Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

Similar Messages

  • Re: The specified topic [0] was not found

    I get this error when I click on a link in an email on my iPhone to a thread that I'm monitoring.
    I don't get the error when I click on the same link from my PC.
    Does anyone have a workaround?
    Specifically, it looks like this:
    Apple Discussions
    Apple.com>Support>Discussions
    Error
    The specified topic [0] was not found.
    Useful links:
    Forum Home - browse the forums here.
    Search Forums - visit the search page to query all forum content
    Apple.com>Support>Discussions
    Thanks in advance for any response :o)

    Hello everettwolf,
    As Don Archibald posted, the Login Error message is a know issue, that the Hosts / Sysops are aware of, and that hopefully, will soon be resolved.
    And here is a more comprehensive list, of the other Topics in this Forum, concerning this issue, that have been previously posted.
    You'll find additional info, comments by a Host, and other temporary work-arounds.
    Such as, if you do not quit your browser, there is no need to login each time you return to Discussions.
    After Log-in, " An Error Has Occurred"....
    Fourm redirection error after login
    Old Login page
    What Gives With The Login?
    An error has occurred. We apologize for the inconvenience
    Error no matter browser I use
    More forum unreadable also user unfriendly
    i know this has been discussed but the login error...
    Log in errors
    Every time I log in and try to post I get error message
    Still receiving "Error" message while trying to login?
    Error after login
    Error when logging into Apple/Support/Discussions
    Login for Discussion Forum Problems
    Error logging in
    How come?
    Error after login
    Error message on successful logo
    Problems logging in
    Each time I sign on it says "Sorry error"
    C'mon, Enough Already with the Error Message Upon Logging In
    ali b

  • UI error "The requested lookup key was not found in any active" workaround

    Hi All.
    Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
    Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
    Some facts:
    - The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
    - The error occur because the SAP client fail to provide the correct/entire connection-string
    - The problem is actually an underlying problem from Microsoft (try searching google with the error message)
    - Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
    Some additional observations
    - The error mostly happen just after startup of a windows machine
    - We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
    - Seem to be happening more often of slower machines
    Workaround
    Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
    Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

    Hi,
    I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
    In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
    Is it possible connect twice?
    Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
    It is over
    Windows XP 2002 SP2
    SBO2007A patchlevel 15
    VS 2005 C#
    SQL Server 2005
    Thank you

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • Why do I get Math Exception Error - the underlying analysis dll was not found

    I can find this question in the list, but the answer is about .NET.
    I am only using MFC on MS2010. Anybody know which dll I should include?
    Thanks

    Hello Rick -
    My guess is that you've only installed the MFC 2010 support, but not run through the actual MStudio installer.  The following instructions come from the "Installing C++ MFC Legacy Support if Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 Is Not Installed" section of the MFC 2010 support readme.  Please make sure you've followed these instructions, I think it should resolve the errors you're seeing.
    Complete the following steps to install C++ MFC Legacy Support on a machine that does not already have Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 installed:
    Log on as Administrator or as a user with administrator privileges.
    Install Measurement Studio 2010 or later .NET support for Visual Studio 2010. You can perform a minimal installation—de-select Help, Examples, Visual Studio Integration, Additional Features, and Device Drivers from the installer feature tree. This installs the underlying dependencies required by the Analysis and DataSocket Visual C++ MFC class libraries.
    Double-click the MStudioVS2010CppLegacyR2 self-extracting .exe file.
    Enter the password provided in the email you received from National Instruments validating your use of this product and click OK. The file automatically extracts to Program Files\National Instruments\MeasurementStudioVS2010\VCNET on a 32-bit operating system or Program Files (x86)\National Instruments\MeasurementStudioVS2010\VCNET on a 64-bit operating system.
    Navigate to the NIACTIVEX folder within the extracted VCNET directory and double-click setup.exe to run the NI Measurement Studio ActiveX Control Installer. Follow the instructions that appear on the screen. You can use the same serial number for this installer that you used to activate Measurement Studio 2010 or later. This installs underlying dependencies required by the User Interface and 3D Graph class libraries. The R2 version includes an updated NI Measurement Studio ActiveX Control Installer; National Instruments recommends using the latest version of this installer.
    NickB
    National Instruments

