Error 500: Blank PHP File

Hello,
I am trying to make an Azure website while using an Azure database, using DropBox as a deployment.
The default site (the index.php works fine), but then when I connect my site to the Azure database, I get an internal service error, error 500 and complains on the webpage with this message The page cannot be displayed because an internal server error
has occurred. I even use my DBTest (the test page used to connect my Azure database to the SQL database created in this test page) and I still get the same error.
Before I got a blank php page and then saying error 500 on the web console.
I looked up on how the error can be fixed, and it is something to do with the Azure service, but I don't know if there's something I can do about this. Any ideas? Also, I am new to Azure, so I apologize in advance if this sounds like a common
novice question.
Any help or advice would be greatly appreciated.

I updated my page and now my index says I'm not allowed to be on this page (which is fine as I synched my DropBox folder), but when I use my DBTest.php file, it comes up as a blank page and when I refresh it, I get informed of an error 500.
That is the problem I have been stuck with today and yesterday.
Any ideas how to fix this?
Once again, any help or advice would be greatly appreciated.

Similar Messages

405 error loading a php file using fastCGI

I'll start off by admitting I'm brand new to JWS. I really appreciate anyone willing to help with this configuration:
GOAL: Install the PHP Engine as a FastCGI Server
http://developers.sun.com/webtier/reference/techart/php2.html#4
I've read a lot of pages on this, and "thought" I had my configuration right.
I'm running SLES 10, and installed php fastcgi using yast2. The path to my php is /usr/bin/php-cgi5. I have copied that file to my plugins directory, as I heard it has to be in a location that web server can reach: /sun/webserver7/plugins/php/php-cgi5.
My configs:
obj.conf
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="restart" from="/" uri="/admingui/"
NameTrans fn="ntrans-j2ee" name="j2ee"
##Me added
# Make everything in URI "/php" come from"/path/to/php" and
# be executed as PHP using the directives in the Object
# named "fastcgi" (defined below)
NameTrans fn="pfx2dir"
from="/php"
dir="/path/to/php"
name="fastcgi"
##End Me added
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index-j2ee"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-j2ee"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log"
##Me Added
# Execute all things with a MIME type of
# "magnus-internal/fastcgi" with options (this requires that
# mime.types be updated to assign this type
# for specified extensions - see below):
# bind-path: localhost:8082
# app-path: /export/my/cgi/php
# min-procs: 1
# PHP_FCGI_CHILDREN: 1
# PHP_FCGI_MAX_REQUEST: 200
# LD_LIBRARY_PATH: /usr/local/php/lib
# PHPRC: /path/to/php/config/dir
# The LD_LIBRARY_PATH can be used to indicate the location
# of the local system's MySQL libraries, etc.
# Note that the PHPRC variable points to the directory
# containing php.ini, not to php.ini itself.
# This can be a single line or a line continued using
# the syntax below
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
bind-path="localhost:8082"
app-path="/export/my/cgi/php"
min-procs="1"
app-env="PHP_FCGI_CHILDREN=1"
app-env="PHP_FCGI_MAX_REQUEST=200"
app-env="LD_LIBRARY_PATH=/usr/local/php/lib"
app-env="PHPRC=/path/to/php/config/dir"
##End Me added
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
##Me Added
# Object to handle assigned names from the Default object
<Object name="fastcgi">
# Anything that ends up here has its type forced to
# "magnus-internal/fastcgi"
ObjectType fn="force-type"
type="magnus-internal/fastcgi"
# Run the request through the FastCGI handler with
# the following options:
# bind-path: localhost:8082
# app-path: /export/my/cgi/php
# min-procs: 1
# PHP_FCGI_CHILDREN: 1
# PHP_FCGI_MAX_REQUEST: 200
# LD_LIBRARY_PATH: /usr/local/php/lib
# PHPRC: /path/to/php/config/dir
# The LD_LIBRARY_PATH can be used to indicate the location
# of the local system's MySQL libraries, etc.
# Note that the PHPRC variable points to the directory
# containing php.ini, not to the php.ini itself.
# This can be a single line or a line continued using
# the syntax below
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
bind-path="localhost:8082"
app-path="/sun/webserver7/plugins/php/php-cgi5"
min-procs="1"
app-env="PHP_FCGI_CHILDREN=1"
app-env="PHP_FCGI_MAX_REQUEST=200"
app-env="LD_LIBRARY_PATH=/usr/local/php/lib"
app-env="PHPRC=/etc/php5/fastcgi/"
</Object>
magnus.conf
Init fn="load-modules" shlib="libj2eeplugin.so"
Init fn="load-modules" shlib="libdavplugin.so" funcs="init-dav,ntrans-dav,pcheck-dav,service-dav"
Init fn="init-dav" LateInit="yes"
Init fn=load-modules shlib="libfastcgi.so"
mime.types (relevant sections only)
type=magnus-internal/parsed-html exts=shtml
type=magnus-internal/cgi exts=cgi,exe,bat,php
type=magnus-internal/fastcgi exts=php,php3,php4,php5
I'm not convinced that I have specified all the php directories as requested. Perhaps something looks off there?
I currently have nothing configured in the fastCGI section of the web admin for the server.
The default page still loads just fine, it's only php files i'm having issue with.
The error I'm receiving is (IP removed):
for host X.X.X.X trying to GET /foo.php, handle-processed reports: HTTP2205: The request method is not applicable to the requested resource.
Thanks,
Nick

