Error -200141 when doing buffered events with DAQmx and PCI-6602

When doing buffered events with DAQmx and PCI-6602 I get error 200141 - Data was overwritten before it could be read by the system.
This error is generated ONLY with random inputs >200/sec.
My setup is :
DAQmxCreateCIVCountEdges(taskhandle,"Dev1/ctr3"....
DAQmxCG+FGSampClkTiming(taskhandle,"/Dev1/FPI35",...
DAQmxSetCICountEgdesChan(taskhandlem,"", "/Dev1/80MHZTimeBase")
DAQmxSetChanAttribute(taskhandlw,",",DAQmx_CI_DataXferMech,DAQmx_Val_DMA,0);
Can somebody help ?

i'm getting the same Error-200141, while reading semiperiods. (Meas_Buffered semiperiod continous)
while loop ex.rate seems to be pulsewidth*no.Samples to read. in my case PW=60ms
Input buffer size measured with Property node= 10000
why this error happens?? i cant use any mode other than implicit timing for semi-period measurement right??
more info: all the ai channels are used ~ 16 differencial.
i found one solution which is _ reinitializing the whole task if an error occur. is this the right way??
Kudos always welcome for helpful posts
Attachments:
Counter_1_Meas Buffered Semi-Period-Continuous_main_lv09.vi ‏34 KB
SemiPeriod_Reconnect Counter on Error.vi ‏35 KB

Similar Messages

  • -10920 error when executing buffered period measurements on a PCI 6602 timer.

    I frequently encounter the -10920 NI-DAQ error when I run the C code for single buffered data period measurement .
    The error message is "One or more data points may have been lost during buffered period measurements due to speed limitations of the system". I am unable to resolve this error. I have a Win2K environment and am using VC++ to compile and execute the code. Please help.

    When doing buffered period measurements, the rate at which you can transfer data from the counter is system dependant. To try to get around this there are two things you can try. The first is to set the 'number of counts to read at a time' to a greater number. This way, the 6602 board will use less calls across the PCI bus. If possible, try to limit the number of pulses coming in on the gate that you are using to latch the counts, though in many applications this is not possible.
    Make sure that you minimize the PCI bus activity on your computer. This includes, video activity and any network activity along with anything else that is connected to the PCI bus.
    Brian

  • Error 10800 when doing Analogue Output with DAQPad-6070E

    I'm trying to test out the Analogue Output from my DAQPad 6070E (Firewire). I'm using the Example vi 'Generate N Updates', but get an error:
    Error 1080 occured at AO Control
    possible reasons: NI-DAQ LV: The opereation could not complete within the time limit.
    This example seems to work fine on a PCI E-series card, But the example claims it should also work fine on the DAQPad 6070E.
    It seems to sometimes work ok the first time I try after power cycling the DAQPad.
    I've tried updating to the latest version of NI-DAQ, with LabView 7.0, Windows 2000.
    If i used the test button from withing MAX, then the DAQPad seem to work fine with continuous output of a sine wave.
    Any help much appreciated.
    Ke
    ven.

    This is certainly not a solution, especially if you need a lower output rate/buffer.
    I've got the same problem with my DAQPAD 6052E. I traced it down to AO START vi. It appears when the output buffer is less than 1000 and the number of output buffer iterations is set to 1. The error does not appear when in the continuous output mode (number of buffer iterations is "0").  I talked to tech support, and they know about the problem, but they do not offer any solutions, except for using a larger buffer. Simply speaking, it is a bug in the driver, which they haven't fixed yet. Way to go, NI.

  • What will I see when doing site survey with WRT and WRE?

    I have just successfully setup with security, my WRE54G to my WRT54GS.  It wasnt easy, lots of resets and disabling of security, but I didnt have to set a statis IP (which I am happy about)
    However, now that I am searching for a connection on my laptop (wirelessly) I see to available networks but both are with the same name (the name of my original wireless network).
    Is this right?  If so, this gets confusing as I am not sure which I am connecting too.
    Then if I change from one to another, I have to enter in the passphrase, which gets annoying.
    Is there anyway to have a differnent name of my Wireless network vs the Wireless Expander?

    The RE, as I understand it, just extends the router signal that it is connected to. That is why it is imperative that the setup be EXACTLY the same. In my case, I stupidly put some capital letters in my SSID but didn't put them in when I setup the RE. Took me the longest time to figure that out....That you see two "networks" on site survey is OK. That you can connect to them differently is weird and that you have to enter the security passphrase suggests that you really haven't been successful in setup. So, Dibbler's advice is correct. Make sure the router and RE settings are the same and the firmware is upgraded.
    I can't tell what device I am connected to and I really don't care. I just know that the place I was connecting from prior to the RE was far from the router and I would get the "limited connection" warning and no internet. With the RE and closer to my laptop, I always get "excellent" signal and an internet connection. I assume I'm connecting to the RE but it is seamless.
    Also, make sure you the supply the MAC address of the router if the RE is v.1. Got that from the full user guide at the Linksys WRE54g product page.
    If you really want different SSIDs I think you need to get a bridged access point.
    Message Edited by Luckydog on 06-20-2007 06:11 AM
    Message Edited by Luckydog on 06-20-2007 06:15 AM

  • F-04: give error message when clearing AP items with payment block key(R)

    Hi all,
    Customer wants to prevent payment for AP items with payment block key(BSEG-ZLSPR) .
    I want system giving error message when doing payment clearning with t-code:F-04.
    How can I realize it ?
    Thanks Grus!
    Lynn

    Please configure the following nodes properly:
    Financial Accounting>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons & Define Default Values for Payment Block
    For the error message: You may define a validation in OB28 with the help of ABAP consultant

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

    How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

    I hate "J term"
    OK I love the learning the students get.   And, I like helping them out!  But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
    Instructors invited to engage in the forums
    Jeff

  • Getting error 789 when trying to connect with a PC remotely via VPN

    When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

    The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
    If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

  • I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

    I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars.  I downloaded it for the first time a month ago and  had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error.  What do I do now?  Can anyone help with this?

    Hello easbda,
    Thank you for providing the details of the calendar issue you are experiencing with your iPhone.  I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error : Profit Center does not match with Business Area. Message no. ZGLTFI

    Hi Everyone,
    Error occurs when doing inbound PGR. Processed done so far are the following:
    Normal PO created & released.
    Inbound created
    Transfer order created and confirmed.
    When doing PGR via VL32N > click Post Goods Receipt error occurs
    Profit Center does not match with Business Area
    Message no. ZGLTFI0001031
    Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
    The same Profit Center was maintained in material master.
    The Plant used was assigned to proper division and business area.
    Any other ways to check?
    Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
    Tried to do other transaction involing the material, plant and profit center all give the same error.
    Any info shared is much appreciated.
    Thank you.

    this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit.  Please find the user exit, or talk to FI Team and ask what they check

  • My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
    Close all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPhone 5 error 4005 when trying to update with itunes

    iPhone 5 error 4005 when trying to update with itunes

    Hello mjy75, 
    Thank yoj for using Apple Support Communities. 
    The following article covers error 4005 when updating your iPhone.
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    Regards,
    Jeff D. 

  • HT1386 I keep getting error [54] when i try syncing with i tunes, what do i do?

    I keep getting error 54 when i try syncing with itunes. what do i do?

    Maybe here:
    http://att.macrumors.com/showthread.php?t=1362080
    Also try Googling for: itunes error 54

  • I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!?

    I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!

    anyone????

Maybe you are looking for