  • HP Officejet Pro 8500 A909G – The HP Imaging Device was not found

    I have a HP Officejet Pro 8500 Wireless A909G.  My operating system is Windows 7 Home Premium 64bit that was upgraded from the original Windows Vista 64bit that came installed on my HP Pavilion Elite m9400t CTO Desktop PC.
    After performing the Windows 7 upgrade I installed OJP8500vA909_Full_13 to support the 8500, and everything worked fine.
    I recently noticed that the scanner function had stopped working from Solution Center, and uninstalled V13.  I downloaded and installed OJP8500vA909_Full_14.  The install completes without error, but then I get scanner error “The HP imaging device was not found”  with extended error code 8, [(1,0, -2147221164)].
    I have performed all the suggested Solution Center steps to resolve the error without success. Including:
    1) Updated the firmware to OfficejetPro8500A909g_R1006B_ENG
    2) Ran OJP8500vA909_Corporate_Scrubber_14
    3) Uninstalled all programs, deleted %temp% files, and changed the startup using MSCONFIG.
    4) Deleted all other imaging programs including camera software, and reinstalled.
    5) Performed HP Update and installed network fix.
    I have performed these steps many times and keep getting the same error.   The scanner works using the front panel function “Scan to network folder.
    Please help.
    This question was solved.
    View Solution.

    First of all, i am sorry to hear your having a problem with your Scanning Feature on your PC. How is the computer and printer connected together?
    Please download and run the following tool. This is what we call the HP Scan Diagnostic Utility.  After downloading and running the tool, can i have you reply with the problems (if any) it finds.  Thanks so much!
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96509-1&cc=us&dlc=en&lc=en&...=
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an HP Employee.

  • Item Category: The specified category assignment is not found for this item

    HI All,
    I am loading Item category Assignment for Purchasing category Set, the standard prg fails and gives the error "The specified category assignment is not found for this item".
    Where as for the inventory category set its working fine and the assignment is through.
    Are there any changes required for this.
    Thanks
    Basaw

    As the error indicates, your servlet does not support GET method calls. Override doGet() method to do what you are doing in doPost to avoid this error. If you want your servlet to serve GET as well as POST methods, override service method instead.

  • Error 32812: specified tag name not found

    Hello,
    I've just started using LabView 7.1 (under Windows) with a Compact Fieldpoint and developed a small data acq. test program. I've built an install and installed the program on another PC. I've also installed MAX onto the target PC and loaded up the Fieldpoint iak file into MAX. Everything worked fine the first time I did this and my program communicated with the Fieldpoint. Now, I've just installed a new version of my program and I'm getting an error 32812 specified tag name not found when I use the FP Read.vi.
    Any ideas what is wrong? I presume that my iak file has the wrong tags in it? But it's the same one saved from my development PC! I did notice a slight difference in the versions of MAX, my development PC has
    3.1.1.3003 and the target PC has 3.1.0.3021. If this is the problem where do I find an updated install for MAX
    Many thanks
    Mike

    Hello Mike-g
    This is a common error. Checkout the following Knowledge base for more information on how to deal with it:
    http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument.
    Hope it helps...

  • Error when loading FIM portal in new installation: The requestor's identity was not found.

