Error: 824, severity: 24, state: 7

Hi!
We are having trouble with reccuring 824 error message. I run dbcc checkdb on all databases. This reports that every thing is fine. The server has 2 instances and only one is giving the error. The server is running VMware and VMWare tools 9.0.11. I can't find
any additional information in the event log. suspect_pages table is empty for both instances. The instance that works runs a sharepoint database, the instance that fails run a TFS database.
My understanding is that SQL Server is doing a windows API call to perform the I/O operation. Then SQL Server checks if there was any error condition with these calls, if they fail with an operating system error then SQL Server reports and 823 error. If
the windows API call succedes but the data transferred by the I/O operation encountered a logical consistency problem this is reported as an 824 error.
How to debug and fix this error?

Hello,
Error 824 could appear also when checksum for page failed. Not only physical issues on the storage originate those errors,
but partial writes on pages during a computer crash. For more information:
http://www.sqlservercentral.com/Forums/Topic453275-266-1.aspx
(Paul Randal)
Have you used SQLIOSim to see if you can reproduce the error. Enable the stop on error.
http://blogs.msdn.com/b/psssql/archive/2008/12/19/using-sqliosim-to-diagnose-sql-server-reported-checksum-error-824-823-failures.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]

Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

I see error: 3624, Severity: 20, State: 1.in the sql server error logs on secondary host

I see this error: Error: 3624, Severity: 20, State: 1
Complete error in the error log is:
SQL Server Assertion: File: <loglock.cpp>, line=807 Failed Assertion = 'result == LCK_OK'. This error may be timing-related. If the error persists after rerunning the statement, use DBCC CHECKDB to check the database for structural integrity, or restart
the server to ensure in-memory data structures are not corrupted.
SQL Server 2008 R2 with Service pack 2 installed and mirrored.
I see this error in the sql server dump file:
0:000> .ecxr
rax=00000000676a7a6a rbx=0000000003fd3250 rcx=000000001048aaa0
rdx=0000000000000000 rsi=0000000003bbef3c rdi=0000000000000440
rip=000007fefd10940d rsp=000000001048b0b0 rbp=000000001048ca50
r8=0000000000000000 r9=0000000000000000 r10=00000000c000007c
r11=00000000012e98d0 r12=00000000000007c0 r13=0000000000000000
r14=0000000000000000 r15=00000000000007c0
iopl=0         nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00000206
KERNELBASE!RaiseException+0x39:
000007fe`fd10940d 4881c4c8000000 add     rsp,0C8h
0:000> kC 1000
Call Site
KERNELBASE!RaiseException
sqlservr!CDmpDump::Dump
sqlservr!SQLDumperLibraryInvoke
sqlservr!CImageHelper::DoMiniDump
sqlservr!stackTrace
sqlservr!utassert_fail
sqlservr!LogLockCollectionAcquire::Callback
sqlservr!LogLockCollection::ApplyLocks
sqlservr!LogLockCollection::Acquire
sqlservr!DBMRedoManager::AnalyzeLogRecord
sqlservr!DBMRedoManager::RunAnalysis
sqlservr!DBMRedoManager::ApplyLogSegment
sqlservr!DBMRedoManager::Execute
sqlservr!SubprocEntrypoint
sqlservr!SOS_Task::Param::Execute
sqlservr!SOS_Scheduler::RunTask
sqlservr!SOS_Scheduler::ProcessTasks
sqlservr!SchedulerManager::WorkerEntryPoint
sqlservr!SystemThread::RunWorker
sqlservr!SystemThreadDispatcher::ProcessWorker
sqlservr!SchedulerManager::ThreadEntryPoint
msvcr80!endthreadex
msvcr80!endthreadex
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
Not sure what to infer from this. Any help would be appreciated.
Let me know if more info. is needed.
Thanks !!!

I did not have a chance to run that at the time the error happened, now everything is normal. Do you have any idea on what this means?
sqlservr!LogLockCollectionAcquire::Callback
I suggest you to run full DBCC CHECKDB , like I said assertion errors are basically related to Internal SQL Server problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

Troubleshooting Error: 942, Severity: 14, State: 4

Hi all,
I'm in the process of decomission an old SQL Server 2000. I'm migrating the databases hosted in that instance one by one. I have managed various workaround to handle the changed server\instance name. When I complete the process for one database, I put it
offline in the SQL 2000.
I've a trouble with one database, when I put it offline I see into the profiler a lot of error like this (1 error every 1 seconds):
Error: 942, Severity: 14, State: 4
For what I know this error is because somthing is trying to access a database that is inaccessible (in my case offline) but I can't figure from which client the request came!
Please help!

Hello,
If you have the Audit Database Management event selected on Profiler then that error is expected whenever a database if offline.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Help with Error: 35285, Severity: 16, State: 1.