Thank you so much for the reply. yes, that appeared to be a typo in my config. Here's the new relevant section
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="restart" from="/" uri="/admingui/"
NameTrans fn="ntrans-j2ee" name="j2ee"
##Me added
# Make everything in URI "/php" come from"/path/to/php" and
# be executed as PHP using the directives in the Object
# named "fastcgi" (defined below)
NameTrans fn="assign-name" from="/php/*" name="fastcgi"
NameTrans fn="pfx2dir" from="/php/*" name="fastcgi"
##End Me added
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index-j2ee"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-j2ee"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log"#####################
I wasn't sure from your prior message if both of the following lines should be in there:
NameTrans fn="assign-name" from="/php/*" name="fastcgi"
NameTrans fn="pfx2dir" from="/php/*" name="fastcgi"
I tried with both, tried with just the first, and still getting a 405. Not sure if i need to, but I am restarting the instance after making changes.
I also tried putting my test file in both the webroot directory:
/sun/webserver7/https-myhostname/docs/foo.php
and in a php subdir of that
/sun/webserver7/https-myhostname/docs/php/foo.php
Still no luck.
Thanks,
Nick
Edited by: wefawefds on Oct 30, 2009 1:54 PM

Error 500, 553, 509

Hi,
I use Oracle 10g2 on a XP windows PC with a emulator cygwin.
I tried to use sqlldr and i had a error 500 but the file exists. I don't understand where is my mistake.
I need a little help, please.
Control file
toto@titi /cygdrive/d/InitialisationFiche/InitFac/par
$ tail -100 InitFac.ctl
LOAD DATA
INFILE '/cygdrive/d/InitialisationFiche/InitFac/MTInitFicArt1011.csv'
TRUNCATE
INTO TABLE TBL_InitFAC
FIELDS TERMINATED BY '|'
(natureArticle, classe, no, natureComptable, designation, uniteBase)sqlldr
toto@titi /cygdrive/d/InitialisationFiche/InitFac
$ sqlldr userid=admin/pwd@WIND control='./par/InitFac.ctl' direct=y
SQL*Loader: Release 10.2.0.3.0 - Production on Ven. Nov. 26 13:16:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Ouverture du fichier (/cygdrive/d/InitialisationFiche/InitFac/MTInitFicArt1011.csv) impossible
SQL*Loader-553: fichier introuvable
SQL*Loader-509: Erreur systÞme : Le fichier spÚcifiÚ est introuvable.
SQL*Loader-2026: le chargement a ÚtÚ abandonnÚ car SQL*Loader ne peut pas poursuivre.But the file exists...
toto@titi /cygdrive/d/InitialisationFiche/InitFac
$ ls -l
total 3453
-rwxrwxrwx+ 1 toto ???????? 3193696 Nov 26 10:43 MTInitFicArt1011.csv
-rwx------+ 1 toto ???????? 31753 Nov 26 10:48 MTInitUnitAlt.csvSomeone has an idea ?
Thanks in advance.
Ludovic
Edited by: user13267902 on 26 nov. 2010 05:04

Welcome to the forums !
Pl post exact details of OS and database versions. What are the permissions on the directories cygdrive, d, InitialisationFiche and InitFac ?
HTH
Srini

