ERROR 1935 PROBLEM

This is a repost from February 27, 2013:
I keep getting an Error 1935 when installing Adobe Reader when it gets to about 96% installed. It also says "An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80073712." I have done everything on the Help page and get the same response. I have reinstalled the .NET Framework, tried turning off the Windows Firewall and antivirus program before installation, run the recommended command at the C: prompt, and tried downloading from the alternative link on the Adobe website. I also ran a registry cleanup utility and still received the same response.
This seems to have been an on-going problem with Adobe Reader for quite some time now, so I hope someone has a fix.

One other thing to try is to install Microsoft Visual C++ 2010 Redistributable Package before installing Reader
http://www.microsoft.com/en-us/download/details.aspx?id=5555
Maybe those actions inside Reader installer will find that assembly already installed and will not try and fail.
Does it make sense?
Even if pre-install of the Redistributable Package fail, maybe you will get better error information

Similar Messages

Problem installing adobe x11 trial Error 1935

after downloading with adobe download assistant it gets about 90% through the installation then encounters a problem and undose everything and the green status bar goes back to the left. what can i do i really need to use this trial by morning. please help thanks

Are you on Windows Vista? I found an old document reagrding this error: http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html. Could you run through the document and see if it helps to install.
I also checked the System Requirements, but I don't see support for Microsoft Vista. It just might work absolutely fine on Vista, but I would still suggest installing on a supported platform.

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?

This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0

Error to install Xcelsius 2008 on Windows vista. Error 1935.

I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
Error 1935 Error al instalar el ensamblado.
"Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

Error 1935 when trying to install Lightroom on windows 7 64 bit.

Having problems installing lightroom it comes up with the following message halfway through install:
Help!

Hi Delbertrum,
You might want to refer the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html

Acrobat XI Pro install errors 1935 &1603

Hi,
I have just upgraded from CS3 and run the Creative Cloud installer app but am having problems with Acrobat (whereas Indesign and Photoshop installed fine) on my workstation that is running Win 7 64-bit.
I have therefore uninstalled all Adobe products, run the Adobe CC Cleaner, checked .Net (currenly 4.5.1) is up to date and restarted but no luck as the attached screen grab where the 'more information' link states:
"Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {C6357C55-7461-3D51-9AE5-FD71CA24027A}. HRESULT: 0x80070422.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {C6357C55-7461-3D51-9AE5-FD71CA24027A}. HRESULT: 0x80070422.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Anyone any suggestions? Thanks v much if so.

Hi Mark ,
Please see the links below mentioned for the Errors.
Error 1603 http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Error 1935 http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Error 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Let me know if it helps.
Thanks!
Eshant

Error 1935 and the VisualC++2005 Redistributable

Hullo,
This is my post from the answers.microsoft.com forum where it has received no replies
Updated: - have contacted Microsoft support four times, of those four chat sessions three have been "Remote Control" sessions.
Problem still exists
Today I copied a file from another computer that I could not find anywhere to download called *vcredist2_x86.exe. After I executed the file from the desktop the error was similar to the one below (in the cut and paste from the other MS support forum)
Today's error window
[Error 1935. An error occurred during the installation of assembly 'policy.9.0.Microsoft.VC90.CRT,version="9.0.30729.6161",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type"win32-policy"'.Please refer
to Help and Support for more information. HRESULT: 0x8007371B.]
When I close this error report the redistributable "rolls back" and I have another window with a link to g0_microsoft.com/fwlink/?LinkId=119537
Can anyone shed some light on these problems (I am only a hobbyist but have invested quite a bit of my personal time trying to solve this?)
Thank you for reading
Nb:-Edit had to break all the links contained (Applies to:=>Windows=>Windows 7=>Programs) at htt#://answers.microsoft.com/en-us
First error window (original error)
Error 1935 An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80CRT ,type="win32-policy" ,version ="8.0.50727.6195",publicKeyToken ="1fc8b3b9a1e18e3b",processorArchitechture ="x86",Please
refer to Help and Support for more information.
Then this second window after pressing okay radio button
The VisualC++2005 Redistributable has failed to install. Please consult Microsoft knowledge base at http://http://support.microsoft.com/kb/556085/ja
This site is a Japanese Microsoft site and it is from 2008 which means it is for Windows XP and Windows Vista machines and Keywords: kbpubmvp kbpubtypecca kbhowto KB556085
The link on the Sony site Frequently Asked Questions (FAQs) the very bottom one, under the heading Troubleshooting. Is it possible that this problem, resembles the "Windows Update error 8000FFFF" , which was for Vista and required a registry Fix-It?
Nb:- Another issue that I had reason to contact Microsoft help desk about today, but alas the other fault I was enjoying (KB 2970228) has not made the program install even though it has been resolved.(smiling)
Thanks for reading