Hello, we started with a 2-node availability group with 1 primary replica and 1 secondary replica in synchronous mode. We then added 1 additional asynchronous replica to our availablility group. Since adding the asynchronous replica, the sql server log
on that replica has been getting constantly spammed with the error messages shown below. It is obsfuscating the sql server error log. What do these errors mean? Are they benign? Is there any way to turn them off or filter them from the log so that we can address
any real issues?
-AlwaysOn Availability Groups connection with primary database terminated for secondary database 'XXX' on the availability replica with Replica ID: {03735ddb-e7c3-4f10-ae49-e0e723d8bf1d}. This is an informational message only. No user action is required.
-A connection for availability group 'HADR' from availability replica 'REPLICA3' with id [BD58E2AB-63BC-41D8-95DA-93F6BDE8B2F4] to 'REPLICA1' with id [03735DDB-E7C3-4F10-AE49-E0E723D8BF1D] has been successfully established. This is an informational
message only. No user action is required.
-AlwaysOn Availability Groups connection with primary database established for secondary database 'XXX' on the availability replica with Replica ID: {03735ddb-e7c3-4f10-ae49-e0e723d8bf1d}. This is an informational message only. No user action is required.
-The recovery LSN (155:2565:1) was identified for the database with ID 24. This is an informational message only. No user action is required.
-Error: 35285, Severity: 16, State: 1.
Thanks for your help!

Perhaps this link helps you.
http://blogs.msdn.com/b/arvindsh/archive/2012/09/26/failover-cluster-instance-alwayson-availability-group-dr-scenario.aspx
This is expected and by-design, the logic being that the FCI already has automatic failover configured between the nodes. The current
implementation of AG doe not allow a failover outside of the FCI nodes.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error: 697, Severity: 21, State: 1

Dear Experts,
I received the following error
Error: 697, Severity: 21, State: 1
An attempt was made to fetch logical page '2382' for database 'saptools' (5), object 'DBH_SNAP_TABLES' (2005579152), index 'DBH_SNAP_TABLES' (0), partition 'DBH_SNAP_TABLES_2005579152' (2005579152) from cache 'default data cache'. Wrong logical page '2398' was found in cache
Acc to Sybase troubleshooting guide, we can restart to clear the memory error.
I want to know if there is any alternative for fixing this error
What could be the root cause/reason for this error to occur?
Why I'm seeing "Wrong logical page '2398' was found in cache" ?
Any insight will be much appreciated
Attachment: errorlog
Regards,
Rajesh

Hello Rajesh,
Its Error:697 again
The Checktable output says:
Checking partition 'DBH_SNAP_TABLES_2005579152' (partition ID 2005579152) of table 'DBH_SNAP_TABLES'. The logical page size of this table is 16384 bytes.
Msg 697, Level 16, State 1:
Server 'E20', Line 1:
An attempt was made to fetch logical page '2382' for database 'saptools' (5), object 'DBH_SNAP_TABLES' (2005579152), index 'DBH_SNAP_TABLES' (-1), partition 'DBH_SNAP_TABLES_2005579152' (2005579152) from cache 'default data cache'. Wrong logical page '2398' was found in cache.
DBCC execution completed.
If DBCC printed error messages, contact a user with System Administrator (SA) role.
Explanation:
This error occurs when Adaptive Server tries to access an object   in cache but arrives at an invalid page. The page number is correct on disk, but it does not match the page number of the page in memory.
Error 697 results in a stack trace and breaks your connection to   Adaptive Server.
Action
Since the problem occurs in cache, it is a soft error. Shut down and restart Adaptive Server to clear the memory corruption.
PS: If this is not working out then you should try with the "saptools" restore from a good backup
Regards
Kiran K Adharapuram

Sql server 2008 R2 SP2 -Error: 18056, Severity: 20, State: 29

HI ,
I am getting this error in sql server 2008 R2 SP2 version .
The client was unable to reuse a session with <SPID>, which had been reset for connection pooling. The failure ID is 29. This error may have been caused by an earlier operation failing. Check the error logs for failed
operations immediately before this error message.
I am getting same error messages but only SPID are different as of my knowledge this error will resolve in SP@ version but seeing now so please let me know how to resolve the issue
Thanks!
Regards,
Suresh

Have you upgraded to cu1 for sp2 yet?
Check this bug - http://support.microsoft.com/kb/2543687
More information -
http://blogs.msdn.com/b/psssql/archive/2013/02/13/breaking-down-18065.aspx
How are you trying to connect? Could you take a look at the physical SQL Server Error log and see if you find any other error?
Check this part of the blog (http://blogs.msdn.com/b/psssql/archive/2010/05/05/error-18056-can-be-unwanted-noise-in-certain-scenarios.aspx)
"If the above error message (note that the state number should reflect 29) is the only message in the SQL Server Errorlog along with no other errors noticed in the environment
(connectivity failures to the SQL instance in question, degraded performance, high CPU usage, Out of Memory errors), then this message can be treated as benign and safely ignored."
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

