Error -18001 during installation of built application during installation on different PC

Hi All,
   We are having problems with making an installation package to install our built TestStand/LabVIEW application on the target PC. We get the error shown in the attached image and haven't been able to determine what is correct on the destination PC.
Thanks,
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
TestStand 3.1.1f & LabView Error.PNG ‏15 KB

Well, we have found a fix, figure I'll mention it.
 In TestStand toolbar Configure ..Adapters.. select LabVIEW and click the "Configure..." button then select the version of LabVIEW, in our case the LabVIEW Run-time engine. Only took three of us a few hours to figure it out. Is there a way to perform this setting function in the install?
   Now we are getting the message that "Print VI to Html" property not supported in Run Time Engine (LV7.1) which shoots down part of our program as written. Argh! Any suggestions out there with you TestStand gurus (I am a real newbie in TS)?
Thanks,
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

  • Built application can't find DaqMX devices with VISA Find Resource VI

    My application programmatically finds all of my PXI devices using the VISA Find Resources VI with the following regular expression:
    (PXI[0-9]*::?*INSTR){VI_ATTR_S:LOT >= 0}
    This works with my built application on a PXI-8186 controller with LabVIEW installed, but when I created an installer to put it on another PXI-8186 controller without the LabVIEW development system, none of my DaqMX devices show up in my list of VISA resources.  They all show up in MAX, however.  I even tried creating a simple app that just has the routine which gets the resource list.  Ironically, the only PXI device that shows up in the list is a ZT1000PXI made by ZTEC Corp.  I also have a number of PXI-4437s and PXI-6120s in the chassis.  I tried setting the PXI option in MAX to report all PXI devices, not just registered ones, but that had no effect.
    This is a Windows 2000 OS running on a PXI-8186, with DaqMX 8.5.0f3 and NI_VISA Runtime V4.1, and LabVIEW Runtime V8.2.1.
    Does anyone have a clue why this isn't working? I've tried uninstallng and reinstalling NI-VISA Runtime, but it didn't matter.

    Hi wired,
    As I understand it, you built an application in LabVIEW 8.2.1 on a PXI-8186 controller. When you moved to a new controller, one without LabVIEW 8.2.1, the program to find your PXI cards returns only a third party device and not your DAQ cards, despite the devices being visible in Measurement and Automation Explorer (MAX). You have an Installer for your application that installs the runtime engines for VISA and LabVIEW and the DAQmx driver.  Is my understanding correct?
    You mentioned that you had tried setting the PXI option in MAX to report all PXI devices, not just the registered ones. By this, did you mean that you set the VISA option to Show all devices accessible to VISA? If you did not mean this, then I would suggest doing so. In MAX, you can expand the Software tab in the Configuration Tree to the left. By selecting NI-VISA, the VISA options become visible. You should select show all devices accessible to VISA as seen in the attached screenshot.
    If you did in fact select this option already, can I ask if you also enabled the NI-VISA tulip Passport? In order to do this, on the VISA Options page, under General Settings, if you select the Passports option a list of checked boxes appear. Select the Tulips option as seen in the second screenshot and then click the Save button at the top of the MAX window. You will then need to close LabVIEW or your application and restart it.
    I built a simple program to test this post, and until I followed the above steps, the only devices that appeared were my com ports. After doing this I was able to all of my DAQ cards.
    Could you clarify some things for me? When you said that the application works on a PXI-8186 controller with LabVIEW, was this the development machine or just a controller you tried the executable on and it worked? What is in your installer? Is the VISA version on the test controller the same as that on the development machine? And lastly, in MAX, do the DAQ cards appear under DAQmx devices or under PXI systems and can you communicate with them using a test panel?
    Good Luck, Mallori M.
    Mallori M
    National Instruments
    Global Customer Education Program Mananger
    Calculate the time you will save with NI Training
    Attachments:
    Show VISA Accessible.PNG ‏84 KB
    Tulip Passport.PNG ‏15 KB

