Error-200279 when reading Analog Wfm Nsample
I'm calling the attached VI at least 10x in the main VI and works fine but sometimes it's giving me an error-200279. Can someone please tell me why?
Thank you in advance.
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...
Solved!
Go to Solution.
Attachments:
Detect Frequency.vi 25 KB
Your buffer isn't big enough.
You are collecting 20,000 samples per second, but only set it for 2000 samples per channel. So that is 1/10 second worth of data. You are reading 1000 samples at a time, so about 1/20th second. If the loop is running fast enough, you can keep up and won't get an error.
If there is a small delay (perhaps Windows goes off and does something else for 50 or 100 msec.) your buffer will overflow.
I'd suggest eliminating the 2000 constant where you set the samples/channel and try again. See if it behaves better.
Similar Messages
-
Error 200279, when trying to save waveform
Dear Sir,
When trying to save voltage waveform(by clicking record button, to save into ASCII file),
the waveform is distorted and soon it comes "error 200279" with the following message:
==================================================================
Possible reason(s):
Measurements: Attempted to read samples that are no longer available. The requested sample was previously available, but has since been overwritten.
Increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem.
Property: RelativeTo
Corresponding Value: Current Read Position
Property: Offset
Corresponding Value:
Task Name: _unnamedTask<105>
==================================================================
Is it because of memory in PC? or do I have to adjust sampling rate?
Please give me some tips to resolve this problem. Thank you.Hi Sbomy,
There error you are receiving is a buffer overflow error and can be easily corrected by decreasing the sampling rate or increasing the buffer size and the samples to read. Here is some information about it:
http://digital.ni.com/public.nsf/allkb/BB4E0A58688EB812862562C2004DF9A5?OpenDocument
Let me know if you have any other questions.
Sappster -
Hi guys,
I am a beginner in Labview and have been dealing with this problem for a couple of weeks now and just can't seem to get it completely right, I have a feeling there are a few small bugs in my code/hardware setup.
I am running an scxi-1000 chassis with a 1600 module and 1302C along with a 1303 accesory for temperature measurements, this is connected to four thermoucouples. Unfortunately I have a limited number of modules available so I am also using a PCI-6221 DAQ card with an scb-68 breakout box used for a digital output and analog input voltage channel. Attached is my labview program. When I run the code at a 50 Hz sampling rate it runs with no errors but the data file comes out extremely wrong, this is also attached. When I run the code at 100 Hz I get error-200279 after a few loops. I used to have 2 daqmx timing VIs (one for each input), but the same error would eventually happen, I have also tried increasing the buffer size on said timing VI. I am also using an old computer (Pentium IV) could this effect the program?
I have learned a lot going through forms for similar problems to mine but I just can't get it to for an extended period of time, I have posted my simplest code.
Thanks in advance,
Luca
Attachments:
tc_2.txt 1102 KB
FinalCombined_2.vi 128 KBOk this makes sense. I have made the suggested modifications but still getting the same error with sampling rates of 100 Hz or higher. Could you check that I have implemented the queue VIs properly (new file attached)? Also when running at 50 Hz in debug mode it does not look like the second while loop (with the dequeue element) comes into play until I hit the stop button, once I hit the stop button I get the following error:
Error 1 occurred at Dequeue Element in FinalCombined_2.vi
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
This leads me to believe I have programmed the queue elements incorrectly.
Thanks for your help, any suggestions are greatly appreciated.
Luca
Attachments:
FinalCombined_2.vi 102 KB -
Error message when reading PDF files
I'm running FFox 5.0 and have the Adobe Acrobat plug-in (V10.1.0.534). My system in WinXP/SP3. I recently updated my Adobe Reader to Version X and ever since then I encounter an error when trying to read a pdf document on a web site. The document comes up, but in a bit of a strange way. First I get an "(JavaScript Application)" error box showing the message "Load: TypeError: browser is unidentified." Then when I touch the OK button the document is displayed, but with a double window header, the upper one showing "Mozilla Firefox" and the lower one the orange-shaded "Firefox v". As I said, the document is displayed OK, but something isn't normal. Is it the fault of the updated Adobe Reader, or FFox V5, or what?