Hi
look here as well, might help you:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/7eafbc81-a024-4767-ae40-8bddd6848c11/windows-7-x64-c-redestributables-error-1935?forum=vssetup
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Server 2008 R2 SP1 - Software install - Error 1935 HRESULT:0x800736B5

I'm working on an error installing a product on Windows Server 2008 R2 SP1 machines. The server has been acting as a file server for months with no problems. The application requires .net 3.5 and .net 4 client profile to be installed. I'm able to pass the
prerequists portion of the installation but eventually the software halts near completion with the error
Error: 1935.An error occurred during the installation of assembly component {106BBB06-46FA-8A99-8361C13A0C}.
HRESULT: 0x800736B5.
I've found a couple articles that reference this article
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e , which I've tried with no success.
The other article I found was
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/error-code-1935-during-installation-on-windows-7/daee32ef-58f0-4d24-a1e0-8bfdab66185f which again I found no success with.
The weird thing about this error is that I cant find anything useful from the event viewer. Does anyone have any thoughts on this?
Thank you in advance!

Hi,
Thanks for posting in the forum.
Before going further, would you please let me know what the product you want to install on the server is? At this time, you could try to disable the anti-virus program first if it is installed
on the server. Then please try to reinstall the two version of .Net Framework and Visual C++ 2005 / 2008 Redistributable Package to see if the issue could be resolved.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

Error 1935. ... HRESULT: 0x80073712 Installation error message. Windows7. Adobe Acrobat Reader 11

Cannot figure out install problem or why it is occuring. The Download and installation runs to about 80% and errors out. Icon even appears for program on desktop around 77% complete and I can open it but aborts setup. I have tried to follow the troubleshooting suggestions by going to
Start > All Programs > Accessories > Run (as adiministrator)
Copy and paste the following text in the Open field and then press Enter
fsutil resource setautoreset true C:\
but to no avail.
Also used Firefox browser but same problem occured.
Only virus protection running is MSE and checked that under internet options security trusted sites that scripting is enabled under custom settings.
Need help! I have seen a few other complaints about this issue but doesn't look like any resolution for those who posted.
Adobe Reader installation errorAdobe Reader installation error
Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80073712. Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80073712.

I have also seen this error a number of times here in the forum, but I do not know what causes it. It seems to be some kind of conflict with the .NET Framework. Could it be that some update to the .NET Framework is running at the same time? (.NET Framework updates perform assemblies that can run for several hours.)
What I would try if I were to encounter this error:
restart Windows
check with the Task Manager's Processes tab that no batch assemblies are running
try the MSI installer http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi
then run the 11.0.3 update http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.03/misc/AdbeRdrUpd11003.msp

Adobe XI Pro Installing Error 1935

I tried to download trial Adobe Acrobat XI Pro but this message keeps appear.
I used Chrome to download the Adobe Download Assistant.
I have Windows 7. Please help me on this problem.

Try Error 1935 | Install | Acrobat, Reader | Windows

Error 1935. An error occurred during the installation of assembly...

I utilizing VS.Net and I'm deploying a project to my client machines. The XP client machines execute the code just fine but I get two general errors when I try to run the app on a Vista Business machine.
1) Crystal Reports Basic Runtime for Visual Studio 2008
Error 1935. An error occurred during the installation of assembly.
'Microsoft.VC90.ATL.version="9.0.21009.1.publicKey="1fc8b9a1e18e3b:.processorArchitecture="x86".type="win32'"
Please refer to Help and Support for more information.
2) The other error happens when I actually run the app and its in InnerException error.
Things that I found on the web discuss adding merge modules to VS but I can't find where to reference that info. Are there any other ideas out there.
Thanks-
JLN

