Error 252 when receiving fax

Can't receive faxes. Get error 252. Googled that and it says 252 means "poor telephone line condition"- any remedies out there from anyone?

Hi paxel ... I'm not sure about the error your fax machine is giving you, but there is an easy way to test the phone line. If you have a standard corded telephone, take it and plug it into the jack for the fax line. Simply pick up the phone and make some test calls from it and to it. If the line comes up sounding normal and clear, the issue may be with the fax machine. If the line comes up with abnormal sounds, you may have a line issue.
Another area to test would be the phone cord between the fax machine and the wall jack. These sometimes go bad and need to be replaced. This would be an easy item to switch and test first.
Let us know what happens and if you need further assistance. If the line tests as bad, you can always private message me so I can assist you from there.
Thanks.
Karl
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

RFC_ERROR_SYSTEM_FAILURE: An error occurred when receiving a complex parame

Hello Friends,
I am facing an error while tranferring data from XI to BI System.
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM' (internal name 'RfcClient[POSDMLog_Receiver]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=200, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=sandeep, jco.client.sysnr=01, jco.client.ashost=10.1.45.35}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=200, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=sandeep, jco.client.sysnr=01, jco.client.ashost=10.1.45.35}
Current pool size: 1, maximum pool size : 1
Channel History
- Error: 2010-04-19 17:50:52 GMT+05:30: Message processed for interface /POSDW/CREATE_TRANSACTIONS_EXT: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling /POSDW/CREATE_TRANSACTIONS_EXT in remote system (RfcClient[POSDMLog_Receiver]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An error occurred when receiving a complex parameter.
- Error: 2010-04-19 17:50:10 GMT+05:30: Message processed for interface /POSDW/CREATE_TRANSACTIONS_EXT: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling /POSDW/CREATE_TRANSACTIONS_EXT in remote system (RfcClient[POSDMLog_Receiver]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An error occurred when receiving a complex parameter.
Can you please suggest me for the same.
Regards,
Narendra

Hi,
Use transaction ST22 in R3 (where you have created the RFC) and see what error has occoured. This will help you to solve your problem.
Since you got RFC_ERROR_SYSTEM_FAILURE exception, therefore have a look at the dev_jrfc.trc files. These files are written by JRFC and can be found in the directories j2ee/cluster/server* of the J2EE Application Server Installation.
Regards,
Sarvesh

Error message when receive a fillable form back from patient

Hello:
The image below is an error message we received when the patient emails us back the survey form we have emailed to them.
How do we fix so we can gather the data that was sent to us?

Could you please confirm if you are receiving .FDF file as an email attachment.
If this is the case then the above message is expected.
FDF file just contains the response data and it requires original PDF where it can merge the data to show the final output.
Steps to avoid this workflow:
1. Use the complete PDF format on submit button.
2. If you have the original PDF then save the FDF file separately and merge the data using following option:
     a. Open the original PDF in Acrobat.
     b. Go to Tools -> Form -> More Form Options -> Import Data
          and then locate the FDF file on your machine.

Error RCV_TP_INVALID_DEST_TYPE when Receiving Transaction processor is run

Hi,
I am encountering error RCV_TP_INVALID_DEST_TYPE, when I try to run Receiving Transaction processor.
What does this error indicate?
Thanks
Manpreet

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

Using black ink cartrige only when receiving faxes

I have an HP 6600 Deskjet printer in my office. it is used primarily as fax machine. I go through quite a few color cartridges. Have found this puzzling since faxes are black and white. Was told by rep a Office Depot that is was because all color cartridges are being used to make the black ink for faxes.
Is there any way to set fax option to use black ink cartridge only? Thank you.

Hello!
Welcome to the forums @carperwm
I understand you are looking to see if you can use black ink only when printing out faxes, with your Officejet 6600.
Unfortunately you cannot, as the ink system will continue to work all together to print out the faxes.
However, you can choose to print in black ink only from your computer, check out these guides for help on changing the settings:
Changing Print Settings in Mac OS X
Changing Print Settings in Windows 7
I hope the information helps, have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 7612 not receiving faxes

We've had an HP 7612 for months now and all of a sudden it's not accepting faxes. Rings once, makes a tone and shuts off.
Checked the settings and did a fax test and all looked good. What could be the cause?

