Error 7 occurred at Open File+.vi:Open File,NI-488: Nonexistent GPIB interface

I did some clean-up of my computer and have been having issues ever since.
I'm not the one that did the programming; the person who did is long gone.
The VI loads fine but when I hit run I get:
Error 7 occurred at Open File+.vipen File
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
All the necessary VIs are available and I've tried changing all the file calls in the VIs to the new locations but the error is the same.
Any suggestions?
Thanks.

Error 7 is a generic file not found. If it is happening after cleaning up files, more than likely you moved some subVIs called in a main VI to a new location on your computer. If all the VIs are in a project, a possible solution would be to remove the vis in the project directory and add them back to the project as they may be pointing to a previous location where the files were once stored. Perhaps this is what Anon123123123 meant by "linking". Hope this helps.
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

Similar Messages

Error 7 file not found NI-488 nonexistent GPIB interface

I'm trying to use an accelerometers with cRIO through NI 9234. I'm using an Fpga example which I modified according to my characteristics. Till here, everything is OK, nevertheless when I open the Fpga vi file and I run it compilation is not finished and it si returned the next message:
Error 7 occurred at NI_LVConfig.lvlib:Load.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
I have attempted several possible solutions paste in the forums but I have not solved the problem
Attachments:
error 7.docx ‏13 KB

Are you using any filepaths in your application? Does the VI have any subVI's? The error you are getting is triggered by a reference to a filepath. Does your application call a file at any point? You need to make sure that all of the filepaths your application is referencing are in fact the correct location for these files.
Also, you may need to check your Open FPGA Reference VI, which loads a bitfile. Usually, this bitfile relies in the same directory as your LabVIEW Project.
Hope this helps!!
Anuar Rojas
Anuar R.
National Instruments México y Latinoamérica
Ingeniería de Aplicaciones
www.ni.com/soporte

Internal error Occured mapping can not be opened - while opening interface

Hi Gurus,
I Am using ODI 11g to load data from Oracel to Oracel database using different schemas as a source to load facts.
for the first time its loading sucessfully and when i try to open the same interface to see the mapping its showing the errror like *"Internam error Occured mapping can not be opened"*
Tis is very urgent to resolve as per my project neeed.
Please suggest steps : how to resolve the issue.
Thanks in Advance.
regards
sri

While the iTunes app is being updated, you are correct, it cannot be opened.
This is true of all Apple apps on your Mac.
iTunes is not very large compared to other apps. Let it update, then open it.

Error occurred during automatic upgrade of MDL file

The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.

I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
I am absolutely pulling out my hair over this one!!
PC/Win 7 64bit/Adobe XI/Office 2010
I have tried Uninstalling and re-installing
I have tried using an adobe software removal tool
I have tried modifying the security settings in reader
I've tried running repair on MS Office
If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
If you drag and drop the .pdf onto the desktop, and then open it, it opens.
If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
Hypothesis: Outlook 2010 does not like to open Adobe Reader.
SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy! Can anyone help?

Can anyone help with the Photo Book process? I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process. I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files. Please check your network connection and click Retry to resend your files." It fails every time, any advice? My server is TalkTalk which may explain everything !! ?? Help.

Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there.
Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors. Keep that file to compare with the printed copy when it arrives.
OT

Error 1316.A network error occurred while attempting to read the file .msi

Hi to all,
this is my first post on OTN forum! anyway...
My attempt to install Essbase-ExcelAddin-11121 Fail. During the execution of Spreadsheet Add-in the process generate this issue:
Error 1316.A network error occurred while attempting to read the file ...AppData\Local\Temp\_is711B\Setup.msi
i've seen also seen that in the directory AppData\Local\Temp\_is711B\ there is no file called Setup.msi but AppData\Local\Temp\_is711B\Setup.INI
i have to modify the installer?how? anybody resolve this problem?
I checked on google but, at this moment, no results.
thanks for all support
Gaetano

Hello Gaetano,
It sounds like you are using Windows 7 and/or Vista.
When running the installation try to right click on the executable and select "Run as Administrator".
Regards,
John A. Booth
http://www.metavero.com

An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file

Just for the record:
I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
(GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
Best,
Gabriel.

In our case, it was not third party software, but a problem with our router not accepting pings. If you are using a router be sure to set-up Enable WAN Ping Respond, in the advanced settings. I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server. As a result, it would give the message, "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file." You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times). If your packets are blocked, then that is your problem.
I should have suspected it was the connection since the message plainly said, "...check your network connection...". However, I discounted this along with so many others based on the forums, since I could connect to the internet. If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
Good fortune on your road to Macenlightenment!

IPhoto cards: "An error occurred while uploading one of your files."

