Error 32812: specified tag name not found

Hello,
I've just started using LabView 7.1 (under Windows) with a Compact Fieldpoint and developed a small data acq. test program. I've built an install and installed the program on another PC. I've also installed MAX onto the target PC and loaded up the Fieldpoint iak file into MAX. Everything worked fine the first time I did this and my program communicated with the Fieldpoint. Now, I've just installed a new version of my program and I'm getting an error 32812 specified tag name not found when I use the FP Read.vi.
Any ideas what is wrong? I presume that my iak file has the wrong tags in it? But it's the same one saved from my development PC! I did notice a slight difference in the versions of MAX, my development PC has
3.1.1.3003 and the target PC has 3.1.0.3021. If this is the problem where do I find an updated install for MAX
Many thanks
Mike

Hello Mike-g
This is a common error. Checkout the following Knowledge base for more information on how to deal with it:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument.
Hope it helps...

Similar Messages

Error 32812 (Specified Tag Name not Defined) from FP Read

I built an application using LabVIEW 7.1 and FieldPoint 4.1. It
performed well until about a week ago. Suddenly, I started getting
error 32812 (Specified Tag Name Not Defined) when doing an FP Read to
read all the channels on an FP-RLY-420. This is installed at a
client's site, but my client assures me that nothing changed in the
computer configuration. There is a dual serial card installed (SIIG
Cyberserial DualPCI dual 16550
RS232 Serial I/O Card), which does seem to cause problems (mouse jumps
erratically), and I wonder if this card could be contributing to the
problem, but I'm not sure why I would get the specific error message
I'm getting.
In looking for info on the problem, I did find an article on
registering the MIS files, but I have tried selecting "Find Devices"
through MAX while logged on as an admin, and the error still occurs.
If anyone has any ideas as to what could be causing the problem, it would be greatly appreciated.
Thank you,
Jason

Hello Jason,
I think that the error you are seeing could be caused by either 1) a
mismatch between the tag names saved on your computer and the actual
channel names on the module, or 2) a problem with how the serial port
is communicating with the module (only applies if you are using a
serial communication module, as opposed to an Ethernet module).
For the first issue, you have already tried to reconcile any
differences in tag names by reregistering the MIS files. Since
that didn't work, I would recommend trying to recreate your entire
FieldPoint system in Measurement & Automation Explorer (MAX),
including the IAK file. I know it is kind of extreme, but I would
recommend just deleting your FieldPoint configuration in MAX, deleting
the IAK file, and resetting the address and recreating your
configuration.
I think that troubleshooting a serial communication problem could be a
little more difficult. I would recommend browsing through the
following documents for some possible troubleshooting ideas.
FieldPoint Serial Network Module Common Problems
Let us know if this solves the problem or if you have any further question.
Regards,
Travis Gorkin
Applications Engineering
National Instruments
www.ni.com/support

