Error 948 - cannot connect to (dpm server)

A little history 1st:
I am new to System Center DPM, having signed on to a company that uses it on a short term contract.
I was tasked with getting the remote administration working for DPM and accomplished that with no difficulties other than determining that I had to run the launcher as administrator - what apparently the people here did not think of.
This has been working for weeks since I got it set up, now it does not work.
No updates have been applied to either the server or the Windows 7 machines that have had no problems until a couple of days ago.
Now I get the above error.
I can RDP into the server and bring up the console with no problem.
I have verified that there is network traffic between the 2 machines after I run the launcher as an administrator and after a reboot and none before.
Thanks,
Brad
Does anyone have any suggestions on where to look for the problem?

Hi
2 threads you can look at:
http://social.technet.microsoft.com/Forums/en-US/06b61911-61ad-41fc-810a-20c2cd0c6cf1/dpm-2012-remote-administrator-console-wont-keep-the-dpm-server-saved?forum=dataprotectionmanager
http://social.technet.microsoft.com/Forums/en-US/888799e6-53b9-4ce7-b9aa-966725b4b146/dpm-2012-remote-administration-windows-7?forum=dataprotectionmanager

Similar Messages

Load balancing error 88: Cannot connect to message server (rc=9)

Hi,
We are facing a problem in the system object.
initially we created a system object with loadbalancing template ,and everything worked fine, but after couple of months we found a error "Load balancing error 88: Cannot connect to message server (rc=9)", so we have created a Dedicated application server object which resolved our issue.
My question is why has this problem occured, and since my client side has lot number of users and we wish to keep the system back to load balancing object.
How can i make my system object work back, what might be the causes?
Thanks
Srivastsa Kondapally

Load balancing only works if the message server is available and the logon group specified exists as well. If one of those changes, then it will break until you get the values set correctly.

When using my ipod, i get an error message cannot connect to the server

I have an ipad 2 and Ipod touch 4th gen. Safari works fine on the ipad but occassionally, I get an error message of "cannot connect to server" on the ipod when I use safari. But the ipad still can connect with NO problem. Can someone explain why this happens and how to fix it?
Thanks

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Can't open file ... error msg "cannot connect to DDE server"?

I can't open my pdf files from Outlook or just open Acrobat. If it does open, it says Acrobat failed to connect to DDE server? I'm using Acrobat Pro 9.3, I think as it updated. I have Win7 with current updates on a new Sony Vaio laptop.
I looked at the other msgs but I am using Norton Anti-Virus not the one mentioned. I am upgraded to Win7 and IE8. All worked ok before switching to new computer and in starting to use Win7 & IE8.
Thanks!
Sherry
Message was edited by: lilbur
Message was edited by: lilbur

See http://forums.adobe.com/message/5641417#5641417

Logon balancing error 88: Cannot connect to message server(rc=9)

HI.
I AM USING R3 ECC 6.0
PLZ HAVE A LOOK ON BELOW IMAGES.
IN VM WEAR I HAVE INSTALLED THE ECC
THROUGH THE WINDOWS 7 I AM LOGIN ECC 6.0
EVERY TIME WORKING
BUT RECENTLY I BOO MY PC WINDOWS 7
BUT IF I TRY TO RUN THE SAP LOGON
ABOVE ERROR MESSAGE IS COMING.
I SEARCHED IN NET.
SOME BODY SUGGESTED THAT I NEED ADD ONE LINE AT SERVICES. FILE...(PLZ HAVE A LOOK ON 2 IMAGE)
IS IT CORRECT TO ADD THE LINE..
CAN I ADD THIS LINE
SAPMS<SID> 3600/TCP
ABOVE ONE IS CORRECT OR NOT ...
WHERE CAN I ADD IN VM WEAR SYSTEM OR IN WINDOWS 7 SYSTEM.
AND ALSO I AM HAVE ONE MORE DOUBT.
PLZ HAVE A LOOK ON 2 IMAGE..
I AM HAVING 2 SERVICES. FILES..
I NEED YOUR VALUBALE SUGGESTIONS..