Hello,
Good Day!
I'm having a nasty problem that remains unresolved for the last four weeks now - I'm trying to install CR2008 on a brand new Dell laptop /w 64-bit OS Windows 7 with a T4300 dual core processor (2.1Gz). As far as I can see SP1 or SP2 are not installed. However, I see MS WSE 2.0 SP3 Runtime installed.
During installation of CR 2008 the error message as follows shows up -
Error 1935: An error occured during the installation of assembly component {303994BA-6487-47AE-AF1D-7AF6088EEBDB}
HRESULT: 0X80070002
As a result of this error the installation terminates and the rollback begins (I assume it completely removes the components that it attempted to install so far.
The laptop has the following significant software applications -
Microsoft SQL server 2005, SQL server Native Client, MS VisualBasic 2005 & 2008, C++, MS Visual Studio 2005 Remote Debugger & Windows SDK for Visual Studio 2008 - just in case there are any known conflicts or problems.
Are there any 'leads' I can follow to successfully conclude this installation.
Thanks for your time.
TGupta

Error 1935.An error occurred during the installation of assembly 'Microsoft.VC90.ATL or 'Microsoft.VC80.ATL'

The OS is Windows Server 2008 R2
I can't install any programs (like backup agents) that require these components:
Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) or the
Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
I've tried unregistering the Windows Installer and reregistering it, starting from a clean boot scenario,
This is the error message:
Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please
refer to Help and Support for more information. HRESULT: 0x80070BC9. assembly interface: IAssemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Seems like there are thousands of entries when you google this error but not too many solutions.
The only microsoft support KB entry that deals with this error only is for Windows 7, so the Fix It tool can't be run:
http://support.microsoft.com/kb/970652

Hi All
I have the Same_D_n_Problem.... However, I WAS able to download and install the VC++ 2005 Redist x_64 after removing the one that was there.... Didn't help :(
Tried removing, then installing using a CleanBoot - no luck
REinstalled VC++2005 Redist. No problem but cannot install SQL 2008 R2
Soooo... have traced the SQL Installer log file - and one can get to the entry by searching for 1935 - then looked back for what I think is the begining of the problem - I have marked this with ********************* here is the LogFile excerpt:
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\Services\SSIS Server - OK.
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA - OK.
2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA\CurrentVersion - OK.
2010-12-29 22:08:59 Slp: ------------------------------------------------------------
2010-12-29 22:08:59 Slp: D:\SQLInstal\x64\FixSqlRegistryKey_x86.exe exit code: 0
2010-12-29 22:08:59 Slp: Completed Action: FixSqlRegistryKey, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: PostMsiTimingConfigAction
2010-12-29 22:08:59 Slp: The object state property 'workflow' is null/empty. *********************
2010-12-29 22:08:59 Slp: Error: Action "PostMsiTimingConfigAction" failed during execution.
2010-12-29 22:08:59 Slp: Completed Action: PostMsiTimingConfigAction, returned False
2010-12-29 22:08:59 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: ExecuteCloseWorkflow
2010-12-29 22:08:59 Slp: Workflow to execute: 'CLOSE'
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping Action: ProduceStatusLogs
2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
2010-12-29 22:08:59 Slp: Condition "Is the datastore flag /Scenario/GlobalFlags/AreProductFeaturesSupported set" did not pass as it returned false and true was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: FinalizeProgressStatus
2010-12-29 22:08:59 Slp: Completed Action: FinalizeProgressStatus, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: RebootMessageAction
2010-12-29 22:08:59 Slp: Completed Action: RebootMessageAction, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping Action: FinishPage
2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Skipping property RequireMode of class: StopAction
2010-12-29 22:08:59 Slp: Input of property will not be set due to the following failed restriction(s):
2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to ComponentUpdate" did not pass as it returned true and false was expected.
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: CloseUI
2010-12-29 22:08:59 Slp: Stop Action
2010-12-29 22:08:59 Slp: Completed Action: CloseUI, returned True
2010-12-29 22:08:59 Slp: Completed Action: ExecuteCloseWorkflow, returned True
2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
2010-12-29 22:08:59 Slp: Running Action: PassPidBackFromComponentUpdate
2010-12-29 22:08:59 Slp: Pass the flag CuPidDisplayed to the main setup
2010-12-29 22:08:59 Slp: ENU value specified, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: PID value specified, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: SQMREPORTING value is specified in CU workflow, trying to pass the value to main setup
2010-12-29 22:08:59 Slp: Completed Action: PassPidBackFromComponentUpdate, returned True
2010-12-29 22:08:59 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:08:59 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2010-12-29 22:08:59 Slp: Sco: Attempting to get registry value CustomerFeedback
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp: ----------------------------------------------------------------------
2010-12-29 22:09:00 Slp:
2010-12-29 22:09:00 Slp: Error result: -2068052081
2010-12-29 22:09:00 Slp: Result facility code: 1212
2010-12-29 22:09:00 Slp: Result error code: 1935
2010-12-29 22:09:00 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey
2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2010-12-29 22:09:00 Slp: Sco: Attempting to get registry value DW0201
2010-12-29 22:09:22 Slp: Submitted 1 of 1 failures to the Watson data repository
2010-12-29 22:09:22 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2010-12-29 22:09:22 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2010-12-29 22:09:22 Slp: Sco: Attempting to get registry value CustomerFeedback
Would be great to hear others' thoughts on this
Cheers
Martin