    I have just installed the FIM portal into my test environment.  The synchronisation service was already working perfectly (can provision users from a .csv file).
    The FIM Service and Portal are installed on a server (we'll call it SPF1), and the FIM sync service on another server (SYNC1)
    Whenever I try to log on to the fim portal with my standard user account (it has never worked), I get the following error:
    Unable to process your request.
    Please contact your help desk or system administrator.
    Error processing your request: The server was unwilling to perform the requested operation.
    Reason: The requester of this operation is invalid.
    Correlation Id: 7da76fce-5c9a-4596-90f7-8d7243c21de8
    Details: The requestor's identity was not found.
    >Go to Forefront Identity Manager home page
    (The web page header does show the FIM logo, so the portal itself is there).
    In the ForeFront logs on SPF1, I get the following:
    Log Name:      Forefront Identity Manager
    Source:        Microsoft.ResourceManagement
    Date:          1/13/2015 5:48:08 PM
    Event ID:      3
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SPF1.testdomain.internal
    Description:
    GetCurrentUserFromSecurityIdentifier: No such user TESTDOMAIN\StandardUser, S-1-5-21-1(sid goes here)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft.ResourceManagement" />
        <EventID Qualifiers="0">3</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-14T01:48:08.000000000Z" />
        <EventRecordID>523</EventRecordID>
        <Channel>Forefront Identity Manager</Channel>
        <Computer>SPF1.testdomain.internal</Computer>
        <Security />
      </System>
      <EventData>
        <Data>GetCurrentUserFromSecurityIdentifier: No such user TESTDOMAIN\StandardUser, S-1-5-21-1(sid goes here)</Data>
      </EventData>
    </Event>
    Log Name:      Forefront Identity Manager
    Source:        Microsoft.ResourceManagement
    Date:          1/13/2015 5:48:08 PM
    Event ID:      3
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SPF1.testdomain.internal
    Description:
    Requestor: Internal Service
    Correlation Identifier: da87f241-eee5-4bf5-b1dd-8a6728a2c627
    Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: IdentityIsNotFound
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetUserFromSecurityIdentifier(SecurityIdentifier securityIdentifier)
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUser()
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Enumerate(Message request)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft.ResourceManagement" />
        <EventID Qualifiers="0">3</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-14T01:48:08.000000000Z" />
        <EventRecordID>522</EventRecordID>
        <Channel>Forefront Identity Manager</Channel>
        <Computer>SPF1.testdomain.internal</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Requestor: Internal Service
    Correlation Identifier: da87f241-eee5-4bf5-b1dd-8a6728a2c627
    Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: IdentityIsNotFound
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetUserFromSecurityIdentifier(SecurityIdentifier securityIdentifier)
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUser()
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Enumerate(Message request)</Data>
      </EventData>
    </Event>
    Further, I note that it has trouble connecting to the web exchange connector.  I wonder if this is because I used an alias (for easy migration in the future) for which the certificate does not match the name for?  I'm connecting to "mail.testdomain.internal",
    although that's actually a NLB group between two CAS/HUB servers.
    Log Name:      Application
    Source:        Microsoft.ResourceManagement.ServiceHealthSource
    Date:          1/13/2015 7:43:49 PM
    Event ID:      12
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:     SPF1.testdomain.internal
    Description:
    The Forefront Identity Manager Service cannot connect to the Exchange Web Service.
    The connection failure may be due to a network failure, firewall configuration error, or other connection issue.  Additionally, the failure may be due to incorrect Exchange Web Service configuration.
    Verify that the Exchange Web Service is reachable from the Forefront Identity Manager Service computer.  Ensure that Exchange is running, that the network connection is active, and that the firewall is configured properly.  Last, ensure that the
    Exchange Web Service configuration is correct in the Microsoft.ResourceManagement.Service.exe.config file.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft.ResourceManagement.ServiceHealthSource" />
        <EventID Qualifiers="0">12</EventID>
        <Level>3</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-14T03:43:49.000000000Z" />
        <EventRecordID>7581</EventRecordID>
        <Channel>Application</Channel>
        <Computer>SPF1.testdomain.internal</Computer>
        <Security />
      </System>
      <EventData>
        <Data>The Forefront Identity Manager Service cannot connect to the Exchange Web Service.
    The connection failure may be due to a network failure, firewall configuration error, or other connection issue.  Additionally, the failure may be due to incorrect Exchange Web Service configuration.
    Verify that the Exchange Web Service is reachable from the Forefront Identity Manager Service computer.  Ensure that Exchange is running, that the network connection is active, and that the firewall is configured properly.  Last, ensure that the
    Exchange Web Service configuration is correct in the Microsoft.ResourceManagement.Service.exe.config file.</Data>
      </EventData>
    </Event>
    I'm not really sure where to start investigating at this point.  The only other thing to note is that after installing the portal, I didn't see a new management agent in the synchronization service (I thought one was supposed to appear, though I could
    be mistaken).

    I eventually figured this out - it was that the portal management agent hadn't been created yet, I had to create it.

