Error 1156 in LV7.0 when Read File

Hello,
we programmed a software with LV6.1.
Now we use LV7.0 and we have a problem to open
old binary data files with it. If we want
to open a file with "Read File" it occurs the error
"1156". We change nothing at these routines, everything
works with LV6.1.
Has anybody the same problem or know whats to do?
Best Regards
Patrick Frank

Patric,
This problem has already been reported to NI, and the LabVIEW team is currently investigating a solution. From what I can tell, it looks like the problem occurs when trying to read a datatype that is not in the file. This will result in the misleading out of memory dialog.
Make sure that you specify the correct data type to read.
Other than that, I have no workaround information.
How Do I Read and Write an N-Dimensional Array to a File in LabVIEW
Zvezdana S.
National Instruments

Similar Messages

JDOM "IllegalStateException: Root element not set" when reading file

Hello, I am relatively new to XML. I am trying to read an xml document to parse some information out of it. I basically have a large amount of data I want to load into my program. I could program it all in as static arrays, but I thought xml would be easier, and make changes easier.
I am trying to use JDOM, and have the project set up. My problem is when I read the document, it always gives a root element not set exception. Here is my xml file:
<?xml version="1.0" encoding="UTF-8"?>
<root>
    Contents
</root>Very basic, I'm using this to get things started. Here is my code for reading it:
        SAXBuilder sb = new SAXBuilder();
        Document d = new Document();
        try {
            sb.build(new File("test1.xml"));
        catch (JDOMException jdome) {
            System.err.println(jdome);
        catch (IOException ioe) {
            System.err.println(ioe);
        d.getContent();Whenever I try to do anything with the contents of the Document, like d.getContent(), it always throws a java.lang.IllegalStateException: Root element not set. It reads the file successfully (as far as I can tell), but it's like the xml file is empty. I can't find anything on the web about this problem, and every tutorial says to do exactly what I've done, but never mention any possible problem. It can find the file, and I can write to an xml file as in other tutorials, but reading one in is a problem.
I chose JDOM because it seemed simplest for just reading in a large amount of data and parsing it out into variables. This is a very simple project, so I don't want to spend a lot of time writing xml parsing code, I'm only using xml because it will probably be easier than hard coding the data. Would a different xml api be easier to use for my purposes?
Message was edited by:
hunter9000

You must always give the browser an either an absolute URL from the top of
          the web server (not the
          web application) or a relative path from the current page.
          Sam
          "Vijay Kumar" <[email protected]> wrote in message
          news:[email protected]..
          > Hi
          >
          > I get the 'getResource is called when document root is not set.' error
          > when I access any files in the webapp with their absolute path.
          >
          > Environment: WIN/NT SP3, WL5.1 SP5 as the webserver and app server.
          >
          > My webapp located in d:\temp is deployed as foo
          > weblogic.httpd.webApp.foo=d:/temp
          >
          > For example:
          > I can access a file in d:\temp\secured\home.html using
          > test
          >
          > However if with in an html I try to access the file using the abs path
          > from doc root
          > test I get an error
          >
          > and I guess the default servlet looks for the servlet-context named
          > 'secured'
          >
          > Can someone tell me if I can set the documentRoot in the web.xml or
          > weblogic.xml
          > file OR if there is any other way to access to the file using the abs path
          > of /secured/test/test.html
          >
          >
          > Thanks in advance
          >
          > Vijay
          >
          >
          >
          >

