Error -1618 when trying to uninstall, and shuffle doesnt show up in sources
Hello, and thanks for your time,
well i recently had trouble with my ipod shuffle, at first the green light wouldnt turn off, so then i reset it (toggeled the switch up and down) and then it no longer had any songs on it. Fine, so then i attempted to plug it back into my computer through a usb cord, and it wouldnt recognize it, so i tried the other six, and still no luck. I then uninstalled itunes and the ipod programs, and installed them once more. However they werent functioning properly because my computer froze or the programs wouldnt run (programs ei. ipod updater) so i uninstalled once again and attempted to install them once more. However i couldnt, an error interrupted the process and it didnt fully download, so i tried to uninstall, and and error box, during the uninstallation process pops up and says (Error -1618 Another installation is already in process Complete that installation before proceeding with this install). So i can no longer uninstall it to reinstall it. Please help, its driving me nuts
my ipod 512MB (First Generation)shuffle is not
reconized in itunes,My computer, or in yamipod.
Before when i plugged it in it did nothing, its light
doesnt came on so it didn't charge. But now it does
charge BUT It dont show up in iTunes, My computer,
yamipod. In yanipod it says 'please plug your ipod to
continue. In iTunes it doesnt even show up in the
Sources list. And in My computer it doesnt show up.
It doesnt even show up as storage/removable device.
SO I Cant add any new songs. AND I hav so many new
song i want 2 add. I have tried other computers and
did most of what teh Apple articles said,even the
ipod shuffle like Reset Utility. I was given this
shuffle as a girt on June 14 2006. My shuffle had the
problem of not being reconized at all once before but
after a couple of weeks it went away.
Go here to find out if it's still covered by warranty:
http://www.apple.com/support/contact/
Similar Messages
-
Error 1618 when trying to uninstall Labview Runtime system.
Hello list,
I'm trying to uninstall the following on a Windows 7 machine: LV2011 runtime, Max 5.11, Visa runtime 5.1.1 & Datasocket Server.
I got an error 1618 with Windows Control Panel & MSIBlast.
I have full Admin rights on the box - Any ideas, or should I just re-image the HD & start over?
Thanks,
MikeI seem to be having a similar issue. I have several version of LabVIEW installed (8.5 through 2012) as well as NI-VISA, NIDAQmx and 488.2.
I recently installed a very old executable application that was built in LabVIEW6. This also installed the LV6 RTE. The application seemed to work and when I was done with it, I uninstalled it. Now, I can't say for sure that this is what caused my problem as I did not try running any of my newer applications or LV2012 immediately after this. But since that time, my executables built in LV2012 won't load. They simply crash and give me an option to send a report or not. My LV2012 environment seems to work fine except that when I try to close it, it won't close. I have to force it to close.
I tried uninstalling my executables through the control panel. I get a message indicating that something is already in the process of installing and I should wait until it is done. There is nothing else installing.
I tried uninstalling all of the NI software through control panel. I get the error 1618 and nothing uninstalls. I tried repairing, as suggested in the linked post, I also get the error 1618.
So, right now, I am stuck. I can run my applications through LV. But I can't run the executables. I also can't uninstall and start over.
I could turn my PC over to our IT department to image the hard drive and start over. But that will kill at least a day to reimage and another day to reinstall everything to get back to normal.
I am running Windows 7 32 bit OS.
Any thoughts? -
HT201210 what is error (1618) when trying to restore an iphone 5
what is error (1618) when trying to restore an iphone 5???
Try uninstalling iTunes, restart your computer and re-install iTunes.
-
Question - error message when trying to sync and download music iPhone.
