After installing OS X Server Bonjour printer doesn't show up

I just recently installed OS X Server 4.0.3. Before I installed it I could see the printer as a Bonjour printer from the Mac Pro and the 4 other Macs on the network. After installing OS X Server on the Mac Pro it cannot see the Bonjour printer. All of the other Macs still can.
The printer was listed in the Printers & Scanners configuration, but since it wasn't working I deleted it to try and set it up again. But now it doesn't show up the in the Printers and Scanners configuration?
Does this have anything to do with OS X Server? Is a port being blocked?
Why isn't the printer even showing up? I have tried connecting the printer to the DSL modem and to the Airport. Neither worked. The other Macs have not lost access.
I've tried resetting the printer, made sure the drivers are up to date. Currently I have to use the Bonjour printing because OKI Data has not fixed TCP/IP (hardwired) printing with Yosemite.
Thanks,
David.

Now that you've turned off File Vault try resetting the printer system: OS X Mavericks: Reset the printing system - Apple.
Also I wouldn't hurt to Boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and disk. Reboot normally afterward.

Similar Messages

After install Crystal Report Server 2011, can not access control tool

After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
Error message:

Seems like webapps are corrupted, Just redeploy the webapps.
refer the below thread to do the same.
http://scn.sap.com/thread/3400477

After installing Final cut server client on OSX 10.6.8 error: Apple QuickTime or the QuickTime Java component is not installed.

After installing Final cut server client on OSX 10.6.8 error: Apple QuickTime or the QuickTime Java component is not installed.
I know this error on windows machines but cannot get a solution for OSX.

I have fixed this by installing the latest combo update

After installing iPlanet Web Server v6 SP2, there is error message: https-admserv60 cannot be found??

After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinaca

this will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors

Printer doesn't show up on my devices

After I updated my laptop to windows verison 8.1, I have not been able to print off my laptop. The printer is an HP lasterjet p1006. When I try to download the printer to my computer, after the download is complete the printer does not show up in my devices. I downloaded the p1006 64-bit. I've tried downloading it a few times and it still has not worked for me. I did not have a problem until I updated my laptop to windows 8.1. Why won't this work?

Hi,
Since already downloaded the driver from web, follow the instruction:
For USB Connection:
1. Close any software programs running on your computer.
2. Click the Download button and save this file
2. Double click on the downloaded file. The self-extracting process will appear.
3. Click to accept the terms in the license agreement. Click Next.
4. Driver installation begins. Driver files are pre-installed during this process.
5. A screen pops up to prompt to connect the USB cable. Insert the USB cable.
6. Device is connected, waiting for PnP to finish installing driver.
7. Click Finish to complete software installation.
OR refer web page 'How to install' section (next to overview):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-55362-7&cc=us&dlc=en&lc=en&...
ExpertOne
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

The printer doesn´t show up at all

My problem: I have tried to install my HP photosmart 8050 printer on my new IMAC version 10.9.4 but it doesn´t show up anywhere on the mac. Not in the menu for softwareupdate or in the map for printers. Its usb connected. I´ve have also tried with the bluetooth function but with no result. What can i do? I have been to the HP support site and found the instructions there and downloaded the relevant driver, but when the printer doesn`t show up its a dead end street:^) Kind regards MummySound

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

After installing latest update the contact photos don't show on incoming call

After installing latest update the contact photos don't show on incoming call

Possible iTunes issue:
Try the following after adding photos.
Go to file
Then Home Sharing
Select photos to share
Click on All Photos already selected Do anyway
When Apply turns black click on Apply
Now go to Apple TV to see if photos there
Or restart iTunes.
Works for me every time photos do not appear on my Apple TV 3
Hopefully will work for you.

Cannot revert to Windows 8 after installing Hyper-V Server 2012 R2

I own a laptop with a pre-installed Windows 8. I've installed Hyper-V Server 2012 R2 on top of it by mistake, and now I would like to get rid of it and revert it back to Windows 8. I've tried doing so by a backup USB, though it doesn't seem to work. Is there
anyway to do this without having to use a disc? I haven't received one when I bought it.
Thanks for any help in advance.