ERROR[WSDL Parser] Attribute 'name' not found at: wsdl:documentation

Hello,
I'm currently having a problem generating the Java source code from a WSDL, because the WSDL2Service ant class bundled with the WLS install (in the /server/lib/webservices.jar library) does not comply with the WSDL XSD.
Check http://schemas.xmlsoap.org/wsdl/
Especially if you add a <wsdl:documentation> in your <wsdl:portType> you end up with a WSDLParser error, while the file perfectly validates through Eclipse:
     <wsdl:portType name="ImportPortType">
          <wsdl:documentation>
               Definitions of available operations through the webservice
          </wsdl:documentation>
          <wsdl:operation name="importData">
               <wsdl:input message="tns:ImportInput" />
               <wsdl:output message="tns:ImportOutput" />
          </wsdl:operation>
     </wsdl:portType> The error is:
[wsdl2Service] Generating web service from wsdl C:\Java\Workspaces\MyWorkspace/WebServices/wsdl/Import.wsdl
[wsdl2Service] weblogic.webservice.wsdl.WSDLParseException: ERROR[WSDL Parser] Attribute 'name' not found at:<wsdl:documentation>Definitions of available operations through the webservice
[wsdl2Service]           </wsdl:documentation>
[wsdl2Service]      at weblogic.webservice.wsdl.WSDLParser.getMustAttribute(WSDLParser.java:263)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlPortType.parsePortType(WsdlPortType.java:29)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlBinding.parseBinding(WsdlBinding.java:45)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlPort.parsePort(WsdlPort.java:46)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlService.parseService(WsdlService.java:37)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlDefinitions.parseDefinition(WsdlDefinitions.java:38)
[wsdl2Service]      at weblogic.webservice.wsdl.WSDLParser.visit(WSDLParser.java:71)
[wsdl2Service]      at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:111)
[wsdl2Service]      at weblogic.webservice.tools.build.internal.WSDL2JavaServiceImpl.runClassgen(WSDL2JavaServiceImpl.java:210)
[wsdl2Service]      at weblogic.webservice.tools.build.internal.WSDL2JavaServiceImpl.run(WSDL2JavaServiceImpl.java:147)
[wsdl2Service]      at weblogic.ant.taskdefs.webservices.wsdl2service.WSDL2Service.doWSDL2JavaService(WSDL2Service.java:211)
[wsdl2Service]      at weblogic.ant.taskdefs.webservices.wsdl2service.WSDL2Service.execute(WSDL2Service.java:131)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[wsdl2Service]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[wsdl2Service]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
BUILD FAILED
C:\Java\Workspaces\MyWorkspace\EAR\ant\build.xml:22: The following error occurred while executing this line:
C:\Java\Workspaces\MyWorkspace\EAR\ant\build.xml:26: The following error occurred while executing this line:
C:\Java\Workspaces\MyWorkspace\EAR\ant\build_config.xml:65: weblogic.webservice.tools.build.WSBuildException: weblogic.webservice.wsdl.WSDLParseException: ERROR[WSDL Parser] Attribute 'name' not found at:<wsdl:documentation>Definitions of available operations through the webservice
          </wsdl:documentation> Digging through the WSDLPortType class (package weblogic.webservice.wsdl ) decompiled code, I clearly saw this kind of parsing does not respect the WSDL XSD:
public class WsdlPortType {
    public WsdlPortType() {
        operations = new ArrayList();
    void parsePortType(WSDLParser wsdlparser, XMLNode xmlnode, Port port) throws WSDLParseException {
        Iterator iterator = xmlnode.getChildren();
        do {
            if(!iterator.hasNext())
                break;
            XMLNode xmlnode1 = (XMLNode)iterator.next(); // THE NEXT XML NODE IS NOT COMPULSORILY THE <wsdl:operation> ONE!!!
            String s = wsdlparser.getMustAttribute("name", xmlnode1);
            if(wsdlparser.canHandleMethod(xmlnode1)) {
                weblogic.webservice.Operation operation = port.addOperation(s);
                WsdlOperation wsdloperation = new WsdlOperation();
                wsdloperation.parseOperation(wsdlparser, operation, xmlnode1);
                operations.add(wsdloperation);
        } while(true);
    private ArrayList operations;
} X-(
Edited by maxxyme at 03/13/2008 10:34 AM

I created a new project and tried to repeat the steps to import. Still getting the same error.
This is my Message type definition if that helps
<message name="Composite_Weather_ServiceRequestMessage">
          <part name="payload" type="tns1:NDFDgenRequest"/>
     </message>
     <message name="Composite_Weather_ServiceResponseMessage">
          <part name="payload" type="tns1:NDFDgenResponse"/>
     </message>

Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

Error:[The specified object was not found in the store] when trying to read another mail box using Delegate access

Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Changing ODBC Connection results in Field Name not found error

Post Author: POH
CA Forum: Data Connectivity and SQL
I am using CR XI with mySQL 5.0 and VB6. The computer I use to to design my reports has a odbc dsn which is used to develop the reports. On the production computer the same odbc dsn is present but has a different server, database, user and password entries. I am using the code below to set the connection and test the database. For Each objDatabaseTable In objDatabaseTables objDatabaseTable.SetLogOnInfo "servername", "dbname", "user", "pw" objDatabaseTable.ConnectionProperties("UseDSNproperties") = True Next crxDatabaseTable crxDatabase.Verify No Error is given and the report in this case does not have any sub reports.Now when the command ViewReport is run the CR viewer is shown but the report is not displayed. The viewer shows the error "Filed Name not found". I do not have any formel fields in the report and I have checked to make sur that both databases have the same structure. Can any body help me. Regards Paul

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Error: Datasource name not found and no default driver specified

HI All,
I have MySQL as my data base.
I created one universe on top of MySQL. Then i made one webI report on top of that and exported it to BO Portal (Infoview).
Now when I am refreshing this report, it gives me below error in Infoview while its getting refreshed in WebI.
[Database Error] [Microsoft ODBC Driver manager] Datasource name not found and no default driver specified.
WIS 10901
I found SAP Note 1200396 and have created DSN with Same name on Server.
But still I am facing same problem. I have not clustered enviroment.
Guys any one have some idea about this?
I will appreciate your answer.
Thanks in advance,
Rishit

If your BOBJ server runs on 64bit windows you should set up the DSN using the 32bit ODCB utility (<Windowa installation director>\SysWOW64\odbcad32.exe )
Regards,
Stratos