Same problem with my iphone too
is ur problem resolved? -
Error -1 when trying to restore and update iphone 4s
After trying to update to new software 5.1 i got Error -1 when trying to restore and update iphone 4s via itunes
here part of iphone upadate log may help, i could not post all log it's too long
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11207986 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.229405 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 6.138110 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem booted
bbupdater: Ping failed, 9 tries left
bbupdater: Ping failed, 8 tries left
bbupdater: Ping failed, 7 tries left
bbupdater: Ping failed, 6 tries left
bbupdater: Ping failed, 5 tries left
bbupdater: Ping failed, 4 tries left
bbupdater: Ping failed, 3 tries left
bbupdater: Ping failed, 2 tries left
bbupdater: Ping failed, 1 tries left
bbupdater: Ping failed, 0 tries left
bbupdater: END(kBBUReturnIOError): Preparing Initial stage
bbupdater: END(kBBUReturnIOError): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: bbupdater error: kBBUReturnIOError
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/10
unable to convert ramrod error 1004
attempting to dump restore log
writing log file: /mnt1/restore.log -
Error 1321 when trying to uninstall GoLive v8
I am trying to uninstall Go Live CS2 v8.0 from my computer because a lot of the features are not working. This program was received from 1and1.com as a "program package" when our nonprofit foundation purchased the domain and Web hosting from them and received the programs for the shipping/handling charges. I have been unable to get any response from tech support at 1and1.com. Can anyone help me out with this? As the Webmaster for the foundation, I am needing to get this issue resolved quickly and any help will be greatly appreciated.
This is the error message that I am getting when trying to uninstall the program: Error 1321=Installer has insufficient privileges to modify the file C:\programdata\Adobe\updater\certs\golive.cer.
We did register the program and I would have like to of used it for the foundations Website, but I am only able to "build" the site on the program. I am really disappointed in both the program and 1and1.com over this issue.
Thank you,
Michelle HoltThank you for this information. I am more of an applications user than tech. My knowledge of what is on the other side of the applications is very limited. I followed the directions and got the Admin. account activated, but was unsuccessful at uninstalling the program. I finally received an email from tech support at 1and1.com, but it was just an initial email stating that they have received my statement and will be in contact within the next 12-24 hours with a possible resolution. 1and1.com is great for hosting a Website, don't get me wrong there, but the software that they include with their packages are junk. I will continue to use 1and1.com for my Webhosting, but would recommend to anyone else not to get the "program package".
Thank you again for your help. If you think of anything else, let me know. This program is taking up space on my computer that I could use for a program that actually works right. -
When trying to download and update the operating system software for my iPad and iPod I get the following message - "ERROR MESSAGE" There was a problem downloading the software for the iPad "Mikki's iPad". The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again. later." Is this a setting on my computer - my network is working fine. I didn't have any trouble before but have just started having trouble. Please help...
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
Windows 8 user getting error 2343 when trying to uninstall iCloud
I had to uninstall iTunes & all associated files due to a sync issue with a new device. Anyway. I uninstalled iCloud 3.1 with no problems. I then tried to uninstall v3.0.7! I get error 2343.
I have cleared the registry, updated all my windows services, reinstalled iTunes - everything now working great, apart from I can't reinstall iCloud.
Any help would be greatly appreciated.
Thanks>neither in the adobe site.
If you go to the thread list for Reader and choose "Search Forum" and use 1316 as your search parameter, you get tons of hits. -
Error 1316 when trying to uninstall, repair or update Adobe Acrobat Reader
I get error message 1316 when trying to update, repair or delete Adobe Acrobat Reader 8.1 .
The error message is:
Error 2316 A network error occured while attempting to read from C:\Windows\Installer\AcroRead.msi.
Googling seems to find others with similar problems, but no help on the Adobe Knowledge Base.
Can anyone help?>neither in the adobe site.
If you go to the thread list for Reader and choose "Search Forum" and use 1316 as your search parameter, you get tons of hits. -
Error message when trying to uninstall CS3
I had CS3 on my older macBook Pro and used migration assistant to move to a newer MacBook Pro. After this my cs3 hasn't been working. I have the software and I am trying to uninstall CS3 by going to utilities-adobe installers-add or remove Cs3 and I receive an error message that reads system error: required resources are missing.
It's been awhile since I did the migration so It would be a huge pain to go back and do this again, so I'm just trying to reinstall the software.