  • ORA-20001 GET_BLOCK-ERROR during the installation of an application

    hi people,
    I' ve got the following error during the installation of an application in apex 2.2.
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
    Can anybody help me?
    Message was edited by:
    user512746

    hi,
    db-version is oracle 10g r2
    os windows server 2003
    the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
    Message was edited by:
    user512746
    Message was edited by:
    user512746

  • Error during IDES SAP AFS 6.0 Installation

    Folks,
    I'm installing IDES for the first time and I ran into this issue. The installation starts okay and goes on for a while at the point where it installs the software units it throws an error message:
    An error occurred while processing service SAP ERP 2005 Support Release 2 > SAP Systems > MS SQL Server > Central System > Central System Installation.
    Log Browser:
    ERROR 2011-01-18 10:06:59
    CJS-30156  SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:/PROGRA1/SAPINS1/ERP/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log' for more information.
    ERROR 2011-01-18 10:06:59
    FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .
    In the log file "callSdmViaSapinst.log", I have found the following error:
    11/01/18 10:06:58 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/tcmobileNWM_AWT_700900_MI70SP09..
                         Reason: null; nested exception is:
                              com.sap.engine.services.deploy.container.DeploymentException
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:568)
                              at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
                              at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                              at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                              at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                              at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                              at java.security.AccessController.doPrivileged(Native Method)
                              at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                              at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                         Caused by: com.sap.engine.services.deploy.container.DeploymentException
                              at com.sap.ip.me.core.deployment.core.MobileArchiveContainerImpl.deploy(MobileArchiveContainerImpl.java:172)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
                              at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:553)
                              ... 10 more
                         For detailed information see the log file of the Deploy Service.
    11/01/18 10:06:58 -  ***********************************************************
    Jan 18, 2011 10:06:58... Info: End of log messages of the target system.
    Jan 18, 2011 10:06:58... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Jan 18, 2011 10:06:58... Error: Aborted: development component 'tc/mobile/NWM_AWT_700900_MI70SP09'/'sap.com'/'SAP AG'/'7.0009.20060824164022.0000'/'0', grouped by software component 'NWMCLIENT'/'sap.com'/'SAP AG'/'1000.7.00.9.0.20060827034500''/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/tcmobileNWM_AWT_700900_MI70SP09..
    Reason: null; nested exception is:
         com.sap.engine.services.deploy.container.DeploymentException
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Thanks for your help.

    Guys,
    I fixed the issue, it was the version of Java on my server. I had Java JDK version 1.4.2_29 installed which was causing the problem. I downgraded Java to version 1.4.2_13 and it worked like a charm.
    --Abhi

  • Application Icon are not displayed during Clickonce installation in WPF Application

    During Clickonce installation of WPF application, Icon File(ico) is not displayed in the start Menu and installed applications list in control panel..
    Default icon only gets displayed.
    In my project 
    Already added ico file in the "Icon and Manifest" in Application Properties. 
    Please answer me how to show Application Icon in the Start Menu as well as in installed applications in control panel

    Did you do this:
    http://learnwpf.com/post/2012/07/09/Adding-an-Icon-and-File-Association-to-WPF-Clickonce-Applications.aspx
    You also set the ico file as the project icon.
    Since that's under the Icon and Manifest I guess you did that.
    Also
    The main window ought to have it's icon set to thee icon.
    The main window is the first window you open - which of course may or may not be called MainWindow.
    Hope that helps.
    Recent Technet articles:
    Property List Editing ;  
    Dynamic XAML

  • I cannot complete an installation of ITunes.  During the install, I receive the following error message:   Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    I cannot complete an installation of ITunes.  During the install, I receive the following error message:
    Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • XAI Schema Editor Client, Error 383 during opening of the Application

    Hi,
    I have a problem with the actual XAI Schema Editor Client (V2.2.0.5 and V2.2.0.6).
    During startup of the application, after the logon screen when I've pressed connect, I got the error "Run-time error '383': 'Text' property is read-only".
    It seems that this is a VB error, mentioning that a control is in read only mode or not enabled for writing.
    After this, the application is not responding on a click of a menu entry.
    Every suggestion or help would be appreciated.