Servlet I/O Stream problem: cannot write into file, error 500

I am a new Java developer and now, I am facing a problem regarding the error 500. I try to grab records from a table with a date as a constraint. There are two servlets involed: a) saveRecord and b) getRecord. Servlet getRecord will grab data from a database while another servlet, saveRecord will get the data from servlet getRecord and save it into a file. The codes are as below:
=========================================================================================================================================
// Servlet Name : saveRecord
BufferedInputStream instr     = null;
BufferedOutputStream outstr     = null;
PostMethod http_post          = null;
http_post = new PostMethod("getRecord");
http_client.executeMethod(http_post);
instr     = new BufferedInputStream(http_post.getResponseBodyAsStream());
outstr     = new BufferedOutputStream(new FileOutputStream("c:\student.csv"), false));
int byte_at;
while (-1 != (byte_at = instr.read())) {
     outstr.write(byte_at);
=========================================================================================================================================
// Servlet Name : getRecord
ServletOutputStream out     = response.getOutputStream();
StringBuffer str_buf     = new StringBuffer();
str_buf = generateStudentAc();
out = response.getOutputStream();
FileStream(out, response, str_buf);
// Function Called
private StringBuffer generateStudentAc() {
     StringBuffer str_buf = new StringBuffer();
     String date = "2000-01-01";
     statement = connection.createStatement();
     resultset = statement.executeQuery("SELECT NAME, ADDRESS FROM STUDENT WHERE DATE>'" + date + "';
     // Write column headers
str_buf.append("NAME,ADDRESS");
String data_row;
while (resultset.next()) {
          data_row = "\n";
          data_row += "\"" + resultset.getString("STUDENT") + "\"";
          data_row += ",\"" + resultset.getString("ADDRESS") + "\"";
          // Write row
          str_buf.append(data_row);
     return str_buf;
// Function called
private void FileStream(ServletOutputStream out, HttpServletResponse response, StringBuffer str_buf) {
     BufferedOutputStream buf_out = null;
// Create input/output streams
     buf_out     = new BufferedOutputStream(out);
     int length     = str_buf.length();
     // Read/Write
     for (int i = 0; i < length; i++) {
          buf_out.write(str_buf.charAt(i));
=========================================================================================================================================
Then, the result will be post back to a JSP page. It didn't work when the records in database growing bigger ( > 100 000 records) but works nice while the records are still in a small quantities ( < 20 000 records). It seems that no record can be inserted into the file and the JSP page becomes blank. When I opened the csv file, I found a message"Error 500:" inside it.
Hope you all experts can help to figure out this problem. TQ

I am amatuer in Java Programming, so I don't know how to implement serializable interface but I will look through it.
However, as I mention before, the code run perfectly if there are not much records un the table. But once there are more and more table added in (> 1000 000 records) in the table, it becomes unstable - sometime it works but most of the time it doesn't. So, I didn't find any different event I replaced the code with String date = "=2000-01-01".
Anyway, thanks for your help.