Hey, all.
I've been trying to print some cards via iPhoto (version 6.0.6) but, while some are successful on the first attempt, others just keep generating the following error message no matter how many times I try them: "An error occurred while uploading one of your files."
I'm at a loss. They assemble fine. They connect fine. They transfer fine. Then I just get this irritating message over and over and over...plus my credit card company keeps calling about "unusual activity" (which would be the multiple "pending" charges for the same dollar amount that each of these tries generate).
I've tried searching these forums and, while others seem to have had this problem, I've yet to read an actual solution.
And I've tried contacting Apple but they've been, in a word, useless. Polite, but useless.
Any suggestions?
Thanks!
Message was edited by: theshadowalker

theshadowwalker
like, say, panning the image
What do you mean by "panning"? The only time I've heard this term is with video, referring to moving the camera from right to left. So, if you can explain how what you mean by this it might help.
While there are reports on this forum about folks having issues uploading, compared to the sheer volume of photo orders Apple process it's quite a small amount, and certainly not enough to suggest a systemic fault.
And I'd already tried removing the pictures and cards from iPhoto, then halving the pictures' size (MB) in Photoshop, then recreating the whole lot from scratch. Still, no effect.
Can you explain how you did this? What interaction have you set between iPhoto and Photoshop?
Other than that: Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
4. What color profile are these images? Have they been processed in Adobe Lightroom or other software before iPhoto? What's the source of the images - Camera? Scanner? Other?
Regards
TD

Error Occured while processing a Request-openning a another coldfusion page from old page link

in one page there is dynamic link in that i want to open anather page...
code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
Error Diagnostic Information
An error has occurred.
HTTP/1.0 404 Object Not Found
this error shows please help me...
i am new in coldfusion.
Thanks.

Hi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia

"Unknown Error Occurred" (13014), when trying to open iTunes.

On my iMac 2Ghz Intel Core Duo, I'm getting a "The iTunes application could not be opened. An unknown error occurred. (13014) ". Does anybody know what that error code means? I would like some idea of what I need to do to get back to using my iTunes library again... Please Help!!!

Try the More Like This section on the right...

I purchased the Adobe PDF Pack but it won't allow me to convert any files to pdf or combine multiple files to into 1 pdf form. It keeps saying "Error occurred while trying to access the file". WHY

I purchased the Adobe PDF Pack for $7.50/month (or $89.99/yr) but it won't allow me to convert any files to pdf or combine multiple files into 1 pdf form. It keeps saying "An error occurred while trying to access the service". WHY is this happening & How can I fix it?

Hi hpmg,
It seems you are trying to access the service via Adobe Reader. Make sure you are signed in with your Adobe ID. Is Reader updated to the latest patch v 11.0.09?
It might be possible that a firewall or antivirus might be breaking the connectivity from Reader to the server.
Try accessing the service from the browser: https://cloud.acrobat.com/exportpdf and check if that works for you.
Regards,
Rave

"An error occurred while restoring from the backup.Files can't be restored"

My 4 month old MacBook Pro 15" running 10.6.2 lobotomized itself and I had to have a new HD put in it. I backed up the old one w/ TM on an external HD. I've tried (by the book, and with direct verbal guidance from the Help People at Apple) to restore the system and files but every time it gets to 10.2% in the restoration process and then I get this message: "An error occurred while restoring from the backup. Please restart." and under the frozen progress bar is the chilling line: "Files can't be restored." I've tried restoring from several dates on the TM backup list but it always stops at 10.2% completion. Help!

Hi.
Start by booting from your SL install disc, and selecting Utilities from the menubar, but before going on to +Restore System from Backups,+ instead select +Disk Utility.+
Make +*absolutely certain+* that your internal HD has the GUID *Partition Map Scheme* and the +Mac OS Extended (Journaled)+ Format (unless you're sure it should be +Mac OS Extended (Case-sensitive, journaled).+
Then do a +*Repair Disk+* (not permissions) on your Time Machine drive.
If that succeeds, quit Disk Utility, then continue with the full restore (per #14 in the FAQ).
But if that finds errors it can't fix, it's possible that +Disk Warrior+ can fix them. It's about $100, and is probably a good long-term investment, but there's no guarantee.
If all else fails, go back to Disk Utility and erase your internal HD, then install OSX. When your Mac restarts, use +Setup Assistant+ to transfer your users, apps, settings, and data from your backups (see #19 in the FAQ).
Then download and instal the "combo" update to get back to 10.6.2. Info and download available at: http://support.apple.com/kb/DL959 (or http://support.apple.com/kb/DL1017 for 10.6.3).
Be sure to do a +Repair Permissions+ via Disk Utility afterwards.

