Error 109 - Solution 1 did not work. Help me, please.
About a month ago, I was able to download the PS trial completely fine with no problems. It's since then been uninstalled and everything. I'm now learning Dreamweaver, but I can't get the trial download to work. Everytime I try, I get error 109 - a network connection problem or a destination disk problem. My connection is fine (though I did try another one to be sure), and I've tried both my user folder and desktop as destination disks.
I have tried everything in "Solution 1" of that FAQ page or whatever, but it hasn't worked. I've also tried the direct downlaods with no luck. I've used both the Adobe Download Assistnat and the Adobe Application Manager, but they both stall and stop the download in the same way.
I'm on a MacBook Pro with Moutain Lion OSX.
I'm using Google Chrome.
I've tried reinstalling the Adobe Download Assistant a few times.
This is the typical message I get:
Any tips? I've been wrestling with this since Saturday, October 6th.
Thank you for your time and assistance!
Dudley
For the direct download did you try the process documented at http://forums.adobe.com/thread/981369? If so then it is likely an issue with your Internet connection. Try plugging in via Ethernet if you are on Wifi. If you are already connected via Ethernet then you may need to try a different Internet Service Provider.
Similar Messages
-
After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me
Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1). -
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U
Please turn off your caps lock.
See http://support.apple.com/kb/HT1212. -
i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
i updated my ipad in ios 6Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off. -
HT1212 I tried doing the itunes method to unlock my iphone 4 but i did not work, help!
I did it & did not work i'm still locked out. what can i do to try to unlock it now??
I'm sorry, the only time that you have to restore as new is if you are trying to restore because of a forgotten restrictions code, or if you have never synced the phone via iTunes before. Read the support document http://support.apple.com/kb/HT1212 and makes no reference to not using a backup if you have synced the phone in the past.
-
Multiple Event Viewer Error Ids, Corrupt Catalogs, System not working right. Please help.
Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won't let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can't do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:\User\App Data\Roaming\Microsoft\Templates\Local\Microsoft\Windows\WebCache\V01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\system32\IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:\Windows\system32\msiexec.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer: w7mar-64 "I don't know why it has computer as this when it should not be."
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer: w7mar-64
Description:
An errorUser: LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User: NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User: N/A
Computer: w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or Builtin\Administrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) - Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
6 user registry handles leaked from \Registry\User\S-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Internet Explorer\Main
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name "WHITEFOXPC :0" could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
0x%08x (0xc0041800 - The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error "1084" attempting to start the service MSIServer with arguments "" in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can't copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume \\?\Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}\. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory \SystemRoot\System32\LogFiles\HTTPERR\httperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-FoxPlease provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry -
HELP!!
help with what? you're providing no information.
"it does not work" means nothing. What specifically is the problem? -
My z10 speakers are not working help me please
Hello
I bought the BB Z10 last week and after 5 days i found that the speakers are not working ,i have tried everything such taking the batter,restart,format etc
i have found so many people have the same situiation that i ave with my bb
what should i do ??Hello Doss188.
Do not reboot the Z10 or tried to get the battery for a minute to see if it works?
Regards.
Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
@ gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
Trying to set up wireless printer. error message says: "wireless radio not working" help.....
I have no knowledge of a "wireless radio" muchless of how to "turn it on"
I think the printer's radio (the device it uses to communicate with your wireless router).
If it is convenient, you can plug the printer into your router using an Ethernet cable for the same functionality as it being wireless. I can help if you want.
If that is not convenient, please contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Getting hundreds of emails from community forum. Have tried changing email preferences. HELP PLEASE
no it isn´t.
I already had these settings but still received 100+ mails a day with lots of topics I never even had read...
now I deactivated ALL notifications. -
Interactive ALV not working - help me please
Hi all,
This is my first time here and I hope somebody could help me out with this.
I have created an interactive ALV report in OOP. I have screen 1000 which contains the selection screen, and 2 custom controls. What I wanted to do is that when I select from the screen, data will be populated on the 1st ALV. Then when I double click on any item on my 1st ALV, it will do another selection and data will be displayed on the 2nd ALV (while 1st ALV contents remain). And when I double click on any item on the second ALV, it will call a transaction.
Quite complex. But the event for my 2nd ALV is working, it's able to call a transaction. What puzzling me now is the event on my 1st ALV. Data selection is okay, but data are not populated on my 2nd ALV. It only shows data in the 1st ALV. Somebody please help!Hey Ayem...
There is a other place to post your thread.
Expert forums -> ABAP development -> UI Programming or ABAP general
link: User Interface Development in ABAP
All the best,
Thanks,
Naveen.I -
Apple Configurator Device Backup Not Working - HELP ASAP Please
Hey Everyone!
We are trying to backup one iPad so we can take that backup and add it to all of our other iPads....
In Apple Configurator I've added all of the apps, setup a profile, etc.
On PREPARE, At the top I go to DEVICES and click on BACKUP. It gets to the "archiving" part of step 1 of 2 and I receive a popup saying "Could Not Create a backup. The device was disconnected... check the usb connection to this device".
I'm going to assume this has nothing to do with my USB connection as I've tried several ports and several cables.
We really need to get this backup and restore it onto all of our ipads as soon as possible.
This is our first time using apple configurator!
Thanks so much!
Any help would be greatly appreciated!!!Let's get your iPhone back up and running reeset12! My first recommendation is to try a soft reset by holding down the power and home keys. If the device doesn't respond, I recommend connecting it to a computer via the usb cable. If you are unable to get past the logo screen in either case, I recommend a hands on evaluation at a store location.
http://bit.ly/3SdsA
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
My speaker systems are not working help me please
i have a speaker systems sbs vivid 80 they look ok the light is on when i swich them on but they are not working
Try testing the speaker on another audio source and see if it works.
Jason -
HT201210 my newly brought iphone 6 is not working help me please!
i connected my newly bought iphone to itunes and press update then suddenly it prompts me that it can be updated i needed to restore so i restore it and again it alerts me that it can't be restored. what will i do?
You likely have some security software (e.g., firewall) getting in the way.
Resolve issues between iTunes and security software - Apple Support
Maybe you are looking for
-
hi i want to unlock my iphone 4s to use it in jordan , i have bought it from cousin and the phone is only work on verizon please help me to unlock it
-
I bought a boxee box so I could use airplay. But the videos no longer work, I have sound but no picture. Why?
-
How i backup my contacts to other computer in itunes
how i backup my contacts from one pc to another pc
-
I got an error in the RUNALLOCATION LOGIC VALIDATION
Hi, I got an error in the RUNALLOCATION logic validation. The error message Dimension (NULL) was not found The logic: *RUNALLOCATION *FACTOR=0 *APP WHAT=CorpBudget; WHERE=CorpBudget; USING=CorpBudget; TOTAL=CorpBudget *DIM Project WHAT=[SCTSQ1]="Y";
-
Sales Order Line Item Confirmation.
When are running delivery due List, there are few sales orders remaining even delivery creation is done for all the sales orders. Reason for that is sales has got confirmed through V_V2 Transaction i e sales order allocation. but actually there is no