Printing user validation errors from .php file back onto a form

Hey all. I have written a simple contact form with the extention .php. It includes the php validation and the form inputs on one page. If the input does not validate, a warning in red is printed at the top of the form after the user pushes submit. When I cut and paste the php validation code into a seperate file, the validation errors print on a blank screen. What I want is to have the same results with a seperate php file as I do when I include the php code on the form. (print errors from the seperate php validation file back onto the form). Thanks for taking a look
<h1><span class="bodyheader1">Contact </span><span class="bodyheader2">Us</span></h1>
    <p class="subheading">Tell us what's on your mind:</p>
    <?php
    if(isset($_POST['send_comment']))
        //Validating the comment field
        //checking if a first_name field has been entered
        if($_POST['first_name'] != "")
            //Saitizing first_name with a filter
            $_POST['first_name'] = filter_var($_POST['first_name'], FILTER_SANITIZE_STRING);
            //Checking for no input
            if($_POST['first_name'] == "")
                //If no input, return error message
                $errors .='Please enter a valid first name.<br/>';
        else
            //Error message
            $errors .='Please enter your first name.<br/>';
        //Validating the last_name field
        //checking if last_name has been entered
        if($_POST['last_name'] != "")
            //Saitizing last_name with a filter
            $_POST['last_name'] = filter_var($_POST['last_name'], FILTER_SANITIZE_STRING);
            //Checking for no input
            if($_POST['last_name'] == "")
                //If no input, return error message
                $errors .='Please enter a valid last name.<br/>';
        else
            //Error message
            $errors .='Please enter your last name.<br/>';
        if($_POST['email'] != "")
            $email = filter_var($_POST['email'], FILTER_SANITIZE_EMAIL);
            if (!filter_var($email, FILTER_VALIDATE_EMAIL))
                $errors .= "$email is not a valid email address.<br/>";
        else
            $errors .= 'Please enter your email address.<br/>';
        //Validating the comment field
        //checking if a comment has been entered
        if($_POST['comment'] != "")
            //Saitizing comment with a filter
            $_POST['comment'] = filter_var($_POST['comment'], FILTER_SANITIZE_STRING);
            //Checking for no input
            if($_POST['comment'] == "")
                //If no input, return error message
                $errors .='Please enter a comment.<br/>';
        else
            //Error message
            $errors .='Please enter a comment.<br/>';
        if(!$errors)
            $mail_to = '[email protected]';
            $subject = 'Contact form ' . $_POST['first_name'];
            $message = 'First Name: ' . $_POST['first_name'] . "\n";
            $message .= 'Last Name: ' . $_POST['last_name'] . "\n";
            $message .= 'Email: ' . $_POST['email'] . "\n";
            $message .= 'Comment: ' . $_POST['comment'] . "\n\n";
            mail($mail_to, $subject, $message);
            echo "<script>document.location.href='thankyou.html'</script>";
        else
            echo '<div style="color: red">' . $errors . '<br/></div>';
?>
*All fields are required<br />
<br />
    <form name="contact" method="post" action="contact.php">
        <p>First Name: <br />
          <input name="first_name" type="text" value="<?php echo $_POST['first_name']; ?>" size="30" maxlength="50" /><br />
          <br />
          Last Name: <br />
          <input name="last_name" type="text" value="<?php echo $_POST['last_name']; ?>" size="30" maxlength="50" /><br />
          <br />
          E-mail: <br />
          <input name="email" type="text" value="<?php echo $_POST['email']; ?>" size="40" maxlength="200" /><br />
          <br />
          Comment: <br />
          <textarea name="comment" rows="5" cols="50"><?php echo $_POST['comment'];?></textarea>
          <br />
         </p>
      <p><input type="submit" name="send_comment" />
      </p>
    </form>

You want the form to submit its results to a separate file which processes the data. If this separate file finds errors, you want it to return control to the form page which would a) display the error messages, and b) populate the fields with the data entered?
If that's the case, then the processing file would have to send the errors and the data back to the form page either as a) URL variables, b) a cookie, or c) entries in a database.
Does that help?

404 error when hit submit from php file for requested path E:\vise\jqproject\web\errorpages\403_error.htm

I have a php script that when I hit submit, it submits the form to another php file with a get command. This worked about a month ago, but this month it's having issues. This is what the relevant code looks like in the table php file. Running
table.php shows the table in the browser and has 404 errors when I hit submit.
table.php:
    <body>
        <h1> Visual Evaluation Entry Table </h1>
        <form method="get" action="visEupload.php">
    <table id="bigTable" border="1">
        <thead>
         <tr>
           
         <th id="bandY" class="col3">Bands @263mm Y</th><th id="bandM" class="col3">Bands @263mm M</th><th id="bandC" class="col3">Bands
@263mm C</th><th id="bandK" class="col3">Bands @263mm K</th><th id="Comments" class="col3">Comments</th>
         </tr>
        </thead>
        <tbody>
            <tr name="MCBands" id="9214">
                
                
                
                
                
                <td><input name="bandY" ></td> 
                <td><input name="bandM" ></td> 
                <td><input name="bandC" ></td> 
                <td><input name="bandK" ></td>
                <td><input name="comment" ></td>
            </tr>
        </tbody>
    </table>
      <input id="submit" type="submit" class="list" name="submit" value="Submit To Database" >
       
