Error 150:30 with re-installed software

I just changed computers and transferred my profile through time machine from a Mac to a new Mac. All my programs were transferred but when I try to launch any product of the suite CS4 I purchased and activated on my previous computer I get a message saying "Licensing for this prodict has stopped working...error 150:30".
Please let me know what I have to do to get the software working properly again.
Thank you very much.

Try http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
With Adobe software, it's usually better to uninstall and reinstall so that the licensing mechanism is set up correctly.

Similar Messages

  • How do I overcome error 150:30 with a replacement system hard drive on a Mac Pro?

    I have replaced my system hard disk drive on a Mac Pro and used Mac 'Restore' to restore the complete system from a Time Machine backup. Everything else works correctly, except my current Adobe products (InDesign CS4 and Photoshop CS4) both give a licensing error code 150:30 and each suggest contacting Adobe technical support.
    Can you help?
    Blair Cramond 

    Thanks for your reply. Is it necessary to uninstal the existing CS4
    products before re-installing?
    Ned Murphy <mailto:[email protected]>
    5 May 2014 13:14
    >
          How do I overcome error 150:30 with a replacement system hard
          drive on a Mac Pro?
    created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in
    /Downloading, Installing, Setting Up/ - View the full discussion
    <https://forums.adobe.com/message/6354088#6354088>

  • I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

    I get an error message when trying to install software update 4.2.8
    "problem downloading, network connection timed out. Check network connections."
    Anyone one else had this problem?

    Brian-KK Sabah wrote:
    I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
    See Here for your Error Message -3259
    http://support.apple.com/kb/ts2799

  • Upgrading from OSX 10.58 to 10.6 - any problems with previously installed software anyone?

    I was wondering if anyone had had any problems with their current software after installing 10.6? (I'm asking because I have a substantial investment in the Adobe Creative Suites and don't want to lose it.) Has anyone had any problems after installing 10.6?  Thank you in advance for any replies.

    I would check the Adobe web site to see if it will be compatible.  If there is an issue you may consider a partitioned HDD and run the two OSs each on separate partitions.
    Ciao.

  • Error 150.30 with Photoshop Elements

    My Windows 7 PC died, and I've transferred photographs to my old Dell XP machine.  When I execute Elements, I get the error 150.30 message asking me to restart the maching.  I did that, but still get the error when executing Adobe.

    Try:
    http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

  • Wanted to buy MBP 15'' with already installed software...

    Wanted to buy MBP 15'', and wonder if it's possible to order MBP at Apple store with already installed Parallel Desktop and Windows Xp Professional. Just wanted to have ready-to-use MBP. WinXp Professional - is essential for me.

    From the Apple Store… no you can't. However, you might want to call them about contracting them to do it. The problem you have is that the Apple Store does not sell Windows licenses so you would need to provide it to them. Your best would be to find an Apple reseller thay'll do it for you as the Apple Store will not.

  • CS4 error 150:30 with Yosemite

    Hello
    I've tried everything all 9 "solutions" here: Error "Licensing has stopped working" | Mac OS
    including a reinstall of Yosemite. Nothing works.
    I have the Adobe CS4 cds, with box and serial numbers, one computer running it... etc
    Please help!

    I'm working on the same sort of problem...
    Some people say their CS4 still works on 10.10, so I'm trying to make it work.
    Apparently, migrating/restoring from a backup is something adobe doesn't like, so it either gets scrambled or deauthorizes your computer.
    Did you uninstall CS4 this way?
    Like Gener7 said:
    Uninstall, check Remove Preferences
    Do a Repair Permissions from Disk Utility
    Reinstall from discs, and if you do not have them, download from here:
    Download CS4 products
    (Updates here:)
    Adobe - Photoshop : For Macintosh
    Or try what they suggest here:
    150:30
    Oh, and make sure everything's updated.
    Hope that helps!

  • Associate data with re-installed software?

    I have been a palm user since it was born and have never had a problem such as this. Nearly 2 weeks ago I came down with a nasty virus and have had to reimage my hard drive. I saved the palm data onto an external drive. I installed the desktop software off of the disc that came with my handheld and it asked if I wanted to get the latest software from the internet, which I did. When I went to hotsynch the Centro it wouldn't recognize my palm and said that I needed an updated version for Verizon - which I did, but then it wiped the device clean. I figured that wouldn't be so bad, since I had back up data. The problem is, now the desktop program is clean and my Centro is clean, and the data from my 2/28/2010 hotsynch is sitting in the drive with no way to get into the program. How does one go about telling the Palm OS Desktop where to look for this data? Thanks for any and all help.

    This is not an official solution, but assuming you used the same username when you set up HotSync, I'd copy the folder named with your username from your backup over the one on your C drive and then fire up Palm Desktop and check whether it can "see" the data.