Does it work the first time after you delete your Normal.dotm file? You may be running into the same issue that is detailed in this post Unable to open document. Please check to see if you have read permission for the above file.
-
Visa error -1073807339 when reading or writing to com 2
Good morning,
I am using both com 1 and com 2 to communicate with instruments using Labview 7.1 and Windows XP. Com 1 which works without any problems is communicating with a HP 34970A and com 2 which sporatically works is communicating with a Valhalla 2430 power analyzer. When I get the error, I open MAX and com 2 has an explanation point indicating a problem.
Thanks for your help.
EverettHello again and thank you for all the responses. Valhalla charges money for their driver so I doubt they would want it posted in the discussion forum. I ran NI-Spy and will attach the logs. I also changed the byte count from 32 to various lower numbers but 21 seems so far to operate without an error running the Valhalla VI only. This afternoon I will try it again in the program to see if an error occurs or if I don't get my data sometimes. Capture 1 was done using max and open visa for com 2. I ran it several times. Capture 3-1 is after I changed the byte count to 21 and added some delay on the VISA read.
For some reason it won't let me post a .spy extension
The file does not have a valid extension for an attachment. jpg,gif,txt,xls,vi,zip,doc,bmp,llb,pdf,png,seq,c,h,cpp,cs,vb,ini,gz,ctl,scr,ico,tar,z,uir are the valid extensions
Everett -
Error -36 when reading/writing with firewire drives (400 & 800)
This is only happening when I connect the drives to my G5, but the drives work fine on my MacBook Pro. I first thought I had a problem with my drives, but then when they worked on my laptop I figured it must be a problem with my G5. One of the drives is a smartdisk firelite drive connected via firewire to the front of my G5, the other is a G-Drive connected via FW 800 in the back of my machine.
Any ideas of what I need to do on my G5 to fix this issue?
Thanks!Hi-
The error is an I/O error. One possible cause is low power on the firewire bus, or, the drives require more power than is available. Placing a powered hub between the G5 and the drive may be the solution. -
Hello guys,
below are snippets of my code and when its goes into the select statement, i get this error TSV_TNEW_BLOCKS_NO_ROLL_MEMORY. Do you have any idea what went wrong? here are the table declaration and select statement.
BEGIN OF ty_instfact,
ucinstalla TYPE
/bi0/oiucinstalla,
ucoperand TYPE
/bi0/oiucoperand,
ucop_str1 TYPE /bi0/oiucop_str1,
END OF ty_instfact
DATA : i_instfact TYPE STANDARD TABLE OF ty_instfact.
SELECT ucinstalla ucoperand ucop_str1
FROM /bic/azinf_d0100
INTO TABLE i_instfact
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE ucinstalla EQ RESULT_PACKAGE-ucinstalla
AND ucinstalla > 0
AND ucoperand = 'E-NSRD'
OR ucoperand = 'G-NSRD'.Hello All,
SAP came back to me regarding this issue. There are only way to eliminate this error is to:
- use InfoSet rather than JOIN
- increase Extended Memory or Heap Memory for Background WP.
We have doubled the memory per process (4-->8GB) and it works fine now.
Kind regards,
Roman -
Éden
What are you using to save as a pdf? Reader doesn't have anything to do with creating the pdf. If you are simply using the "Save As>PDF in Word then yes, it's a Microsoft issue. No Adobe product is involved in that part. Adobe Reader is only seeing what is created.
But, when you say it's being cut off do you mean it's cutting it off in the pdf itself or is it all visible in the pdf but is being cut off when you print? -
Hello,
I am monitoring a machine condition using a triaxial accelerometer and optical tachometer for speed. I have 8 pulses each revolution.