       </form>
    </body>
The server is mapped so when we run it off of the server, we use the server ip address and my file name and skip the rest of the path, which works fine with the table.php file, so that mapping appears correct. When I run it off of the server (from my
desk) and hit submit it gives me a 404 file or directory not found. When I run it locally on the server, it's saying it can't find the file name, but it says the requested url is `http://localhost:80/errorpages/403_error.html.` Physical path: E:\vise\jqproject\web\errorpages\403_error.html.
The error message says the notification is from the MapRequestHandler of Module IIS Web Core. I'm not sure why the requested url/path isn't referring to visEupload.php.
(Running on the server) When I change the action in the table.php get to include the IP address, it's behaving weirdly:
Module IIS Web Core Notification MapRequestHandler Handler PHP53_via_FastCGI, Requested URL `
    http://localhost:80/13.141.xxx.xx/visEupload.php?bandy=xx&bandM=xx&bandc=hj&bandk=xx&comment=xx&submit=submit+to+database
physical path shows as E:\visE\jqproject\web\13.141.xxx.xx\visEupload.php
Login Method and user Anonymous.
When I change the url to just be
    localhost/viseUpload.php
it's getting HTTP Error 404 not found. Any ideas why it's not finding the visEupload.php file? It has the correct .php extension. In file properties it's a type php file with name visEupload.php.
I took a look at
[404 error][1] but I see my "allowUnlisted="true" in applicationHost.config. I'm not using sitefinity, though.
I'm not sure if something got over-written when we did a server windows update.
I know we were having a problem with get and post a couple months ago and we had to add them to the IIS Manager Handler Mappings somewhere, but don't remember where we added them to check. Since I tried directly accessing the visEupload.php without any
get (and commented out get code in the file) it should have worked if that was the issue.
We are running server 2008 R2 and I'm not sure which version of IIS it is.
In case it matters, this is the contents of the visEupload.php:
    <!DOCTYPE html>
    <html lang="en" >
    <head>
    <meta charset="utf-8" />
        <title>Big Table</title>
    </head>
    <body>
    <?php
        require_once( "../classes/class.OLAPdatabase.php");
        require_once( "../common/Session.php");
        $OLAPdb = new OLAPdatabase;
          handling of the get part is commented out
       ?>
    </body>
All I can think of is that when I access visEupload.php it's running from the get/action in table.php. This might be a different user running in the system. I tried changing visEupload.php file properties to have full control for IUSR and Internet
Guest Account. It already has full control for System, and me. Users have read & exeture and read permissions. Or maybe it's something that has to do with how the directory is mapped out. I'm not sure what could be affecting this, and
why the message said it can't find the path to 403_error.html.
[1]: http://www.sitefinity.com/developer-network/forums/bugs-issues-/server-error-404---file-or-directory-not-found
Michele Cleary

Hello,
for IIS question better ask in http://forums.iis.net/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

Parsing Error: Unexpected $ at the end of PHP file

I have been programming in PHP for about 6 months now and this is a first for me.
I have created a FTP upload PHP file and I keep getting this parsing error no matter what I do !?
Parse error: parse error, unexpected $ in ................................./html/upload_video.php on line 183
The only thing I have on line 183 is ?> The end of my PHP file. I've spent 2 hours trying to get rid of this problem.
HELP ! Any help would be greatly appreciated !

You are right and very sarcastic at the same time. My bad....however, I figured out the problem, I did not close out my mysql connection and I had an extra if "}" at the end of my code.

Error 500 with .htaccess and +FollowSymlinks

Hi, I'm doing a website for a community of gamers and I have one .htaccess on the root folder of the website that cointains parameters to allow using friendly urls. The content of the .htacces is this:
RewriteEngine On
Options +FollowSymLinks
RewriteBase /~doodom/doomhispano/
Rewriterule ^administracion/$ ?administracion
Rewriterule ^articulos.html$ ?articulos
Rewriterule ^descargas.html$ ?descargas
Rewriterule ^foro/$ ?foro
Rewriterule ^foro/(.*)/(.*)/(.*)/(.*).html$ ?foro&cat=$1&sub=$2&thr=$3&title=$4
Rewriterule ^foro/(.*)/(.*)/$ ?foro&cat=$1&sub=$2
Rewriterule ^foro/(.*)/$ ?foro&cat=$1
Rewriterule ^juegos.html$ ?juegos
Rewriterule ^logout.html$ logout.php
Rewriterule ^noticias/$ ./ [R]
Rewriterule ^noticias/(.*)/(.*).html$ ?noticias&id=$1&title=$2
Rewriterule ^noticias/archivo(.*).html$ ?offset=$1
Rewriterule ^perfil/$ ./ [R]
Rewriterule ^perfil/(.*).html$ ?perfil=$1
Rewriterule ^preferencias.html$ ?preferencias
Rewriterule ^registro.html$ ?registro
The problem is that Apache delivers an Error 500 and I don't know why. It always happen when I have uncommented this line:
Options +FollowSymLinks
If I comment it the website loads correctly, but the friendly urls don't work at all.
I also paste the content of my /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 81
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride none
Order allow,deny
Allow from all
</Directory>
<Directory "/home/*/public_html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# PHP 5
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And if I check the error_log I can see the following:
[Tue Jun 02 23:32:39 2009] [alert] [client xx.xx.xx.xx] /home/doodom/public_html/doomhispano/.htaccess: Options not allowed here
Why does this happen? Any ideas?
I've searched all along the Internet, I have tried it out everything but still nothing.
Thanks in advance for your help.
Last edited by [DoodoM] (2009-06-02 19:48:42)