    Hi,
    I have a same problem as Markus
    With the actual XAI Schema Editor Client V2.1.0 in MDM 2.0.1
    During startup of the application, after the logon screen when I've pressed connect, I got the error "Run-time error '383': 'Text' property is read-only".
    My process to install XAI Schema Editor is :
    1) Install Oracle Client so that TNS file is created in system .
    2) Provide the service name details in TNS to which I wish to connect my schema editor to .
    3) Start my oracle service using My computer -manage -services .
    4) Create a ODBC data source using Control Panel-Administrator-ODBC .
    5) Test my odbc connection there itself.
    6) Install schema editor and it will show all ODBC data sources in my system .
    7) Provide details as : ODBC Source Name , cisadm(database user) , cisadm(database passwd) , cisadm(database owner)
    Please can you help me, I am very new in XAI
    Thanks
    Naby

  • Supressing autorun during installer creation in Application builder

    I have LV 8.20.
    I am creating an installer for my application including the MAX configuration and DAQmx driver. At some point the Application Builder asks for the driver CD's. When I insert the Drivers CD when the Application builder asks for it, the front panel for installing the drivers pops up and my original popup that asked for that CD disappears. Can I disable the autorun feature somehow? This really interferes with the building process.
    Shouldn't the Application builder programmatically suppress the autorun.inf on that CD?
    Scientia est potentia!

    Thank you for the reply.
    I had managed to create an instastaller afterall. It took me a few tries.
    I had clicked on the OK (or contiue or done?) button on the popup that requested the Device Driver Reference CD before the popup from that CD had a chance to appear.
    It still seems to me that, it would make sense to supress that popup that atomatically comes up when the CD is inserted into the drive.
    Scientia est potentia!

  • Error occurs when i try to install a built application containing Web services VIs

    Hello,
    at the moment i am trying to create and install a built application containing a Web server and Web services VIs. I did the steps as described here: http://www.ni.com/white-paper/7747/en#toc13
    But when I install my application on the target PC the following error occurs after the installation:
    Error2: Failed to perform action
    "[LV2011RTEDIR]LVWS\NILVWSPostInstallerScript.exe"
    "[ProgramFilesFolder]DeployWebServices\Webservice.lvws"
    What did I do wrong? The project example is attached
    Development system: LV2011 SP1, WIn7
    Target PC: Win7, no LabVIEW, but ALL possible additional installer/run-times installed
    Thanks,
    Elmar
    Certified LabVIEW Developer
    www.merecs.de
    Attachments:
    Deploy Web Services.zip ‏20 KB

    Hi,
    long time ago, but I can remember. You have to copy a folder.
    e.g. I have the file in C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2013\LVWS , but there is no LVWS folder in \Shared\LabVIEW Run-Time\2012
    (I have a new computer, and for some reason I'm also missing the file in the LV2012 folder now.)
    Try to copy from another version to 2012 U(or download my fzip). I also don't now, why it is missing. Maybe something during the LV2012 installion was wrong.
    Hope I could help,
    Elmar, CLD
    Certified LabVIEW Developer
    www.merecs.de
    Attachments:
    LVWS.zip ‏688 KB

  • Error while runnning autoconfig on apps tier during upgrade

    Hi,
    Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
    below is the error message.
    Enter the APPS user password :
    The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
    AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
    Using APPL_TOP location : /u01/app/tinst/tinstappl
    Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
    Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
    Context Value Management will now update the Context file
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
    at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
    at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
    at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
    at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
    at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
    Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    ... 8 more
    ERROR: Context Value Management Failed.
    Terminate.
    The logfile for this session is located at:
    /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
    Please let me know your suggestions to resolve this issue.
    Regards,
    Sreenivasulu.

    Hi,
    DB tier autoconfig was successfully completed.
    We have already checked the above mentioned metalink ID's, but still the issue is same.
    Can you please advice any other solutions.
    Regards,
    Sreenivasulu.

