Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -

So I got this error code when trying to create an exe. file....any help
Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Create_Build_Application.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: Generic file I/O error.
=========================
NI-488: I/O operation aborted.

Did you try a search?

Similar Messages

Error 1 occurred at AB_Destination.lvclass:

during the build (source distr) the folliwing pops up:
Error 1 occurred at AB_Destination.lvclass:Copy_File.vi -> AB_Source.lvclass:etc etc...
It first made a path and a file in build directory:
C:\builds\Program Files\National Instruments\LabVIEW 8.5\resource\visarc
then I deleted it - then this problem started popping.
restoring this directory and file does not help....

thanks. this helps.
I know the following might be slightly off the topic but I can;t find a way to add to the source distribution the directory containing .txt files neccessary for the operation of the code.
Help says:
From the Project Files tree, select the items you want to define as always included. You also can select multiple files in the Project Files tree to add several files at one time to the Always Included or Always Excluded listboxes.
But in source files I can select only the main VI and then in source file settings I have Main VI and dependencies (other sub-VIs).
I must say that LV 7.1 was much better for all this stuff - more intuitive.
I'll appreciate any and all suggestions.

Error 6 occurred during build of compact FieldPoint executable

I am building my executable for the compact FieldPoint and I received the following build error:
[ERROR]
Code:6
An error occurred while saving the following file:
C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\Utility\SMTP\smtpeml.llb\SMTP Email Get Case Insensitive Search Pattern.vi
Invoke Node in AB_Source_VI.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_RTEXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_RTEXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
<APPEND>
Method Name: <b>Save:Target Instrument</b>
<Call Chain>Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_RTEXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_RTEXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Item_OnDoProperties.vi -> AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: Generic file I/O error.
=========================
NI-488: I/O operation aborted.
Any ideas what caused this or how to fix it?

Hi Carol
I encountered an error similar to this when i was working with CD and SIM, I solved the problem by building the executable from the C: drive concluding that the file reference was too long.
http://msdn.microsoft.com/en-us/library/aa365247%28VS.85%29.aspx
Be sure to also disconnect all type definitions in Application Builder.
Message Edited by Eric_R on 10-12-2009 03:22 PM
Thank You
Eric Reid
National Instruments
Motion R&D

Error 7 occurred when building Exe in LabVIEW2010 SP1

Hi All,
I wanted to build an Exe for my Application. When I created an Exe and give Generate Preview, I got the following warning.
Further, I tried to delete most of the code and give generate preview
I didnt get any warning but I dont know, What is that empty file under data folder? Please explain if any one know the reason
Then I build the Exe, the following error is popped up.
Error copying files.
Source: D:\Test Exe\SC\SubVIs\
Destination: D:\Test Exe\Exe\data\
source does not exist
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at AB_Destination.lvclass:Copy_File.vi -> AB_Source.lvclass:Copy_SourceItem.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface."
Herewith I have attached the LabVIEW code (LV 2010 SP1) which I extracted from my Project.
I browsed our ni forum and the answers posted couldnt sort my problem.
Thanks for your reply in advance
Thanks,
Charu Praba
Attachments:
Test Exe.zip ‏9 KB

Hi Rob,
For some reason there's an issue with the link to the lvdaq.dll in your
application. The lvdaq.dll is used by the DAQ VIs from the palette -
are you by any reason calling the DLL directly from a Call Library
Function Node?
Can you please explain what changes you made to the VI that caused the
issue. It would also be a help if you submit the VIs that you are
trying to build into an executable, thanks.
- Philip Courtois, Thinkbot Solutions

Error 8 occurred at Invoke Node in AB_EXE.lvclass:Build.vi- AB_Build.lvclass:Bui

During software build to make exe file, I got the following error message:
Error 8 occurred at Invoke Node in AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
Method Name: Build:Application
The vi was working fine before the build. It just access some text files and creates some excel files. No hardware is involved. See if anybody know how to solve this problem. Thanks.

I am using LabVIEW 2014 and have been getting this error randomly, but fairly consistently on a recent build. I searched all over and could not find a solution that worked. However, just through trial and error I discovered that the problem is related to SSE2 Optimization in the Advanced properties window. I can consistently cause this error by enabling this feature and consistently compile successfully when it is disabled. Try turning this feature off and see if it solves the problem.
...UPDATE: After closing and re-opening LabVIEW this error came back, and did not seem to be affected by the SSE2 option. Not that it isn't related, but perhaps not the silver bullet I thought it was.
I also got the error to go away sometimes when I compiled the EXE while the main program VI was open, whereas it gave the error most of the time when no VIs were open...again, nothing seems to consistently solve the problem...there is definitely some kind of bug in the appllication builder, and it seems like there are a lot of people that have been struggling with this for a long time (as far back as LV 8)...hopefully NI eventually finds this bug and squashes it!..although, I doubt that anybody at NI is even looking for it...