Uhm... what's an /etc/httpd/conf/httpd.conf?
If I had that error, I'd look into /etc/apache/sites* and see if for the site changing follow-symlinks and everything is allowed.
Then again, that's not an arch server, so you might be better of ignoring me (if your... stuff... is all that different. Me did my server strange chaos admin method like )
Edit: wah, now I've been confusing myself, that huge config file is a mess in my eyes - are you sure you're supposed to change stuff in there? What folder is your htaccess in? Most I saw look about like that in there...:
<Directory "??????">
Options Indexes FollowSymLinks
AllowOverride none
Order allow,deny
Allow from all
</Directory>
Which isn't a thaaat good for using .htaccess.
Last edited by whoops (2009-06-02 20:01:58)

TM Error. An error occurred while linking files on the backup volume

I have a 1TB Time Capsule. It's been working great for over a month. I'm now receiving an error.
Time Machine Error
Unable to complete backup. An error occurred while linking files on the backup volume.
I don't know what has happened to cause this error. Does anyone know what has happened and how to fix this? The first time I received this error was when it showed under Available it had over 500 GB and was backing up 89.1 GB. Then the error. The backup scheduled time came up and TM started to backup again. Again with the error. The next time it backed up I made a note of the figures it showed. It starts the backup process "Preparing" and shows under Available 389.1 GB of 929.5 GB. Then Preparing shows that it's backing up, 13.5 GB. Then I get the error pop up. I check Time Machine and under Available it shows 370.3 GB of 929.5 GB. The scheduled time came up again. Available shows 370.3 GB of 929.5 GB and that it's backing up 18.9 GB. I'm trying to see if there is a pattern, for instance 389.1 GB - 370.3 GB = 18.8 GB. It's not 18.9 GB, but it's close. I'm wondering if there is a point which causes the backup to fail and figure out if this can be fixed. I'm stumped. The backups keep getting an error but the Available amount keeps getting lower. Again, any help would be appreciated. Maybe you see something I don't. Thank you.

I forgot to state this in my post; what I noticed beside "Latest Backup", is that it states "Failed ! (! is in a red circle)". (So why does the "Available" amount keep going down? Where is the disk storage space going if it's not backing up?). It started the backup again, it initializes "Latest Backup" by showing a blank. I was curious what it showed when I went into Enter Time Machine. I guess the last good backup was Sunday July 27, 2008 11:21 PM. That's what it shows prior to the NOW selection on the right. The Oldest Backup is June 19, 2008. I thought this might be useful to note.
I thought it would be a good idea to see what Time Machine is doing and record the steps. I know it will involve time and patience, but hopefully I'll find out something. It might be of use to someone.
- It's backing up again and it gets to the point showing that it backed up 18.8 GB of 18.9 GB and stays there for 20 minutes or so.
- Then it shows 18.9 GB of 18.9 GB, and stays at that point for a while.
- Available shows 351.5 GB of 929.5 GB.
- The Failed ! comes up again in Latest Backup. and backup stops.
- Again it looks like the disk storage is used up. (So the questions would be; 1. If the backup failed, where is the space going if the backup failed? 2. How can I get back what should be available and have it show the correct available amount?
It came up to the time it backs up again. It shows that the backup amount will be 18.9 GB. I turned Time Machine OFF. It looks like it will do the same thing. Does anyone know what is happening and what needs to be done to correct this and get my available space back with it recording the correct available amount (xxx.x GB of 929.5 GB)