Webi Refreshing Error :database name not found and no default driver specified

Hi All,
When I refreshing the webi report from Launchpad getting bellow error
"database name not found and no default driver specified"
Bellow is the Screen shot
It is refreshing in webi Rich client (server and client tools are in same system) but not from Launch pad
1. Environment :BI 4.0 SP4
2. Server and client tools are installed in same system
3. Created a 32 bit odbc, universe connection is responding properly and report refreshing in rich client(I could not find 64 bit odbc) .
Can Please suggest me where I am doing wrong
Regards,
Mahi

Hi Mahi,
Seems like your BO server is 64 bits and you have created a 64 bits DSN; whereas your database requires 32 bits DSN.
Try below steps:
1. Navigate to the C:\Windows\SysWOW64 directory and open odbcad32.exe. This will open the ODBC Data Source Administrator for 32-bit drivers on the 64-bit server. NOTE: The ODBC Data Source Administrator that is located by clicking Start and Administrative Tools will only create 64-bit ODBC connections.
2. Click on the System DSN tab
3. Click on Add to create a new Data Source
4. Provide the database details
5. Your 32-bit ODBC data source is now ready for use.
Hope it will help.
Regards,
Yuvraj

OBDC Data Source Error - Data source name not found and no default driver specified

Hello,
I get this error whenever I try to use the "Modify Microsoft Access Database" tab to update my
Access 2000 database after a conversion:
Unable to connect to target database.
java.sql.SQLException: [Microsoft] [ODBC Driver Manager]
Data source name not found and no default driver specified
Now, the weird thing is that when I log in as Administrator and go to the "Control Panel" there is
no "ODBC Data Sources" option to chose from. So I went to the "Microsoft ODBC Administrator"
from the "Configuration and Migration Tools" tab instead. I tried configuring "omwb_msaccess"
under the "User DSN" tab with both the name of my Access file, and the "small.mdb" file that was
in the omb directory. No go for either one. Whatever I try I still get the same pop-up box.
Question:
(1) What should I be putting for the "ODBC Data Source" when I try to Migrate my Access Database?
(2) Any other idea/configuration issue I might be missing that could do this? The process works up
to the Access Update point, and I configured the repository correctly.
Thanks
Aaron - [email protected]

Nope, I'd already tried both of those things. I checked again, but no go.
I think the problem may be that I'm not entering the right value in the
"ODBC Data Source" field on the Migration Workbench "Modify Microsoft
Access Database" form - the same one where you enter a "Username" and
"Password" for the conversion. What should I be entering here? What is
the standard filename?
The log files aren't very informative to me. Here is the odbcconf.log:
==============
ODBCConf called with arguments: '/S /Lv odbcconf.log /F C:\WINNT\System32\mdaccore.rsp'
Data Struct:
     Reboot First : 0
     Use Response File : 1
     Response File : 'C:\WINNT\System32\mdaccore.rsp'
     Erase Response File: 0
     Silent : 1
     Continue on Error : 0
     Log Mode : 2
     Log File : 'odbcconf.log'
     Actions:
          8, '(null)', '(null)', ''
          6, 'MS Code Page Translator|Translator=MSCPXL32.dll||', '(null)', '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
          5, 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||', '(null)', '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
          1, 'Microsoft ODBC for Oracle', 'CPTimeout=60', '"Microsoft ODBC for Oracle" "CPTimeout=60"'
          17, 'simpdata.tlb', '(null)', '"simpdata.tlb"'
EXECUTING ACTIONS
Executing Action: INSTALLDRVRMGR
          arg1: '(null)'
          arg2: '(null)'
          args: ''
Install Driver Manager succeeded
          Return HR: 0x0
Executing Action: INSTALLTRANSLATOR
          arg1: 'MS Code Page Translator|Translator=MSCPXL32.dll||'
          arg2: '(null)'
          args: '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
INSTALLTRANSLATOR SQLInstallTranslatorEx succeeded
          Return HR: 0x0
Executing Action: INSTALLDRIVER
          arg1: 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||'
          arg2: '(null)'
          args: '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
INSTALLDRIVER SQLInstallDriverEx succeeded
          Return HR: 0x0
Executing Action: CONFIGDRIVER
          arg1: 'Microsoft ODBC for Oracle'
          arg2: 'CPTimeout=60'
          args: '"Microsoft ODBC for Oracle" "CPTimeout=60"'
CONFIGDRIVER SQLConfigDriver succeeded
          Return HR: 0x0
Executing Action: REGTYPELIB
          arg1: 'simpdata.tlb'
          arg2: '(null)'
          args: '"simpdata.tlb"'
          Return HR: 0x0
===========
Here is a snippet from the error.log:
==========
** Oracle Migration Workbench
** Release 9.2.0.1.0 Production
** ( Build 20020308 )
** ORACLE_HOME: c:\
** user language: en
** user region: US
** user timezone: PST
** file encoding: Cp1252
** java version: 1.1.8.16
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 5.0
** Classpath:
c:\\Omwb\olite\Oljdk11.jar;c:\\Omwb\olite\Olite40.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;c:\\Omwb\jlib;c:\\Omwb\jlib\Omwb.jar;c:\\Omwb\jlib\oembase-9_2_0.jar;c:\\Omwb\plugins\SQLServer6.jar;c:\\Omwb\plugins\SQLServer7.jar;c:\\Omwb\plugins\SQLServer2K.jar;c:\\Omwb\plugins\Sybase11.jar;c:\\Omwb\plugins\Sybase12.jar;c:\\Omwb\plugins\MSAccess.jar;c:\\Omwb\plugins\MySQL.jar;c:\\Omwb\drivers\mm.mysql.jdbc-1.2a;c:\\Omwb\plugins\Informix7.jar;c:\\Omwb\drivers\ifxjdbc.jar;c:\\Omwb\plugins\db2400v4r5.jar;c:\\Omwb\drivers\jt400.jar;c:\\lib\xmlparserv2.jar;c:\\rdbms\jlib\xsu111.jar;c:\\jdbc\lib\classes111.zip;c:\\lib\vbjorb.jar;c:\\jlib\netcfg.jar;c:\\jlib\ewt3.jar;c:\\jlib\ewtcompat-3_3_15.jar;c:\\jlib\share.jar;c:\\jlib\help3.jar;c:\\jlib\oracle_ice5.jar;c:\\jlib\kodiak.jar
** Started : Tue Jul 23 12:13:42 PDT 2002
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
** The following plugins are installed:
** Microsoft Access Release 9.2.0.1.0 Production
** Active Plugin : MSAccess
** Shutdown : Tue Jul 23 12:14:59 PDT 2002
I appreciate any assistance you could render me.
Thanks - Aaron