Found something for specific computer. Find similat info for your computer:
Acer Recovery Instructions:
1) Power on the machine
2) At the ACER BIOS screen, press and hold the 'Alt' key and the 'F10' key simultaneously to start Acer eRecovery.
3) Once eRecovery utility is displayed, click 'Restore to Factory Default Settings'.
4) Click 'OK' to continue
5) The recovery process restore a fully functional factory image of Windows.
6) After eRecovery has completed, press 'OK' to reboot the computer.
Acer Recovery Media Purchase Program:
https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer
This site is used for purchasing recovery media for your Acer product.
To get started, please enter the serial number or SNID located on your Acer product and click "Next"
System Information
Get your system information:
http://secure3.tx.acer.com/FindSystem/FindSystem.aspx?title=Information%20About%20Your%20System
Acer Main Support page:
http://www.acersupport.com/
Regards
Milos

Can't print online after installing IE9, HP Deskjet 1050 print scan copy

A week ago or so I installed IE9, had IE7 and it just was not working with allot of web pages so I updated to IE9.
I sell on ebay and I went to make a printing label thru ebays site and I keep getting this error message.
an error has occured in the scrip on this page
line:       2072
Char:    1
error:     class doesn't support automation
code:     0
URL:       res://ieframe.dll/preview.js
Do you want to continue running this script
yes/no
I have just spent 5 hrs online trying to solve this problem. Read many helps/tips and none worked.
Here is just a little of what I have did and nothing worked.
1. uninstalled/installed printer
2. Installed updated software for printer(unpluged printer USB before uninstall/install)
3. Found online that HP printers don't work with IE9, info said to dnlded HP Smart Print 2.1(didn't help after reboot)(also HP web printing was not located in my Added programs, it said to uninstall that first)
4. Had no idea if I had "bing bar" so I found an dnld for Bing Bar.(didn't help after reboot)Bing Bar was also not found on added programs in control panel
5. Uninstalled and installed software for printer again, rebooted and still will not print online.
6. I do have the little HP Smart Print icon on the command toolbar but when ever I clicked on it, it never did nothing.
I am about ready to uninstall IE9. I hate to go back to IE7 but I heard IE8 is junk. Thats why I never installed it.
I have to get it working, I have shipping labels to print.
NOTE: Yes I have spent 6 hrs researching HP's forums, Microsoft forums, and many other forums and nothing works.
P.S. After installing HP Smart Print 2.1 and Bing Bar I did check Manage Addons to make sure they was enabled, they both are.

I have no problem printing anything offline like notebook pages, etc. can't print any online page.
IE9 and HP printers stink as on this past week. I have used HP printers for approx 15 yrs and NEVER had a problem like this before. I will never have a problem like this again, as soon as I buy a replacement NON- HP printer.
I have wasted at least 5 days online researching a fix and I finally found how to get the bing bar so show. In this link http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/bing-bar-wont-display/52f87a48-ef7d-e0..., the guy says check "Enable third-party browser extensions" on Adv. tab in internet options. When I did that the bing bar showed. But doing that puts my PC as more risk.
I also dnlded HP Smart Print and click activate on this page http://h41112.www4.hp.com/smartprint/emea_africa/en/smart.html
THen I dnlded the lasted driver for my HP 1050.....
And it still does not print online pages, let alone my ebay S&H labels. I get error messages. If you want to see those error messages go to this ebay forum link http://forums.ebay.com/db2/topic/Seller-Central/Cant-Print-Online/5200152280?start=24, look for post #31 and all the info is there including photos of the error messages..
YOu don't need a ebay acccount to read the post.
I have had it with this whole mess. Like I said I will be getting a new printer(and it won't be HP either).

Can't login to my account after installing OS X Server

Just some background info:
I have had a mac mini for 2 years now and I backup to an external hard drive using Time Machine. My wife just got a new Macbook Air and I wanted to make sure her she was covered with Time Machine, but without having to unplug my external hard drive or buy a new one exclusively for her. I also don't want to pay the money for a Time Capsule as I already have a fantastic router. I read that I could accomplish what I want using Mac OS X Server and it's centralized Time Machine service.
Well I paid $20, installed OS X Server, created her a user account and enabled the Time Machine Service. I left all other Server services disabled as far as I know... Then I (foolishly?) decided to wipe my external drive with my mac mini's time machine backups figuring it may be best to start with a freshly formatted drive when setting this up. So I formatted my external drive, and started to do my 1st initial backup for my mac mini. I only have about 60GB to backup and it was hanging 1/4 done for hours so I figured something was wrong. I stopped the backup and decided to reboot. After rebooting, I'm prompted to login to my wife's account. This is strange because 1) My mac mini usually auto logs into my account 2) I've never logged into her account on my mac mini. 3) I never intended to have an account for her on my mac mini. So now I have no idea how to login to my mac mini using my username. I tried typing in the password I created for her on OS X server but it says "Your account does not have a valid home directory. Contact your system administrator for more information". All I see is my wife's name and the option to login to her... Which I can't. The only other options I get are Sleep, Restart, and Shut Down. I'm freaking out right now, how can I change the user to my user? Or as the administrator? I can't get into my mac at all right now.
Any help would be greatly appreciated.