Problems with MI 70 SP 16 and DB2e 912. Error: 500. XMAU/home/home_mgmt.do

Hi,<br>
i have problems with my MI and DB2e.<br>
I installed database DB2e but i cannot do that this work.<br><br>
My configuration is:<br>
Mobile Infrastructure version: MI 70 SP 16 Patch 0<br>
DB2e 9.1.2 <br><br>
When i want to access to the application, i getting the following error:<br><br>
Error: 500<br>
Localizacion: /XMAU/home/home_mgmt.do<br>
Error interno del servlet:<br><br>
java.lang.NullPointerException<br>
     at com.sap.mbs.mam.bo.impl.Mam090ManagerImpl.getMam090s(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.process.impl.UserCustomCache.getUserCustomizing(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.process.impl.UserCustomProcessImpl.getUserCustomizing(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.process.impl.GenericCustomCache.getMamScenario(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.process.impl.GenericCustomCache.getDeviceSettingsProfile(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.util.DateTimeUtils.getDeviceSettingsProfile(Unknown Source)<br>
     at com.sap.mbs.mam.cstm.util.DateTimeUtils.getDateFormat(Unknown Source)<br>
     at com.sap.mbs.mau.application.impl.MauApplicationImpl.init(Unknown Source)<br>
     at com.sap.mbs.mam.application.web.FrontServlet.init(Unknown Source)<br>
     at com.sap.mbs.mau.application.web.FrontServlet.init(Unknown Source)<br>
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)<br>
     at org.apache.tomcat.core.ServletWrapper.doInit(ServletWrapper.java:317)<br>
     at org.apache.tomcat.core.Handler.init(Handler.java:215)<br>
     at org.apache.tomcat.core.ServletWrapper.init(ServletWrapper.java:296)<br>
     at org.apache.tomcat.core.Handler.service(Handler.java:254)<br>
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)<br>
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)<br>
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)<br>
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)<br>
     at mam_0005fstart._jspService(Unknown Source)<br>
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)<br>
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)<br>
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)<br>
     at org.apache.tomcat.core.Handler.service(Handler.java:287)<br>
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)<br>
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)<br>
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)<br>
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)<br>
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)<br>
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)<br>
     at java.lang.Thread.run(Unknown Source)<br><br>
and in the trace log, i'm getting the following message:<br><br>
[20100316 13:57:36:792] D [MI/API/Services ] CREATED MEPropertyResourceBundle com.sap.ip.me.api.services.MEResourceBundle$MEPropertyResourceBundle@111bfbc for bundleName: MAUText with Locale: _es <br>
[20100316 13:57:36:792] D [MI/API/Services ] CREATED parent MEPropertyResourceBundle for child bundle: com.sap.ip.me.api.services.MEResourceBundle$MEPropertyResourceBundle@111bfbc using bundle name: MAUText <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Create MEResourceBundle(ZMAMText, es_AR, com.sap.ip.me.core.Startup@9664a1) <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Use classloader com.sap.ip.me.core.Startup@9664a1 <br>
[20100316 13:57:36:792] W [AppLog/MI/API/Services ] cannot find resource bundle ZMAMText_es_AR <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Create MEResourceBundle(ZMAUText, es_AR, com.sap.ip.me.core.Startup@9664a1) <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Use classloader com.sap.ip.me.core.Startup@9664a1 <br>
[20100316 13:57:36:792] W [AppLog/MI/API/Services ] cannot find resource bundle ZMAUText_es_AR <br>
[20100316 13:57:36:792] D [Unknown ] FrontServlet:setResourceBundle() done. <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Create MEResourceBundle((null), es_AR, (null)) <br>
[20100316 13:57:36:792] D [MI/API/Services ] MEResourceBundle:Constructor: Use classloader com.sap.ip.me.core.Startup@9664a1 <br>
[20100316 13:57:36:792] I [MI/API/Services ] Cannot find resource key LIST_TAG_TOTAL within MAUText <br>
[20100316 13:57:36:792] I [MI/API/Services ] Cannot find resource key LIST_TAG_PAGE within MAUText <br>
[20100316 13:58:11:215] D [MI/Core ] Deactivated application XMAU <br>
[20100316 13:58:11:215] P [MI/Core ] Set current MSD to Name: / MOBILEENGINE_JSP (V. 70160), Target=, Type=com.sap.ip.me.core.FrameworkApplicationType <br>
[20100316 13:58:11:215] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP' <br><br>
Someone can i help me?<br>
Thanks for your help.<br>

I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs.

HTTP Error 500: Internal Server Error

When going to webmail.nc.rr.com I get HTTP Error 500: Internal Server Error.