EXC_BAD_ACCESS when reading file in viewWillAppear

Hi,
When I'm loading my main view in loadView function I show a modal view with list of file names. When the user chooses the file name I show a modal view with password request. If the password was correct, I dismiss password view and in the viewWillAppear of the chooseFileView open the requested file and immediately call
[self.parentViewController.navigationController dismissModalViewControllerAnimated:YES];
in order to return to the main view controller and update it with the data I've got from the file.
For some reason, I get the following stack:
#0 0x925f1907 in __forwarding__
#1 0x925f1a12 in _forwarding_prep_0__
#2 0x964ea20f in NSPopAutoreleasePool
#3 0x30a65502 in _UIApplicationHandleEvent
#4 0x31699522 in SendEvent
#5 0x3169b88c in PurpleEventTimerCallBack
#6 0x92572615 in CFRunLoopRunSpecific
#7 0x92572cf8 in CFRunLoopRunInMode
#8 0x31699d38 in GSEventRunModal
#9 0x31699dfd in GSEventRun
#10 0x30a5dadb in -[UIApplication _run]
#11 0x30a68ce4 in UIApplicationMain
#12 0x00002646 in main at main.m:14
with EXCBADACCESS in
2008-11-13 21:57:28.349 SafeWallet[4822:20b] * -[NSConcreteData release]: message sent to deallocated instance 0x4707d50
How do I trace this exception? I don't have any data of type NSConcreteData. What it can be?
May be all these modal views should be handled in other way?
Thanks,
Nava
P.S. I found on some thread, that I can enable Zombie environmental variables, but how can I see a proper stack on debugger?

Well - I'll shoot straight with you... I hate looking at that stack stuff. I walk paths through my code until I've isolated the problem area - and look at the objects I'm using - it usually revolves around "over-Release]-ing". and remember to break in drawRect and stuff - it's on a separate thread.
I use diagnostics like...
NSInteger huh = [dumbObject retainCount];
and look at that var after i pass through it in debug mode... Odds are I thought I'd retained something after ripping it's lifeless form out of an array and oops... I killed the poor thing.

Problem with READ DATASET when reading file from app server

Hi,
wondering if anyone can help, I'm using the following code to read from a file on app server, the file is of type .rtf
OPEN DATASET file_rtf FOR INPUT IN TEXT MODE
ENCODING DEFAULT
WITH SMART LINEFEED.
DO.
READ DATASET file_rtf INTO string.
IF SY-SUBRC = 0.
EXIT.
ENDIF.
ENDDO.
the open dataset part works sy-subrc = 0, but the read returns sy-subrc = 8 and no data is passed to string.
Any ideas as to what is causing this problem appreciated, <removed>
Thanks
Edited by: Thomas Zloch on Mar 17, 2010 3:57 PM - please don't offer p...

Hi Adam,
The source code in the below link has details about how to read/write to application server.
[Application server file operartions|http://www.divulgesap.com/blog.php?p=NDk=]
Please let us know if you have any issues.
Regards,
Ravi

Dynamic folder name (when reading file in file adapter)

Hi,
I have to read a file always with the same name but it can be in different directories.
For example:
FTPHome/Folder1/file.txt
FTPHome/Folder2/file.txt
I've tried to define a mask for path name but it doesn't work:
Something like this /FTPHome/Folder*/
It's possible to do that what I'm trying

Sudharshan nice... indeed you are right! You learn something everyday
Advanced Selection for Source File
If you want to set an exclusion mask for the File Name specified above, or if you want to specify multiple directories using a file name mask and exclusion mask, set the Advanced Selection for Source Fileindicator.
○ Specify an Exclusion Mask for the file name specified above.
You want to process all files that have the extension '.txt', but want to exclude all files that begin with the letter 'a'. To do this, enter .txt for File Name, and a for Exclusion Mask.
○ You can enter additional specifications for source directories, file names, and exclusion masks in the table. This data is processed in addition to the details specified above.
Edited by: Alex on Jul 8, 2008 11:11 AM

Permission denied when read file with setGID

I'm using a NFS system. I noticed that once I set setGID to a file, e.g.
chmod g+s myfileThe file become un-readable (even root user is not able to access it). if I try to read, i got:
tail myfile
cannot open `myfile' for reading: Permission deniedWhat could be problem? using ls -l or getfacl, I can see owner,group, other all have read permission though:
ls -l
-rw-r-Sr--+ 1 oracle dba 5 Sep 19 07:51 myfile
getfacl myfile
# file: myfile
# owner: oracle
# group: dba
user::rw-
group::r--
mask::rwx
other::r--

Using the nosuid option is a good idea and you should consider using this with all NFS mounted disks. It means that the server's root user cannot make a suid-root program on the file system, log in to the client as a normal user and then use the suid-root program to become root on the client too. http://tldp.org/HOWTO/NFS-HOWTO/security.html
You could ask your system administrator to check file permissions on the parent directory, but it will require a more in-depth review of your configuration to analyze what's going on, and this is not possible unless you provide more information.

