboard and the error:
- It does not contain any unsupported formulas.
- It contains about 3,000 rows distributed on different tabs.
The error appears to happen randomly. I have succesfully exported the swf file locally (on my computer) a couple of times. Using the preview button also works sometimes, but when we try tu publish we get the error. We also have other dashboards, and publishing them works fine with them.
I think this might be a resources issue, the computer from which we are trying to publish has 2GB in RAM, and although it doesn't seem to be consuming all memory when trying to publish, it looks pretty close to do so.
I've succesfully deployed the swf file on locally on an other computer that has 8GB in RAM, but it is not in domain, so I cannot publish from there, and due to company's policy we cannot copy the swf files directly to the server.
I'm looking for help on the error, or for an explanation on what does Xcelsius do when generating the swf, for the tests I've run I would say it is a resources problem but I don't have a way to support this.

Hi,
You can try to reduce the size and complexity in excel.
Just export your excel to local machine, open and save it again reimport the same excel.
By doing so your excel file size will get reduced. (To see the difference record the size when exported from xcelsius and after saving xls).
One more suggestion is try to reduce the complex formulas. All i can say is replace the Vlookup formulas with Match and Index.
Reduce if more countif() or Sumif() are used.
Last but not least, try to increase flashs buffer size.
Hope this might help you.
If these things are not going to work......... Last option is to increase your machines RAM.
Regards,
AnjaniKumar C.A.

An error has occurred during report processing. (rsProcessingAborted)

Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)

Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

When i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly. help?

when i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly after i sign back in. help?

hi,
Mac, iPhone, iPad, iPod Touch ?
Do they appear eventually ?
The iMessages are "pushed" to the devices which means there can be small delays between the server recognising the device went Off Line and coming back.
10:19 pm Thursday; July 10, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase

Hi ,
During upgrade of EHP1 - NW 700 i am getting a error in configuration step like An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase
The validation of the deploy queue was not successful. Request to check queue sapjup-queue completed with error. JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10.
You can find more information in the log file /EHPI/java/log/PREPARE_JSPM_QUEUE_CSZ_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue com.sap.sdt.sapjup.tools.sapjupjspm.JSPMRapiException The validation of the deploy queue was not successful. PREPARE_JSPM_QUEUE INIT NetWeaver Enhancement Package Installation SAPJup Java Enhancement Package Installation
When reporting problems to SAP Support, attach the trouble ticket file /EHPI/java/log/TroubleTicket_01.txt to your message
Plz help me to analyze on this issue.
Regards,
Hari

Hi Vasil Dimitranov
Thanks for your response.I have went through the log wat u said and found that only Java Patch JSPM is deployed in my system and the others patches are found be taken from the xml file and not deployed due to this below errors.
Aug 11, 2009 11:53:33 AM [Error]: java.lang.NullPointerException:
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10
Aug 11, 2009 11:53:33 AM [Info]: Message type received disconnect.
Aug 11, 2009 11:53:33 AM [Info]: Remote connection is closed.
Aug 11, 2009 11:53:34 AM [Warning]: Refusing connection.
Aug 11, 2009 11:53:34 AM [Warning]: Network input/output exception has occurred: Error during read
Aug 11, 2009 11:53:34 AM [Info]: Phase JSPM/JSPMPhases/JSPM_MAIN has been completed.
Aug 11, 2009 11:53:34 AM [Info]: Start time: 2009/08/11 11:45:25.
Aug 11, 2009 11:53:34 AM [Info]: End time: 2009/08/11 11:53:34.
Aug 11, 2009 11:53:34 AM [Info]: Duration: 0:08:08.764.
Aug 11, 2009 11:53:34 AM [Info]: Phase status is initial.
Plz help me on this to analyze regarding the check queue sapjup-queue .
Thanks in Advance.
Regards,
Hari

SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")

Hello all,
can you pls suggest me smth for this:
I am running solman_setup and at phase 5.1 (Configure Web dispatcher) and I have errors:
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")
L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC)
L2 - Failed to reach test WS through ICM
I choosed: No SAP Web Dispatcher used
What I did:
1. re-created users SM_EXTERN_WS and SM_INTERN_WS
2. added table HTTPURLLOC with the full hostname and the port
3. created SSL server standard certificate in STRUST and its green
4. instance profile>>add login/accept_sso2_ticket=1 and login/create_sso2_ticket=2
Thx for any suggestion
Chris