Hey @tamwolfe,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the fax receiving issues you're experiencing with your HP Officejet 7612 Wide Format e-All-in-One. I understand that you have already checked settings to no avail. Thank you for also including that the fax test completes with no issues. At this time I'm going to walk you through some additional troubleshooting to resolve this issue.
Just so you are aware, faxing is old analog technology. However, nowadays Phone Companies use digital lines rather than analog. Digital lines should work just fine. However, there is a lot more static noise and interference on those lines that can cause intermittent issues when receiving faxes. Usually the digital interference doesn't affect sending faxes. If this machine was working for a period of time and suddenly stopped than there is a chance that the Phone Company updated something on their end that has caused additional interference. Our ultimate goal here is to suppress as much of that static noise interference as possible to allow for reliable faxing.
Step 1: Disable ECM:
Error Correction Mode is a setting that is turned ON by default on your printer. This setting will cause your machine to stop receiving faxes should interference be detected. I am going to have you disable this feature to force faxes to receive.
On the touchscreen for your printer right arrow until you see the Setup menu (wrench)
Touch Setup to access this menu
Select Fax Setup to access the Fax Setup menu
Right arrow to Advanced Fax Setup and select it
Right arrow to Error Correction Mode (ECM) and select it
Disable Error Correction Mode
Have someone fax you now to ensure that receiving is working again. Should you still be experiencing issues please continue to the next step.
Step 2: Lower Fax Speed:
As I previously mentioned, digital fax lines can cause a lot of interference for fax machines. With digital phone lines the technology is much more advanced than on analog lines. The transmission speeds on those lines can also cause packets of information to be lost, resulting in a fax communication error when receiving. To correct this issue I am going to have you lower your fax speed.
On the touchscreen for your printer right arrow until you see the Setup menu (wrench)
Touch Setup to access this menu
Select Fax Setup to access the Fax Setup menu
Right arrow to Advanced Fax Setup and select it
Right arrow to Fax Speed and select it
Change the Fax Speed to Slow
Please try receiving a fax again on your machine to ensure that the interference issue is resolved.
Note: If you are using a DSL Phone Line you will need to have a DSL filter on your fax cable to cut down interference. Also, avoid splitters or phone cable extenders as they can contribute to the interference issue.
Please let me know if the steps I've provided resolve your fax issue. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Error message when trying to scan to email or fax

when I try to scan to email or fax i get this message:
"secure connection to SMTP server could not be established..."
I didn't have this problem when I first got the laserjet pro 200 m276.
any thoughts on how to remedy>

Hi MACSRC1,
I see by your post that you are getting the error "secure connection to SMTP server could not be established" when trying to scan to email or fax. I can help you with this.
I have provided a document to check your scan settings. You might have to run the wizard again.
How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
Click on Scan to email.
This document is for Cannot Send or Receive Faxes to go through to resolve the fax issue.
What email provider and email program are you using?
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

I receive an error message when trying to install Adobe Acrobat 6.0 on my new PC that has windows 8.1

I receive an error message when trying to install Adobe Acrobat 6.0 on my new PC that has windows 8.1.
Can someone help me?
thanks!

And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium

Receiving error message when trying to backup computer in Windows Vista Ultimate

I am receiving an error message when trying to back up files from backup and restore in Vista Ultimate it says Access is denied (0x80070005). This problem began occurring recently after a bunch of unwanted programs were inadvertently downloaded from the
internet. I uninstalled all of them using REVo uninstaller but some of the files were not removed in the process. Can someone out there help me resolve this problem with the error message I am experiencing? THX
DAG

Karlluch...
Try here > iTunes for Windows: "Error 7" message when opening iTunes

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Error 252 when receiving fax

Similar Messages

Maybe you are looking for