Checking for EOF when reading files

hi all, the code below only reads from halfway through the file, and at the end it throws an EOFException. i thought that "while (os.readObject() != null)" would prevent this, but apparently i need to use something else. can someone help? thanks.
       load.addActionListener(new ActionListener()
           public void actionPerformed(ActionEvent e)
               try
                  FileInputStream in = new FileInputStream("test.txt");
                  ObjectInputStream os = new ObjectInputStream(in);
               while (os.readObject() != null)
                  System.out.println((String)os.readObject());
               os.close();
               in.close();
                  catch (Exception ex)
                  System.out.println(ex);
       });

I thought that "while (os.readObject() != null)" would prevent thisWhy did you think that? The javadoc doesn't say that anywhere.
What you will get is a java.io.EOFException.
As the other posters have said, you are skipping every odd-numbered object in the file with your present code.

Error when reading the data of infoprovider

Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
Heinz

Hi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit

Frm-10221: Cannot read file ACTIV

Dear,
while running a form this error message appears
frm-10221: Cannot read file ACTIVhere ACTIV is the mmb file. i can add the attached library but i think this file is not working?
Thanks in Advance.
Stalin Ephraim

I faced a similar issue and your solution worked a charm. Thank you. Although the menu was already compiled, I had to re-compile in order to resolve this.

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Intermittent 'Unable to read file' error when exporting/opening .html to .xls

Hi, hope someone can help.
I have an issue where I export a report from the Salesform platform to Excel. The file that is being exported is in html format and the report does not include any Pivot tables.
The 'Unable to read file' error occurs intermittently, when Excel is already open and you export/open it from Salesforce...
Have tried using Excel in safe mode with all the add-ins disabled and still no joy. The
Do not save encrypted paged to disk option has been un-ticked the in Internet Options -> advanced.
The issue happens in IE and other browsers, after raising the issue with Salesforce support they advised to raise the issue with MS instead, so here I am to see if anyone can help!
Any help would be much appreciated

Tools>Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
check your GPO settings to see if you have configured this to be unchecked.
Thx.
Rob^_^

When downloading itunes updates, i get an error that reads file folder for itunes media has an invalid character

The error message read "file folder iTunes media has invalid character".

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error when reading back a binary file

Hello,
I am writing out a binary file consisting of U32 arrays, packed strings, and clusters. I get error 116 when reading back. As long as I am synchronized on the correct data position why should LV care what I write to the file? In the example I write a simple 16 element array and a time stamp cluster. When reading back the array I get the error. What is the correct way to do mixed structures? Thanks.
Attachments:
file write.PNG ‏44 KB

David,
You can solve the problem in various ways. The easiest might be to modify the writer VI by wiring a True constant into the "header (F)" input of your first Write File node. That forces LabVIEW to include a four-byte header that specifies the length of the array you are writing.
When you wire up the reader code the way you did, the length of the array you wire to the "byte stream type " input is irrelevant; by wiring nothing into the "count" input, you are implicitly telling LabVIEW to look for a header to determine the length of the array you are asking it to read. Because you didn't write any header, LabVIEW is interpreting the first four bytes of the array itself as a length. That length doesn't match the actual amount of data present in the datafile, so LabVIEW generates your error.
An alternative solution would be to leave the writer unchanged and modify the reader VI: wire an I32 constant into "byte stream type" and wire a 16 into "count". The choice depends on what you prefer and whether or not these binary files need to be compatible with some other program or not.
Another aside: you can dispense with your case that checks whether the datafile already exists. Just change the function input of the Open/Create/Replace to "create or replace" and wire a False constant into its "advisory dialog" input.
Hope that's clear,
John

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Error 1156 in LV7.0 when Read File

Similar Messages

Maybe you are looking for