Please find attached my screen shot for the error and the VI. It runs few seconds and stops.
Please try to find what am I doing wrong?
Many thanks in advance for your help and support.
Attachments:
screen shot error tachometer.png 18 KB
Tachometer7-2-3013-2.vi 110 KBHello Bibb,
You are receiving this error because you are not crossing the reference levels often enough. The reference levels, described in the help files here, help determine one cycle. If your reference levels are too high and your signal is not crossing them, it will not be able to determine the measurement interval of one complete cycle. Also, if your frequency is too low, it will not cross often enough as well.
Maggie
National Instruments
Applications Engineer
ni.com/support -
Error when reading data from socket
Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit -
Error when reading data from XML using JAXB?
Hi all,
I get the error message when reading data from XML using JAXB.
[org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
(AbstractUnmarshallerImpl.java:315)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
I don't find the reason, please help!
Thanks in advance!The problem is sovled.
-
Error when reading back a binary file
Hello,
I am writing out a binary file consisting of U32 arrays, packed strings, and clusters. I get error 116 when reading back. As long as I am synchronized on the correct data position why should LV care what I write to the file? In the example I write a simple 16 element array and a time stamp cluster. When reading back the array I get the error. What is the correct way to do mixed structures? Thanks.
Attachments:
file write.PNG 44 KBDavid,
You can solve the problem in various ways. The easiest might be to modify the writer VI by wiring a True constant into the "header (F)" input of your first Write File node. That forces LabVIEW to include a four-byte header that specifies the length of the array you are writing.
When you wire up the reader code the way you did, the length of the array you wire to the "byte stream type " input is irrelevant; by wiring nothing into the "count" input, you are implicitly telling LabVIEW to look for a header to determine the length of the array you are asking it to read. Because you didn't write any header, LabVIEW is interpreting the first four bytes of the array itself as a length. That length doesn't match the actual amount of data present in the datafile, so LabVIEW generates your error.
An alternative solution would be to leave the writer unchanged and modify the reader VI: wire an I32 constant into "byte stream type" and wire a 16 into "count". The choice depends on what you prefer and whether or not these binary files need to be compatible with some other program or not.
Another aside: you can dispense with your case that checks whether the datafile already exists. Just change the function input of the Open/Create/Replace to "create or replace" and wire a False constant into its "advisory dialog" input.
Hope that's clear,
John -
Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.
There are dozens of threads in this forum that describe the fix
-
Error message when installing, modifying or repairing Adobe Reader
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: <Keyname>. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value <Valuename> to key <Keyname>.
Verify that you have sufficient access to that key or contact you support personnel.
Please see: Error message when installing, modifying or repairing Adobe ReaderThank You phoney01.. this did indeed work perfectly for me as well!
-
When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device
Hi Centreless,
If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
I messed with basically everything in the Display Settings and Phone Settings, trying to get it back to the same display I had on my old phone. But now it won't do anything? I literally just bought it and activated it within the last 30 minutes. If s
-
How do you limit the content of Launch pad screens
How do you limit the content of Launch pad screens - mine is cluttered with many applications - which are all valid - but many are so raely used they are causing me to have two screes - I want one screen possibly half filled. Can anybody help...
-
Downloaded iTunes 11 today and now my iphone 3Gs is not recognized. What do I do next?
I have tried to reinstall iTunes a few times to fix the Apple Mobile Device but phone still not recognized. Any suggestions?
-
I open a CAF file in Quicktime Pro and I wanted to export it as an MP3. I didn't see an export to MP3 option, so I exported the file to a WAV file then converted that to MP3. Any ideas how I can export directly to MP3? I may have missed when I was lo
-
OVM 3.0.3 - cannot add new server to VLAN group with bonded VLANs
I have a new OVS 3.0.3 server built with 2 bonded interfaces and a single VLAN running on top for the management interface. It gets discovered fine by OVM Manager (I'm running Version: 3.0.3.126, Build: 20111214_126) I am trying to add it to a VLAN g