Record lock error occurs randomly, when same task opened in 2 browser tabs

I am having an ADF UI taskflow with two flows(paths):
Flow1 - Edit DFF
ProcessParameters ----> router---> IFEDIT---->SetEditedStatusAttribute MethodCall --> editDFFpage
Flow2 - Manage DFF Accross All Modules
ProcessParameters ----> router---> IFSEARCH---->SearchQuerypanel editbutton>SetEditedStatusAttribute MethodCall --> editDFFpage
These two flows can be triggered from links in a task panel. Screenshot [http://act.us.oracle.com/~vmeka/lockerror/lockerror.JPG]
the method call setEditedStatusAttribute, calls an EOImpl method to set an attribute.
This in turn triggers lock() for all the associated EOs.
In following scenario failure occurs:
->1. Click Edit DFF task and keep the web browser tab/window open - lock is acquired.
->2. Open http://localhost7101/ManageFlex-WebApp_Test-context-root/faces/ManageFlex in another tab/window and open the Edit DFF task. lock is acquired again.
->3. In the same tab re-run the page by removing session details suffix.
Eg. http://dadvml0082.us.oracle.com:7108/ManageFlex-WebApp_Test-context-root/faces/ManageFlex?_afrLoop=19870268404083601&_afrWindowMode=0&_adf.ctrl-state=sbc4nhzgh_116
Remove the end part that starts with ?_afrLoop= and press enter in the Address bar of browser. lock is acquired third time.
->5. This re-runs the page, open Edit task again
->6. Without pressing cancel , open Manage DFF task
->7. Do not perform any search operation and open Edit FF task again. lock is acquired fourth time.
->8. Repeat steps 5-7 a few number of times
In step 5 or 7 I am hitting an exception with following message
JBO-26030: Failed to lock the record, another user holds the lock.
stack: (complete stack at [http://act.us.oracle.com/~vmeka/lockerror/stack1.txt] )
oracle.jbo.AlreadyLockedException: JBO-26030: Failed to lock the record, another user holds the lock.
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1085)
at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:546)
at oracle.jbo.server.EntityImpl.setAttribute(EntityImpl.java:1485)
at oracle.apps.fnd.applcore.flex.dff.model.entity.DescriptiveFlexfieldEOImpl.updateDeploymentStatus(DescriptiveFlexfieldEOImpl.java:1804)
at oracle.apps.fnd.applcore.flex.dff.model.entity.DescriptiveFlexfieldEOImpl.setEditedStatus(DescriptiveFlexfieldEOImpl.java:1753)
at oracle.apps.fnd.applcore.flex.dff.uiModel.applicationModule.DFFSetupUIAMImpl.editDescriptiveFlexfield(DFFSetupUIAMImpl.java:770)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any Idea why the lock error occurs after a few iterations, and not immediately after Edit DFF is opened in a second tab?
Thanks,
vikranth
Edited by: user10124649 on Nov 25, 2009 8:04 AM

Hi,
on the ApplicationModule, did you set the locking behavior to optimistic ? For web applications it should be optimistic and not pessimistic, which is the default setting. Select the AM and choose "Configurations" from the context menu. Click edit and select the property tabs. Look for the locking setting, which should be set to "pessimistic if you did not change it before. Just replace the current value with optimistic
Frank

Iphoto6-an error occurred while updating one of your files (book order)

when trying to order a book the book is assembled but then i get the above error message. it also says please check your network connections and click retry to resend your file. driving me nuts. network connection is fine.
i have successfully ordered a book before. i have checked file permissions, checked files in book by previewing printing it myself. all files are ample size for printing.
i have recently signed up to .mac and that isn't working either, disk login problem. Related??
has anyone else found out how to resolve the book problem?
Will

Like others I have been unable to submit books or calendars for printing to Apple. I get the same error messages that others have received. I use CitiCard virtual credit cards account numbers. I noticed that the funds remaining available for the virtual number I used to try to order the Apple books and calendars has decreased. I tried so many times that CitiCards froze the virtual numbers. I actually tried two different virtual numbers before I realized that Apple was trying to charge each time the transaction failed. So far there appear to be no actual charges to my credit card, but I will be keeping careful look at my account for the next few days.
I am not going to attempt to order Apple books and calendars until posters indicate that the server problem has been resolved. My wife is very disappointed as these books and calendars were to be Christmas presents. We have ordered several books in the past and never had any problems. We may order the book elsewhere but are not aware of other sources for calendars.

Error 7 occurred at Open File+.vi:Open File,NI-488: Nonexistent GPIB interface

Similar Messages

Maybe you are looking for