Error 6 with Open File

My SW is running on a FP2000 with LV7.1. It generates many text files; periodically, the files are opened, a few lines are added, and the files are reclosed. The program runs fine for 15 minutes or so, then suddenly all "Open/create/replace file.vi" start to fail. I debugged them and i saw that it's "Open File" that fails. From now on it will always generate error 6 for every file, existing or new. I debugged the file paths wired to Open File, they're valid, and there's nothing new with name formats, file sizes, file contents, access mode... Also:
- during this condition, FTP server doesn't work: i can browse the FP disk but can't transfer files
- if i stop the program, FTP starts working again
- if i reboot the FP or simply restart the program, all is ok again (for 15 minutes...)
- if i run the same program under windows, i don't experience the problem
- i've already tried to reformat the flash disk
help!!!

As the error comes up after some time the code has been running and it disappears whenever you restart your target, it appears the problem has to do with something that builds up over time.
I suggest you use the Tools>>Realtime System Manager to track what happens on the FP from a Memory/CPU point of view.
Also, try and see what happens with the attached example on your FP. I tested this on mine and it does not seem to cause any problem.
Attachments:
FileWrite(RT).vi ‏48 KB

Similar Messages

Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

Hi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

What does the error message "Opening file in iCloud(state=5) mean?

I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time. Both devices are synchronized with my PC using Wi-Fi. The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4). Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems. What does this error message mean, and is there a cure for the problem?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

Error " ulimit: open files: cannot modify limit: Invalid argument" when open a terminal window

Every time I open a terminal (bash), it shows error " ulimit: open files: cannot modify limit: Invalid argument". I googled it but did not find the solution that works. My OS is 10.8.2. I followed the instruction here http://wordpress.org/support/topic/upgraded-to-php-530-on-mac-now-no-database-co nnection but it doesn't work.(basically, I just commented some lines in that file). Can anyone help?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Copy and paste the following line into the text box that opens:
mkdir disabled_shell_files; mv .profile .bash* $_
Your old shell initialization and history files will be saved in a directory with the indicated name at the top level of your home directory. Test.

"An error occured opening file".

Hello, I am using flash cs 6 on Win 7, i was working on a project and my machine got shutdown due to lights, now i am getting error "An error occured opening file". Can anybody please help me to recover this file?

There is a way to try to recover it, and it may work. That is to take the couurpt .fla file, rename the ".fla" extension to ".rar" and open it in winrar. (When doing this, at some point yo will get a warning saying "this could damage the file", you can safely ignore this message.) Next, you open the file with winrar, and under one of the drop-dwon menus you have the opition that says "fix". click that. It'll load for a second then say "fix successful". Take the new .rar file that was just made, rename it back to the.fla extention, and try to open it in flash.
I've read where people said it worked, but it never did for me (mine has gotten corrupt twice)