Hello,
I read note 1094342 - ICM trace contains verification of the server's certificate
and I installed in the IE browser the PSE saved from /strust
Thx for any idea
[Thr 140736729089792] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL[Thr 140736729089792] session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLA.pse"[Thr 140736729089792] SecudeSSL_SessionStart: SSL_connect() failed[Thr 140736729089792] secude_error 536872221 (0x2000051d) = "SSLAPI error"[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 FALSE[Thr 140736729089792] >> Begin of Secude-SSL Errorstack >>[Thr 140736729089792] 0x2000051dSAPCRYPTOLIB SSL_connect[Thr 140736729089792] SSL API error[Thr 140736729089792] Failed to verify peer certificate. Peer not trusted.
][Thr 140736729089792] << End of Secude-SSL Errorstack[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 TRUE[Thr 140736729089792] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"[Thr 140736731203328] SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"[Thr 140736731203328] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL[Thr 140736731203328] session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLS.pse"[Thr 140736731203328] SecudeSSL_SessionStart: SSL_accept() failed[Thr 140736731203328] secude_error 536875078 (0x20001046) = "SSL API error"[Thr 140736729089792] No certificate request received from Server[Thr 140736731203328] >> Begin of Secude-SSL Errorstack >>[Thr 140736731203328] 0x20001046SAPCRYPTOLIB SSL_accept[Thr 140736731203328] SSL API error[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl23_accept[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl3_read_bytes[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] << End of Secude-SSL Errorstack[Thr 140736731203328] <<- ERROR: SapSSLSessionStart(sssl_hdl=1315bf0)==SSSLERR_SSL_ACCEPT[Thr 140736731203328] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT[Thr 140736729089792] <<- ERROR: SapSSLSessionStart(sssl_hdl=7fffcc023860)==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736729089792] <<- SapSSLErrorName()==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736731203328] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn_mt. 1713][Thr 140736729089792] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED {000f3a6b} [icxxconn_mt.c 1989][Thr 140736731203328] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736731203328] in: sssl_hdl = 1315bf0[Thr 140736731203328] ... ni_hdl = 92[Thr 140736731203328] NiICloseHandle: shutdown and close hdl 92/sock 41[Thr 140736729089792] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736729089792] in: sssl_hdl = 7fffcc023860[Thr 140736729089792] ... ni_hdl = 223[Thr 140736729089792] IcmConnConnect(id=15/14955): free MPI request blocks[Thr 140736729089792] MPI<5909c>85#7 GetInbuf -1 21d220 1757 (1) -> MPI_EOS: End Of Stream

RW-50004: Error code received when running external process.

Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1

Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald

An error has occurred during download. Please try again later.

Starting yesterday whenever I try to create a package I receive the following error:
An error has occurred during download. Please try again later.
The error appears with a yellow exclamation point next to each of the titles included in a package. I also receive the error on machines that I have used to package previously and have caches of the programs already. Is anyone else seeing this issue?
Thanks.

Hi csteelatgburg,
Please review the given kb: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html#Downlo ad products and updates indicating possible reasons for download issues..
Regards,
Romit Sinha

Got an error message -43 during back up step of recent update

Received an error message (-43) during back up step of recent update attempt to iOS 5 for my iPhone 4. Tried several times with the same error message. Anyone know how to get around this issue?

And now, with the new iCloud Control Panel 1.1, still an error, in English this time:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
I was able to click the Report button, here's the beginning of the text it emailed:
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: CopyPSTFoldersToCache
Error: 0x80004005: GetZ1Store
Error: 0x80004005: HrGetOneProp on Z1Store failed
AppleOutlookDAVConfig version: 3.2.16.0
Windows version (6.1.7601): Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Outlook version: 14 (14.0.6109.5005), x64
Outlook location (installed): C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
MAPI location: C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Hotmail Connector Store Service, 975C4FC305EB4BBBB1992A7570EC7CF9
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
[Services]
NOTES=Lotus Notes Mail
MSN_CON=Microsoft Outlook Hotmail Connector
APLZODSERVICE=iCloud
[NOTES]
PR_SERVICE_DLL_NAME=nwnsp.dll
PR_SERVICE_SUPPORT_FILES=nwnsp.dll
PR_SERVICE_DELETE_FILES=nwnsp.dll
PR_SERVICE_ENTRY_NAME=ServiceEntry
continued...

Error(s) occurred during publish assembly

Hi !
I have a problem with my application, i don't know. please help me
Publishing failed
Error with publish task 'WebServicesProjectBuildTask'.
Error while compiling web services in Web19.
weblogic.wsee.tools.jws.build.CompileException:Error compiling web services.....
Error(s) occurred during publish assembly. No modules will be published.

I am also facing the same problem,
The Error logs are as follows:
Publishing failed
Error with publish task 'Controls Assembly'.
Controls assembly failure running assembly on standalone WAR 'test'.
org.apache.beehive.controls.api.assembly.ControlAssemblyException: Assembly infrastructure exception
java.lang.ExceptionInInitializerError: null
java.lang.RuntimeException: com.bea.xml.XmlRuntimeException: java.util.zip.ZipException: The system cannot find the path specified
com.bea.xml.XmlRuntimeException:
java.util.zip.ZipException: The system cannot find the path specified
java.util.zip.ZipException: The system cannot find the path specified
Error(s) occurred during publish assembly. No modules will be published.
And if try to publish it again, i receive error as :
Publishing failed
Error with publish task 'Controls Assembly'.
Controls assembly failure running assembly on standalone WAR 'test'.
org.apache.beehive.controls.api.assembly.ControlAssemblyException: Assembly infrastructure exception
java.lang.NoClassDefFoundError: null
Error(s) occurred during publish assembly. No modules will be published.

Cannot log into iMessage or FaceTime it says an error has occured during activation

i could not send or receive iMessage would not let me log in to iMessage or FaceTime it says an error has occured during activation.

Hi Cam-Fox22,
I have had this problem and tried everything suggested without success until last night. I took the plunge and did a Factory reset which cured the problem. Of course you must do a back up to iTunes first. I connected the iPad to my PC via a cable and then loaded iTunes. Log in to the account associated with your iPad and then carry out a backup of your iPad including apps and purchases. Then hit reset option near the top of the page and hit again when asked if sure. It takes a while to download the software but eventually it wiped the iPad and loaded it with fresh software. Keep your iPad connected and then restore from back-up when given that option. When it is all finished you will have your iPad back just as it was before you started but with iMessage and Facetime both working again.
Good Luck John

Error 1074396154 received during delayed trigger.

Similar Messages

Maybe you are looking for