I have considered just upgrading, but I still feel the need to get this old software off my computer.
Please help!
ThanksI don't know how many times I have posted the following:
You may want to try running this fix from Microsoft and uninstall all traces of any versions of Reader:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
If you want to reinstall Reader, download its full installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
TS3694 What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
What is the cause of "error 1015" when you're trying to restore and update an iphone 3gs? My iphone is currently in recovery mode and can not get out of it. All the information about my iphone shown on itunes is only marked as- N/A. How can I get my iphone out of recovery mode and get it to recover and update?
Thank you,
MacQuestioner3http://support.apple.com/kb/TS3694#error1015, which says:
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words, either your phone is jailbroken and you are sadly out of luck or you are trying to downgrade iOS. -
Error message when trying to extract and install
Why do I keep getting an error message for CS6 beta when I try to extract and install, message file missing?
I assume you downloaded from here: http://labs.adobe.com/technologies/photoshopcs6/
Did you successfully download the file and check file sizes match? Do you extract ok? PC, I assume? What OS are you using?
How far did you get in the installation? Did you select TRY rather than enter serial number? Did you enter your Adobe ID?
By the way, you should change your name to something other than your email as the bots will go nuts when they find that and you may get spam.
Pattie -
Why do I get an error message when trying to Extrude and Bevel my image?
I am making a logo for a friend and he wants something similar to the Stark House symbol. (The Direwolf) but as a dragon instead. I used the pen tool to make the shape, and now I want to fill it in and make it more 3D. I can't fill it in properly and my image gets an error message when I try to Extrude and Bevel. Why is this?
error message,
Is the path/shape closed?
Selecting it and Ctrl/Cmd+J should close it if not, then you may try again.
You may also have a look in the Document Infor palette with Objects ticked in the flyout and the path selected. -
my iphone is coming up error 40 when i try and restoreand i dont know wot to do, plz help
Hello Dov2345
Welcome to Apple Support Communities.
I have some suggestions for your to solve the problem. Please follow the follow article for specific insturctions for the Error 40: http://support.apple.com/kb/TS3694#error40
Hope this helps -
Help!!!!!! I'm about going out of my mind....Need help loading music to my 1st generation I pod and keep getting error 50 message. I have windows xp and loaded new software last night. This all started when I upgraded to itunes 10 awile ago. My computer recognises my ipod and I think its syncing don't know...My library is intact and can't load any music from my library...purchases...or gene ....itunes 10 wiped my custom play list...and now nothing...I used ipod reset utility to restore my ipod to factory settings and still nothing....I don't have alot of computer knowledge and need someone to walk me threw on what to do. I'm at a loss. And about ready to give up on Apple and the I-tunes experiense....I am in dire need. Help!!!!!!!!!!!!
Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
See if this kb helps: http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM. Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.
Maybe you are looking for
-
Data is not showing in R/3 ztable whlie creating XI inbound proxy.
Hi experts, I am creating an XI inbound proxy for zxx_stockyard_price_ib_dt , I created Ztable(this structure contains both filename and data structure) in R/3 and i am writing a code in sproxy to fetch the data from XI to R/3, R/3 is to fill
-
My movies won't play on my ipod
I just downloaded some movies to play on my ipod touch but they won't play on my ipod for some reason. all of them are mp4 files and h.264 (i don't know what this means but seems to be useful when I searched online to see if I could find answers) for
-
Hello, I'm using a trial version of FormsCentral (Acrobat Pro XI) and when trying to define the range of values in a text box with number format option I do not see any, nor to set the number of decimal places (only I see options to set as Mandatory
-
Im looking for photoshop cs5 extended link
I am looking for a link to download photoshop cs5 extended.
-
B-cam for F5: A7S? Or Blackmagic Pocket?
Hi guys, I have a 14-page(!) day coming up for an indie feature, and our budget won't stretch to getting both a second F5 and an operator in. So I'm looking at cheaper options for a B-cam. I'll just have the B-cam on close-up coverage, so that the lo