Loadjava Error while opening file: –resolve Exception java.io.FileNotFound

Dears,
I'm having Oracle 11gr2 on Windows 2008r2. I have very strange issue while trying to load ordinary Java source. I get error that loadjava can't open file. I'm using the following command in loading:
%ORACLE_HOME%\dbhome_1\BIN\loadjava -thin -user ORAMQ/***@localhost:1521:DEVAR -verbose -fileout %C:\temp\loadjava-9-MQReasonCodeResolver.java.log C:\src\MQReasonCodeResolver.java –resolve-----
I got the following error in the verbose file out:
arguments: '-user' 'ORAMQ/***@localhost:1521:DEVAR' '-thin' '-verbose' '-fileout' 'C:\temp\loadjava-9-MQReasonCodeResolver.java.log' 'C:\src\MQReasonCodeResolver.java' '–resolve'
creating : source MQReasonCodeResolver
loading : source MQReasonCodeResolver
Error while opening file: –resolve
    Exception java.io.FileNotFoundException: –resolve (The system cannot find the file specified)
creating : –resolve
The following operations failed
     –resolve: opening file-----
The code is very simple and doesn't have any issue:
import java.lang.reflect.Field;
public class MQReasonCodeResolver
    public MQReasonCodeResolver()
    public static final String MQ_EXCEPTION_CLASS = "com.ibm.mq.MQException";
    public static final String RC_FIELD_PREFIX = "MQRC_";
    public static final String RC_VALUE_FIELD = "reasonCode";
    public static String resolve( Exception mqex )
        if ( !canResolve( mqex ) )
            return mqex.getClass().toString() + mqex.getMessage();
        Class class1 = mqex.getClass();
        try
            Field field = class1.getField( RC_VALUE_FIELD );
            Object key = field.get( mqex );
            Field[] fields = class1.getFields();
            for ( int i = 0; i < fields.length; i++ )
                Field ff = fields;
String name = ff.getName();
if ( name.startsWith( RC_FIELD_PREFIX ) && ff.get( null ).equals( key ) )
return mqex.getMessage() + " " + name;
catch ( Exception ex )
return "unknown";
public static boolean canResolve( Exception exx )
Class class1 = exx.getClass();
while ( Exception.class.isAssignableFrom( class1 ) )
if ( MQ_EXCEPTION_CLASS.equals( class1.getName() ) )
return true;
class1 = class1.getSuperclass();
return false;
I load other classes and no issue, even jar files, I don't know what is the problem with this file? Also, it is strange is creating class and loading it has no issue, but the issue comes when resolve.
Can anyone help?

Hi:
Put your -resolve flag at the beginning of the list of arguments.
Latest arguments should be files to be uploaded by loadjava.
Best regards, Marcelo.

Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

Flash CS5 ِAn error occurred opening file and WinRar The archive is either in unknown format or damaged

I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
Thank you so much

do you have a working swf?
if so, you can decompile it and recover some or all your work.
if not, are you able to rename the fla to a rar and then unrar it?

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem :)

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem

hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.

System Check error : Actual open files limit:7000, needed 8000 nodes:

Hi,
System check showing up error 'Actual open files limit:7000, needed 8000 nodes:' in our BIA system.
SAP BIA Admin guide suggested open files limit should not be less than 8000. I verified at OS level
ulimit for open files (-n) is displayed as '8000' which is good.
Please suggest me how to fix this error. What if we increase ulimit value for open files at OS level?
Thanks in advance
Regards,
Srinivas.

Hello Srinivas,
please see SAP Note <a href="http://service.sap.com/sap/support/notes/1273695">1273695</a>.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Cics eventQueue Error - Error in Opening file SYS2.CICS.OCL1012.DEF.NOS.ICS

How can fix this error.
trace ---> onConnect()
trace ---> onBind (BPRM_CICS_EVENT)
eventQueue: trace ---> onBind()
eventQueue: trace ---> onBind NOS name is BPRM_CICS_EVENT
Error in Opening file SYS2.CICS.OCL1012.DEF.NOS.ICSEVENT
[N001] Can't open bprm_cics_event object store.
Failed openning adapter NOS BPRM_CICS_EVENT
acxdisp (2007-03-15T10:55:14.486144): connect --> rc=0

ITunes has stopped automatically syncing new books placed in Library with open file. I have to drag the file to the device to get iTunes to sync the book. Why

iTunes has stopped automatically syncing new books placed in Library with open file. I have to drag the file to the device to get iTunes to sync the book. Why?
Ever since version. 7 iTunes has stopped syncing checked books without dragging them to my iPad. all settings are correct. I have set up 3 new devices and had to direct the new people to drag the books to their iPad. previous to ver. 7 this happened automaticlly just by syncling the device. This issue isn't just on my computer but at least three others. books purchased from apple sync just fine. If is drag the book from the library ad drop it on the device it syncs fine. What a pain if you have added several files now you either have to do the drag drop process for each one as you add it or try and remember which files you added the find them and do the process.
Thanks

Hello BBWEST11,
This may be due to iTunes 11 being set to manually manage content on devices by default.
By default, iTunes 11 and later is set to manually manage your content on your device. Manually managing your device allows you to choose the content you want to have with you.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
Allen

InDesign CC | Error with indd file - "Cannot open the file...Adobe InDesign may not support file format"

I encountered a very strange error with InDesign CC after saving a file created in CS4. I'd attach the file but I'm not sure how to do this, if I'm able to. The file is 44kb and doesn't seem like it should be (file I saved had a large book cover). Now since the original CS4 file was overwritten using InDesign CC, the file is corrupt and I'm getting the error message displayed below. The file is not open within another application. Has anyone gotten this before?