Hi,
Please change the <SID> of SAPMS<SID> to the real SID of the target system.
For exmple, if the SID is ABC, then "SAPMSABC 3600/TCP"
And about the port, actually the port should be 36<nn>.
So please find the instance number of your message server.
For example if the instance number is 00, then "SAPMSABC 3600/TCP"
if the instance number is 10, then "SAPMSABC 3610/TCP"
Hope this helps.
Best regards,
Shuai

Error message cannot connect to IMAP server after 31.4.0 upgrade installed

After automatic security upgrade 31.4.0, I get an error message "IMAP server has disconnected. The server may have gone down or there may be a network problem."
No problems until the upgrade.
It is a Mac Mini running 10.7.5
My Mac laptop without the upgrade works fine.

Restart the router and the broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Cannot Connect to B1i Server, The Remote Server Returned an Error 401

Hi,
I have installed the integration package ( Without any errors in the installation) and when I connect to SAP B1 I am getting an error msg "Cannot connect to B1i Server. The Remote server returned an error : (401) Unauthorized" And I am not able to view Dasboards.
Thanks in Advance,
Dasari.

Hi Dasari,
When I had installed, this thread helped me out a lot, you should give it try also -
Re: remote server error: (400) bad request. installing Cockpit
and this
[Guide Deleted 31 OCT 2011 - Contained Out of Date Information]
Edited by: Jason Lax on Oct 31, 2011 10:44 AM

InitCatalog:Cannot connect to the server

Hello,
We have installed BPC 7.0 in 2-server architecture.
First server is VM - Windows 2003 32 bit, it contains
- BPC
- Reporting Services
- Integration Services
Second server is physical. Windows 2003 64 bit, it contains
- SQL Server 2005
- OLAP Server 2005
We have installed also a separate client: admin and office tools.
During opening Excel 2007 (provider Microsoft.ACE.OLEDB.12.0 is installed on first server) we got error:
InitCatalog:Cannot connect to the server 'XXXXX'. The server is either not started or too busy.
After clicking the OK button in the error message, I was further notified that Account dimension member cannot be downloaded and so on.
It looks like similar problem as in this thread: InitCatalog:Cannot connect to the server 'XXXXX'.
But it wasn;t solved.
We got also the same error during processing cubes/dimensions from BPC Administrator.
Can anybody help us solving this problem?
Thanks in advance.

Did you install ADOMD.NET and also the QFE into application server?
ADOMD.Net-KB893091-v8.00.0991-x86.EXE
you can download this from follow link:
http://www.microsoft.com/downloads/details.aspx?familyid=790d631b-bff9-4f4a-b648-e9209e6ac8ad&displaylang=en
You have to reboot the server after the installation of this QFE.
Regards
Sorin Radulescu

BPC cannot connect to ABAP server

Hello Experts,
I'm facing the following issue when installing SAP BPC NW 7.5 SP04
When the installation is done (succesfully) I try to login to the server manager and get following error message:
"Cannot connect to ABAP server; Check your ABAP server configuration"
In the diagnostic, it is also the SAP ABAP Server connection that fails.
I'm installing this with a domain user called BPCADMIN.
In the ABAP system I added this domain user to the UJA3_WRITE_SYS_USERS program.
When I check the table: UJA_SVR_DEFAULT I see 3 times the domain\BPCADMIN user.
In the log file I get following error:
#2.0 #2010 09 03 01:35:41:020#-7:00#Error#ServerMgrService##EPM-BPC-NW##0d55515b-753b-449a-9a0f-1d3781e38f69###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:40:49:608#-7:00#Error#ServerMgrService##EPM-BPC-NW##b22778de-4872-4138-a700-26cd9f8b0d68###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:41:11:327#-7:00#Error#ServerMgrService##EPM-BPC-NW##38dad74d-47bc-48c0-a779-dc5fd2f1ef92###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
Strange enough, a ABAP connection with SAP LOGON works...
Can you please help me on this?
Thanks!
Erwin

HI,
I checked the 3 BPC SAP ID (BPC_SYSADMIN; BPC_ADMIN; BPC_USER). They are not locked.
And all of them are communication users. I set the rules according to inst. guide.
I run the UJA3_WRITE_SYS_USERS program too.
The UJA_SVR_DEFAULT table contains these lines:
ADMIN -> BPC_ADMIN
SYSADMIN->BPC_SYSADMIN
USER->BPC_USER
I tried to login manually with these users, it is OK. (they were dialog users )
(the .Net server and the SAP BI system are not the same machines. I think this is no problem isnu2019t it ) Firewall are off on both machines.
Can I create these users at the .Net server side and login to win server with them?
I set these SAP users to BPC server .BPC_ADMIN is the BPC_ADMIN and so on. Is it OK ?
I have no idea what can be the problem.
How can I check they are BPC specified users or not?