What is the 'error:9643 severity 16,state 3'

This database is done image (no witness), the main database log error.
Some time ago to have a error:9642 look at the saying is' database mirroring endpoint error in transmissionconnection ', the error of
5, 6 times then no longer prompt.
Today and the emergence of error:9643 data that is' database mirroring transfer manager error'.
The tip: database mirroring to do for a few months, only recently some tips

Hi飞翔的鱼vs,
According to your description, you configured database mirroring without witness. “Error: 9642 database mirroring endpoint error in transmission connection” appeared several times then disappeared. But then error message “error: 9643 database mirroring transfer
manager error” was thrown out in principal database.
From this error message “error: 9643 database mirroring transfer manager error”, it’s hard for us to find the cause of this issue. I would appreciate if you could provide detail error information.
Besides, we can monitoring and then troubleshooting mirroring errors. And about how to monitoring mirroring status, please refer to this link:
http://msdn.microsoft.com/en-us/library/ms365781.aspx.
Best regards,
Qiuyun Yu

Error: 1105, Severity: 17, State:

,I found this error in my sybase log file.
server Can't allocate space for object 'syslogs' in database 'PCD' because 'logsegment' segment is full/has no free extents. If you ran out of space in syslogs, dump the transaction log. Otherwise, use ALTER DATABASE to increase the size of the segment.
Help

Anoop,
Agreed with Bret
You need to increase the log segment if error 1105 is occurring frequently.
(You can send me the ASE errorlog)
steps to increase the log segment (if u are sure abt free space in a device)
use master
go
alter database PCD log on <device name>= <size in MB>
go
If you do not have space left in a device, then we need to create a device in first place using 'disk init' command or we can increase the size of the available disk using 'disk resize' command and then add space to the log segment using 'alter database'command
send me the following output to know which device has free space
sp_helpdevice
go
use PCD
go
sp_helpdb PCD
go
Use the following steps to increase the device space
use master
go
disk resize name = "device_name", size = "512M"
go
NOTE: Make sure you have enough space in the file system
HTH
Rajesh

Error: 18210, Severity: 16, State: 1.

We are getting below error while running red gate backup.
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'SQLBACKUP_******'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.)
I am not getting any clue to resolve this error.

Hello,
Try to reduce the actual values on the following backup parameters as a workaround: max transfer size and limit the number
of threads.
Monitor memory consumption on that server, this may be a possible cause.
Make sure the backup destination is not full.
Examine SQL Server error log and look for error messages prior in time to the one you posted.
Provide the logs created by this backup tool to RedGate Support.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error 824

2015-01-29 17:10:48.72 spid54 Error: 824, Severity: 24, State: 2.
2015-01-29 17:10:48.72 spid54 SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x1557bf72; actual: 0x38e9bca4). It occurred during a read of page (1:370) in database ID 10 at offset 0x000000002e4000
in file 'D:\DBPRICE\PRICE_DATA_TABLE\PRICE.mdf:MSSQL_DBCC10'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately.
Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see

I don't know where this thread originally appeard, but right now it is in the SQL Tools forum, which is not the right place. There is a disaster recovery forum after all.
Anyway, it seems that the database is has a fatal damagae not permitting DBCC CHECKDB to continue. Most likely this damage is due to faulty hardware. The best action in this situation is to restore a clean backup of the database on different hardware, and
leave the current one as is. (Unless you know that there has been some particular event like a power failure.) You will need to run DBCC on the backup to verify that the backup is really good.
Erland Sommarskog, SQL Server MVP, [email protected]

Does anyone know what "STATE 24" means for Error: 1222, Severity: 16?

I am getting Error: 1222, Severity: 16, State: 24 in my sql error log. It happened in the early morning hours and I do not have any idea what might have caused it.
Can someone tell me what STATE 24 means?
Is there a way to initiate a "trace flag" to run in the background capture the lock without placing to much overhead on the server?
Thank you,
Sue

Hello,
The lock request time out is probably set on the application side. Probably the application is using the SET LOCK_TIMEOUT
command.
Try to use SQL Server Profiler to see how this command is used from the application side.
https://msdn.microsoft.com/en-us/library/ms189470.aspx
About what means state 24, please read the following article.
https://msdn.microsoft.com/en-us/library/ms164086.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error: 824, severity: 24, state: 7

Similar Messages

Maybe you are looking for