Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

Similar Messages

Program Error- cannot open file? Please help! I lost my whole project!

When I try to open an animation psd file, I keep getting a box that says my request could not be completed due to a program error. The file is 23.7 MB and I am using a PC.... I at least need to get the file open so i can export the animation.

I don't personally know how to repair such a file, but I can suggest a utility that will be able to fetch an uncorrupted backup copy if it is in Window's Shadow copy.
http://shadowexplorer.com/ It's a free and easy to use utility. I personally have it.
Gene

Executing ABAP program in RFC to File

Hi,
In the RFC to File, the RFc is called in the ABAP program.
So when i am executing the ABAP program for the 1st time it doesnt reach PI, only when clicking the execute button multiple times execution reaches PI and a message ID is created along with the required data.
what is the problem? why is it not reaching PI when i execute at the first time itself?

Hi Ravi,
Thanks for the response.
>>> First u have check RFC destinatios wheter it working or not. 1) U r program ID should match with RFc destination and RFC adapter configurations.
I have tested the RFC destinations and it works fine. I have also given the same Program ID in adapter configuration
>>>2)should write commit work at last in the Abap Program.
Commit is present at the end of the ABAP program
Cache refresh was also done. But still facing the same problem.
>>>5)Check in SM58 .
And we are getting the following errors randomly:
Server repository could not create function template for 'ZFN_EXTRACT
Commit fault: com.sap.aii.adapter.rfc.afcommunication.RfcChannelMismatchE

Error in executing ABAP program. Error occurred when creating dataset

hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for help

r u able to figure it out..........i got the same error .......can someone help me fix this issue

Hi,I want ABAP program to create an file of this data and to upload in app

Hi Sir/Madam,
           I want ABAP program to create an file of this data and to upload in application server.this is urgent requirement.plz reply soon. i'll b thankful to u.
Regards,
Vishali

Hi ,
Use this abap code .this will create a file in AL11 that you can use .
data: d_msg_text(50),
      v_string(20000) type c,
      v_filename type rlgrap-filename,
******Create a file on app server
concatenate '<directory name present in AL11 case sensitive>' ' filename.CSV' into v_filename .
condense v_filename no-gaps .
open dataset v_filename for output in text mode
encoding default message d_msg_text.
if sy-subrc ne 0.
write: 'File cannot be opened. Reason:', d_msg_text.
exit.
endif.
****Header for file
concatenate 'information you want to write in file like header etc ' into v_string separated by '|'.
transfer v_string to v_filename.
*****Write data into file by looping an internal table
loop at <internal table > assigning <work area>.
concatenate      <work area>-field name1   <work area>-field name2    into v_string separated by '|' .
transfer v_string to v_filename.
endloop.
close dataset v_filename.
Hope this will solve your purpose.
Regards,
Jaya Tiwari

ABAP programming Error in DTP execution

Hi
When execute DTP on InfoCube it generate following error after approx 10 to 15 minutes:
ABAP programming Error in DTP execution
Screen Shot also attached.
In PSA is shows all records OK (30 records)
What is the solutions?

Hi Imran,
Good to knew you got resolution for this issue.
If you are getting output from above replies mark the correct or helpful answers. So that it will be helpful if some one faces the same issue again. http://scn.sap.com/docs/DOC-46006. You marked your answer as correct now.

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

ABAP Programming Error, OBJECTS_OBJREF_NOT_ASSIGNED, CL_GRFN_FPM_UTIL======

Hi All,
I am running GRC 10.0 SP07 when trying to add a response to a risk I get the following ABAP programming error,
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program           CL_GRFN_FPM_UTIL==============CP
                                                                                |
|    Access via 'NULL' object reference not possible.
You attempted to use a 'NULL' object reference (points to 'nothing')
|    access a component (variable: " ").
|    An object reference must point to an object (an instance of a class)
|    before it can be used to access components.
|    Either the reference was never set or it was set to 'NULL' using the
|    CLEAR statement.
Any help on the error would be greatly appreciated.
Thanx
Warren

Hi Victor,
When I am on a risk in NWBC, I select the "Response Plan" Tab, then when I try create a response I get the error.
This is the error that is displayed:
Error while processing your query
What has happened?
The URL call http://ravenclaw.cqs.co.za:8000/sap/bc/webdynpro/SAP/GRRM_WD_RNP was terminated because of an error.
Note
The following error text was processed in system GRC : Access via 'NULL' object reference not possible.
The error occurred on the application server ravenclaw_GRC_00 and in the work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_OIF_INFO of program CL_GRFN_FPM_UTIL==============CP
Method: GET_INSTANCE of program CL_GRFN_OIF_BASE==============CP
Method: INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_COMPONENTCONTROLLER~INIT_UIBB of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: HANDLEDEFAULT of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06EI2HED04NJ1RLM34O4==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Thanx
Warren

ABAP Programming error UNCAUGHT_EXCEPTION

HI All,
I am trying to install BI content infocube with grouping before and after
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSD_INFOPROV_NOT_FOUND
ABAP Program           CL_RSO_EXCEL_WORKBOOK_PROXY===CP
Application Component BW-WHM-MTD
Date and Time          02.01.2007 04:42:08
SAP Release..... 740
SAP Basis level 0005
Regards
Kuzhanthaivel

Hi,
you can install one by one.
if your facing any problem use the do only necessary objects
please find the below doc it will give an idea.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?overridelayout=true
Thanks,
Phani,

How to set a Executable ABAP Program to run as a Background Batch Job

Hi
Currently I had a Executable ABAP Program which when executed prompts for user to enter selection once entered and executed it will delete user entered selections from a Table.
Now my requirment is to enhance that program to run it as a BACKGROUND BATCH JOB so that there will be an entry in SM37 when the program is executed
How can i achieve this

Hi,
Please refer this link .
It has the steps.
http://sapient.wordpress.com/2007/06/19/how-do-you-set-up-background-jobs-in-sap/
Regards,
SuryaD.