System Update -- Cannot connect to proxy server - SOLVED

I'm on a ThinkPad T61 running Windows Vista. When I try to download from System Update, I always get the error message "Cannot connect to proxy server."
I have tried connecting to the Internet directly via Ethernet rather than through a wireless router--it doesn't make any difference.
I have also uninstalled System Update and then installed the version I downloaded from lenovo.com--same result.
System Update is an exception in Windows Firewall, and I have even tried running System Update with Firewall disabled--ditto.
Can someone please help me?
Message Edited by Tim_Lenovo on 01-29-2008 02:49 PM
Solved!
Go to Solution.

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

Cannot connect to update server

Hello
Since quite some time now, I am getting an error message 'Cannot connect to update server' and therefore not able to update iOS to latest version.
Any suggestions shall be much appreciated,
Thanks,

Yes, still the same error. Not able to update.

Cannot connect to cddb server

I cannot get CD track names and keep getting error message 'cannot connect to CDDB server' anyone know a way around this?
Thanks

I have included the full post as I connot take credit. But the following just worked for me. I have a 2013 model Macbook with iTunes 11.
Good luck.
JWMS1985
Re: Unable to connect to the CDDB server. The network cannot be reached.
Feb 12, 2013 4:05 AM (in response to NZDunc)
I do not know if you have this solved but I may have a solution. I have a MacBookPro early 2011 model with iTunes 11 installed. This is what I did to get it working;
1. Close iTunes
2. Open System Preferences
3. Clicked on Network
4. Select WiFi in the white column on the left
5. Choose the Advanced button in the lower right hand side
6. Press the Proxies tab
7. Choose Auto Proxy Discovery (a tick will apear)
8. Press Ok, then Apply on the Network section and close the window.
9. Relaunch iTunes and see if it connects
Hopefully it works for you.

HP Photosmart 5510 B111a - Cannot connect to the server

My printer is not printing when I email [id] @ hpeprint.com, even though I get the "ePrint Job Received" email, so I investigated it further.
It's on the network because I can access the web page like normal.
Here's what I'm greeted with.
There's a red cross next to the "ePrint", but the network has a green tick. Odd.
I check the "web services" tab...
Again, it shows a red cross and says "fix this".
I click "fix this", which after a little while displays this.
The error says:
Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings.
I know my connection is working as it should be.
I believe the fault lies in the printer, please can you advise further.
Thanks.

I discovered the problem.
I recall the printer had advised me some weeks ago to automatically set a manual IP.
When this was done it seems to turn off DNS settings so it cannot resolve any hostnames and will not access any services even though it is connected to the network.
I restored the IP back to automatic, which allowed me to also set DNS to automatically.
It seems that if you set a manual IP address on the printer, you cannot set the DNS.
Odd behaviour.

TV System Update hangs at 21% with message "Cannot connect to proxy server"

Hi,
just installed TVSU (latest version) on my Thinkpad T40 (with WinXP Pro SP3, German). Installs fine, runs perfect after reboot, recognises the correct model, initiates search for updates and then stops at 21% whilst displaying
"Downloading Packet Information: Lenovo Help Center (1 of 1)".
A few seconds later the error message
"Cannot connect to Proxy Server"
comes up with an OK-Box. Clicking OK terminates the entire update process, however TVSU continues to run properly and the process can be restarted with the identical result. This happens with Kaspersky Firewall on and off, no difference. Even rebooting the system w/o firewall and virus protection and starting afresh does not help either. Tried perhaps 15 times over the last 4 hours with same results. I assume that the error message refers to a proxy at Lenovo since in my local environment there is no proxy involved. The system is known to be free of viruses (clean installation yesterday and virus checked this morning).
Note:
The display/error message above were translated from German into English so the corresponding original English displays/messages may look slightly different.
Any ideas?
Regards from Germany...

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

Error 948 - cannot connect to (dpm server)

Similar Messages

Maybe you are looking for