Hello,
This error is usually caused when people are on a BES (as opposed to BIS).
The BES needs to be reconfigured to allow the Proxy to allow you access.
The MDS needs to have configuration changes.
Sometimes this is caused by your Blackberry server being an earlier version than 3.6. Upgrading to BES 3.6 or later will fix this issue (http://www.blackberry.com/btsc/KB02025).
Alos, get your BES ADMin to refer to the following link and see the note at the bottomof the webpage:
(Note: Incorrect or invalid encryption types within the krb5.conf file can result in HTTP 500 errors when attempting to browse to websites that require Kerberos authentication.)
http://www.blackberry.com/btsc/KB15642
Hope that helps!
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Using Captcha within a .php file form

Hello all - I need to add a captcha to an existing php form. The form is located in a .php file. I know this issue is not a Dreamweaver problem per se, but hoping someone here has had some experience with Captcha and .php files.
when I add the following to the <form>
require_once('recaptchalib.php');
$publickey = "your_public_key"; // you got this from the signup page
echo recaptcha_get_html($publickey);
I end up with a blank white page. Note: the public key has been added in my file.
There is a note in the tutorial that states:
<html>
    <body> 
      
It is my understanding that <html> and <body> cannot/should not be added to .php pages. If this is true, can captcha work within a .php file?
Thanks in advance for any and all help.
Gene

genoMU69 wrote:
Nancy - thanks.
What you're saying make sense.
When I added the code below:
require_once('recaptchalib.php');
$publickey = "your_public_key"; // you got this from the signup page
echo recaptcha_get_html($publickey);
to the form with my actual public key included
and:
<?php
require_once('recaptchalib.php');
$privatekey = "your_private_key";
$resp = recaptcha_check_answer ($privatekey,
                                $_SERVER["REMOTE_ADDR"],
                                $_POST["recaptcha_challenge_field"],
                                $_POST["recaptcha_response_field"]);
if (!$resp->is_valid) {
    // What happens when the CAPTCHA was entered incorrectly
    die ("The reCAPTCHA wasn't entered correctly. Go back and try it again." .
         "(reCAPTCHA said: " . $resp->error . ")");
} else {
    // Your code here to handle a successful verification
?>
to the verify php, with the private key inserted,
I end up with a blank white page, the form dissapears. I thought maybe it was because the html and body tags were not included with the parent page (of which the form is a part of)
I will inbox you the parent form page so that you can see what I'm working with. Thanks again for you help.
G
At this stage I'd do a test.
Just include the form and captcha stuff in a page on its own and see what the results are. (obviously include the <body><html> tags.
If it works that means there is a problem with your real set up. If it doesnt it means there is certainly a problem with the way you have captcha set up.

Cant get on to ANY internet functions. Error 500

Hey everyone. I have the Curve 8330 through Verizon. I have had absolutely no problems with it, until 2 days ago.
Anytime I use google search, or try to access ANY of my Bookmarks, I receive the error:
"HTTP Error 500: Internal Server Error".
(It goes on to just say that a problem was encountered, etc.)
I ran a diagnostics test and these were the results:
Starting Time Stamp: October 17, 2009 5:00 PM
Ending Time Stamp: October 17, 2009 5:02 PM
PIN: xxxxxxxx
MSISDN: 480 766 1033
Device Type: BlackBerry 8330
Application Version: v4.5.0.77
Platform Version: 3.2.0.51
Service Books: WAPPushConfig,MMS,WPTCP,IPPP,BBIMConfig,BrowserConfig,YHO,LbsConfig,BBIMConfig,BrowserConfig,BBIMConfig,BBIM,BBIM,BrowserConfig,OTASL,IPPP,BrowserConfig,PROVISIONING,CMIME,CICAL,CMIME,CICAL
Free File Space: 21521598 bytes
Radio Data Activation: Yes
Signal Level: -80 dBm
Radio Access: EVDO
Network: Verizon Wireless
IP Address: 97.149.166.145
ICMP Ping Echo: Yes
BlackBerry Registration: Yes
Connected to BlackBerry: Yes
BlackBerry PIN Email: Yes
Server Name: GBISXNAC01S07
Email Address: [email protected]
Connection to [email protected] : No
Server Name: GBISXNAC02S06
Email Address: [email protected]
Connection to [email protected] : No
(I blanked out my pin and emails for privacy)
Does anyone have any idea of what is going on? I am still receiving emails, but I cannot do anything with the web or browser.
Thanks!
Solved!
Go to Solution.

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc.
When you have anomalous behavior in your BB a battery pull often helps to clear it up.
If that doesn'n't help, take a look at this kb article: Http: error 500
Let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Error 500: Blank PHP File

Similar Messages

Maybe you are looking for