Error 7 occurred at Invoke Node in AB_EXE.lvclass

I get the "Error 7 occurred at Invoke Node in AB_EXE.lvclass" error when trying to build an executable in Labview 8.5.1. I can run the application without any errors but when I try to build the executable, I get the error. I have tried a mass compile of the project, tried ctrl + shift + run on the top level vi, and tried to mass compile the folder where the project is located and nothing seems to help. I have also looked at the project dependencies for conflicts and found none. I have made a new project and tried to build an executable from this same code without any luck. How can I get this to build an executable?
The exact error is:
Error 7 occurred at Invoke Node in AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
Method Name: Build:Application

Are you using the Report Generation Toolkit? A lot of error 7's during builds seem to be related to this toolkit. Any dynamically called VI's?
Take a look here and here.
Also search the forums for "error 7" and you'll find some other threads related to error 7 and the application builder.

Error -1 occurred at CDK_Utility_GenerateErrorCluster.vi - IB_Source_Container.lvclass:Report_Preview_Error.vi

All,
I ever built this applicatio software with LabVIEW 2010 successfully.
Now I changed to LabVIEW 2013 and want to build this software again, but encountered this undefined error,
"Error -1 occurred at CDK_Utility_GenerateErrorCluster.vi -> IB_Source_Container.lvclass:Report_Preview_Error.vi"
Anyone has idea what is that for?
Thanks!
Regards,
Ran

I have a similar problem when trying to create an installer. I was lucky once to delete the installer builder and exe builder and recreate it all again and then got it to work. But after a few more builds the error is back and I am stuck.
I blive that this relates to some of the temp. files that LV generates during build, and that they can be manufally deltede and fix the problem.
Error -1 is a great help ;-)
/søren

Error 6 occurred at Copy in AB_Targetfile.lvclass%3APostBuild.vi-%3E AB_Application.lvclass%3APostBuild.vi-%3E AB_Engine_Build.vi-%3E AB_Build_Invoke.vi-%3E AB_Build_Invoke.vi.ProxyCaller

Building an executable(.exe) and getting this error can anybody help::
Error 6 occurred at Copy in
AB_Targetfile.lvclassostBuild.vi->
AB_Application.lvclassostBuild.vi->
AB_Engine_Build.vi->
AB_Build_Invoke.vi->
AB_Build_Invoke.vi.ProxyCaller
Its working with normal cRIO,FPGA interconnected operation

Do you mind providing a little more information on your application? Are you building an RT executable? Is it only a certain project that is affected?
Rob B
FlexRIO Product Manager

Build error after upgrading from 8.2.1 to 8.5 "Error 1055 occurred at Invoke Node..."

After upgrading to 8.5, I'm getting the following error when trying to build an EXE:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1055 occurred at Invoke Node in AB_Source_Library.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Object reference is invalid.
I have been building this application for both Windows and Mac OS, and I even get the same error when building the .app on an Intel Mac.
Things that I've already tried:
* Mass-compiling all my code
* Created the project from scratch
* Enabled each panel of the "diagram disable structure" one at a time and compiled again
Any ideas?

Hi Travis,
Ben’s advice if definitely the best place to start. Error 1055 is a very general LabVIEW error for “Object reference is invalid.” The cause is usually a bad install where important LabVIEW function aren’t placed in the right directory or aren’t installed at all.
Charlie M. CLD

Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
     Get LV Class Default Value.vi
     NI_report.lvclass:New Report.vi
     print report.vi
     EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett Herning

Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File

Error 1003 occurred at Invoke Node

Good morning.
I work with LW8.5 and created with the following architecture:
There is main.vi on the links at the user's calls and runs the other VI.
That is, not directly, these are not included in the VI block diagram main.vi.
In the development of a happening in normal mode, all dynamically called VI,
But once I make EXE, when you try to call the dynamic VI error 1003.
Error 1003 occurred at Invoke Node in Main.vi
Possible reason (s):
LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Open the VI in LabVIEW using File>> Open and verify that it is runnable.
VI Path: C: \ Shaikov \ Labwiev \ builds \ NSIAES \ Initialsettings \ Initialsettings.vi
Show you how to act?
Thank you.