  • Repeating error message: "acl found but not expected" during permissions repair

    repeating error message: "acl found but not expected" during permissions repair
    My iMac is running slow. Processor running all the time. I was told to do permissions repair, so I did that. I get 100's and 100's of "ACL found but not expected" while doing a permissions repair in 'utilities'. It says 1 minute to complete but runs for a half hour. When it finally completes, I can restart the permissions repair again and it starts all over with same endless messages. Even though its says 'repaired', these ACL issues keep coming.
    SEE BELOW ... What's wrong? And How do I fix it?
    Kind thanks for your suggestions,
    Vic
    Hardware Overview:  Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.30f1
    Serial Number (system): W884000HZE4  Hardware UUID: BF3B8113-E0F0-54DB-9062-B73A0E4DB0F2
    Repairing permissions for “Vic's iMac”ACL found but not expected on “Library/Printers”Repaired “Library/Printers”ACL found but not expected on “Library/Printers/Icons”Repaired “Library/Printers/Icons”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Repaired “Library/Printers/InstalledPrinters.plist”ACL found but not expected on “private/etc/apache2/extra/httpd-ssl.conf”Repaired “private/etc/apache2/extra/httpd-ssl.conf”ACL found but not expected on “Library/Application Support/Apple/Remote Desktop”Repaired “Library/Application Support/Apple/Remote Desktop”ACL found but not expected on “Library/Application Support/Apple/Remote Desktop/Notify”Repaired “Library/Application Support/Apple/Remote Desktop/Notify”ACL found but not expected on “Library/Preferences/Xsan”Repaired “Library/Preferences/Xsan”ACL found but not expected on “Library/Printers/Canon”Repaired “Library/Printers/Canon”ACL found but not expected on “Library/Printers/Canon/IJScanner”Repaired “Library/Printers/Canon/IJScanner”ACL found but not expected on “Library/Printers/Canon/IJScanner/Frameworks”Repaired “Library/Printers/Canon/IJScanner/Frameworks”ACL found but not expected on “Library/Printers/Canon/IJScanner/Plugins”Repaired “Library/Printers/Canon/IJScanner/Plugins”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources”Repaired “Library/Printers/Canon/IJScanner/Resources”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons”Repaired “Library/Printers/Canon/IJScanner/Resources/CIJIcons”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan5600F.icns”Repa ired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan5600F.icns”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan9000F.icns”Repa ired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan9000F.icns”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE100.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE100.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE110.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE110.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE200.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE200.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE210.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE210.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE700F.icns”R epaired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE700F.icns”A CL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_07.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_07.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_08.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_08.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICADAT.DAT”Repair ed “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICADAT.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808A.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808A.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808W.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808W.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ1908D.TBL”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ1908D.TBL”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602A.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602A.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602W.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602W.DAT”ACL found but not expected on “Library/Printers/PPDs”Repaired “Library/Printers/PPDs”ACL found but not expected on “Library/Printers/PPDs/Contents”Repaired “Library/Printers/PPDs/Contents”ACL found but not expected on “Library/Printers/PPDs/Contents/Resources”Repaired “Library/Printers/PPDs/Contents/Resources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component”Repaired “Library/QuickTime/AppleIntermediateCodec.component”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Info.plist”Repaire d “Library/QuickTime/AppleIntermediateCodec.component/Contents/Info.plist”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/PkgInfo”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/PkgInfo”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/AppleInt ermediateCodec.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/AppleInt ermediateCodec.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature”Rep aired “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature/Cod eResources”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature/Cod eResources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/version.plist”Repa ired “Library/QuickTime/AppleIntermediateCodec.component/Contents/version.plist”

    VicDesotelle wrote:
    repeating error message: "acl found but not expected" during permissions repair
    My iMac is running slow. Processor running all the time. I was told to do permissions repair, so I did that. I get 100's and 100's of "ACL found but not expected" while doing a permissions repair in 'utilities'. It says 1 minute to complete but runs for a half hour. When it finally completes, I can restart the permissions repair again and it starts all over with same endless messages. Even though its says 'repaired', these ACL issues keep coming.
    ACLs are just junk left over from previously installed OSXs. Just ignore. They have no impact.
    Describe your exact issue and computer specs and Linc may run you through a series of tests which may well help you find the problem to your issues. I agree, Permissions repair is rarely required.
    Cheers
    Pete

  • Error when trying to run an application that worked when built with 8.6

    I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6.  Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009.  The error has to do with the Mean.vi.  It claims it cannot find it.  The error I get reads as follows:
    An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'.  LabVIEW load error code 3: Could not load front panel.  I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code.  Please respond as soon as possible as this will quickly start to impact my testing schedule.  Thank You.
    Solved!
    Go to Solution.