Error 1935: Microsoft Visual C++ 2008 Redistributable Install

I was trying to install Visual Studio 2010 and started encountering errors with the C++ distributable package during install, so I decided to install it by itself. Whenever I try and install it, it stops on
Feature: FT_VC_Redist_openMP_x86 Enter text and I receive the following error message before it rolls the install back:
Error 1935. An error occurred during the installation of assembly 'policy.9.0.Microsoft.VC90.MFC,version="9.0.30729.1",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32-policy". Please
refer to Help and Support for more information. HRESULT: 0x8007371B.
I am running it in Admin mode and have tried disabling the services and restarting my machine. I am running Windows 7 Ultimate 64-bit. This problem is preventing me from installing numerous software titles that require this to be in place. Any help would
be greatly appreciated. Thank you!

Copy the file "C:\Windows\Logs\CBS\CBS.log" to your document folder (otherwise you can't open it) and open it with notepad. Now search for errors. Which errors do you see? If you're unsure about the entries, upload the complete CBS.log to your public
SkyDrive folder and post a link here.
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
I have the same problem as ndfan1993, so I did as described above.
I'm unable to run most types of software such as games. When I try to launch the game "Total War: Shogun 2" for example the computer fails to install Microsft visual c++ so the game doesn't start.
In that log the following message is repeated many times:
CBS    Failed to get CSI store. [HRESULT = 0x80070246 - ERROR_ILLEGAL_CHARACTER]
2011-10-13 16:17:36, Error                 CBS    Failed to initialize store parameters with boot drive: and windows directory: [HRESULT = 0x80070246
- ERROR_ILLEGAL_CHARACTER]
2011-10-13 16:17:36, Info                  CSI
000001ce@2011/10/13:14:17:36.416 PopulateComponentFamiliesKey - Begin
2011-10-13 16:17:37, Error                 CSI
000001cf@2011/10/13:14:17:37.804 (F) d:\w7rtm\base\lstring\lblob.cpp(2221): Error STATUS_ILLEGAL_CHARACTER originated in function RtlTranscodeLBlobs expression: __rv.UcsCharacter != (0xffffffff)
Does anyone know what it means?
Or does anyone have a suggestion as how to solve the problem?
Any help is greatly appreciated.

Error 1935 Upgrading from BO XI 2.0 to BO XI 3.1

Hello,
I'm new with the Business Objects environment, just had the Administration and Security training.
I was given the mandate to upgrade our BO XI 2.0 to BO XI 3.1
BO test server runs on Windows 2003 SP2
When upgrading the server with version 3.1, I'm receiving the following error message:
Error 1935. An error occurred during the installation of assembly component {5617BF49-9195-4C35-B9AD-F8D165DE25BB}. HRESULT: 0x800700B7. assembly interface: IAssemblyCacheItem, function: Commit assembly name: Microsoft.MSXML2R...
Note: Prior to installation, I have disabled the antivirus software.
Any idea what could possibly the problem?
Thanks
Jay

Ronald,
I finally went with a brand new fresh install on a different server. Also decided to go with a Windows 2003 64 bits version. Some surprises but now working.

ERROR 1935 PROBLEM

Similar Messages

Maybe you are looking for