Infa Error: Data source name not found and no default driver specified

All,
Infa version 8.1, DAC 795. Plain vannila installation with SQL server. Both client and server installed in same machine.
DAC connectivity both with infa and oltp working fine. When ETL is run, Informatica session logs are giving following error:
ERROR 10/2/2008 3:49:01 PM node01_PPMBIDEV1 MAPPING CMN_1022 Database driver error...
CMN_1022 [
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Database driver error...
Function Name: Connect
Database driver error...
Function Name: Connect
Database Error: Failed to connect to database using user [MDVYAS] and connection string [PPMCRMDEV1@OracleBI_Warehouse].]
Any pointers appreciated

Hi,
Did you follow step 4.13.2 - 'Configuring Relational Connections in Informatica PowerCenter Workflow Manager' of the installation and configuration guide?
Manoj.

Data source name not found and no default driver specified in Database Error Code -2147467259

When I say it works, I mean that it gets no errors and writes the data to the SQL Table. The Connection name and table name are correct as written.

Hey people,
I'm having issues when trying to use the DB Tools open connection.vi in order to write data to a SQL data table. In my VI I have two different states that handle different data based on a specific test specified to run, but both are inserted into the same SQL table. I get the unspecified error "NI_Database_API.lvlibB Tools Open Connec (String).vi->Main.vi<ERR>ADO Error: 0x80004005
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in NI_Database_API.lvlibB Tools Open Connec (String).vi->Main.vi"
when running one test but not the other...since the error is unspecified I'm having a hard time finding any information that might help me.

Error when deploying BPM application: The specified process was not found

Hi,
I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
[04:55:19 PM] HTTP error code returned [500]
[04:55:19 PM] Error message from server:
There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details.
[04:55:19 PM] Check server log for more details.
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
The log file in the server console shows this:
Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
Thanks,
AAPDL

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

IDT ODBC Error - Data source name not found...

Hello,
In the IDT, I have created a successful connection to a Relational Connection to my SQL Server datasource. However, when I try to access the data in the Data Foundation, I get the error, "ODBC Driver Manager. Data source name not found and no default driver specified. I am trying to use a shortcut to the connection in the repository. I am able to make a local connection to this database using the same steps above but I'm only getting this error when using the respository connection.
I appologize if I have not explained this well or used the right terminology as I've only been using this tool for about a month with very little support. The support I do get does not know what this problem is as they are able to connect to it fine on their computer.
Thank you for your time and responses,
Aaron

Hi Aaron
This is the product limitation.
Combination of 32-bit and 64-bit data providers in a Multi-source enabled Data Foundation is not supported.
Remove ODBC Drivers 32-bit for SQL Server from the user's workstation and Install ODBC Drivers
64-bit.
Regards,
Veer S.

Error 32812: specified tag name not found

Similar Messages

Maybe you are looking for