    Hi!
    The same problem ???
    I discussed it with my local NI technical support team. The application works without any problems now.
    Basic rule: when creating an installer be sure that option "Run Time Engine xxxx"  in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
    Best regards.
    Attachments:
    ADDINST.png ‏13 KB

  • IPhone freezing when installing or uninstalling application during sync

    hi,
    I've been running to issues with iPhone freezing during install and uninstalling of Applications during iTunes sync. The installation or remove seems to complete after I force reboot iPhone, but sort of troublesome as I'm having to reboot iPhone for every app I try to install or remove. Also, when trying to install or remove application from iPhone's appstore, iPhone gets very unstable and the installation or remove of application never completes.
    Is anyone running into this issue? Any workaround (maybe I need to use Mac instead of windows xp ... ?)

    I think finally figured out the problem...
    This was due to one of the application I had (purchased) installed called "Wisdom dictionary".
    This has been taken off of iTunes already but apparently this application was causing other application to not install. The application is about 120 megs, and the company is currently investigating some memory issue related to expanding the installer. It appears to be Apple issue, they are in contact with Apple, but apparently there is no info from Apple when the issue would be addressed....
    Anyway, without this application, my iPhone so far has been working pretty well.
    It may be possible other large apps may have similar issues.... not sure.

  • Mobile Application Development Installation failed. Error Code: U44M1P7

    After install of DW CS5.5, I tried to update DW CS5.5 and received the following error message, does anyone know how to fix this?
    Mobile Application Development
    Installation failed. Error Code: U44M1P7

    Hi Stillcrazy,
    Welcome to Adobe forums.
    See the solutions in this article http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html and let us know if you still need help.
    Thanks,
    Preran

  • Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

    Hello,
    We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host.  Two guests are running Server 2008 R2 and one is running Windows 7.  I have the backups going to a dedicated external disk drive.
    WSB backs up the two 2008 R2 Hyper-V guests just fine.  However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
    Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
    I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors.  I have plenty of space on the external drive as well.  I've read this article:
    https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
    Anyone have any suggestions?

    Hi,
    As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
    First please refer to this article:
    Backing Up and Restoring Virtual Machines
    http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
    Please check if all following requirements are met. Specifically please check if Integration Service is installed. 
    Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
    Windows 2000:  Backup Integration Service is not supported.
    The child VM must be in the running state.
    The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
    All volumes in the child VM are basic disks and there are no dynamic disks.
    All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for

  • Fillrect to display multiple times on japplet - help!

    I am really having a hard time getting my program to work. The requirement is for a user to input the four requirements or parameters of the drawRect method class and to draw multiple rectangles in different coordinates on the screen. I have my code,

  • ITUNES 9.2 NOT SUPPORTING DRAG AND DROP TO TOAST CORRECTLY

    APPLE is turning into MICROSOFT!!! The new iTunes update to 9.2 may be necessary for iPhone 4 to work but they missed a whole bunch of things. For example when I drag a track from my iTunes window to the desktop I used to see the file on the desktop

  • JCO difference between SAP J2ee 620 and Webas 640 for Internet Sales

    Does anyone have some information on how Internet Sales manages JCO calls to R/3 or CRM on WebAS 640? Till J2EE 620 the sapjco.jar file directory had to be in classpath along with the relevant dlls in WinNt directory. WebAs 640 Java installation does

  • Importing Over and Over

    My church has a Canon Vixia HSF100 camera, and we use it to broadcast and record the services. I have been using it to record some of our discipleship classes as well, so people who miss can catch up on the materials. I've been importing the videos i

  • Discoverer Reporting Solution for Multiple Databases

    I have to build oracle discoverer reports (single point of access) for four different applications. Each application is having separate databases. So whether i should create separate EULs for each applications (in respective databases) or Should i cr