Thanks for your response Peter. Below is the gibber contained in the first four lines. In the first line, where it reads "mimetypeapplication" and then "indesign-idml-package", I would assume that this should've been a valid idml file.
PK *meEËv‰+ + mimetypeapplication/vnd.adobe.indesign-idml-packagePK *meE!t/k {< designmap.xmlÝ[ýrÚH ÿ;y •ê.µ[uk 6¶IÀ)À áb þÈÞÖÖÖ 0e1£ IŽÙ¿ò wUw/—'¹îÑ× cc;gv«²FÝ==¿îéîé CýýíÌ5n¨ô™à ³¼U2 Êmá0>i˜ çÇ?í›† î WpÚ0çÔ7ß ¼®¿'Ì ÆÜ Z s >9Â g” ¦!)q¨¼L ï¢â1%A(é ³RÝ3 O '´á©\Ú*ý°WúÑ4P÷a¬Å lÜËœþ5€™ ÷Ö²¸¿E 1¢[¶˜YMüÔá‡Ôg n1gæZ`‚å ûšLÀ Ó8ìuS 8‹i ©; ¤ð! r~Ê|˜?¤ # ×Œ°\ÂÿöwŒ°62R)ú‚q( 0´i ì†ž’9•0f´k íîÏ ûRŒ úábk¸e\Ñ‘Ñ $ ŽñÃðª×ÿÑ¸©˜Æà¤•Šùð`tŽÚ»åÚîîO•2@ .sÚÂ ²Ã Šó]øT=ƒ³ 0Ä‡ÉÇ •-—r\›b±C:&¡ tfdB‹¥ ÌiÏ f_RŸÊ z4 QÇ¡NŒÓ‹¥Úb6bœ àÈÞ8 ÒäÎŒi{6¿FçØ¡ »O›¡' ¿aŽ‰ëSóàõ«ú)á“ ÅÎO ¿t #>q™?

Sync error with open Office 2011 files

Have recently installed Microsoft's Office:Mac 2011 Home and Business. Have a setup with MA and PHD syncing. Whenever an office file is open FileSync reports a syncing error of that file, which after a while is annoying. Didn't get this with Office 2004. Does anyone have a remedy for this?
Thanks
Tomas

I've not noticed this issue, and I have moved several movies over, and they fall into the 500-600MB range. Have you tried any of the troubleshooting steps? Try to power the phone off/on, then try a reset. That is accomplished by holding down the home button and the sleep/wake button together until you see the Apple logo, then releasing. Ignore the screen with the slide to power off option. If that doesn't seem to do it, it could be one of the files is having a problem. You say that eliminating all of them lets the sync work. Do you have USB 2.0 ports? Try to add just one file at a time to the sync and then see when the sync finally fails. It could be something corrupt in one of the files, and you might be able to elimiate the one by this method. If possible, then redo that particular file, be it a music file from CD or video, and then try again. See if any of this helps.

Error with "Open/Create/Replace File" function with cancel button

I've attached a very simple VI that embodies what I want to do with my Open File function. I simply want to stop the rest of my program (theoretically encased in the Case Structure) from running if the user deigns not to specify a file location.
However, if the Cancel button is clicked an error is produced before the rest of the program runs. If you ignore the error and continue, the "cancelled' variable is appropriately made true and the Case Structure runs properly. I simply want to remove the error message LabView gives me.
Any ideas on why or how?
Solved!
Go to Solution.
Attachments:
Open file test.vi ‏34 KB

The cancel button gives you error code 43 (if I remember correctly). After your file vi's, use the general error handler (GEH) to clear this error (and no other errors). Use
[exception action]=Cancle Error on Match
[exception code]=43
type of dialog=no dialog
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Error 6 with Open File

Similar Messages

Maybe you are looking for