  • The tag name: "embed" Not found in currently active versions.[XHTML 1.0 transitional]

    Hello I have this message "The tag name: "embed" Not found in
    currently active versions.[XHTML 1.0 transitional]" appear when I
    validate one of my pages in my site, the page contains a flash
    picture/animation. Please can anyone explain how I can correct this
    error?
    The tag name: "embed" Not found in currently active
    versions.[XHTML 1.0 transitional] this is in relation to:
    "<embed src="Map.swf" quality="high" pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="536"
    height="437"></embed>"
    Any help would be appreciated.
    Thanks Steve

    > how I can correct this error?
    You don't. You ignore it. The <embed> tag is not valid
    HTML, but it is
    required to have reliable rendering of your Flash across
    various browsers.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Steve@FHS" <[email protected]> wrote in
    message
    news:fcm6ss$kvs$[email protected]..
    > Hello I have this message "The tag name: "embed" Not
    found in currently
    > active
    > versions.[XHTML 1.0 transitional]" appear when I
    validate one of my pages
    > in my
    > site, the page contains a flash picture/animation.
    Please can anyone
    > explain
    > how I can correct this error?
    >
    > The tag name: "embed" Not found in currently active
    versions.[XHTML 1.0
    > transitional] this is in relation to:
    >
    > "<embed src="Map.swf" quality="high"
    > pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
    > n=ShockwaveFlash" type="application/x-shockwave-flash"
    width="536"
    > height="437"></embed>"
    >
    > Any help would be appreciated.
    >
    > Thanks Steve
    >
    >

  • Error 32812 (Specified Tag Name not Defined) from FP Read

    I built an application using LabVIEW 7.1 and FieldPoint 4.1.  It
    performed well until about a week ago.  Suddenly, I started getting
    error 32812 (Specified Tag Name Not Defined) when doing an FP Read to
    read all the channels on an FP-RLY-420.  This is installed at a
    client's site, but my client assures me that nothing changed in the
    computer configuration.  There is a dual serial card installed (SIIG
    Cyberserial DualPCI dual 16550
    RS232 Serial I/O Card), which does seem to cause problems (mouse jumps
    erratically), and I wonder if this card could be contributing to the
    problem, but I'm not sure why I would get the specific error message
    I'm getting.
    In looking for info on the problem, I did find an article on
    registering the MIS files, but I have tried selecting "Find Devices"
    through MAX while logged on as an admin, and the error still occurs.
    If anyone has any ideas as to what could be causing the problem, it would be greatly appreciated.
    Thank you,
    Jason

    Hello Jason,
    I think that the error you are seeing could be caused by either 1) a
    mismatch between the tag names saved on your computer and the actual
    channel names on the module, or 2) a problem with how the serial port
    is communicating with the module (only applies if you are using a
    serial communication module, as opposed to an Ethernet module). 
    For the first issue, you have already tried to reconcile any
    differences in tag names by reregistering the MIS files.  Since
    that didn't work, I would recommend trying to recreate your entire
    FieldPoint system in Measurement & Automation Explorer (MAX),
    including the IAK file.  I know it is kind of extreme, but I would
    recommend just deleting your FieldPoint configuration in MAX, deleting
    the IAK file, and resetting the address and recreating your
    configuration. 
    I think that troubleshooting a serial communication problem could be a
    little more difficult.  I would recommend browsing through the
    following documents for some possible troubleshooting ideas.
    FieldPoint Serial Network Module Common Problems
    Let us know if this solves the problem or if you have any further question.
    Regards,
    Travis Gorkin
    Applications Engineering
    National Instruments
    www.ni.com/support

  • Unable to connect to the analysis server the server name was not found

    Hi,
    One of the user is trying to run reports from PWA 2010 and gets the below error.
    Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
    Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
    Please advice why?

    Dear Project Help,
    Please help the community with more information.
    Which kind of reports are you running? Excel using OLAP?
    If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
    I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
    Let me know if you need any help on this.
    Cheers

  • HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice.  What now?

    When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message.  What now?

    Hi texasslagle,
    It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
    There is an article that you may want to use to try to complete your install here -
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

    I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
    I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
    THANKS

    Hello Paneesh,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for