Since you erased the external drive that might have had Server's library, I would suggest doing a clean install of the operating system you had on the Mini, then reinstall Server. You can see here on how to create a bootable USB Yosemite drive and here for a clean install of Yosemite.

Unable to connect to network after Installing Oracle VM server 2.2.1

Dear All,
I have downloaded Oracle VM Server 2.2.1 from Oracle E-Delivery Site.
I installed it on one server. But after installing it I am not able to connect to the network.
When I am trying to ping other servers, it says Destination Host Unreachable.
Do I need to install something for NIC like eth0 or xenbr0... or network connectivity?
Can anyone have soluiton of this problem?
Yours views & comments are highly appreciated.
Thanks in Advance.

This is the output of
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 xenbr0
172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 172.16.1.254 0.0.0.0 UG 0 0 0 xenbr0
I checked on other machines on same network, they have configured same netmask configured.

After Installing Leopard my network Brother printer "is always busy"

Hi !
I am using a MacBook Pro and few days ago installed Leopard, it is updated up to 10.5.4 .
After installing it? I realize that my network printer, on a fixed IP, Brother HL-4200CN is not working. The print manager displays the following message:
Network host '193.51.34.13' is busy; will retry in 10 seconds.. and redoes it for ever.
Ping on the IP is ok.
I reinstalled the drivers from Leopard by selecting the printer manager Brother HL-4200CN PS.
Does do anything different. Reinstalled the driver from the original CD from Brother, not mentionning anything younger than OS X 10.2 .
Did not do any good either.
What could I do ?
Thanks for any help.

Hello F:
The only thing I can think of to try is to delete the printer and then reinstall it.
Barry

After installing Lion, my microsoft office suite doesn't work anymore, and show this message: Application Power PC no longer available. How can I resolve it?

Is there any possibilty to recover the use of my Microsoft Office suite, which doesn't work anymore after installing Lion?
The programs display this error message: "no puede abrir la aplicación Microsoft Excel (o any other) porque las aplicaciones Power PC ya no son compatibles"
thanks for your help

You will need to upgrade your suite of MS programs.
Older suites, like MS Office 2004, use program versions written for Macs with PPC processors. In order to use those apps in pre-Lion OS's on an Intel-processor machine, it was necessary to install Rosetta, software designed just for the purpose of using PPC-apps on an Intel machine.
Unfortunately, Lion does not support Rosetta, so those apps no longer work.
Solution - update them to a version which will work in Lion, such as the MS Office 2008 suite, or newer if available.

After installing Appl. Server, there are no EWA Data in Solution Manager

Hello,
my satelite system send the ewa to the solution manager. After installing a second appl. server for the satelite system, there are no data show in the ewa on the solution manager.
In the logfile from the sdccn on the satelite system, you could see that the data was send.
Transfer of session data completed to destination...
On the satelite system i can see, that the ewa contain some data. But in the solution manager the ewa is empty...
Any suggestions ??
Regards
Ronald
Edited by: Ronald Negendank on Mar 23, 2010 11:50 AM

Hello Amber,
sorry for late. I delete the service definiton on both side (solman and satelite system). I rescheduled the tasks and the data was send successfully.
This is a part of the LOG from send the session data
25.03.2010     16:42:09     Transfer of session data completed to destination XXXXX
25.03.2010     16:42:09      > transfer completed
25.03.2010     16:42:09      > transfer for server XXXX completed
25.03.2010     16:42:09     > transferring 000031 functions, 0000144878 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:09      > transfer for server XXXXX started
25.03.2010     16:42:09      > transfer for server XXXXX completed
25.03.2010     16:42:07     > transferring 000197 functions, 0001771754 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:07      > transfer for server XXXXX started
25.03.2010     16:42:06      > transfer data to mapped session ID 0000008719 200 destination XXXXXXXXX
25.03.2010     16:42:06     Transfer of session data started to destination XXXXXXX
But the EWA in the solution manager is still empty...
Regards
Ronald
Edited by: Ronald Negendank on Mar 26, 2010 11:51 AM

After installing Mavericks, office for mac 2008 doesn't work properly

After installing mavericks, office for mac 2008 is slow, unresponsive a lot of the time, and slows my whole mac down if i want to do other things at the same time. Is there a solution that doesn't involve spending loads of money on a newer version of office for mac?

All Good. Are there any pending updates for MS Office by chance? Just check under the Help menu in the top Menu when you open Word.
I highly recommend you to reinstall the latest Office 2008 update > http://www.microsoft.com/en-us/download/details.aspx?id=36897 Note that Office 2008 is not supported by Microsoft anymore (thanks Mende1 for the link)
Pete

After installing OS X Server Bonjour printer doesn't show up

Similar Messages

Maybe you are looking for