  • Error 1720 - When trying to install software for a Plantronics CS60 headset

    Hi Everyone,
    Getting an Error 1720 when I tray and run th setup installer for a new Plantronics CS60 USB headset.
    I have been told it's a missing windows driver.
    Anyone know what's going on here...?
    Many Thanks

    Yes the e-mail response you received is from your posting in Downloading, Installing, and Setting Up forum.  You can respond to the forum thread at http://forums.adobe.com/message/5060755#5060755.
    If you are looking for assitance with the log file then I would recommend posting to the Adobe AIR installation issues forum at http://forums.adobe.com/community/air/installation.

  • Satellite A200: error message - minimum requirements to install software

    Then there is another problem.
    I tried to install it but it shows error:
    This computer does not meet a minimum requirements for installing the software. Setup will exit.
    Can you please tell me why.
    I have already installed new BIOS and OS is Vista.

    The Vista needs more computer resources as another Windows OS.
    Possibly the OS needs all the computer resources like RAM, etc.. and therefore the 3rd party software cannot be installed.

  • What will happen with my installed softwares?

    Hi I am using MacBook Pro with C2D and having latest version of SL. But I have installed lots of software useful for my business including virtual machine and I am using Windows 7 ultimate on it. So I am wondering what will happen if I upgrade this to Lion? Do I need to install everything again or it will be as it is like on my snow leopard?

    I don't know about VMware, but I can tell you that when I opened Windows XP the first time in Parallels after upgrading to Lion, I had to re-setup the virtual machine. Other than this, no problems. CS3 and older WILL NOT run in Lion, but CS4 and newer run without problems.
    Go to About this Mac > applications, and here you can see which of your applications are PowerPC, thus not compatible with Lion.
    Cheers

  • Fatal Error message when trying to install software

    I get a "Fatal Error: Required NIPathsDir property CVIDIR is undefined"....   when running the Labview 8.2.1 installer ..  The solution for KnowledgeBase article on this problem was either incorrect or was unclear in exactly how the solution was to be implemented... 

    ClintM....
    Yes .... I have a "My Documents" folder in the standard location and I am logged on as administrator....  I've got the "Academic Site License Spring 2007 Labview Core"   installer disc (DVD) but I can't find a version # of the installer.   I'm trying to install Labview 8.2.1 on a Sony Vaio Laptop....
    Engtech4

  • Store bought cs5 design premium student teacher edition, trouble with re installing software ,ref not accepting serial numbers etc,from an earlier install ?

    do l have to aquire a different serial number to re deploy cs5 software on to the same computer after a harddrive clean .cs5 had been bought from a store and installed at a previous time

    Richard Schonberg are you utilizing the serial number registered under your account at http://www.adobe.com/?  You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • "Connector Specific Error" when synchronizing with BlackBerry Desktop Software

    Hi
    i have a connector specific error when I synchronise my contact.
    that's my iloptcfg.cfg
    [General]
    ErrLogMaxSize=500000
    ErrLogBackups=0
    TraceDetail=0
    TraceLog=0
    UseNtEventLog=1
    UseThreadIDLogFileNames=0
    AttendeeDisplayNameOnly=0
    [ilwin]
    HeapLogging=0
    MultiJobTraceLog=1
    EngineTracing=799
    ILXflags=0
    TranslatorLogVerbosity=0
    SingleSessionXlateLogs=0
    ILTRflags=0
    TifLog=0
    LoggingFilter=0
    ILLOGflags=0
    DirectionForRecurringRemove=0
    AutoCleanse=1
    HistoryFileCompression=0
    AllowTwoTierHistoryFiles=0
    XlateLogBackups=0
    HistoryFileBackups=1
    [CAAR Options - Contact]
    Add Empty KF Records=0
    Perform Email Matching=0
    and my PtTrace.log
    Sat Jun 05 00:38:41 2010 -- Intellisync Log File --
    Sat Jun 05 00:38:41 2010: Error Failed to retrieve field on the device.4238 at RIM:eviceIConnector.cpp line 1415
    Sat Jun 05 00:38:41 2010: Error 4.4 at .\sdk_data.cpp line 3846
    Sat Jun 05 00:38:41 2010: Error 4238.4087 at .\ciltrans.cpp line 1077
    thank yo for your help

    Hi and welcome to the forums!
    Here is an article on how to resolve the problem.
    Thanks,
    Bifocals
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Everytime I open GarageBand, I get the following error message: an error has occurred with an installed audio unit plug-in...what is this and how do I fix it?

    HI, I am new to this and trying to open this app but keep getting this message.  Anyone help me define this and a fix if needed, thanks.

    Try reinstalling the software.

Maybe you are looking for