Hello margasan.
In my Projects I use to pass more dynamic and VI classes.
In the attached file - an example of my project:
In the main folder is a folder UpperClass, it is the parent class and child classes and HeirClass.lvclass Heir2Class.lvclass are organized into folders respectively Plugin1 and Plugin2, and these Classes inherit from the parent one and the same WI - UpperClassTest.vi. Plus, this Plugin1 has two, independent from the others, but related classes. A block diagram for an object placed Core.vi UpperClass.
So, here, if you take EXE, making llb files and run them from start VI for each of the Plugin, then everything works OK.
But as soon as I on the block diagram of a Plugin will put any object UpperClass, or one of its nasalednikov, there arises a familiar ERROR 1003. Prompt, plc, margasan I get rid of it in this case?
Attachments:
Example.zip ‏1481 KB

Error 8 occurred at Invoke Node in AB_EXE.lvclass:Build.vi- AB_Engine_Build.vi- AB_Build_Invoke.vi- AB_Build_Invoke.vi.ProxyCaller

Hi there,
Hope someone can help me. I recently upgraded to LV 8.5 and am having a problem building a .exe which has a subvi in it that opens in a new dialog window. When I try to build this I get the following error:
Error 8 occurred at Invoke Node in AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
Method Name: Build:Application
I have built the .exe with the same subVi but without opening it in a dialog window and it works fine., so the problem seems to be linked to the inclusion of the dialog window.
Any advice greatly appreciated
Regards
Tadhg

UPDATe: I can get the .exe to build but now I get an error when I run teh .exe which is shown in the picture attached.
Attachments:
error screen1.JPG ‏122 KB

Error 1430 occurred at Create Folder in Create Directory Recursive.vi

Hi all..
I am facing the error which stated :
Error 1430 occurred at Create Folder in Create DirectoryRecursive.vi->AB_Destination.lvclass:Create_Destination.vi->AB_Build.lvclass:Create_Destinations.vi->AB_Application.lvclass:Create_Destinations.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The path isempty or relative. You must use an absolute path.
<Not A Path>
I have been trying to do all solutions given by error 6 such as check the disconnect type definition and remove unused polymorphic VI instances, generate the absolute path and etc. However the same error still occured.
Please advise guys~ I'm using LabView 2009.

I'm having the same problem when trying to build a RT executable.
I'm using the FTP Put Buffer.vi along with a data to string example I found on the NI website. I can build the executable when I use a constant instead of the data to string but I can't for the life of me figure out why.
Order of pictures:
dataftp.png, which shows the data to string connecting to the data input on the FTP Put Buffer.vi.
vars.png,which shows thevars being placed into an array and connecting to the Convert to String vi.
convert.png, which shows the guts of the convert to string vi.
Attachments:
dataftp.png ‏2 KB
vars.png ‏5 KB
convert.png ‏7 KB

Error 8 occurred when building an executable due to file permission error?

I received this error on executable builds from two different .vis. Other .vis in the project build without incident and the message below doesn't seem to indicate the file that is causing the problem, unless it is the SPT-errors.txt file listed at the end of the error message.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files\National Instruments\LabVIEW 8.5\project\errors\Japanese\SPT-errors.txt

Hi DanielAllis,
Like mentioned earlier, there is most likely an application on the internet that you can find and use where you can see what processes are calling specific files or folders to see if that specific file is being used by anything else. It doesn't sound like this is the root of your problem, but it couldn't hurt to check. Also, I have seen a similar problem to this with someone who was using the software Subversion and Tortoise with their application. I am not familiar with this software in particular, but I have attached a link below that goes through the steps that this other person took to try and fix the same error when having this software on their computer. Let me know if any of this helps!
http://forums.ni.com/ni/board/message?board.id=170&message.id=172537&query.id=115461#M172537
Regards
Noah R
Applications Engineering
National Instruments

"Error 7 occurred at Invoke Node..." when attempting to open .vi for editing

I am attempting to open a vi for editing, and instead the vi is attempting to execute. I get the error:
"Error 7 occurred at Invoke Node in BuildTargetBuildSpecification.vi->BuildXFS.vi"
Possible reason(s): LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
Method Name: Project: Open
When I close the Error Message dialog, Labview terminates.

Hi R.Jay,
Error 7 generally occurs when trying to create an executable when there is an extra instance of a top-level vi. You may need to remove the file as a support file (but leave it as the top level vi).
Are you trying to run an executable that has already been created? Unless you have already built an executable, it should not automatically run when opened. Also, was it built in a previous version of LabVIEW? Sometimes this error can be seen when you upgrade to a newer version without compiling.
Regards,
Lauren
Applications Engineering
National Instruments

Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -

Similar Messages

Maybe you are looking for