ABAP Programming Error

Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           CL_RSBM_LOG_DTP_DP============CP
Application Component BW-WHM-DST
Date and Time          28.04.2014 15:08:07
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).

Error analysis
    Short text of error message:
    *** Data request to the OLTP ***
    Long text of error message:
    Technical information about the message:
    Message class....... "RSM"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
      "MESSAGE_TYPE_X" " "
      "CL_RSBM_LOG_DTP_DP============CP" bzw.
   "CL_RSBM_LOG_DTP_DP============CM001"
      "ADD_MSG"
If you cannot solve the problem yourself, please send the
following documents to SAP:
Information on where terminated
    Termination occurred in the ABAP program "CL_RSBM_LOG_DTP_DP============CP" -
     in "ADD_MSG".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 111
    of the (Include) program "CL_RSBM_LOG_DTP_DP============CM001".
    The program "CL_RSBM_LOG_DTP_DP============CP" was started as a background job.
    Job Name....... "BIDTPR_1276822_1"
    Job Initiator.. "BWREMOTE"
    Job Number..... 15080600
Source Code Extract
Line SourceCde
   81
   82   l_posit = l_posit + 1.
   83
   84   l_s_mess-requid    = p_requid.
   85   l_s_mess-datapakid = p_datapakid.
   86   l_s_mess-step      = l_step.
   87   l_s_mess-substep   = l_substep.
   88   l_s_mess-runid     = p_runid.
   89   l_s_mess-posit     = l_posit.
   90   MOVE-CORRESPONDING i_s_msg TO l_s_mess.
   91   if not ( l_s_mess-msgty = 'I' or
   92            l_s_mess-msgty = 'S' or
   93            l_s_mess-msgty = 'W' or
   94            l_s_mess-msgty = 'A' or
   95            l_s_mess-msgty = 'E' or
   96            l_s_mess-msgty = 'X' ).
   97     l_s_mess-msgty = 'I'.
   98   endif.
   99   CALL FUNCTION 'RSSM_GET_TIME'
100     IMPORTING
101       e_timestampl = l_s_mess-timestamp.
102   APPEND l_s_mess TO p_t_mess.
103
104   READ TABLE p_t_header INTO l_s_header WITH KEY
105        requid    = p_requid
106        datapakid = p_datapakid
107        step      = l_step
108        substep   = l_substep
109        runid     = p_runid.
110   IF sy-subrc <> 0.
>>>>>     MESSAGE x000(rsm).
112   ENDIF.
113   IF l_s_header-max_state IS INITIAL OR
114      l_s_header-max_state < cl_rsbm_log_dtp_req=>convert_msgty_to_state( l_s_mess-msgty ).
115     l_s_upd-requid     = p_requid.
116     l_s_upd-datapakid = p_datapakid.
117     l_s_upd-step       = l_step.
118     l_s_upd-substep    = l_substep.
119     l_s_upd-runid      = p_runid.
120     l_s_upd-max_state = cl_rsbm_log_dtp_req=>convert_msgty_to_state( l_s_mess-msgty ).
121     APPEND l_s_upd TO l_t_upd.
122     l_header_changed = 'X'.
123   ENDIF.
124   IF l_header_changed = 'X'.
125     IF l_s_header-substep <> '0' AND
126        l_s_header-step    <> '0'.
127       READ TABLE p_t_header INTO l_s_header WITH KEY
128            requid    = p_requid
129            datapakid = p_datapakid
130            step      = l_step

ABAP Programming Error when saving the Process Order confirmation in COR6N

Hello,
We have an issue related to Process Order confirmation using Tcode COR6N. When we enter all the inputs to confirm( Activity, yield and phase) and click on save it gives ABAP Programming Error (Exception condition "SEQ_NOT_FOUND" raised).
Any inputs in this regard, would be appreciated.

Hello
I can observe that you have implemented the report ZOPSECRE and that an inconsistency was found.
This repor corrects inconsistent orders which do not have an operation or a sequence, or the two of them.
The report checks whether there is at least one operation or one sequence and creates both including status objects.
Therefore, you need to have the default valus for the operation generation defined on OPJG for this order type/plant.
BR
Caetano

What does the error message "Opening file in iCloud(state=5) mean?

I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time. Both devices are synchronized with my PC using Wi-Fi. The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4). Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems. What does this error message mean, and is there a cure for the problem?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

Error " ulimit: open files: cannot modify limit: Invalid argument" when open a terminal window

Every time I open a terminal (bash), it shows error " ulimit: open files: cannot modify limit: Invalid argument". I googled it but did not find the solution that works. My OS is 10.8.2. I followed the instruction here http://wordpress.org/support/topic/upgraded-to-php-530-on-mac-now-no-database-co nnection but it doesn't work.(basically, I just commented some lines in that file). Can anyone help?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Copy and paste the following line into the text box that opens:
mkdir disabled_shell_files; mv .profile .bash* $_
Your old shell initialization and history files will be saved in a directory with the indicated name at the top level of your home directory. Test.

Flash CS5 ِAn error occurred opening file and WinRar The archive is either in unknown format or damaged

I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
Thank you so much

do you have a working swf?
if so, you can decompile it and recover some or all your work.
if not, are you able to rename the fla to a rar and then unrar it?

Execute ABAP Program - Error in Open File Cust_Dim.dat

Similar Messages

Maybe you are looking for